# plasmac material file
# example only, may be deleted
# items marked * are mandatory
# other items are optional and will default to 0
#[MATERIAL_NUMBER_1]  
#NAME               = 
#KERF_WIDTH         = 
#THC                = 
#PIERCE_HEIGHT      = *
#PIERCE_DELAY       = *
#PUDDLE_JUMP_HEIGHT = 
#PUDDLE_JUMP_DELAY  = 
#CUT_HEIGHT         = *
#CUT_SPEED          = *
#CUT_AMPS           = 
#CUT_VOLTS          = 
#PAUSE_AT_END       = 
#GAS_PRESSURE       = 
#CUT_MODE           = 

[MATERIAL_NUMBER_1]  
NAME               = 1/4 Steel 65A
KERF_WIDTH         = 0.07
THC                = 1
PIERCE_HEIGHT      = 0.15
PIERCE_DELAY       = 0.1
PUDDLE_JUMP_HEIGHT = 0.0
PUDDLE_JUMP_DELAY  = 0.0
CUT_HEIGHT         = 0.06
CUT_SPEED          = 90.0
CUT_AMPS           = 65.0
CUT_VOLTS          = 127.0
PAUSE_AT_END       = 0.0
GAS_PRESSURE       = 0.0
CUT_MODE           = 1.0

[MATERIAL_NUMBER_2]  
NAME               = 20GA Steel FineCut LowSpeed
KERF_WIDTH         = 0.0701
THC                = 1
PIERCE_HEIGHT      = 0.15
PIERCE_DELAY       = 0.1
PUDDLE_JUMP_HEIGHT = 0.0
PUDDLE_JUMP_DELAY  = 0.0
CUT_HEIGHT         = 0.06
CUT_SPEED          = 90.0
CUT_AMPS           = 65.0
CUT_VOLTS          = 127.0
PAUSE_AT_END       = 0.0
GAS_PRESSURE       = 0.0
CUT_MODE           = 1.0

[MATERIAL_NUMBER_3]  
NAME               = 16GA Steel FineCut
KERF_WIDTH         = 0.0455
THC                = 1
PIERCE_HEIGHT      = 0.15
PIERCE_DELAY       = 0.4
PUDDLE_JUMP_HEIGHT = 0.0
PUDDLE_JUMP_DELAY  = 0.0
CUT_HEIGHT         = 0.06
CUT_SPEED          = 250.0
CUT_AMPS           = 45.0
CUT_VOLTS          = 71.0
PAUSE_AT_END       = 0.0
GAS_PRESSURE       = 0.0
CUT_MODE           = 1.0