[ 0.000000] Linux version 4.9.0-12-rt-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP PREEMPT RT Debian 4.9.210-1 (2020-01-20) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-12-rt-amd64 root=UUID=20f64e7b-d457-429e-81c0-09c1d09a9c3a ro quiet isolcpus=2,3 intel_idle.max_cstate=1 processor.max_cstate=1 idle=poll usbcore.autosuspend=-1 mitigations=off nowatchdog nomce [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d2181fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d2182000-0x00000000d2188fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000d2189000-0x00000000d25befff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d25bf000-0x00000000d2a56fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d2a57000-0x00000000d7eeafff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d7eeb000-0x00000000d7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d8000000-0x00000000d875ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d8760000-0x00000000d87fffff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000d8800000-0x00000000d8fadfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d8fae000-0x00000000d8ffffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000d9000000-0x00000000da71cfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000da71d000-0x00000000da7fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000da800000-0x00000000dbe10fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dbe11000-0x00000000dbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021edfffff] usable [ 0.000000] process: using polling idle threads [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by American Megatrends [ 0.000000] efi: ACPI=0xd8fee000 ACPI 2.0=0xd8fee000 SMBIOS=0xf04c0 MPS=0xfd680 [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Dell Inc. OptiPlex 9020/0KC9NP, BIOS A25 05/30/2019 [ 0.000000] Kernel/User page tables isolation: disabled [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x21ee00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D7FFF write-protect [ 0.000000] D8000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7E00000000 write-back [ 0.000000] 1 base 0200000000 mask 7FE0000000 write-back [ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable [ 0.000000] 3 base 00DE000000 mask 7FFE000000 uncachable [ 0.000000] 4 base 00DD000000 mask 7FFF000000 uncachable [ 0.000000] 5 base 021F000000 mask 7FFF000000 uncachable [ 0.000000] 6 base 021EE00000 mask 7FFFE00000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdbe11 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd8c0-0x000fd8cf] mapped at [ffff8fe9800fd8c0] [ 0.000000] Base memory trampoline at [ffff8fe980097000] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x1fd1a6000, 0x1fd1a6fff] PGTABLE [ 0.000000] BRK [0x1fd1a7000, 0x1fd1a7fff] PGTABLE [ 0.000000] BRK [0x1fd1a8000, 0x1fd1a8fff] PGTABLE [ 0.000000] BRK [0x1fd1a9000, 0x1fd1a9fff] PGTABLE [ 0.000000] BRK [0x1fd1aa000, 0x1fd1aafff] PGTABLE [ 0.000000] BRK [0x1fd1ab000, 0x1fd1abfff] PGTABLE [ 0.000000] BRK [0x1fd1ac000, 0x1fd1acfff] PGTABLE [ 0.000000] BRK [0x1fd1ad000, 0x1fd1adfff] PGTABLE [ 0.000000] BRK [0x1fd1ae000, 0x1fd1aefff] PGTABLE [ 0.000000] BRK [0x1fd1af000, 0x1fd1affff] PGTABLE [ 0.000000] BRK [0x1fd1b0000, 0x1fd1b0fff] PGTABLE [ 0.000000] BRK [0x1fd1b1000, 0x1fd1b1fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x35201000-0x368f7fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000D8FEE000 000024 (v02 DELL ) [ 0.000000] ACPI: XSDT 0x00000000D8FEE088 00008C (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000D8FF9B20 00010C (v05 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000D8FEE1A0 00B97E (v02 DELL CBX3 00000014 INTL 20091112) [ 0.000000] ACPI: FACS 0x00000000DA7FE080 000040 [ 0.000000] ACPI: APIC 0x00000000D8FF9C30 000072 (v03 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000D8FF9CA8 000044 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: SLIC 0x00000000D8FF9CF0 000176 (v03 DELL CBX3 01072009 MSFT 00010013) [ 0.000000] ACPI: LPIT 0x00000000D8FF9E68 00005C (v01 DELL CBX3 00000000 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000D8FF9EC8 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711) [ 0.000000] ACPI: HPET 0x00000000D8FFA9A0 000038 (v01 DELL CBX3 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000D8FFA9D8 00036D (v01 SataRe SataTabl 00001000 INTL 20120711) [ 0.000000] ACPI: MCFG 0x00000000D8FFAD48 00003C (v01 DELL CBX3 01072009 MSFT 00000097) [ 0.000000] ACPI: SSDT 0x00000000D8FFAD88 0034D6 (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [ 0.000000] ACPI: ASF! 0x00000000D8FFE260 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: MSDM 0x00000000D8FFE308 000055 (v03 DELL CBX3 06222004 AMI 00010013) [ 0.000000] ACPI: BGRT 0x00000000D8FFE360 000038 (v00 \xfffffff3\xffffffee?d?? 01072009 AMI 00010013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021edfffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x21edf9000-0x21edfdfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000021edfffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000d2181fff] [ 0.000000] node 0: [mem 0x00000000d2189000-0x00000000d25befff] [ 0.000000] node 0: [mem 0x00000000d2a57000-0x00000000d7eeafff] [ 0.000000] node 0: [mem 0x00000000d8000000-0x00000000d875ffff] [ 0.000000] node 0: [mem 0x00000000d8800000-0x00000000d8fadfff] [ 0.000000] node 0: [mem 0x00000000d9000000-0x00000000da71cfff] [ 0.000000] node 0: [mem 0x00000000da800000-0x00000000dbe10fff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000021edfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021edfffff] [ 0.000000] On node 0 totalpages: 2073637 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 27 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13979 pages used for memmap [ 0.000000] DMA32 zone: 894600 pages, LIFO batch:31 [ 0.000000] Normal zone: 18360 pages used for memmap [ 0.000000] Normal zone: 1175040 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x00000000dd200000-0x00000000df1fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xd2182000-0xd2188fff] [ 0.000000] PM: Registered nosave memory: [mem 0xd25bf000-0xd2a56fff] [ 0.000000] PM: Registered nosave memory: [mem 0xd7eeb000-0xd7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xd8760000-0xd87fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xd8fae000-0xd8ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xda71d000-0xda7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdbe11000-0xdbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdc000000-0xdcffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdd000000-0xdf1fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 116 pages/cpu s437952 r8192 d28992 u524288 [ 0.000000] pcpu-alloc: s437952 r8192 d28992 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2041207 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-12-rt-amd64 root=UUID=20f64e7b-d457-429e-81c0-09c1d09a9c3a ro quiet isolcpus=2,3 intel_idle.max_cstate=1 processor.max_cstate=1 idle=poll usbcore.autosuspend=-1 mitigations=off nowatchdog nomce [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 7960444K/8294548K available (6423K kernel code, 1155K rwdata, 2916K rodata, 1684K init, 860K bss, 334104K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. [ 0.000000] RCU kthread priority: 1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS:33024 nr_irqs:456 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2993.168 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5986.33 BogoMIPS (lpj=11972672) [ 0.000003] pid_max: default: 32768 minimum: 301 [ 0.000010] ACPI: Core revision 20160831 [ 0.007543] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.008106] Security Framework initialized [ 0.008107] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.008111] AppArmor: AppArmor disabled by boot time parameter [ 0.008909] Dentry cache hash table entries: 1048576 (order: 12, 16777216 bytes) [ 0.010924] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.011425] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.011433] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.011643] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.011643] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.011649] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.011649] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.011651] Speculative Store Bypass: Vulnerable [ 0.015099] Freeing SMP alternatives memory: 24K [ 0.018874] ftrace: allocating 25297 entries in 99 pages [ 0.026712] smpboot: Max logical packages: 1 [ 0.026794] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.027157] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.066850] TSC deadline timer enabled [ 0.066852] smpboot: CPU0: Intel(R) Core(TM) i5-4590S CPU @ 3.00GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.066869] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.066885] ... version: 3 [ 0.066886] ... bit width: 48 [ 0.066886] ... generic registers: 8 [ 0.066887] ... value mask: 0000ffffffffffff [ 0.066887] ... max period: 00007fffffffffff [ 0.066887] ... fixed-purpose events: 3 [ 0.066888] ... event mask: 00000007000000ff [ 0.162892] x86: Booting SMP configuration: [ 0.162893] .... node #0, CPUs: #1 #2 #3 [ 0.245246] x86: Booted up 1 node, 4 CPUs [ 0.245248] smpboot: Total of 4 processors activated (23945.34 BogoMIPS) [ 0.248148] devtmpfs: initialized [ 0.248209] x86/mm: Memory block size: 128MB [ 0.251057] PM: Registering ACPI NVS region [mem 0xd2182000-0xd2188fff] (28672 bytes) [ 0.251058] PM: Registering ACPI NVS region [mem 0xda71d000-0xda7fffff] (929792 bytes) [ 0.251106] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.251119] futex hash table entries: 1024 (order: 5, 131072 bytes) [ 0.251160] pinctrl core: initialized pinctrl subsystem [ 0.251263] NET: Registered protocol family 16 [ 0.251919] cpuidle: using governor ladder [ 0.255919] cpuidle: using governor menu [ 0.255948] ACPI: bus type PCI registered [ 0.255949] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.256004] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.256005] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.256010] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override. [ 0.256090] PCI: Using configuration type 1 for base access [ 0.256095] dmi type 0xB1 record - unknown flag [ 0.256131] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 0.256866] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 0.256866] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.257003] ACPI: Added _OSI(Module Device) [ 0.257004] ACPI: Added _OSI(Processor Device) [ 0.257005] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.257005] ACPI: Added _OSI(Processor Aggregator Device) [ 0.257160] ACPI: Executed 1 blocks of module-level executable AML code [ 0.259545] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.260603] ACPI: Interpreter enabled [ 0.260625] ACPI: (supports S0 S4 S5) [ 0.260626] ACPI: Using IOAPIC for interrupt routing [ 0.260647] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.268882] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.268885] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.269323] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.269657] PCI host bridge to bus 0000:00 [ 0.269658] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.269661] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.269662] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.269662] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.269663] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.269664] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window] [ 0.269665] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.269671] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000 [ 0.269753] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000 [ 0.269760] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit] [ 0.269765] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.269768] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.269835] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 0.269840] pci 0000:00:03.0: reg 0x10: [mem 0xf7c30000-0xf7c33fff 64bit] [ 0.269933] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.269949] pci 0000:00:14.0: reg 0x10: [mem 0xf7c20000-0xf7c2ffff 64bit] [ 0.270003] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.270036] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.270072] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.270087] pci 0000:00:16.0: reg 0x10: [mem 0xf7c3c000-0xf7c3c00f 64bit] [ 0.270144] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.270209] pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002 [ 0.270220] pci 0000:00:16.3: reg 0x10: [io 0xf0e0-0xf0e7] [ 0.270225] pci 0000:00:16.3: reg 0x14: [mem 0xf7c3a000-0xf7c3afff] [ 0.270333] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000 [ 0.270346] pci 0000:00:19.0: reg 0x10: [mem 0xf7c00000-0xf7c1ffff] [ 0.270353] pci 0000:00:19.0: reg 0x14: [mem 0xf7c39000-0xf7c39fff] [ 0.270360] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f] [ 0.270411] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.270444] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.270481] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.270496] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c38000-0xf7c383ff] [ 0.270572] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.270605] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.270643] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.270658] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c37000-0xf7c373ff] [ 