ethercat slaves -v
=== Master 0, Slave 0 ===
Device: Main
State: OP
Flag: +
Identity:
  Vendor Id:       0x00000002
  Product code:    0x044c2c52
  Revision number: 0x00120000
  Serial number:   0x00000000
DL information:
  FMMU bit operation: no
  Distributed clocks: yes, 64 bit
  DC system time transmission delay: 0 ns
Port  Type  Link  Loop    Signal  NextSlave  RxTime [ns]  Diff [ns]   NextDc [ns]
   0* MII   up    open    yes             -   3352775498           0           0
   1  EBUS  up    open    yes             1   3352775808         310         155
   2  MII   down  closed  no              -            -           -           -
   3  N/A   down  closed  no              -            -           -           -
General:
  Group: SystemBk
  Image name: 
  Order number: EK1100
  Device name: EK1100 EtherCAT-Koppler (2A E-Bus)
  Flags:
    Enable SafeOp: no
    Enable notLRW: no
  Current consumption: -2000 mA
=== Master 0, Slave 1 ===
Device: Main
State: PREOP
Flag: E
Identity:
  Vendor Id:       0x00000002
  Product code:    0x1a5f3052
  Revision number: 0x00110000
  Serial number:   0x00000000
DL information:
  FMMU bit operation: no
  Distributed clocks: yes, 64 bit
  DC system time transmission delay: 155 ns
Port  Type  Link  Loop    Signal  NextSlave  RxTime [ns]  Diff [ns]   NextDc [ns]
   0* EBUS  up    open    yes             0   3412709799           0         155
   1  EBUS  down  closed  no              -            -           -           -
   2  N/A   down  closed  no              -            -           -           -
   3  N/A   down  closed  no              -            -           -           -
Mailboxes:
  Bootstrap RX: 0x1000/532, TX: 0x1800/532
  Standard  RX: 0x1800/558, TX: 0x1a2e/558
  Supported protocols: AoE, CoE, FoE
General:
  Group: Communication
  Image name: 
  Order number: EL6751
  Device name: EL6751 CANopen Master
  CoE details:
    Enable SDO: yes
    Enable SDO Info: yes
    Enable PDO Assign: no
    Enable PDO Configuration: no
    Enable Upload at startup: no
    Enable SDO complete access: yes
  Flags:
    Enable SafeOp: no
    Enable notLRW: no
  Current consumption: 300 mA