# Generated by stepconf at Wed Nov 27 17:35:08 2013
# If you make changes to this file, they will be
# overwritten when you run stepconf again

[EMC]
MACHINE = Shizuoka-mesa
DEBUG = 0

[STEP_DATA]
#DATA0 = 0x06040c08
#DATA1 = 0x09010302
DATA0 = 0x090b0307
DATA1 = 0x060e0c0d

[SPINDLE]
SCALE = 8260

[DISPLAY]
DISPLAY = axis
EDITOR = gedit
POSITION_OFFSET = RELATIVE
POSITION_FEEDBACK = ACTUAL
MAX_FEED_OVERRIDE = 1.2
INTRO_GRAPHIC = linuxcnc.gif
INTRO_TIME = 5
PROGRAM_PREFIX = /home/nick/linuxcnc/nc_files
INCREMENTS = .1in .05in .01in .005in .001in .0005in .0001in

[FILTER]
PROGRAM_EXTENSION = .png,.gif,.jpg Greyscale Depth Image
PROGRAM_EXTENSION = .py Python Script
png = image-to-gcode
gif = image-to-gcode
jpg = image-to-gcode
py = python

[TASK]
TASK = milltask
CYCLE_TIME = 0.010

[RS274NGC]
PARAMETER_FILE = linuxcnc.var

[EMCMOT]
EMCMOT = motmod
COMM_TIMEOUT = 1.0
COMM_WAIT = 0.010
BASE_PERIOD = 100000
SERVO_PERIOD = 1000000

[HAL]
HALFILE = Shizuoka-mesa.hal
HALFILE = custom.hal
POSTGUI_HALFILE = custom_postgui.hal

[TRAJ]
AXES = 3
COORDINATES = X Y Z
LINEAR_UNITS = inch
ANGULAR_UNITS = degree
CYCLE_TIME = 0.010
DEFAULT_VELOCITY = 0.10
MAX_LINEAR_VELOCITY = 1.00

[EMCIO]
EMCIO = io
CYCLE_TIME = 0.100
TOOL_TABLE = tool.tbl

[AXIS_0]
TYPE = LINEAR
HOME = 0.0
MAX_VELOCITY = 1
MAX_ACCELERATION = 1.0
STEPGEN_MAXACCEL = 37.5
SCALE = 2250
FERROR = 0.05
MIN_FERROR = 0.01
MIN_LIMIT = -0.01
MAX_LIMIT = 8.0
HOME_OFFSET = 0.0

[AXIS_1]
TYPE = LINEAR
HOME = 0.0
MAX_VELOCITY = 1
MAX_ACCELERATION = 1.0
STEPGEN_MAXACCEL = 37.5
SCALE = 2250
FERROR = 0.05
MIN_FERROR = 0.01
MIN_LIMIT = -0.01
MAX_LIMIT = 8.0
HOME_OFFSET = 0.0

[AXIS_2]
TYPE = LINEAR
HOME = 0.0
MAX_VELOCITY = 1
MAX_ACCELERATION = 1.0
STEPGEN_MAXACCEL = 37.5
SCALE = 2250
FERROR = 0.05
MIN_FERROR = 0.01
MIN_LIMIT = -4.0
MAX_LIMIT = 0.01
HOME_OFFSET = 0.0