0.270733] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.270768] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.270802] pci 0000:00:1f.0: [8086:8c4e] type 00 class 0x060100 [ 0.270953] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.270964] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7] [ 0.270971] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3] [ 0.270977] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7] [ 0.270984] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3] [ 0.270991] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.270997] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c36000-0xf7c367ff] [ 0.271029] pci 0000:00:1f.2: PME# supported from D3hot [ 0.271911] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.271936] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c35000-0xf7c350ff 64bit] [ 0.271954] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 2.140618] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 2.140670] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 2.140719] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15) [ 2.140769] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 2.140817] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15) [ 2.140864] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 2.140909] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 2.140956] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15) [ 2.141120] ACPI: Enabled 6 GPEs in block 00 to 3F [ 2.141206] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 2.141207] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 2.141209] vgaarb: loaded [ 2.141210] vgaarb: bridge control possible 0000:00:02.0 [ 2.141237] Registered efivars operations [ 2.141309] PCI: Using ACPI for IRQ routing [ 2.142645] PCI: pci_cache_line_size set to 64 bytes [ 2.142674] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 2.142675] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 2.142676] e820: reserve RAM buffer [mem 0xd2182000-0xd3ffffff] [ 2.142676] e820: reserve RAM buffer [mem 0xd25bf000-0xd3ffffff] [ 2.142677] e820: reserve RAM buffer [mem 0xd7eeb000-0xd7ffffff] [ 2.142678] e820: reserve RAM buffer [mem 0xd8760000-0xdbffffff] [ 2.142679] e820: reserve RAM buffer [mem 0xd8fae000-0xdbffffff] [ 2.142680] e820: reserve RAM buffer [mem 0xda71d000-0xdbffffff] [ 2.142680] e820: reserve RAM buffer [mem 0xdbe11000-0xdbffffff] [ 2.142681] e820: reserve RAM buffer [mem 0x21ee00000-0x21fffffff] [ 2.142815] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 2.142820] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 2.144851] clocksource: Switched to clocksource hpet [ 2.152446] VFS: Disk quotas dquot_6.6.0 [ 2.152460] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.152530] pnp: PnP ACPI init [ 2.152595] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 2.152598] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 2.152741] system 00:01: [io 0x0680-0x069f] has been reserved [ 2.152743] system 00:01: [io 0xffff] has been reserved [ 2.152744] system 00:01: [io 0xffff] has been reserved [ 2.152744] system 00:01: [io 0xffff] has been reserved [ 2.152745] system 00:01: [io 0x1c00-0x1cfe] has been reserved [ 2.152746] system 00:01: [io 0x1d00-0x1dfe] has been reserved [ 2.152747] system 00:01: [io 0x1e00-0x1efe] has been reserved [ 2.152748] system 00:01: [io 0x1f00-0x1ffe] has been reserved [ 2.152749] system 00:01: [io 0x1800-0x18fe] has been reserved [ 2.152750] system 00:01: [io 0x164e-0x164f] has been reserved [ 2.152752] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.152771] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 2.152808] system 00:03: [io 0x1854-0x1857] has been reserved [ 2.152810] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 2.152905] system 00:04: [io 0x0a00-0x0a0f] has been reserved [ 2.152907] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.152943] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 2.152945] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.153370] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 2.153371] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 2.153372] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 2.153373] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 2.153375] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved [ 2.153376] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 