Error report created by /usr/lib/tcltk/linuxcnc/show_errors.tcl: Print file information: RUN_IN_PLACE=no LINUXCNC_DIR= LINUXCNC_BIN_DIR=/usr/bin LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc LINUXCNC_SCRIPT_DIR= LINUXCNC_RTLIB_DIR=/usr/lib/linuxcnc/modules LINUXCNC_CONFIG_DIR= LINUXCNC_LANG_DIR=/usr/lib/tcltk/linuxcnc/msgs INIVAR=inivar HALCMD=halcmd LINUXCNC_EMCSH=/usr/bin/wish8.6 LINUXCNC - 2.9.2 Machine configuration directory is '/home/cnc/linuxcnc/configs/ProbeBasic' Machine configuration file is 'ProbeBasic.ini' INIFILE=/home/cnc/linuxcnc/configs/ProbeBasic/ProbeBasic.ini VERSION=1.1 PARAMETER_FILE=linuxcnc.var TPMOD= HOMEMOD= TASK=milltask HALUI=halui DISPLAY=probe_basic COORDINATES=XYZ KINEMATICS=trivkins coordinates=XYZ Starting LinuxCNC... Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Starting LinuxCNC IO program: io Starting HAL User Interface program: halui linuxcnc TPMOD=tpmod HOMEMOD=homemod EMCMOT=motmod Found file(REL): ./ProbeBasic.hal Starting TASK program: milltask Starting DISPLAY program: probe_basic hm2/hm2_7i76e.0: Watchdog has bit! (set the .has-bit pin to False to resume) false Clear and load history to list Shutting down and cleaning up LinuxCNC... Running HAL shutdown script task: 713 cycles, min=0.000009, max=0.015122, avg=0.009670, 0 latency excursions (> 10x expected cycle time of 0.010000s) hm2: loading Mesa HostMot2 driver version 0.15 hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.2 hm2_eth: 192.168.1.121: INFO: Hardware address (MAC): 00:60:1b:10:41:d2 hm2_eth: discovered 7I76E-16 hm2/hm2_7i76e.0: Low Level init 0.15 hm2/hm2_7i76e.0: Smart Serial Firmware Version 43 Board hm2_7i76e.0.7i76.0.0 Hardware Mode 0 = standard Board hm2_7i76e.0.7i76.0.0 Software Mode 0 = io_spin Board hm2_7i76e.0.7i76.0.0 Software Mode 1 = io_ana_spin Board hm2_7i76e.0.7i76.0.0 Software Mode 2 = io_enc_ana_spin_fv hm2/hm2_7i76e.0: 51 I/O Pins used: hm2/hm2_7i76e.0: IO Pin 000 (P1-01): StepGen #0, pin Direction (Output) hm2/hm2_7i76e.0: IO Pin 001 (P1-14): StepGen #0, pin Step (Output) hm2/hm2_7i76e.0: IO Pin 002 (P1-02): StepGen #1, pin Direction (Output) hm2/hm2_7i76e.0: IO Pin 003 (P1-15): StepGen #1, pin Step (Output) hm2/hm2_7i76e.0: IO Pin 004 (P1-03): StepGen #2, pin Direction (Output) hm2/hm2_7i76e.0: IO Pin 005 (P1-16): StepGen #2, pin Step (Output) hm2/hm2_7i76e.0: IO Pin 006 (P1-04): StepGen #3, pin Direction (Output) hm2/hm2_7i76e.0: IO Pin 007 (P1-17): StepGen #3, pin Step (Output) hm2/hm2_7i76e.0: IO Pin 008 (P1-05): StepGen #4, pin Direction (Output) hm2/hm2_7i76e.0: IO Pin 009 (P1-06): StepGen #4, pin Step (Output) hm2/hm2_7i76e.0: IO Pin 010 (P1-07): Smart Serial Interface #0, pin tx0 (Output) hm2/hm2_7i76e.0: IO Pin 011 (P1-08): Smart Serial Interface #0, pin rx0 (Input) hm2/hm2_7i76e.0: IO Pin 012 (P1-09): IOPort hm2/hm2_7i76e.0: IO Pin 013 (P1-10): IOPort hm2/hm2_7i76e.0: IO Pin 014 (P1-11): Muxed Encoder #2, pin Muxed Index (Input) hm2/hm2_7i76e.0: IO Pin 015 (P1-12): Muxed Encoder #2, pin Muxed B (Input) hm2/hm2_7i76e.0: IO Pin 016 (P1-13): Muxed Encoder #2, pin Muxed A (Input) hm2/hm2_7i76e.0: IO Pin 017 (P2-01): IOPort hm2/hm2_7i76e.0: IO Pin 018 (P2-14): IOPort hm2/hm2_7i76e.0: IO Pin 