j@debian:~$ sudo nano /etc/apt/sources.list [sudo] hasło użytkownika j: j@debian:~$ sudo apt-get update Ign:1 cdrom://[Debian GNU/Linux 10 _Buster_ - Official Snapshot amd64 LIVE/INSTALL Binary 20220920-23:12] buster InRelease Błąd:2 cdrom://[Debian GNU/Linux 10 _Buster_ - Official Snapshot amd64 LIVE/INSTALL Binary 20220920-23:12] buster Release Proszę użyć programu apt-cdrom, aby APT mógł rozpoznać tę płytę CD. Nowych płyt nie można dodawać przy pomocy polecenia apt-get update Pobieranie:3 http://linuxcnc.org buster InRelease [28,5 kB] Pobieranie:4 http://linuxcnc.org buster/2.8-rt Sources [1 789 B] Pobieranie:5 http://linuxcnc.org buster/base Sources [6 098 B] Pobieranie:6 http://linuxcnc.org buster/base amd64 Packages [10,9 kB] Pobieranie:7 http://linuxcnc.org buster/2.8-rt amd64 Packages [8 151 B] Czytanie list pakietów... Gotowe E: The repository 'cdrom://[Debian GNU/Linux 10 _Buster_ - Official Snapshot amd64 LIVE/INSTALL Binary 20220920-23:12] buster Release' does not have a Release file. N: Updating from such a repository can't be done securely, and is therefore disabled by default. N: See apt-secure(8) manpage for repository creation and user configuration details. W: Target Packages (base/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/linuxcnc.list:1 W: Target Packages (base/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/linuxcnc.list:1 W: Target Translations (base/i18n/Translation-pl_PL) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/linuxcnc.list:1 W: Target Translations (base/i18n/Translation-pl) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/linuxcnc.list:1 W: Target Translations (base/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/linuxcnc.list:1 W: Target DEP-11 (base/dep11/Components-amd64.yml) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/linuxcnc.list:1 W: Target DEP-11 (base/dep11/Components-all.yml) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/linuxcnc.list:1 W: Target Packages (2.8-rt/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/linuxcnc.list:1 W: Target Packages (2.8-rt/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/linuxcnc.list:1 W: Target Translations (2.8-rt/i18n/Translation-pl_PL) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/linuxcnc.list:1 W: Target Translations (2.8-rt/i18n/Translation-pl) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/linuxcnc.list:1 W: Target Translations (2.8-rt/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/linuxcnc.list:1 W: Target DEP-11 (2.8-rt/dep11/Components-amd64.yml) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/linuxcnc.list:1 W: Target DEP-11 (2.8-rt/dep11/Components-all.yml) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/linuxcnc.list:1 W: Skipping acquire of configured file 'tee/source/Sources' as repository 'http://linuxcnc.org buster InRelease' doesn't have the component 'tee' (component misspelt in sources.list?) W: Skipping acquire of configured file 'sudo/source/Sources' as repository 'http://linuxcnc.org buster InRelease' doesn't have the component 'sudo' (component misspelt in sources.list?) W: Skipping acquire of configured file '/etc/apt/sources.list.d/linuxcnc.list/source/Sources' as repository 'http://linuxcnc.org buster InRelease' doesn't have the component '/etc/apt/sources.list.d/linuxcnc.list' (component misspelt in sources.list?) W: Skipping acquire of configured file '|/source/Sources' as repository 'http://linuxcnc.org buster InRelease' doesn't have the component '|' (component misspelt in sources.list?) W: Skipping acquire of configured file '-a/source/Sources' as repository 'http://linuxcnc.org buster InRelease' doesn't have the component '-a' (component misspelt in sources.list?) W: Skipping acquire of configured