Error report created by /usr/lib/tcltk/linuxcnc/show_errors.tcl: Print file information: RUN_IN_PLACE=no LINUXCNC_DIR= LINUXCNC_BIN_DIR=/usr/bin LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc LINUXCNC_SCRIPT_DIR= LINUXCNC_RTLIB_DIR=/usr/lib/linuxcnc/modules LINUXCNC_CONFIG_DIR= LINUXCNC_LANG_DIR=/usr/lib/tcltk/linuxcnc/msgs INIVAR=inivar HALCMD=halcmd LINUXCNC_EMCSH=/usr/bin/wish8.6 LINUXCNC - 2.9.3 Machine configuration directory is '/home/cnc/linuxcnc/configs/Black_Phanter' Machine configuration file is 'BlackPhanter.ini' INIFILE=/home/cnc/linuxcnc/configs/Black_Phanter/BlackPhanter.ini VERSION=1.1 PARAMETER_FILE=probe_basic.var TPMOD= HOMEMOD= TASK=milltask HALUI=halui DISPLAY=probe_basic COORDINATES=XYZ KINEMATICS=trivkins coordinates=XYZ Starting LinuxCNC... Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Starting LinuxCNC IO program: io libnml/buffer/shmem.cc 320: Shared memory buffers toolCmd and toolCmd may conflict. (key=1004(0x3EC)) libnml/buffer/shmem.cc 320: Shared memory buffers toolSts and toolSts may conflict. (key=1005(0x3ED)) libnml/buffer/shmem.cc 320: Shared memory buffers emcError and emcError may conflict. (key=1003(0x3EB)) Starting HAL User Interface program: halui linuxcnc TPMOD=tpmod HOMEMOD=homemod EMCMOT=motmod twopass:invoked with <> options twopass:found ./BlackPhanter.hal Starting TASK program: milltask Starting DISPLAY program: probe_basic not: already exists ['X: Front View', 'Y: Front View', 'Z: Top View', 'Z2: Bottom View', 'P: Isometric'] ['X', 'Y', 'Z', 'Z2', 'P'] ['X: Front View', 'Y: Front View', 'Z: Top View', 'Z2: Bottom View', 'P: Isometric'] ['X', 'Y', 'Z', 'Z2', 'P'] 4 Clear and load history to list Shutting down and cleaning up LinuxCNC... task: 510 cycles, min=0.000007, max=0.010956, avg=0.009486, 0 latency excursions (> 10x expected cycle time of 0.010000s) hm2: loading Mesa HostMot2 driver version 0.15 hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.2 hm2_eth: 10.10.10.2: INFO: Hardware address (MAC): 00:60:1b:10:41:d2 hm2_eth: discovered 7I76E-16 hm2/hm2_7i76e.0: Low Level init 0.15 hm2/hm2_7i76e.0: Smart Serial Firmware Version 43 Board hm2_7i76e.0.7i76.0.0 Hardware Mode 0 = standard Board hm2_7i76e.0.7i76.0.0 Software Mode 0 = io_spin Board hm2_7i76e.0.7i76.0.0 Software Mode 1 = io_ana_spin Board hm2_7i76e.0.7i76.0.0 Software Mode 2 = io_enc_ana_spin_fv hm2/hm2_7i76e.0: 51 I/O Pins used: hm2/hm2_7i76e.0: IO Pin 000 (P1-01): StepGen #0, pin Direction (Output) hm2/hm2_7i76e.0: IO Pin 001 (P1-14): StepGen #0, pin Step (Output) hm2/hm2_7i76e.0: IO Pin 002 (P1-02): StepGen #1, pin Direction (Output) hm2/hm2_7i76e.0: IO Pin 003 (P1-15): StepGen #1, pin Step (Output) hm2/hm2_7i76e.0: IO Pin 004 (P1-03): StepGen #2, pin Direction (Output) hm2/hm2_7i76e.0: IO Pin 005 (P1-16): StepGen #2, pin Step (Output) hm2/hm2_7i76e.0: IO Pin 006 (P1-04): StepGen #3, pin Direction (Output) hm2/hm2_7i76e.0: IO Pin 007 (P1-17): StepGen #3, pin Step (Output) hm2/hm2_7i76e.0: IO Pin 008 (P1-05): StepGen #4, pin Direction (Output) hm2/hm2_7i76e.0: IO Pin 009 (P1-06): StepGen #4, pin Step (Output) hm2/hm2_7i76e.0: IO Pin 010 (P1-07): Smart Serial Interface #0, pin tx0 (Output) hm2/hm2_7i76e.0: IO Pin 011 (P1-08): Smart Serial Interface #0, pin rx0 (Input) hm2/hm2_7i76e.0: IO Pin 012 (P1-09): IOPort hm2/hm2_7i76e.0: IO Pin 013 (P1-10): IOPort hm2/hm2_7i76e.0: IO Pin 014 (P1-11): Muxed Encoder #2, pin Muxed Index (Input) hm2/hm2_7i76e.0: IO Pin 015 (P1-12): Muxed Encoder #2, pin Muxed B (Input) hm2/hm2_7i76e.0: IO Pin 016 (P1-13): Muxed Encoder #2, pin Muxed A (Input) hm2/hm2_7i76e.0: IO Pin 017 (P2-01): IOPort hm2/hm2_7i76e.0: IO Pin 018 (P2-14): IOPort hm2/hm2_7i76e.0: IO Pin 019 (P2-02): IOPort hm2/hm2_7i76e.0: IO Pin 020 (P2-15): IOPort hm2/hm2_7i76e.0: IO Pin 021 (P2-03): IOPort hm2/hm2_7i76e.0: IO Pin 022 (P2-16): IOPort hm2/hm2_7i76e.0: IO Pin 023 (P2-04): IOPort hm2/hm2_7i76e.0: IO Pin 024 (P2-17): IOPort hm2/hm2_7i76e.0: IO Pin 025 (P2-05): IOPort hm2/hm2_7i76e.0: IO Pin 026 (P2-06): IOPort hm2/hm2_7i76e.0: IO Pin 027 (P2-07): Muxed Encoder Select #0, pin Mux Select 0 (Output) hm2/hm2_7i76e.0: IO Pin 028 (P2-08): Muxed Encoder #0, pin Muxed A (Input) hm2/hm2_7i76e.0: IO Pin 029 (P2-09): Muxed Encoder #0, pin Muxed B (Input) hm2/hm2_7i76e.0: IO Pin 030 (P2-10): Muxed Encoder #0, pin Muxed Index (Input) hm2/hm2_7i76e.0: IO Pin 031 (P2-11): Muxed Encoder #1, pin Muxed A (Input) hm2/hm2_7i76e.0: IO Pin 032 (P2-12): Muxed Encoder #1, pin Muxed B (Input) hm2/hm2_7i76e.0: IO Pin 033 (P2-13): Muxed Encoder #1, pin Muxed Index (Input) hm2/hm2_7i76e.0: IO Pin 034 (P3-01): IOPort hm2/hm2_7i76e.0: IO Pin 035 (P3-14): IOPort hm2/hm2_7i76e.0: IO Pin 036 (P3-02): IOPort hm2/hm2_7i76e.0: IO Pin 037 (P3-15): IOPort