2.153377] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved [ 2.153378] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved [ 2.153379] system 00:06: [mem 0xff000000-0xffffffff] has been reserved [ 2.153380] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved [ 2.153381] system 00:06: [mem 0xf7fdf000-0xf7fdffff] has been reserved [ 2.153382] system 00:06: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 2.153384] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.153577] pnp: PnP ACPI: found 7 devices [ 2.159935] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 2.159940] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 2.159941] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 2.159942] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 2.159943] pci_bus 0000:00: resource 7 [mem 0x000d8000-0x000dbfff window] [ 2.159944] pci_bus 0000:00: resource 8 [mem 0x000dc000-0x000dffff window] [ 2.159945] pci_bus 0000:00: resource 9 [mem 0xdf200000-0xfeafffff window] [ 2.160020] NET: Registered protocol family 2 [ 2.160164] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 2.160450] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes) [ 2.161050] TCP: Hash tables configured (established 65536 bind 65536) [ 2.161098] UDP hash table entries: 4096 (order: 7, 524288 bytes) [ 2.161216] UDP-Lite hash table entries: 4096 (order: 7, 524288 bytes) [ 2.161335] NET: Registered protocol family 1 [ 2.161345] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.208952] PCI: CLS 64 bytes, default 64 [ 2.208997] Unpacking initramfs... [ 2.511835] Freeing initrd memory: 23516K [ 2.511852] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.511854] software IO TLB: mapped [mem 0xcb316000-0xcf316000] (64MB) [ 2.512166] audit: initializing netlink subsys (disabled) [ 2.512178] audit: type=2000 audit(1585134379.648:1): initialized [ 2.512566] workingset: timestamp_bits=40 max_order=21 bucket_order=0 [ 2.513882] zbud: loaded [ 2.514616] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 2.514640] io scheduler noop registered [ 2.514641] io scheduler deadline registered [ 2.514664] io scheduler cfq registered (default) [ 2.514719] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.514722] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.514736] efifb: probing for efifb [ 2.514749] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k [ 2.514750] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 2.514750] efifb: scrolling: redraw [ 2.514751] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 2.516019] Console: switching to colour frame buffer device 128x48 [ 2.517216] fb0: EFI VGA frame buffer device [ 2.517346] GHES: HEST is not enabled! [ 2.517400] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.517638] serial 0000:00:16.3: enabling device (0000 -> 0003) [ 2.538015] 0000:00:16.3: ttyS0 at I/O 0xf0e0 (irq = 19, base_baud = 115200) is a 16550A [ 2.538234] Linux agpgart interface v0.103 [ 2.538304] AMD IOMMUv2 driver by Joerg Roedel [ 2.538305] AMD IOMMUv2 functionality not available on this system [ 2.538578] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 2.541290] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.541318] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.541402] mousedev: PS/2 mouse device common for all mice [ 2.541445] rtc_cmos 00:02: RTC can wake from S4 [ 2.541568] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 2.541613] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 2.541621] intel_pstate: Intel P-state driver initializing [ 2.542135] NET: Registered protocol family 10 [ 2.542283] mip6: Mobile IPv6 [ 2.542291] NET: Registered protocol family 17 [ 2.542293] mpls_gso: MPLS GSO support [ 2.542294] mce: Unable to init device /dev/mcelog (rc: -5) [ 2.542361] microcode: sig=0x306c3, pf=0x2, revision=0x27 [ 2.542413] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 2.542526] registered taskstats version 1 [ 2.542543] zswap: loaded using pool lzo/zbud [ 2.542572] ima: No TPM chip found, activating TPM-bypass! [ 2.542573] ima: Allocated hash algorithm: sha256 [ 2.542790] rtc_cmos 00:02: setting system clock to 2020-03-25 11:06:22 UTC (1585134382) [ 2.542849] PM: Hibernation image not present or could not be loaded. [ 2.765120] Freeing unused kernel memory: 1684K [ 2.765121] Write protecting the kernel read-only data: 12288k [ 2.766137] Freeing unused kernel memory: 1756K [ 2.768097] Freeing unused kernel memory: 1180K [ 