Error report created by /usr/lib/tcltk/linuxcnc/show_errors.tcl: Print file information: RUN_IN_PLACE=no LINUXCNC_DIR= LINUXCNC_BIN_DIR=/usr/bin LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc LINUXCNC_SCRIPT_DIR= LINUXCNC_RTLIB_DIR=/usr/lib/linuxcnc/modules LINUXCNC_CONFIG_DIR= LINUXCNC_LANG_DIR=/usr/lib/tcltk/linuxcnc/msgs INIVAR=inivar HALCMD=halcmd LINUXCNC_EMCSH=/usr/bin/wish8.6 LINUXCNC - 2.9.0-pre0-1456-gdb3a15891 Machine configuration directory is '/home/piotr/linuxcnc/configs/711' Machine configuration file is '711.ini' INIFILE=/home/piotr/linuxcnc/configs/711/711.ini VERSION=1.1 PARAMETER_FILE=linuxcnc.var TASK=d milltask HALUI=halui DISPLAY=axis COORDINATES=XXYZ KINEMATICS=trivkins coordinates=XXYZ Starting LinuxCNC... Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Starting LinuxCNC IO program: io Starting HAL User Interface program: halui Found file(REL): ./711.hal Found file(REL): ./custom.hal Starting TASK program: d milltask Can't execute TASK program d milltask Shutting down and cleaning up LinuxCNC... Running HAL shutdown script trivkins: coordinates:XXYZ Joint 0 ==> Axis X Joint 1 ==> Axis X Joint 2 ==> Axis Y Joint 3 ==> Axis Z trivkins: Recommend: kinstype=both hm2: loading Mesa HostMot2 driver version 0.15 hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.2 hm2_eth: 10.10.10.11: Hardware address: 00:60:1b:14:00:35 hm2_eth: discovered 7I93 hm2/hm2_7i93.0: Low Level init 0.15 hm2/hm2_7i93.0: 48 I/O Pins used: hm2/hm2_7i93.0: IO Pin 000 (P2-01): IOPort hm2/hm2_7i93.0: IO Pin 001 (P2-03): IOPort hm2/hm2_7i93.0: IO Pin 002 (P2-05): IOPort hm2/hm2_7i93.0: IO Pin 003 (P2-07): IOPort hm2/hm2_7i93.0: IO Pin 004 (P2-09): IOPort hm2/hm2_7i93.0: IO Pin 005 (P2-11): IOPort hm2/hm2_7i93.0: IO Pin 006 (P2-13): IOPort hm2/hm2_7i93.0: IO Pin 007 (P2-15): IOPort hm2/hm2_7i93.0: IO Pin 008 (P2-17): IOPort hm2/hm2_7i93.0: IO Pin 009 (P2-19): IOPort hm2/hm2_7i93.0: IO Pin 010 (P2-21): Encoder #0, pin A (Input) hm2/hm2_7i93.0: IO Pin 011 (P2-23): Encoder #0, pin B (Input) hm2/hm2_7i93.0: IO Pin 012 (P2-25): Encoder #1, pin A (Input) hm2/hm2_7i93.0: IO Pin 013 (P2-27): Encoder #1, pin B (Input) hm2/hm2_7i93.0: IO Pin 014 (P2-29): Encoder #2, pin A (Input) hm2/hm2_7i93.0: IO Pin 015 (P2-31): Encoder #2, pin B (Input) hm2/hm2_7i93.0: IO Pin 016 (P2-33): Encoder #3, pin A (Input) hm2/hm2_7i93.0: IO Pin 017 (P2-35): Encoder #3, pin B (Input) hm2/hm2_7i93.0: IO Pin 018 (P2-37): IOPort hm2/hm2_7i93.0: IO Pin 019 (P2-39): IOPort hm2/hm2_7i93.0: IO Pin 020 (P2-41): IOPort hm2/hm2_7i93.0: IO Pin 021 (P2-43): IOPort hm2/hm2_7i93.0: IO Pin 022 (P2-45): IOPort hm2/hm2_7i93.0: IO Pin 023 (P2-47): IOPort hm2/hm2_7i93.0: IO Pin 024 (P1-01): IOPort hm2/hm2_7i93.0: IO Pin 025 (P1-03): IOPort hm2/hm2_7i93.0: IO Pin 026 (P1-05): IOPort hm2/hm2_7i93.0: IO Pin 027 (P1-07): IOPort hm2/hm2_7i93.0: IO Pin 028 (P1-09): StepGen #0, pin Step (Output) hm2/hm2_7i93.0: IO Pin 029 (P1-11): StepGen #0, pin Direction (Output) hm2/hm2_7i93.0: IO Pin 030 (P1-13): StepGen #1, pin Step (Output) hm2/hm2_7i93.0: IO Pin 031 (P1-15): StepGen #1, pin Direction (Output) hm2/hm2_7i93.0: IO Pin 032 (P1-17): StepGen #2, pin Step (Output) hm2/hm2_7i93.0: IO Pin 033 (P1-19): StepGen #2, pin Direction (Output) hm2/hm2_7i93.0: IO Pin 034 (P1-21): StepGen #3, pin Step (Output) hm2/hm2_7i93.0: IO Pin 035 (P1-23): StepGen #3, pin Direction (Output) hm2/hm2_7i93.0: IO Pin 036 (P1-25): IOPort hm2/hm2_7i93.0: IO Pin 037 (P1-27): IOPort hm2/hm2_7i93.0: IO Pin 038 (P1-29): IOPort hm2/hm2_7i93.0: IO Pin 039 (P1-31): IOPort hm2/hm2_7i93.0: IO Pin 040 (P1-33): PWMGen #0, pin Out0 (PWM or Up) (Output) hm2/hm2_7i93.0: IO Pin 041 (P1-35): PWMGen #1, pin Out0 (PWM or Up) (Output) hm2/hm2_7i93.0: IO Pin 042 (P1-37): IOPort hm2/hm2_7i93.0: IO Pin 043 (P1-39): IOPort hm2/hm2_7i93.0: IO Pin 044 (P1-41): IOPort hm2/hm2_7i93.0: IO Pin 045 (P1-43): IOPort hm2/hm2_7i93.0: IO Pin 046 (P1-45): IOPort hm2/hm2_7i93.0: IO Pin 047 (P1-47): IOPort hm2/hm2_7i93.0: registered hm2_eth: ERROR: Failed to execute '/sbin/sysctl -q net.ipv6.conf.eth0:avahi.disable_ipv6=1' hm2_eth: HostMot2 ethernet driver unloaded hm2: unloading Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments Debug file information: Note: Using POSIX realtime sysctl: cannot stat /proc/sys/net/ipv6/conf/eth0:avahi/disable_ipv6: No such file or directory 1106 Stopping realtime threads Unloading hal components Note: Using POSIX realtime ----------------------------------------------------------------------- Info report created by linuxcnc_info: The file: /tmp/linuxcnc_info.txt can be posted to a forum or a web site like: http://pastebin.com in order to provide information about the linuxcnc system and configuration. Date: Fri 17 Apr 20:04:54 BST 2020 UTC Date: Fri 17 Apr 19:04:54 UTC 2020 this program: /usr/bin/linuxcnc_info uptime: 20:04:54 up 16 min, 1 user, load average: 0.11, 0.03, 0.01 lsb_release -sa: Debian Debian GNU/Linux 9.12 (stretch) 9.12 stretch which linuxcnc: /usr/bin/linuxcnc pwd: /home/piotr/linuxcnc/configs/711 USER: piotr LOGNAME: piotr HOME: /home/piotr EDITOR: VISUAL: LANGUAGE: en_GB:en TERM: dumb COLORTERM: DISPLAY: :0.0 DESKTOP: lightdm-xsession display size: 1024x768 pixels (270x203 millimeters) PATH: /usr/bin:/home/piotr/linuxcnc/configs/711/bin:/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games uname items: nodename -n: debian kernel-name -s: Linux kernel-vers -v: #1 SMP PREEMPT RT Debian 4.9.210-1 (2020-01-20) machine -m: i686 processor -p: unknown platform -i: unknown oper system -o: GNU/Linux /proc items: cmdline: BOOT_IMAGE=/boot/vmlinuz-4.9.0-12-rt-686-pae root=UUID=d1ddb21d-0a8d-4279-8230-4735018f882b ro quiet model name: Intel(R) Celeron(R) CPU G3930 @ 2.90GHz cores: 2 cpu MHz: 2367.578 parport: serial: Versions: gcc: gcc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516 python: Python 2.7.13 git: not_in_PATH git commit: NA tcl: 8.6 tk: 8.6 glade: not_in_PATH glade-gtk2: not_in_PATH linuxcnc_var all: LINUXCNCVERSION: 2.9.0-pre0-1456-gdb3a15891 LINUXCNC_AUX_GLADEVCP: /usr/share/linuxcnc/aux_gladevcp LINUXCNC_AUX_EXAMPLES: /usr/share/linuxcnc/aux_examples REALTIME: /etc/init.d/realtime RTS: uspace HALLIB_DIR: /usr/share/linuxcnc/hallib dpkg -l '*linuxcnc*': Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Architecture Description +++-===============-============================-============-===================================================================== un linuxcnc (no description available) un linuxcnc-doc (no description available) ii linuxcnc-doc-en 1:2.9.0~pre0.1456.gdb3a15891 all motion controller for CNC machines and robots (English documentation) un linuxcnc-sim (no description available) ii linuxcnc-uspace 1:2.9.0~pre0.1456.gdb3a15891 i386 motion controller for CNC machines and robots