hm2/hm2_7i76e.0: IO Pin 038 (P3-03): IOPort hm2/hm2_7i76e.0: IO Pin 039 (P3-16): IOPort hm2/hm2_7i76e.0: IO Pin 040 (P3-04): IOPort hm2/hm2_7i76e.0: IO Pin 041 (P3-17): IOPort hm2/hm2_7i76e.0: IO Pin 042 (P3-05): IOPort hm2/hm2_7i76e.0: IO Pin 043 (P3-06): IOPort hm2/hm2_7i76e.0: IO Pin 044 (P3-07): IOPort hm2/hm2_7i76e.0: IO Pin 045 (P3-08): IOPort hm2/hm2_7i76e.0: IO Pin 046 (P3-09): IOPort hm2/hm2_7i76e.0: IO Pin 047 (P3-10): IOPort hm2/hm2_7i76e.0: IO Pin 048 (P3-11): IOPort hm2/hm2_7i76e.0: IO Pin 049 (P3-12): IOPort hm2/hm2_7i76e.0: IO Pin 050 (P3-13): IOPort hm2/hm2_7i76e.0: registered hm2_eth: in hm2_eth_reset hm2_eth: HostMot2 ethernet driver unloaded hm2: unloading Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments Debug file information: Note: Using POSIX realtime [qtpyvcp][INFO] Logging to /home/cnc/linuxcnc/configs/Black_Phanter/machine_log.log (logger.py:117) [qtpyvcp][INFO] QtPyVCP Version: 0+unknown (opt_parser.py:207) [qtpyvcp][DEBUG] Qt Version: 5.15.8 (opt_parser.py:211) [qtpyvcp][DEBUG] Qt API: QT_API (opt_parser.py:212) [qtpyvcp][DEBUG] QtPy Version: 2.3.0 (opt_parser.py:213) [qtpyvcp][DEBUG] Command line options: { "command_line_args": null, "config_file": "/home/cnc/linuxcnc/configs/Black_Phanter/custom_config.yml", "confirm_exit": false, "develop": false, "fullscreen": null, "help": false, "hide_cursor": false, "hide_menu_bar": false, "hide_status_bar": false, "info": false, "ini": "/home/cnc/linuxcnc/configs/Black_Phanter/BlackPhanter.ini", "log_file": "/home/cnc/linuxcnc/configs/Black_Phanter/machine_log.log", "log_level": "DEBUG", "maximize": null, "perfmon": false, "position": null, "qt_api": null, "size": null, "stylesheet": null, "theme": null, "version": false } (opt_parser.py:216) [qtpyvcp.utilities.config_loader][DEBUG] Loading config files: ['/home/cnc/linuxcnc/configs/Black_Phanter/custom_config.yml', '/usr/lib/python3/dist-packages/probe_basic/probe_basic.yml', '/usr/lib/python3/dist-packages/qtpyvcp/yaml_lib/default_config.yml'] (config_loader.py:36) [qtpyvcp.utilities.config_loader][DEBUG] Merged YAML config: default_menubar: - title: File items: - title: '&Open ...' action: win.openFile shortcut: ctrl+o - title: '&Recent Files' provider: qtpyvcp.widgets.recent_files_menu:RecentFilesMenu - title: '&Reload' action: program.reload - title: '&Close' action: program.clear - title: Save &As action: null - separator - title: Edit ToolTable action: win.showDialog args: - tool_edit - separator - title: Exit action: app.exit shortcut: ctrl+q - title: Shutdown action: win.showDialog args: - shutdown - title: Machine items: - title: Toggle E-Stop action: machine.estop.toggle shortcut: F1 - title: Toggle Power action: machine.power.toggle shortcut: F2 - separator - title: Run Program action: program.run shortcut: R - title: Step action: program.step shortcut: T - title: Pause action: program.pause shortcut: P - title: Resume action: program.resume shortcut: R - title: Abort action: program.abort shortcut: esc - title: Optional Stop action: program.optional_stop.toggle - title: Optional Skip action: program.optional_skip.toggle - separator - title: Homing provider: qtpyvcp.widgets.menus.homing_menu:HomingMenu - title: Cooling items: - title: Flood action: coolant.flood.toggle shortcut: F7 - title: Mist action: coolant.mist.toggle shortcut: F8 - title: Set Work Offsets action: win.showDialog args: - set_work_offsets - separator - title: Override Limits action: machine.override_limits - title: Settings items: - title: Show On-screen Keyboard action: settings.virtual-input.enable - title: View items: - title: Show Gridlines action: settings.backplot.show-grid - separator - title: Show Machine Bounds action: settings.backplot.show-machine-bounds - title: Show Machine Labels action: settings.backplot.show-machine-labels - title: Show Machine Ticks action: settings.backplot.show-machine-ticks - separator - title: Show Program Bounds action: settings.backplot.show-program-bounds - title: Use Colors for Motion type action: settings.backplot.multitool-colors - separator - title: Perspective View action: settings.backplot.perspective-view - title: View Angle action: settings.backplot.view - title: Tools items: - title: HAL Meter action: tool.halmeter - title: HAL Scope action: tool.halscope - title: HAL Show action: tool.halshow - title: LCNC Status action: tool.status - title: Calibration action: tool.calibration - title: Classicladder PLC action: tool.classicladder - title: Simulated Probe action: tool.simulate_probe - title: About items: - title: About QtPyVCP action: win.showDialog args: - about_qtpyvcp - title: About Qt action: app.aboutQt vcp: name: Probe Basic version: v0.0.1 author: Chris Polanski description: Probe Basic