2.771911] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.782080] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.782128] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.782134] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.805603] ACPI: bus type USB registered [ 2.805621] usbcore: registered new interface driver usbfs [ 2.805629] usbcore: registered new interface driver hub [ 2.805648] usbcore: registered new device driver usb [ 2.806505] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.806509] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 2.807596] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 2.807600] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 2.809962] SCSI subsystem initialized [ 2.810043] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.810044] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.810045] usb usb1: Product: xHCI Host Controller [ 2.810046] usb usb1: Manufacturer: Linux 4.9.0-12-rt-amd64 xhci-hcd [ 2.810046] usb usb1: SerialNumber: 0000:00:14.0 [ 2.810154] hub 1-0:1.0: USB hub found [ 2.810175] hub 1-0:1.0: 15 ports detected [ 2.821537] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.821540] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 2.821588] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.821589] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.821590] usb usb2: Product: xHCI Host Controller [ 2.821591] usb usb2: Manufacturer: Linux 4.9.0-12-rt-amd64 xhci-hcd [ 2.821592] usb usb2: SerialNumber: 0000:00:14.0 [ 2.821700] hub 2-0:1.0: USB hub found [ 2.821717] hub 2-0:1.0: 6 ports detected [ 2.822061] usb: port power management may be unreliable [ 2.822481] pps_core: LinuxPPS API ver. 1 registered [ 2.822482] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.822662] PTP clock support registered [ 2.823277] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 2.823277] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.823430] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.823579] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.823745] ehci-pci: EHCI PCI platform driver [ 2.828164] libata version 3.00 loaded. [ 2.843071] ACPI: Invalid active0 threshold [ 2.843153] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.843154] ACPI: Thermal Zone [TZ00] (28 C) [ 2.843328] thermal LNXTHERM:01: registered as thermal_zone1 [ 2.843328] ACPI: Thermal Zone [TZ01] (30 C) [ 2.853252] AVX2 version of gcm_enc/dec engaged. [ 2.853253] AES CTR mode by8 optimization enabled [ 2.914553] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 2.999508] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 98:90:96:b2:a8:0c [ 2.999509] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.999538] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 2.999701] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 2.999705] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 2.999716] ehci-pci 0000:00:1a.0: debug port 2 [ 3.003609] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 3.003638] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c38000 [ 3.016839] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 3.016876] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.016877] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.016878] usb usb3: Product: EHCI Host Controller [ 3.016879] usb usb3: Manufacturer: Linux 4.9.0-12-rt-amd64 ehci_hcd [ 3.016879] usb usb3: SerialNumber: 0000:00:1a.0 [ 3.016987] hub 3-0:1.0: USB hub found [ 3.016991] hub 3-0:1.0: 3 ports detected [ 3.017128] ahci 0000:00:1f.2: version 3.0 [ 3.017295] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode [ 3.017297] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 3.021906] scsi host0: ahci [ 3.026003] scsi host1: ahci [ 3.030088] scsi host2: ahci [ 3.034166] scsi host3: ahci [ 3.038245] scsi host4: ahci [ 3.042325] scsi host5: ahci [ 3.042364] ata1: SATA max UDMA/133 abar m2048@0xf7c36000 port 0xf7c36100 irq 26 [ 3.042365] ata2: DUMMY [ 3.042365] ata3: DUMMY [ 3.042366] ata4: DUMMY [ 3.042366] ata5: DUMMY [ 3.042367] ata6: DUMMY [ 3.042491] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 3.042554] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 3.043381] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 3.043384] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 3.043395] ehci-pci 0000:00:1d.0: debug port 2 [ 3.047307] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 3.047345] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c37000 [ 3.140837] usb 1-3: new high-speed USB device number 2 using xhci_hcd [ 