file '|/binary-amd64/Packages' as repository 'http://linuxcnc.org buster InRelease' doesn't have the component '|' (component misspelt in sources.list?) W: Skipping acquire of configured file '|/i18n/Translation-pl' as repository 'http://linuxcnc.org buster InRelease' doesn't have the component '|' (component misspelt in sources.list?) W: Skipping acquire of configured file '|/i18n/Translation-en' as repository 'http://linuxcnc.org buster InRelease' doesn't have the component '|' (component misspelt in sources.list?) W: Skipping acquire of configured file '|/i18n/Translation-pl_PL' as repository 'http://linuxcnc.org buster InRelease' doesn't have the component '|' (component misspelt in sources.list?) W: Skipping acquire of configured file '|/dep11/Components-amd64.yml' as repository 'http://linuxcnc.org buster InRelease' doesn't have the component '|' (component misspelt in sources.list?) W: Skipping acquire of configured file 'sudo/binary-amd64/Packages' as repository 'http://linuxcnc.org buster InRelease' doesn't have the component 'sudo' (component misspelt in sources.list?) W: Skipping acquire of configured file 'sudo/i18n/Translation-pl_PL' as repository 'http://linuxcnc.org buster InRelease' doesn't have the component 'sudo' (component misspelt in sources.list?) W: Skipping acquire of configured file 'sudo/i18n/Translation-en' as repository 'http://linuxcnc.org buster InRelease' doesn't have the component 'sudo' (component misspelt in sources.list?) W: Skipping acquire of configured file 'sudo/i18n/Translation-pl' as repository 'http://linuxcnc.org buster InRelease' doesn't have the component 'sudo' (component misspelt in sources.list?) W: Skipping acquire of configured file 'sudo/dep11/Components-amd64.yml' as repository 'http://linuxcnc.org buster InRelease' doesn't have the component 'sudo' (component misspelt in sources.list?) W: Skipping acquire of configured file 'tee/binary-amd64/Packages' as repository 'http://linuxcnc.org buster InRelease' doesn't have the component 'tee' (component misspelt in sources.list?) W: Skipping acquire of configured file 'tee/i18n/Translation-pl' as repository 'http://linuxcnc.org buster InRelease' doesn't have the component 'tee' (component misspelt in sources.list?) W: Skipping acquire of configured file 'tee/i18n/Translation-pl_PL' as repository 'http://linuxcnc.org buster InRelease' doesn't have the component 'tee' (component misspelt in sources.list?) W: Skipping acquire of configured file 'tee/i18n/Translation-en' as repository 'http://linuxcnc.org buster InRelease' doesn't have the component 'tee' (component misspelt in sources.list?) W: Skipping acquire of configured file 'tee/dep11/Components-amd64.yml' as repository 'http://linuxcnc.org buster InRelease' doesn't have the component 'tee' (component misspelt in sources.list?) W: Skipping acquire of configured file '/etc/apt/sources.list.d/linuxcnc.list/binary-amd64/Packages' as repository 'http://linuxcnc.org buster InRelease' doesn't have the component '/etc/apt/sources.list.d/linuxcnc.list' (component misspelt in sources.list?) W: Skipping acquire of configured file '/etc/apt/sources.list.d/linuxcnc.list/i18n/Translation-pl_PL' as repository 'http://linuxcnc.org buster InRelease' doesn't have the component '/etc/apt/sources.list.d/linuxcnc.list' (component misspelt in sources.list?) W: Skipping acquire of configured file '/etc/apt/sources.list.d/linuxcnc.list/i18n/Translation-en' as repository 'http://linuxcnc.org buster InRelease' doesn't have the component '/etc/apt/sources.list.d/linuxcnc.list' (component misspelt in sources.list?) W: Skipping acquire of configured file '/etc/apt/sources.list.d/linuxcnc.list/i18n/Translation-pl' as repository 'http://linuxcnc.org buster InRelease' doesn't