description ... windows: mainwindow: provider: probe_basic.probe_basic:ProbeBasic kwargs: menu: &id001 - title: File items: - title: '&Open ...' action: win.openFile shortcut: ctrl+o - title: '&Recent Files' provider: qtpyvcp.widgets.recent_files_menu:RecentFilesMenu - title: '&Reload' action: program.reload - title: '&Close' action: program.clear - title: Save &As action: null - separator - title: Exit action: app.exit shortcut: ctrl+q - title: Machine items: - title: Toggle E-Stop action: machine.estop.toggle shortcut: F1 - title: Toggle Power action: machine.power.toggle shortcut: F2 - separator - title: Run Program action: program.run shortcut: R - title: Step action: program.step shortcut: T - title: Pause action: program.pause shortcut: P - title: Resume action: program.resume shortcut: R - title: Abort action: program.abort shortcut: esc - title: Optional Stop action: program.optional_stop.toggle - title: Optional Skip action: program.optional_skip.toggle - separator - title: Homing provider: qtpyvcp.widgets.menus.homing_menu:HomingMenu - title: Cooling items: - title: Flood action: coolant.flood.toggle shortcut: F7 - title: Mist action: coolant.mist.toggle shortcut: F8 - title: Set Work Offsets action: win.showDialog args: - set_work_offsets - separator - title: Override Limits action: machine.override_limits - title: Settings items: - title: Show On-screen Keyboard action: settings.virtual-input.enable - title: View items: - title: Show Gridlines action: settings.backplot.show-grid - separator - title: Show Machine Bounds action: settings.backplot.show-machine-bounds - title: Show Machine Labels action: settings.backplot.show-machine-labels - title: Show Machine Ticks action: settings.backplot.show-machine-ticks - separator - title: Show Program Bounds action: settings.backplot.show-program-bounds - title: Show Program Labels action: settings.backplot.show-program-labels - title: Show Program Ticks action: settings.backplot.show-program-ticks - separator - title: Perspective View action: settings.backplot.perspective-view - title: View Angle action: settings.backplot.view - title: Tools items: - title: HAL Meter action: tool.halmeter - title: HAL Scope action: tool.halscope - title: HAL Show action: tool.halshow - title: LCNC Status action: tool.status - title: Calibration action: tool.calibration - title: Classicladder PLC action: tool.classicladder - title: About items: - title: About Probe Basic action: win.showDialog args: - about_probebasic - title: About QtPyVCP action: win.showDialog args: - about_qtpyvcp - title: About Qt action: app.aboutQt fullscreen: true ui_file: /usr/lib/python3/dist-packages/probe_basic/probe_basic.ui confirm_exit: false data_plugins: status: provider: qtpyvcp.plugins.status:Status kwargs: cycle_time: 75 persistent_data_manager: provider: qtpyvcp.plugins.persistent_data_manager:PersistentDataManager kwargs: serialization_method: pickle settings: provider: qtpyvcp.plugins.settings:Settings position: provider: qtpyvcp.plugins.positions:Position kwargs: report_actual_pos: true use_program_units: true tooltable: provider: qtpyvcp.plugins.tool_table:ToolTable kwargs: columns: TZDR offsettable: provider: qtpyvcp.plugins.offset_table:OffsetTable kwargs: columns: XYZR notifications: provider: qtpyvcp.plugins.notifications:Notifications kwargs: enabled: true mode: native max_messages: 5 persistent: true file_locations: provider: qtpyvcp.plugins.file_locations:FileLocations log_level: debug kwargs: default_location: NC Files local_locations: Home: ~/ Desktop: ~/Desktop NC Files: ~/linuxcnc/nc_files network_locations: null exportedhal: provider: qtpyvcp.plugins.exported_hal:ExportedHal virtual_input: provider: qtpyvcp.plugins.virtual_input_manager:VirtualInputManager gcode_properties: provider: qtpyvcp.plugins.gcode_properties:GCodeProperties dialogs: open_file: provider: qtpyvcp.widgets.dialogs.open_file_dialog:OpenFileDialog set_work_offsets: provider: qtpyvcp.widgets.dialogs.offsets_dialog:OffsetsDialog tool_edit: provider: qtpyvcp.widgets.dialogs.tool_edit_dialog:ToolEditDialog probe_sim: provider: qtpyvcp.widgets.dialogs.probesim_dialog:ProbeSim about_qtpyvcp: provider: qtpyvcp.widgets.dialogs.about_dialog:AboutDialog toolchange: provider: qtpyvcp.widgets.dialogs.toolchange_dialog:ToolChangeDialog kwargs: ui_file: /usr/lib/python3/dist-packages/probe_basic/toolchange_dialog_pb.ui shutdown: provider: qtpyvcp.widgets.dialogs.shutdown_dialog:ShutDownDialog about_probebasic: provider: qtpyvcp.widgets.dialogs.about_dialog:AboutDialog kwargs: ui_file: /usr/lib/python3/dist-packages/probe_basic/about.ui virtual_input_providers: number: provider: qtpyvcp.widgets.virtual_input.virtual_input:VirtualInput kwargs: ui_file: /usr/lib/python3/dist-packages/qtpyvcp/yaml_lib/../widgets/virtual_input/numpad.ui text: provider: qtpyvcp.widgets.virtual_input.virtual_input:VirtualInput kwargs: ui_file: /usr/lib/python3/dist-packages/qtpyvcp/yaml_lib/../widgets/virtual_input/keyboard.ui application: provider: qtpyvcp.app.application:VCPApplication kwargs: stylesheet: /usr/lib/python3/dist-packages/probe_basic/probe_basic.qss custom_fonts: /usr/lib/python3/dist-packages/probe_basic/fonts settings: touch-probe.diameter-offset: default_value: 0.123123 persistent: true min_value: 0 max_value: 1 dro.display-units: default_value: 0 options: - Auto - Inch - Metric dro.lathe-radius-mode: default_value: 0 options: - Auto - Radius - Diameter dro.inch-format: default_value: '%9.4f' value_type: str dro.millimeter-format: default_value: '%9.3f' value_type: str dro.degree-format: default_value: '%9.2f' offset_table.min_range: default_value: -1000 offset_table.max_range: default_value: 1000 backplot.show-grid: default_value: false backplot.show-program-bounds: default_value: false backplot.show-machine-bounds: default_value: false backplot.show-machine-labels: default_value: false backplot.show-machine-ticks: default_value: false backplot.perspective-view: default_value: false backplot.view: default_value: 4 options: - 'X: Front View' - 'Y: Front View' - 'Z: Top View' - 'Z2: Bottom View' - 'P: Isometric' backplot.machine-ext-scale: default_value: 0.65 backplot.multitool-colors: default_value: true probe-parameters.calibration-offset: description: Probe trigger point offset. default_value: 0.0 persistent: true min_value: 0 max_value: 1000 probe-parameters.cal-diameter: description: Probe calibration diameter. default_value: 0.0 persistent: true min_value: 0 max_value: 1000 probe-parameters.x-cal-width: description: Probe calibration x width. default_value: 0.0 persistent: true min_value: 0 max_value: 1000 probe-parameters.y-cal-width: description: Probe calibration y width. default_value: 0.0 persistent: true min_value: 0 max_value: 1000 probe-parameters.probe-parameters.sq-cal-axis: description: Probe calibrate square axis. default_value: 0.0 persistent: true min_value: 0 max_value: 2 probe-parameters.probe-tool-number: description: probe tool number. default_value: 0.0 persistent: true min_value: 0 max_value: 9999 probe-parameters.step-off-width: description: probe step off width. default_value: 0.0 persistent: true min_value: 0 max_value: 10000 probe-parameters.probe-fast-fr: description: probe fast feedrate. default_value: 0.0 persistent: true min_value: 0 max_value: 10000 probe-parameters.probe-slow-fr: description: probe slow feedrate. default_value: 0.0 persistent: true min_value: 0 max_value: 10000 probe-parameters.probe-traverse-fr: description: probe traverse feedrate. default_value: 0.0 persistent: true min_value: 0 max_value: 100000 probe-parameters.max-xy-distance: description: max x and y probe travel distance. default_value: 0.0 persistent: true min_value: 0 max_value: 10000 probe-parameters.xy-clearance: description: x and y clearance distance. default_value: 0.0 persistent: true min_value: 0 max_value: 10000 probe-parameters.max-z-distance: description: max z probe travel distance. default_value: 0.0 persistent: true min_value: 0 max_value: 10000 probe-parameters.z-clearance: description: z clearance distance. default_value: 0.0 persistent: true min_value: 0 max_value: 10000 probe-parameters.extra-probe-depth: description: extra probe depth. default_value: 0.0 persistent: true min_value: -10000 max_value: 10000 probe-parameters.edge-width: description: edge width probing distance. default_value: 0.0 persistent: true min_value: 0 max_value: 10000 probe-parameters.diameter-hint: description: boss and pocket diameter hint. default_value: 0.0 persistent: true min_value: 0 max_value: 10000 probe-parameters.x-hint-boss-pocket: description: boss and pocket x hint. default_value: 0.0 persistent: true min_value: 0 max_value: 10000 probe-parameters.y-hint-boss-pocket: description: boss and pocket y hint. default_value: 0.0 persistent: true min_value: 0 max_value: 10000 probe-parameters.x-hint-ridge-valley: description: ridge and valley x hint. default_value: 0.0 persistent: true min_value: 0 max_value: 10000 probe-parameters.y-hint-ridge-valley: description: ridge and valley y hint. default_value: 0.0 persistent: true min_value: 0 max_value: 10000 probe-parameters.probe-posn-btn: description: probe pos'n mode button. persistent: true probe-parameters.rotation-wco-btn: description: set wco rotation mode. persistent: true probe-parameters.cal-xy-btn: description: calibrate probe with x and y error. persistent: true probe-parameters.cal-x-btn: description: calibrate probe on x error only. persistent: true probe-parameters.cal-y-btn: description: calibrate probe on y error only. persistent: true spindle-rpm-display.calculated-rpm: description: display calculated rpm on main page. persistent: true spindle-rpm-display.encoder-feedback-rpm: description: display encoder feedback rpm on main page. persistent: true tool-change-position.x-tool-change-position: description: x axis tool change position. default_value: 0.0 persistent: true min_value: -10000 max_value: 10000 tool-change-position.y-tool-change-position: description: y axis tool change position. default_value: 0.0 persistent: true min_value: -10000 max_value: 10000 tool-change-position.z-tool-change-position: description: z axis tool change position. default_value: 0.0 persistent: true min_value: -10000 max_value: 10000 tool-setter-probe.fast-probe-fr: description: tool probe fast feedrate. default_value: 0.0 persistent: true min_value: -10000 max_value: 10000 tool-setter-probe.slow-probe-fr: description: tool probe slow feedrate. default_value: 0.0 persistent: true min_value: -10000 max_value: 10000 tool-setter-probe.traverse-fr: description: tool probe traverse feedrate. default_value: 0.0 persistent: true min_value: -10000 max_value: 10000 tool-setter-probe.z-max-travel: description: maximumm z travel while probing before erroring out. default_value: 0.0 persistent: true min_value: -10000 max_value: 10000 tool-setter-probe.xy-max-travel: description: maximumm xy travel while probing before erroring out. default_value: 0.0 persistent: true min_value: -10000 max_value: 10000 tool-setter-probe.retract-distance: description: distance tool retracts after fast probe move. default_value: 0.0 persistent: true min_value: -10000 max_value: 10000 tool-setter-probe.spindle-nose-height: description: distance from home to tool setter for the spindle nose. default_value: 0.0 persistent: true min_value: -10000 max_value: 10000 tool-setter-probe.diameter-offset: description: probes tool offset by diameter. persistent: true tool-setter-probe.tool-diam-offset-setting: description: activation setting for probing using tool diameter offset. default_value: 0.0 persistent: true min_value: 0 max_value: 1 tool-setter-probe.diameter-probe: description: probes tool diameter. persistent: true tool-setter-probe.tool-diam-probing: description: activation setting for probing using tool diameter probing. default_value: 0.0 persistent: true min_value: 0 max_value: 1 tool-setter-probe.setter-offset-direction-left: description: probe tool diameter to offset direction left. persistent: true tool-setter-probe.setter-offset-direction-right: description: probe tool diameter to offset direction right. persistent: true tool-setter-probe.setter-offset-direction-front: description: probe tool diameter to offset direction front. persistent: true tool-setter-probe.setter-offset-direction-back: description: probe tool diameter to offset direction back. persistent: true programmable-coolant.activation: description: activation setting for programmable coolant. default_value: 0.0 persistent: true min_value: 0 max_value: 1 programmable-coolant.horizontal-distance: description: horizontal distance setting for programmable coolant. default_value: 0.0 persistent: true min_value: -10000 max_value: 10000 programmable-coolant.vertical-distance: description: vertical distance setting for programmable coolant. default_value: 0.0 persistent: true min_value: -10000 max_value: 10000 programmable-coolant.nozzle-offset: description: nozzle offset setting for programmable coolant. default_value: 0.0 persistent: true min_value: -10000 max_value: 10000 backplot.show-program-labels: default_value: false backplot.show-program-ticks: default_value: false menubar: *id001 qtdesigner: ui_file: /usr/lib/python3/dist-packages/probe_basic/probe_basic.ui qss_file: /usr/lib/python3/dist-packages/probe_basic/probe_basic.qss (config_loader.py:53) [qtpyvcp.utilities.info][INFO] The machine has 3 axes and 3 joints (info.py:414) [qtpyvcp.utilities.info][INFO] The Axis/Joint mapping is: (info.py:415) [qtpyvcp.utilities.info][INFO] Axis X --> Joint 0 (info.py:423) [qtpyvcp.utilities.info][INFO] Axis Y --> Joint 1 (info.py:423) [qtpyvcp.utilities.info][INFO] Axis Z --> Joint 2 (info.py:423) [qtpyvcp.app.launcher][DEBUG] Time: 0.000 (+0.000) - in script (launcher.py:52) [qtpyvcp.app.launcher][DEBUG] Loading data plugings (launcher.py:65) [qtpyvcp.plugins][DEBUG] Loading plugin 'status' from 'qtpyvcp.plugins.status:Status' (__init__.py:66) [qtpyvcp.app.runtime_config][ERROR] "" for option [DEFAULT] recentfiles is not a valid list, using default value of "[]" (runtime_config.py:91) [qtpyvcp.plugins.status][DEBUG] ---------set mdi_history: None, [] (status.py:192) [qtpyvcp.plugins][DEBUG] Loading