3.156840] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 3.156903] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.156904] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.156905] usb usb4: Product: EHCI Host Controller [ 3.156905] usb usb4: Manufacturer: Linux 4.9.0-12-rt-amd64 ehci_hcd [ 3.156906] usb usb4: SerialNumber: 0000:00:1d.0 [ 3.157014] hub 4-0:1.0: USB hub found [ 3.157018] hub 4-0:1.0: 3 ports detected [ 3.298038] usb 1-3: New USB device found, idVendor=05e3, idProduct=0610 [ 3.298040] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.298041] usb 1-3: Product: USB2.0 Hub [ 3.298528] hub 1-3:1.0: USB hub found [ 3.298804] hub 1-3:1.0: 4 ports detected [ 3.344825] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 3.355153] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.356760] ata1.00: supports DRM functions and may not be fully accessible [ 3.357437] ata1.00: disabling queued TRIM support [ 3.357438] ata1.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT02B6Q, max UDMA/133 [ 3.357439] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 3.358075] ata1.00: supports DRM functions and may not be fully accessible [ 3.358634] ata1.00: disabling queued TRIM support [ 3.359014] ata1.00: configured for UDMA/133 [ 3.359176] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5 [ 3.400453] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 3.400477] sd 0:0:0:0: [sda] Write Protect is off [ 3.400478] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.400485] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.401856] sda: sda1 sda2 sda3 [ 3.402101] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.434905] PM: Starting manual resume from disk [ 3.434907] PM: Hibernation image partition 8:3 present [ 3.434908] PM: Looking for hibernation image. [ 3.435056] PM: Image not found (code -22) [ 3.435057] PM: Hibernation image not present or could not be loaded. [ 3.488831] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 3.493164] usb 3-1: New USB device found, idVendor=8087, idProduct=8008 [ 3.493166] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.493311] hub 3-1:1.0: USB hub found [ 3.493412] hub 3-1:1.0: 6 ports detected [ 3.499651] random: fast init done [ 3.502707] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 3.524841] tsc: Refined TSC clocksource calibration: 2993.072 MHz [ 3.524846] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b24b4c4965, max_idle_ns: 440795281727 ns [ 3.577588] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.588822] usb 1-3.1: new low-speed USB device number 3 using xhci_hcd [ 3.590809] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 3.590972] systemd[1]: Detected architecture x86-64. [ 3.591287] systemd[1]: Set hostname to . [ 3.637162] usb 4-1: New USB device found, idVendor=8087, idProduct=8000 [ 3.637164] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.637311] hub 4-1:1.0: USB hub found [ 3.637407] hub 4-1:1.0: 8 ports detected [ 3.644584] systemd[1]: apt-daily.timer: Cannot add dependency job, ignoring: Unit apt-daily.timer is masked. [ 3.644588] systemd[1]: apt-daily-upgrade.timer: Cannot add dependency job, ignoring: Unit apt-daily-upgrade.timer is masked. [ 3.644595] systemd[1]: avahi-daemon.socket: Cannot add dependency job, ignoring: Unit avahi-daemon.socket is masked. [ 3.644600] systemd[1]: cron.service: Cannot add dependency job, ignoring: Unit cron.service is masked. [ 3.644611] systemd[1]: lm-sensors.service: Cannot add dependency job, ignoring: Unit lm-sensors.service is masked. [ 3.644626] systemd[1]: cups-browsed.service: Cannot add dependency job, ignoring: Unit cups-browsed.service is masked. [ 3.644648] systemd[1]: live-tools.service: Cannot add dependency job, ignoring: Unit live-tools.service is masked. [ 3.663975] lp: driver loaded but no devices found [ 3.668472] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 3.676945] RPC: Registered named UNIX socket transport module. [ 3.676947] RPC: Registered udp transport module. [ 3.676947] RPC: Registered tcp transport module. [ 3.676948] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.678272] ppdev: user-space parallel port driver [ 3.715302] usb 1-3.1: New USB device found, idVendor=04d9, idProduct=0006 [ 3.715304] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.715305] usb 1-3.1: Product: RPI Wired Keyboard 5 [ 3.715306] usb 1-3.1: Manufacturer: [ 3.767121] systemd-journald[247]: Received request to flush runtime journal from PID 1 [ 3.796846] usb 1-3.4: new low-speed USB