019 (P2-02): IOPort hm2/hm2_7i76e.0: IO Pin 020 (P2-15): IOPort hm2/hm2_7i76e.0: IO Pin 021 (P2-03): IOPort hm2/hm2_7i76e.0: IO Pin 022 (P2-16): IOPort hm2/hm2_7i76e.0: IO Pin 023 (P2-04): IOPort hm2/hm2_7i76e.0: IO Pin 024 (P2-17): IOPort hm2/hm2_7i76e.0: IO Pin 025 (P2-05): IOPort hm2/hm2_7i76e.0: IO Pin 026 (P2-06): IOPort hm2/hm2_7i76e.0: IO Pin 027 (P2-07): Muxed Encoder Select #0, pin Mux Select 0 (Output) hm2/hm2_7i76e.0: IO Pin 028 (P2-08): Muxed Encoder #0, pin Muxed A (Input) hm2/hm2_7i76e.0: IO Pin 029 (P2-09): Muxed Encoder #0, pin Muxed B (Input) hm2/hm2_7i76e.0: IO Pin 030 (P2-10): Muxed Encoder #0, pin Muxed Index (Input) hm2/hm2_7i76e.0: IO Pin 031 (P2-11): Muxed Encoder #1, pin Muxed A (Input) hm2/hm2_7i76e.0: IO Pin 032 (P2-12): Muxed Encoder #1, pin Muxed B (Input) hm2/hm2_7i76e.0: IO Pin 033 (P2-13): Muxed Encoder #1, pin Muxed Index (Input) hm2/hm2_7i76e.0: IO Pin 034 (P3-01): IOPort hm2/hm2_7i76e.0: IO Pin 035 (P3-14): IOPort hm2/hm2_7i76e.0: IO Pin 036 (P3-02): IOPort hm2/hm2_7i76e.0: IO Pin 037 (P3-15): IOPort hm2/hm2_7i76e.0: IO Pin 038 (P3-03): IOPort hm2/hm2_7i76e.0: IO Pin 039 (P3-16): IOPort hm2/hm2_7i76e.0: IO Pin 040 (P3-04): IOPort hm2/hm2_7i76e.0: IO Pin 041 (P3-17): IOPort hm2/hm2_7i76e.0: IO Pin 042 (P3-05): IOPort hm2/hm2_7i76e.0: IO Pin 043 (P3-06): IOPort hm2/hm2_7i76e.0: IO Pin 044 (P3-07): IOPort hm2/hm2_7i76e.0: IO Pin 045 (P3-08): IOPort hm2/hm2_7i76e.0: IO Pin 046 (P3-09): IOPort hm2/hm2_7i76e.0: IO Pin 047 (P3-10): IOPort hm2/hm2_7i76e.0: IO Pin 048 (P3-11): IOPort hm2/hm2_7i76e.0: IO Pin 049 (P3-12): IOPort hm2/hm2_7i76e.0: IO Pin 050 (P3-13): IOPort hm2/hm2_7i76e.0: registered hm2/hm2_7i76e.0: Watchdog timeout (5000000 ns) is dangerously short compared to hm2_write() period (5000000 ns) hm2_eth: in hm2_eth_reset hm2_eth: HostMot2 ethernet driver unloaded hm2: unloading Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments Debug file information: Note: Using POSIX realtime hm2/hm2_7i76e.0: Watchdog has bit! (set the .has-bit pin to False to resume) [qtpyvcp][INFO] Logging to /home/cnc/qtpyvcp.log (logger.py:117) [qtpyvcp][INFO] QtPyVCP Version: 0+unknown (opt_parser.py:207) link (updating variable file): Datei oder Verzeichnis nicht gefunden [qtpyvcp.utilities.info][INFO] The machine has 3 axes and 3 joints (info.py:414) [qtpyvcp.utilities.info][INFO] The Axis/Joint mapping is: (info.py:415) [qtpyvcp.utilities.info][INFO] Axis X --> Joint 0 (info.py:423) [qtpyvcp.utilities.info][INFO] Axis Y --> Joint 1 (info.py:423) [qtpyvcp.utilities.info][INFO] Axis Z --> Joint 2 (info.py:423) [qtpyvcp.utilities.info][WARNING] No [TRAJ] SPINDLES entry in INI, using 1 (info.py:127) [qtpyvcp.utilities.info][WARNING] No [DISPLAY] DEFAULT_SPINDLE_SPEED entry found in INI, using 300rpm (info.py:229) [qtpyvcp][INFO] Loading global stylesheet: /usr/lib/python3/dist-packages/probe_basic/probe_basic.qss (application.py:186) [qtpyvcp.hal][INFO] Creating new HAL component: qtpyvcp_manualtoolchange (__init__.py:61) [qtpyvcp.app.launcher][INFO] Loading POSTGUI_HALFILE: /home/cnc/linuxcnc/configs/ProbeBasic/custom_postgui.hal (launcher.py:96) /home/cnc/linuxcnc/configs/ProbeBasic/custom_postgui.hal:6: Pin 'halui.axis.z.minus' was