plugin 'persistent_data_manager' from 'qtpyvcp.plugins.persistent_data_manager:PersistentDataManager' (__init__.py:66) [qtpyvcp.plugins][DEBUG] Loading plugin 'settings' from 'qtpyvcp.plugins.settings:Settings' (__init__.py:66) [qtpyvcp.plugins][DEBUG] Loading plugin 'position' from 'qtpyvcp.plugins.positions:Position' (__init__.py:66) [qtpyvcp.plugins][DEBUG] Loading plugin 'tooltable' from 'qtpyvcp.plugins.tool_table:ToolTable' (__init__.py:66) [qtpyvcp.plugins][DEBUG] Loading plugin 'offsettable' from 'qtpyvcp.plugins.offset_table:OffsetTable' (__init__.py:66) [qtpyvcp.plugins][DEBUG] Loading plugin 'notifications' from 'qtpyvcp.plugins.notifications:Notifications' (__init__.py:66) [qtpyvcp.plugins][DEBUG] Loading plugin 'file_locations' from 'qtpyvcp.plugins.file_locations:FileLocations' (__init__.py:66) [qtpyvcp.plugins][DEBUG] Loading plugin 'exportedhal' from 'qtpyvcp.plugins.exported_hal:ExportedHal' (__init__.py:66) [qtpyvcp.plugins][DEBUG] Loading plugin 'virtual_input' from 'qtpyvcp.plugins.virtual_input_manager:VirtualInputManager' (__init__.py:66) [qtpyvcp.plugins][DEBUG] Loading plugin 'gcode_properties' from 'qtpyvcp.plugins.gcode_properties:GCodeProperties' (__init__.py:66) [qtpyvcp.app.launcher][DEBUG] Time: 0.678 (+0.678) - done loading data plugins (launcher.py:52) [qtpyvcp.app.launcher][DEBUG] Initializing app (launcher.py:69) [qtpyvcp.plugins][DEBUG] Initializing 'status' plugin (__init__.py:116) [qtpyvcp.plugins.status][DEBUG] Starting periodic updates with 75ms cycle time (status.py:742) [qtpyvcp.plugins][DEBUG] Initializing 'persistent_data_manager' plugin (__init__.py:116) [qtpyvcp.plugins][DEBUG] Initializing 'settings' plugin (__init__.py:116) [qtpyvcp.plugins][DEBUG] Initializing 'position' plugin (__init__.py:116) [qtpyvcp.plugins][DEBUG] Initializing 'tooltable' plugin (__init__.py:116) [qtpyvcp.plugins][DEBUG] Initializing 'offsettable' plugin (__init__.py:116) [qtpyvcp.plugins][DEBUG] Initializing 'notifications' plugin (__init__.py:116) [qtpyvcp.plugins][DEBUG] Initializing 'file_locations' plugin (__init__.py:116) [qtpyvcp.plugins][DEBUG] Initializing 'exportedhal' plugin (__init__.py:116) [qtpyvcp.plugins.exported_hal][DEBUG] Initalizing framework exposed HAL pins (exported_hal.py:40) [qtpyvcp.hal.hal_qlib][DEBUG] Adding HAL pin: qtpyvcp.feed-override.reset ( in) (hal_qlib.py:143) [qtpyvcp.hal.hal_qlib][DEBUG] Adding HAL pin: qtpyvcp.rapid-override.reset ( in) (hal_qlib.py:143) [qtpyvcp.hal.hal_qlib][DEBUG] Adding HAL pin: qtpyvcp.spindle-override.reset ( in) (hal_qlib.py:143) [qtpyvcp.plugins][DEBUG] Initializing 'virtual_input' plugin (__init__.py:116) [qtpyvcp.plugins][DEBUG] Initializing 'gcode_properties' plugin (__init__.py:116) [qtpyvcp][INFO] Loading global stylesheet: /usr/lib/python3/dist-packages/probe_basic/probe_basic.qss (application.py:186) [qtpyvcp][DEBUG] Loading custom font: /usr/lib/python3/dist-packages/probe_basic/fonts/BebasKai.ttf (application.py:210) [qtpyvcp.app.launcher][DEBUG] Time: 0.781 (+0.104) - done initializing app (launcher.py:52) [qtpyvcp.app.launcher][DEBUG] Loading dialogs (launcher.py:73) [qtpyvcp.hal][INFO] Creating new HAL component: qtpyvcp_manualtoolchange (__init__.py:61) [qtpyvcp.hal.hal_qlib][DEBUG] Adding HAL pin: qtpyvcp_manualtoolchange.number ( in) (hal_qlib.py:143) [qtpyvcp.hal.hal_qlib][DEBUG] Adding HAL pin: qtpyvcp_manualtoolchange.change ( in) (hal_qlib.py:143) [qtpyvcp.hal.hal_qlib][DEBUG] Adding HAL pin: qtpyvcp_manualtoolchange.changed ( out) (hal_qlib.py:143) [qtpyvcp.hal.hal_qlib][DEBUG] Adding HAL pin: qtpyvcp_manualtoolchange.change_button ( in) (hal_qlib.py:143) [qtpyvcp.app.launcher][DEBUG] Time: 1.021 (+0.240) - done loading dialogs (launcher.py:52) [qtpyvcp.app.launcher][DEBUG] Loading windows (launcher.py:77) [qtpyvcp.widgets.display_widgets.vtk_backplot.vtk_backplot][DEBUG] @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ (vtk_backplot.py:184) [qtpyvcp.widgets.display_widgets.vtk_backplot.vtk_backplot][DEBUG] @@@@@@@@@@ VTKBackPlot __init__ @@@@@@@@@ (vtk_backplot.py:185) [qtpyvcp.widgets.display_widgets.vtk_backplot.vtk_backplot][DEBUG] @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ (vtk_backplot.py:186) [qtpyvcp.widgets.display_widgets.vtk_backplot.vtk_backplot][DEBUG] ---------active_wcs_index 0 (vtk_backplot.py:271) [qtpyvcp.widgets.display_widgets.vtk_backplot.vtk_backplot][DEBUG] ---------active_wcs_offset (0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0) (vtk_backplot.py:272) [qtpyvcp.widgets.display_widgets.vtk_backplot.vtk_backplot][DEBUG] ---------wcs_offsets {0: [0.0, 0.0, 0.0, 0.0], 1: [0.0, 0.0, 0.0, 0.0], 2: [0.0, 0.0, 0.0, 0.0], 3: [0.0, 0.0, 0.0, 0.0], 4: [0.0, 0.0, 0.0, 0.0], 5: [0.0, 