Error report created by /usr/lib/tcltk/linuxcnc/show_errors.tcl: Print file information: RUN_IN_PLACE=no LINUXCNC_DIR= LINUXCNC_BIN_DIR=/usr/bin LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc LINUXCNC_SCRIPT_DIR= LINUXCNC_RTLIB_DIR=/usr/lib/linuxcnc/modules LINUXCNC_CONFIG_DIR= LINUXCNC_LANG_DIR=/usr/lib/tcltk/linuxcnc/msgs INIVAR=inivar HALCMD=halcmd LINUXCNC_EMCSH=/usr/bin/wish8.6 LINUXCNC - 2.9.0-pre1-121-gec3cd721e Machine configuration directory is '/home/st/linuxcnc/configs/TPK-125BH1-7i96s' Machine configuration file is 'TPK-125BH1-7i96s.ini' INIFILE=/home/st/linuxcnc/configs/TPK-125BH1-7i96s/TPK-125BH1-7i96s.ini VERSION=1.1 PARAMETER_FILE=linuxcnc.var TPMOD= HOMEMOD= TASK=milltask HALUI=halui DISPLAY=axis COORDINATES=XZ KINEMATICS=trivkins coordinates=XZ Starting LinuxCNC... Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Starting LinuxCNC IO program: io Starting HAL User Interface program: halui linuxcnc TPMOD=tpmod HOMEMOD=homemod EMCMOT=motmod Found file(REL): ./TPK-125BH1-7i96s.hal Found file(REL): ./custom.hal Starting TASK program: milltask Starting DISPLAY program: axis Embeded tab command "halcmd loadusr -Wn gladevcp gladevcp -c gladevcp -u lathehandler.py -x 46137529 -g 300x200+0+0 lathemacro.ui" exited with error: 1 Shutting down and cleaning up LinuxCNC... Running HAL shutdown script task: 357 cycles, min=0.000008, max=0.010843, avg=0.009497, 0 latency excursions (> 10x expected cycle time of 0.010000s) hm2: loading Mesa HostMot2 driver version 0.15 hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.2 hm2_eth: 10.10.10.10: INFO: Hardware address (MAC): 00:60:1b:16:80:20 hm2_eth: discovered 7I96S hm2/hm2_7i96s.0: Low Level init 0.15 hm2/hm2_7i96s.0: Smart Serial Firmware Version 43 hm2/hm2_7i96s.0: 51 I/O Pins used: hm2/hm2_7i96s.0: IO Pin 000 (TB3-01): InM Input Module #0, pin in0 (Input) hm2/hm2_7i96s.0: IO Pin 001 (TB3-02): InM Input Module #0, pin in1 (Input) hm2/hm2_7i96s.0: IO Pin 002 (TB3-03): InM Input Module #0, pin in2 (Input) hm2/hm2_7i96s.0: IO Pin 003 (TB3-04): InM Input Module #0, pin in3 (Input) hm2/hm2_7i96s.0: IO Pin 004 (TB3-05): InM Input Module #0, pin in4 (Input) hm2/hm2_7i96s.0: IO Pin 005 (TB3-06): InM Input Module #0, pin in5 (Input) hm2/hm2_7i96s.0: IO Pin 006 (TB3-07): InM Input Module #0, pin in6 (Input) hm2/hm2_7i96s.0: IO Pin 007 (TB3-08): InM Input Module #0, pin in7 (Input) hm2/hm2_7i96s.0: IO Pin 008 (TB3-09): InM Input Module #0, pin in8 (Input) hm2/hm2_7i96s.0: IO Pin 009 (TB3-10): InM Input Module #0, pin in9 (Input) hm2/hm2_7i96s.0: IO Pin 010 (TB3-11): InM Input Module #0, pin in10 (Input) hm2/hm2_7i96s.0: IO Pin 011 (TB3-13/TB3-14): SSR #0, pin Out-00 (Output) hm2/hm2_7i96s.0: IO Pin 012 (TB3-15/TB3-16): SSR #0, pin Out-01 (Output) hm2/hm2_7i96s.0: IO Pin 013 (TB3-17/TB3-18): SSR #0, pin Out-02 (Output) hm2/hm2_7i96s.0: IO Pin 014 (TB3-19/TB3-20): SSR #0, pin Out-03 (Output) hm2/hm2_7i96s.0: IO Pin 015 (TB3-21/TB3-22): OutM Output Module #0, pin Out-04 (Output) hm2/hm2_7i96s.0: IO Pin 016 (TB3-23/TB3-24): OutM Output Module #0, pin Out-05 (Output) hm2/hm2_7i96s.0: IO Pin 017 (TB1-02/TB1-03): StepGen #0, pin Step (Output) hm2/hm2_7i96s.0: IO Pin 018 (TB1-04/TB1-05): StepGen #0, pin Direction (Output) hm2/hm2_7i96s.0: IO Pin 019 (TB1-08/TB1-09): StepGen #1, pin Step (Output) hm2/hm2_7i96s.0: IO Pin 020 (TB1-10/TB1-11): StepGen #1, pin Direction (Output) hm2/hm2_7i96s.0: IO Pin 021 (TB1-14/TB1-15): IOPort hm2/hm2_7i96s.0: IO Pin 022 (TB1-16/TB1-17): IOPort hm2/hm2_7i96s.0: IO Pin 023 (TB1-20/TB1-21): IOPort hm2/hm2_7i96s.0: IO Pin 024 (TB1-22-TB1-23): IOPort hm2/hm2_7i96s.0: IO Pin 025 (TB2-02/TB2-03): IOPort hm2/hm2_7i96s.0: IO Pin 026 (TB2-04/TB2-05): IOPort hm2/hm2_7i96s.0: IO Pin 027 (TB2-07/TB2-08): Encoder #0, pin A (Input) hm2/hm2_7i96s.0: IO Pin 028 (TB2-10/TB2-11): Encoder #0, pin B (Input) hm2/hm2_7i96s.0: IO Pin 029 (TB2-13/TB2-14): Encoder #0, pin Index (Input) hm2/hm2_7i96s.0: IO Pin 030 (TB2-16/TB2-17): IOPort hm2/hm2_7i96s.0: IO Pin 031 (TB2-18/TB2-19): IOPort hm2/hm2_7i96s.0: IO Pin 032 (internal): IOPort hm2/hm2_7i96s.0: IO Pin 033 (internal): SSR #0, pin AC Ref (internal) (Output) hm2/hm2_7i96s.0: IO Pin 034 (P1-01/DB25-01): StepGen #0, pin Index (Input) hm2/hm2_7i96s.0: IO Pin 035 (P1-02/DB25-14): StepGen #1, pin Index (Input) hm2/hm2_7i96s.0: IO Pin 036 (P1-03/DB25-02): IOPort hm2/hm2_7i96s.0: IO Pin 037 (P1-04/DB25-15): IOPort hm2/hm2_7i96s.0: IO Pin 038 (P1-05/DB25-03): IOPort hm2/hm2_7i96s.0: IO Pin 039 (P1-06/DB25-16): IOPort hm2/hm2_7i96s.0: IO Pin 040 (P1-07/DB25-04): IOPort hm2/hm2_7i96s.0: IO Pin 041 (P1-08/DB25-17): IOPort hm2/hm2_7i96s.0: IO Pin 042 (P1-09/DB25-05): IOPort hm2/hm2_7i96s.0: IO Pin 043 (P1-11/DB25-06): IOPort hm2/hm2_7i96s.0: IO Pin 044 (P1-13/DB25-07): IOPort hm2/hm2_7i96s.0: IO Pin 045 (P1-15/DB25-08): IOPort hm2/hm2_7i96s.0: IO Pin 046 (P1-17/DB25-09): IOPort hm2/hm2_7i96s.0: IO Pin 047 (P1-19/DB25-10): IOPort hm2/hm2_7i96s.0: IO Pin 048 (P1-21/DB25-11): IOPort hm2/hm2_7i96s.0: IO Pin 049 (P1-23/DB25-12): IOPort hm2/hm2_7i96s.0: IO Pin 050 (P1-25/DB25-13): IOPort hm2/hm2_7i96s.0: registered hm2_eth: in hm2_eth_reset hm2_eth: HostMot2 ethernet driver unloaded hm2: unloading Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments Debug file information: Note: Using POSIX realtime [GladeVCP][INFO] Logging to: /home/st/gladevcp.log (logger.py:107) [GladeVCP.QTVCP.QT_ISTAT][WARNING] Path not valid in INI File [DISPLAY] PROGRAM_PREFIX section (qt_istat.py:91) [GladeVCP.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No DEFAULT_SPINDLE_0_SPEED Entry in DISPLAY, Using: 200 (qt_istat.py:477) [GladeVCP.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MIN_SPINDLE_0_SPEED Entry in DISPLAY, Using: 100 (qt_istat.py:477) [GladeVCP.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MAX_SPINDLE_0_SPEED Entry in DISPLAY, Using: 2500 (qt_istat.py:477) [GladeVCP.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MAX_SPINDLE_0_OVERRIDE Entry in DISPLAY, Using: 1 (qt_istat.py:477) [GladeVCP.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MIN_SPINDLE_0_OVERRIDE Entry in DISPLAY, Using: 0.5 (qt_istat.py:477) [GladeVCP.QTVCP.QT_ISTAT][WARNING] Embeded tab configuration -invalaid number of TAB_NAMES vrs TAB_LOCATION - guessng default. (qt_istat.py:414) (gladevcp:1468): Gtk-WARNING **: 13:24:33.523: Attempting to add a widget with type GtkImage to a GtkButton, but as a GtkBin subclass a GtkButton can only contain one widget at a time; it already contains a widget of type GtkLabel Traceback (most recent call last): File "/usr/bin/gladevcp", line 346, in main() File "/usr/bin/gladevcp", line 227, in main handlers, mod, obj = load_handlers(opts.usermod,halcomp,builder,opts.useropts) File "/usr/bin/gladevcp", line 124, in load_handlers mod = __import__(basename) File "./lathehandler.py", line 54 print event.message_type,event.data ^ SyntaxError: Missing parentheses in call to 'print'. Did you mean