device number 4 using xhci_hcd [ 3.839912] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 [ 3.839915] ACPI: Power Button [PWRB] [ 3.839952] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 3.839953] ACPI: Power Button [PWRF] [ 3.844374] wmi: Mapper loaded [ 3.900628] usb 1-3.4: New USB device found, idVendor=093a, idProduct=2510 [ 3.900630] usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.900631] usb 1-3.4: Product: USB Optical Mouse [ 3.900631] usb 1-3.4: Manufacturer: PixArt [ 3.923466] hidraw: raw HID events driver (C) Jiri Kosina [ 3.927757] [drm] Initialized [ 3.934767] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 3.952379] usbcore: registered new interface driver usbhid [ 3.952381] usbhid: USB HID core driver [ 3.973796] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.982937] [drm] Memory usable by graphics device = 2048M [ 3.982940] checking generic (e0000000 300000) vs hw (e0000000 10000000) [ 3.982940] fb: switching to inteldrmfb from EFI VGA [ 3.982957] Console: switching to colour dummy device 80x25 [ 3.983018] [drm] Replacing VGA console driver [ 3.990676] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.990678] [drm] Driver supports precise vblank timestamp query. [ 3.993214] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 4.018693] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 4.018909] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 4.018973] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 4.018978] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0 [ 4.019987] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 4.020778] EFI Variables Facility v0.08 2004-May-17 [ 4.030356] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 4.030357] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 4.030358] RAPL PMU: hw unit of domain package 2^-14 Joules [ 4.030358] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 4.030359] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 4.033887] pstore: using zlib compression [ 4.033893] pstore: Registered efi as persistent store backend [ 4.049589] fbcon: inteldrmfb (fb0) is primary device [ 4.054149] Adding 8294396k swap on /dev/sda3. Priority:-1 extents:1 across:8294396k SSFS [ 4.074557] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7 [ 4.074582] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8 [ 4.081974] kvm: disabled by bios [ 4.141878] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 4.144937] kvm: disabled by bios [ 4.154073] dell_wmi: Detected Dell WMI interface version 1 [ 4.154111] input: Dell WMI hotkeys as /devices/virtual/input/input9 [ 4.155406] Console: switching to colour frame buffer device 160x64 [ 4.173960] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 4.229420] input: RPI Wired Keyboard 5 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1:1.0/0003:04D9:0006.0001/input/input10 [ 4.229571] iTCO_vendor_support: vendor-support=0 [ 4.232441] kvm: disabled by bios [ 4.232580] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 4.232614] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860) [ 4.232697] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 4.289250] hid-generic 0003:04D9:0006.0001: input,hidraw0: USB HID v1.11 Keyboard [ RPI Wired Keyboard 5] on usb-0000:00:14.0-3.1/input0 [ 4.290036] input: RPI Wired Keyboard 5 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1:1.1/0003:04D9:0006.0002/input/input11 [ 4.315257] kvm: disabled by bios [ 4.348921] hid-generic 0003:04D9:0006.0002: input,hidraw1: USB HID v1.11 Device [ RPI Wired Keyboard 5] on usb-0000:00:14.0-3.1/input1 [ 4.349041] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4:1.0/0003:093A:2510.0003/input/input12 [ 4.349236] hid-generic 0003:093A:2510.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-3.4/input0 [ 4.395292] intel_rapl: Found RAPL domain package [ 4.395294] intel_rapl: Found RAPL domain core [ 4.395295] intel_rapl: Found RAPL domain uncore [ 4.395297] intel_rapl: Found RAPL domain dram [ 4.395299] intel_rapl: RAPL package 0 domain package locked by BIOS [ 4.395307] intel_rapl: RAPL package 0 domain dram locked by BIOS [ 4.548858] clocksource: Switched to clocksource tsc [ 4.776934] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.151053] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 8.151084] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 141.049583] random: crng init done [ 141.049584] random: 7 urandom warning(s) missed due to ratelimiting [ 173.587111] fuse init (API version 7.26)