0.0, 0.0, 0.0], 6: [0.0, 0.0, 0.0, 0.0], 7: [0.0, 0.0, 0.0, 0.0], 8: [0.0, 0.0, 0.0, 0.0]} (vtk_backplot.py:273) [qtpyvcp.widgets.display_widgets.vtk_backplot.vtk_backplot][DEBUG] ---------translate: (0.0, 0.0, 0.0) (vtk_backplot.py:357) [qtpyvcp.widgets.display_widgets.vtk_backplot.vtk_backplot][DEBUG] ---------active_wcs_offset: (0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0) (vtk_backplot.py:358) [qtpyvcp.widgets.display_widgets.vtk_backplot.vtk_backplot][DEBUG] show grid (vtk_backplot.py:2032) [qtpyvcp.widgets.display_widgets.vtk_backplot.vtk_backplot][DEBUG] Setting view to: P (vtk_backplot.py:1560) [qtpyvcp.widgets.display_widgets.vtk_backplot.vtk_canon][DEBUG] VTKCanon --- Init --- (vtk_canon.py:32) [qtpyvcp.widgets.display_widgets.vtk_backplot.vtk_canon][DEBUG] G5x offsets = (0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0) (vtk_canon.py:51) [qtpyvcp.widgets.display_widgets.vtk_backplot.vtk_canon][DEBUG] XY Rotation = 0.0 (vtk_canon.py:52) [qtpyvcp.widgets.display_widgets.vtk_backplot.vtk_canon][DEBUG] VTKCanon --- Init Done --- (vtk_canon.py:58) [qtpyvcp.widgets.display_widgets.vtk_backplot.vtk_backplot][DEBUG] Setting view to: P (vtk_backplot.py:1560) [qtpyvcp.widgets.display_widgets.vtk_backplot.vtk_backplot][DEBUG] @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ (vtk_backplot.py:536) [qtpyvcp.widgets.display_widgets.vtk_backplot.vtk_backplot][DEBUG] @@@@@@@@@@ __init__ END @@@@@@@@@ (vtk_backplot.py:537) [qtpyvcp.widgets.display_widgets.vtk_backplot.vtk_backplot][DEBUG] @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ (vtk_backplot.py:538) [qtpyvcp.widgets.display_widgets.vtk_backplot.vtk_backplot][DEBUG] -----setViewMachine (vtk_backplot.py:1810) [qtpyvcp.widgets.display_widgets.vtk_backplot.vtk_backplot][DEBUG] -----machine_bounds: (-0.01, 1600.0, -845.0, 0.0, -400.0, 0.01) (vtk_backplot.py:1812) [qtpyvcp.widgets.display_widgets.vtk_backplot.vtk_backplot][DEBUG] -----machine_center: (799.995, -422.5, -199.995) (vtk_backplot.py:1820) [qtpyvcp.widgets.display_widgets.vtk_backplot.vtk_backplot][DEBUG] -----x_dist: 1600.01 (vtk_backplot.py:1836) [qtpyvcp.widgets.display_widgets.vtk_backplot.vtk_backplot][DEBUG] -----y_dist: 845.0 (vtk_backplot.py:1837) [qtpyvcp.widgets.display_widgets.vtk_backplot.vtk_backplot][DEBUG] -----z_dist: 400.01 (vtk_backplot.py:1838) [qtpyvcp.plugins][DEBUG] Post GUI Initializing 'status' plugin (__init__.py:128) [qtpyvcp.plugins][DEBUG] Post GUI Initializing 'persistent_data_manager' plugin (__init__.py:128) [qtpyvcp.plugins][DEBUG] Post GUI Initializing 'settings' plugin (__init__.py:128) [qtpyvcp.plugins][DEBUG] Post GUI Initializing 'position' plugin (__init__.py:128) [qtpyvcp.plugins][DEBUG] Post GUI Initializing 'tooltable' plugin (__init__.py:128) [qtpyvcp.plugins][DEBUG] Post GUI Initializing 'offsettable' plugin (__init__.py:128) [qtpyvcp.plugins][DEBUG] Post GUI Initializing 'notifications' plugin (__init__.py:128) [qtpyvcp.plugins][DEBUG] Post GUI Initializing 'file_locations' plugin (__init__.py:128) [qtpyvcp.plugins][DEBUG] Post GUI Initializing 'exportedhal' plugin (__init__.py:128) [qtpyvcp.plugins][DEBUG] Post GUI Initializing 'virtual_input' plugin (__init__.py:128) [qtpyvcp.plugins][DEBUG] Post GUI Initializing 'gcode_properties' plugin (__init__.py:128) [qtpyvcp.app.launcher][DEBUG] Time: 3.384 (+2.363) - done loading windows (launcher.py:52) [qtpyvcp.app.launcher][DEBUG] Initializing widgets (launcher.py:81) [qtpyvcp.hal][DEBUG] Using existing HAL component: qtpyvcp (__init__.py:59) [qtpyvcp.hal.hal_qlib][DEBUG] Adding HAL pin: qtpyvcp.timerminutes.enable ( in) (hal_qlib.py:143) [qtpyvcp.hal.hal_qlib][DEBUG] Adding HAL pin: qtpyvcp.timerminutes.in ( in) (hal_qlib.py:143) [qtpyvcp.hal][DEBUG] Using existing HAL component: qtpyvcp (__init__.py:59) [qtpyvcp.hal.hal_qlib][DEBUG] Adding HAL pin: qtpyvcp.spindle-encoder-rpm.enable ( in) (hal_qlib.py:143) [qtpyvcp.hal.hal_qlib][DEBUG] Adding HAL pin: qtpyvcp.spindle-encoder-rpm.in ( in) (hal_qlib.py:143) [qtpyvcp.hal][DEBUG] Using existing HAL component: qtpyvcp (__init__.py:59) [qtpyvcp.hal.hal_qlib][DEBUG] Adding HAL pin: qtpyvcp.probe-led.on ( in) (hal_qlib.py:143) [qtpyvcp.hal.hal_qlib][DEBUG] Adding HAL pin: qtpyvcp.probe-led.flash ( in) (hal_qlib.py:143) [qtpyvcp.hal.hal_qlib][DEBUG] Adding HAL pin: qtpyvcp.probe-led.flash-rate ( in) (hal_qlib.py:143) [qtpyvcp.hal][DEBUG] Using existing HAL component: qtpyvcp (__init__.py:59) [qtpyvcp.hal.hal_qlib][DEBUG] Adding HAL pin: qtpyvcp.timerhours.enable ( in) (hal_qlib.py:143) [qtpyvcp.hal.hal_qlib][DEBUG] Adding HAL pin: qtpyvcp.timerhours.in ( in) (hal_qlib.py:143) [qtpyvcp.hal][DEBUG] Using existing HAL component: qtpyvcp (__init__.py:59) [qtpyvcp.hal.hal_qlib][DEBUG] Adding