already linked to signal 'jog-z-neg' Failed to load POSTGUI_HALFILE with error: 1 14410 14469 Stopping realtime threads Unloading hal components Note: Using POSIX realtime ----------------------------------------------------------------------- Info report created by linuxcnc_info: The file: /tmp/linuxcnc_info.txt can be posted to a forum or a web site like: http://pastebin.com in order to provide information about the linuxcnc system and configuration. Date: So 24. Mär 15:59:25 CET 2024 UTC Date: So 24. Mär 14:59:25 UTC 2024 this program: /usr/bin/linuxcnc_info uptime: 15:59:25 up 55 min, 1 user, load average: 3,07, 3,38, 3,22 lsb_release -sa: Debian Debian GNU/Linux 12 (bookworm) 12 bookworm linuxcnc: /usr/bin/linuxcnc pwd: /home/cnc/linuxcnc/configs/ProbeBasic USER: cnc LOGNAME: cnc HOME: /home/cnc EDITOR: VISUAL: LANGUAGE: TERM: dumb COLORTERM: DISPLAY: :0.0 DESKTOP: lightdm-xsession display size: 1920x1080 pixels (508x285 millimeters) PATH: /usr/bin:/home/cnc/linuxcnc/configs/ProbeBasic/bin:/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games uname items: nodename -n: cnc kernel-name -s: Linux kernel-vers -v: #1 SMP PREEMPT_RT Debian 6.1.76-1 (2024-02-01) machine -m: x86_64 processor -p: unknown platform -i: unknown oper system -o: GNU/Linux /proc items: cmdline: BOOT_IMAGE=/boot/vmlinuz-6.1.0-18-rt-amd64 root=UUID=f1876674-48f0-47e1-b8dc-2f619ca23b75 ro initrd=/install/gtk/initrd.gz quiet model name: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz cores: 4 cpu MHz: 3842.953 parport: serial: Versions: gcc: gcc (Debian 12.2.0-14) 12.2.0 python: Python 3.11.2 git: not_in_PATH git commit: NA tcl: 8.6 tk: 8.6 glade: not_in_PATH linuxcnc_var all: LINUXCNCVERSION: 2.9.2 LINUXCNC_AUX_GLADEVCP: /usr/share/linuxcnc/aux_gladevcp LINUXCNC_AUX_EXAMPLES: /usr/share/linuxcnc/aux_examples REALTIME: /usr/lib/linuxcnc/realtime RTS: uspace HALLIB_DIR: /usr/share/linuxcnc/hallib PYTHON: /usr/bin/python3 dpkg -l '*linuxcnc*': Gewünscht=Unbekannt/Installieren/R=Entfernen/P=Vollständig Löschen/Halten | Status=Nicht/Installiert/Config/U=Entpackt/halb konFiguriert/ Halb installiert/Trigger erWartet/Trigger anhängig |/ Fehler?=(kein)/R=Neuinstallation notwendig (Status, Fehler: GROSS=schlecht) ||/ Name Version Architektur Beschreibung +++-===================-============-============-===================================================================== un linuxcnc (keine Beschreibung vorhanden) un linuxcnc-dev (keine Beschreibung vorhanden) un linuxcnc-doc (keine Beschreibung vorhanden) ii linuxcnc-doc-de 1:2.9.2 all motion controller for CNC machines and robots (German documentation) ii linuxcnc-doc-en 1:2.9.2 all motion controller for CNC machines and robots (English documentation) ii linuxcnc-doc-es 1:2.9.2 all motion controller for CNC machines and robots (Spanish documentation) ii linuxcnc-doc-fr 1:2.9.2 all motion controller for CNC machines and robots (French documentation) un linuxcnc-sim (keine Beschreibung vorhanden) un linuxcnc-sim-dev (keine Beschreibung vorhanden) ii linuxcnc-uspace 1:2.9.2 amd64 motion controller for CNC machines and robots ii linuxcnc-uspace-dev 1:2.9.2 amd64 PC based motion controller for real-time Linux