print(event.message_type,event.data)? :0: waitpid failed gladevcp gladevcp :0: gladevcp exited without becoming ready note: MAXV max: 16.000 units/sec 960.000 units/min note: LJOG max: 16.000 units/sec 960.000 units/min note: LJOG default: 3.000 units/sec 180.000 units/min note: jog_order='ZX' note: jog_invert={'X'} 1402 1455 Stopping realtime threads Unloading hal components Note: Using POSIX realtime ----------------------------------------------------------------------- Info report created by linuxcnc_info: The file: /tmp/linuxcnc_info.txt can be posted to a forum or a web site like: http://pastebin.com in order to provide information about the linuxcnc system and configuration. Date: Вто июн 11 13:25:04 EEST 2024 UTC Date: Вто июн 11 10:25:04 UTC 2024 this program: /usr/bin/linuxcnc_info uptime: 13:25:04 up 1:05, 1 user, load average: 0,60, 0,43, 0,39 lsb_release -sa: Debian Debian GNU/Linux 10 (buster) 10 buster linuxcnc: /usr/bin/linuxcnc pwd: /home/st/linuxcnc/configs/TPK-125BH1-7i96s USER: st LOGNAME: st HOME: /home/st EDITOR: VISUAL: LANGUAGE: ru_UA:ru TERM: dumb COLORTERM: DISPLAY: :0.0 DESKTOP: lightdm-xsession display size: 1280x1024 pixels (338x270 millimeters) PATH: /usr/bin:/home/st/linuxcnc/configs/TPK-125BH1-7i96s/bin:/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games uname items: nodename -n: st kernel-name -s: Linux kernel-vers -v: #1 SMP PREEMPT RT Debian 4.19.194-3 (2021-07-18) machine -m: x86_64 processor -p: unknown platform -i: unknown oper system -o: GNU/Linux /proc items: cmdline: BOOT_IMAGE=/boot/vmlinuz-4.19.0-17-rt-amd64 root=UUID=d197ab9b-f685-4e6a-9f4a-491571bb8d44 ro initrd=/install/gtk/initrd.gz quiet model name: AMD Phenom(tm) 9550 Quad-Core Processor cores: 4 cpu MHz: 2200.000 parport: serial: 0000-0000 : serial Versions: gcc: gcc (Debian 8.3.0-6) 8.3.0 python: Python 3.7.3 git: git version 2.20.1 git commit: NA tcl: 8.6 tk: 8.6 glade: not_in_PATH linuxcnc_var all: LINUXCNCVERSION: 2.9.0-pre1-121-gec3cd721e LINUXCNC_AUX_GLADEVCP: /usr/share/linuxcnc/aux_gladevcp LINUXCNC_AUX_EXAMPLES: /usr/share/linuxcnc/aux_examples REALTIME: /usr/lib/linuxcnc/realtime RTS: uspace HALLIB_DIR: /usr/share/linuxcnc/hallib PYTHON: /usr/bin/python3 dpkg -l '*linuxcnc*': Желаемый=неизвестно[u]/установить[i]/удалить[r]/вычистить[p]/зафиксировать[h] | Состояние=не[n]/установлен[i]/настроен[c]/распакован[U]/частично настроен[F]/ частично установлен[H]/trig-aWait/Trig-pend |/ Ошибка?=(нет)/требуется переустановка[R] (верхний регистр в полях состояния и ошибки указывает на ненормальную ситуацию) ||/ Имя Версия Архитектура Описание +++-===================-===========================-============-===================================================================== un linuxcnc <нет> <нет> (описание недоступно) un linuxcnc-dev <нет> <нет> (описание недоступно) un linuxcnc-doc <нет> <нет> (описание недоступно) ii linuxcnc-doc-en 1:2.9.0~pre1.121.gec3cd721e all motion controller for CNC machines and robots (English documentation) ii linuxcnc-doc-es 1:2.8.3 all controlador de movimiento para máquinas CNC y robots (Español). ii linuxcnc-doc-fr 1:2.8.3 all motion controller for CNC machines and robots (French documentation) un linuxcnc-sim <нет> <нет> (описание недоступно) un linuxcnc-sim-dev <нет> <нет> (описание недоступно) ii linuxcnc-uspace 1:2.9.0~pre1.121.gec3cd721e amd64 motion controller for CNC machines and robots ii linuxcnc-uspace-dev 1:2.9.0~pre1.121.gec3cd721e amd64 PC based motion controller for real-time Linux