HAL pin: qtpyvcp.timerseconds.enable ( in) (hal_qlib.py:143) [qtpyvcp.hal.hal_qlib][DEBUG] Adding HAL pin: qtpyvcp.timerseconds.in ( in) (hal_qlib.py:143) [qtpyvcp.hal][DEBUG] Using existing HAL component: qtpyvcp (__init__.py:59) [qtpyvcp.hal.hal_qlib][DEBUG] Adding HAL pin: qtpyvcp.spindle-load-indicator.in-f ( in) (hal_qlib.py:143) [qtpyvcp.hal.hal_qlib][DEBUG] Adding HAL pin: qtpyvcp.spindle-load-indicator.in-i ( in) (hal_qlib.py:143) [qtpyvcp.hal.hal_qlib][DEBUG] Adding HAL pin: qtpyvcp.spindle-load-indicator.min-val ( in) (hal_qlib.py:143) [qtpyvcp.hal.hal_qlib][DEBUG] Adding HAL pin: qtpyvcp.spindle-load-indicator.max-val ( in) (hal_qlib.py:143) [qtpyvcp.hal][DEBUG] Using existing HAL component: qtpyvcp (__init__.py:59) [qtpyvcp.hal.hal_qlib][DEBUG] Adding HAL pin: qtpyvcp.probe-in.enable ( in) (hal_qlib.py:143) [qtpyvcp.hal.hal_qlib][DEBUG] Adding HAL pin: qtpyvcp.probe-in.out ( out) (hal_qlib.py:143) [qtpyvcp.hal.hal_qlib][DEBUG] Adding HAL pin: qtpyvcp.probe-in.io ( io) (hal_qlib.py:143) [qtpyvcp.app.launcher][DEBUG] Time: 3.411 (+0.026) - done initializing widgets (launcher.py:52) [qtpyvcp.app.launcher][INFO] Loading POSTGUI_HALFILE: /home/cnc/linuxcnc/configs/Black_Phanter/postgui.hal (launcher.py:98) not: already exists /home/cnc/linuxcnc/configs/Black_Phanter/postgui.hal:5: waitpid failed /usr/bin/rtapi_app not /home/cnc/linuxcnc/configs/Black_Phanter/postgui.hal:5: /usr/bin/rtapi_app exited without becoming ready /home/cnc/linuxcnc/configs/Black_Phanter/postgui.hal:5: insmod for not failed, returned -1 Failed to load POSTGUI_HALFILE with error: 1 35638 35692 Stopping realtime threads Unloading hal components Note: Using POSIX realtime ----------------------------------------------------------------------- Info report created by linuxcnc_info: The file: /tmp/linuxcnc_info.txt can be posted to a forum or a web site like: http://pastebin.com in order to provide information about the linuxcnc system and configuration. Date: Mo 16. Dez 21:02:35 CET 2024 UTC Date: Mo 16. Dez 20:02:35 UTC 2024 this program: /usr/bin/linuxcnc_info uptime: 21:02:35 up 4 days, 9:50, 1 user, load average: 1,19, 1,29, 1,76 lsb_release -sa: Debian Debian GNU/Linux 12 (bookworm) 12 bookworm linuxcnc: /usr/bin/linuxcnc pwd: /home/cnc/linuxcnc/configs/Black_Phanter USER: cnc LOGNAME: cnc HOME: /home/cnc EDITOR: VISUAL: LANGUAGE: TERM: dumb COLORTERM: DISPLAY: :0.0 DESKTOP: lightdm-xsession display size: 1920x1080 pixels (508x285 millimeters) PATH: /usr/bin:/home/cnc/linuxcnc/configs/Black_Phanter/bin:/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games uname items: nodename -n: cnc kernel-name -s: Linux kernel-vers -v: #1 SMP PREEMPT_RT Debian 6.1.119-1 (2024-11-22) machine -m: x86_64 processor -p: unknown platform -i: unknown oper system -o: GNU/Linux /proc items: cmdline: BOOT_IMAGE=/boot/vmlinuz-6.1.0-28-rt-amd64 root=UUID=8b2437cf-bfea-4f45-8e5f-3fa19a677e1a ro initrd=/install/gtk/initrd.gz quiet irqaffinity=0 isolcpus=0,1 model name: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz cores: 4 cpu MHz: 3392.450 parport: serial: Versions: gcc: gcc (Debian 12.2.0-14) 12.2.0 python: Python 3.11.2 git: not_in_PATH git commit: NA tcl: 8.6 tk: 8.6 glade: not_in_PATH linuxcnc_var all: LINUXCNCVERSION: 2.9.3 LINUXCNC_AUX_GLADEVCP: /usr/share/linuxcnc/aux_gladevcp LINUXCNC_AUX_EXAMPLES: /usr/share/linuxcnc/aux_examples REALTIME: /usr/lib/linuxcnc/realtime RTS: uspace HALLIB_DIR: /usr/share/linuxcnc/hallib PYTHON: /usr/bin/python3 dpkg -l '*linuxcnc*': Gewünscht=Unbekannt/Installieren/R=Entfernen/P=Vollständig Löschen/Halten | Status=Nicht/Installiert/Config/U=Entpackt/halb konFiguriert/ Halb installiert/Trigger erWartet/Trigger anhängig |/ Fehler?=(kein)/R=Neuinstallation notwendig (Status, Fehler: GROSS=schlecht) ||/ Name Version Architektur Beschreibung +++-===================-============-============-===================================================================== un linuxcnc (keine Beschreibung vorhanden) un linuxcnc-dev (keine Beschreibung vorhanden) un linuxcnc-doc (keine Beschreibung vorhanden) ii linuxcnc-doc-de 1:2.9.3 all motion controller for CNC machines and robots (German documentation) ii linuxcnc-doc-en 1:2.9.3 all motion controller for CNC machines and robots (English documentation) ii linuxcnc-doc-es 1:2.9.3 all motion controller for CNC machines and robots (Spanish documentation) ii linuxcnc-doc-fr 1:2.9.3 all motion controller for CNC machines and robots (French documentation) un linuxcnc-sim (keine Beschreibung vorhanden) un linuxcnc-sim-dev (keine Beschreibung vorhanden) ii linuxcnc-uspace 1:2.9.3 amd64 motion controller for CNC machines and robots ii linuxcnc-uspace-dev 1:2.9.3 amd64 PC based motion controller for real-time Linux