have the component '/etc/apt/sources.list.d/linuxcnc.list' (component misspelt in sources.list?) W: Skipping acquire of configured file '/etc/apt/sources.list.d/linuxcnc.list/dep11/Components-amd64.yml' as repository 'http://linuxcnc.org buster InRelease' doesn't have the component '/etc/apt/sources.list.d/linuxcnc.list' (component misspelt in sources.list?) W: Target Packages (base/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/linuxcnc.list:1 W: Target Packages (base/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/linuxcnc.list:1 W: Target Translations (base/i18n/Translation-pl_PL) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/linuxcnc.list:1 W: Target Translations (base/i18n/Translation-pl) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/linuxcnc.list:1 W: Target Translations (base/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/linuxcnc.list:1 W: Target DEP-11 (base/dep11/Components-amd64.yml) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/linuxcnc.list:1 W: Target DEP-11 (base/dep11/Components-all.yml) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/linuxcnc.list:1 W: Target Packages (2.8-rt/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/linuxcnc.list:1 W: Target Packages (2.8-rt/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/linuxcnc.list:1 W: Target Translations (2.8-rt/i18n/Translation-pl_PL) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/linuxcnc.list:1 W: Target Translations (2.8-rt/i18n/Translation-pl) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/linuxcnc.list:1 W: Target Translations (2.8-rt/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/linuxcnc.list:1 W: Target DEP-11 (2.8-rt/dep11/Components-amd64.yml) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/linuxcnc.list:1 W: Target DEP-11 (2.8-rt/dep11/Components-all.yml) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/linuxcnc.list:1 j@debian:~$ sudo apt-get install linuxcnc Czytanie list pakietów... Gotowe Budowanie drzewa zależności Odczyt informacji o stanie... Gotowe Następujące pakiety zostały zainstalowane automatycznie i nie są już więcej wymagane: libudev-dev python-serial python-yapps Aby je usunąć należy użyć "sudo apt autoremove". The following additional packages will be installed: linux-image-4.19.195-rtai-amd64 rtai-modules-4.19.195 Następujące pakiety zostaną USUNIĘTE: linuxcnc-uspace linuxcnc-uspace-dev Zostaną zainstalowane następujące NOWE pakiety: linux-image-4.19.195-rtai-amd64 linuxcnc rtai-modules-4.19.195 0 aktualizowanych, 3 nowo instalowanych, 2 usuwanych i 1 nieaktualizowanych. Konieczne pobranie 47,5 MB archiwów. Po tej operacji zostanie dodatkowo użyte 152 MB miejsca na dysku. Kontynuować? [T/n] t Pobieranie:1 http://linuxcnc.org buster/base amd64 linux-image-4.19.195-rtai-amd64 amd64 4.19.195-rtai-amd64-5 [34,5 MB] Pobieranie:2 http://linuxcnc.org buster/base amd64 rtai-modules-4.19.195 amd64 5.3.1-linuxcnc [168 kB] Pobieranie:3 http://linuxcnc.org buster/2.8-rt amd64 linuxcnc amd64 1:2.8.4 [12,8 MB] Pobrano 47,5 MB w 2min 22s (335 kB/s) (Odczytywanie bazy danych ... 121629 plików i katalogów obecnie zainstalowanych.) Usuwanie pakietu linuxcnc-uspace-dev (1:2.8.4.1.gb7824717b) ... Usuwanie pakietu linuxcnc-uspace (1:2.8.4.1.gb7824717b) ... Wybieranie wcześniej niewybranego pakietu linux-image-4.19.195-rtai-amd64. (Odczytywanie bazy danych ... 117263 pliki i katalogi obecnie zainstalowane.) Przygotowywanie do rozpakowania pakietu .../linux-image-4.19.195-rtai-amd64_4.19.195-rtai-amd64-5_amd64.deb ... Rozpakowywanie pakietu linux-image-4.19.195-rtai-amd64 (4.19.195-rtai-amd64-5) ... Wybieranie wcześniej niewybranego pakietu rtai-modules-4.19.195. Przygotowywanie do rozpakowania pakietu .../rtai-modules-4.19.195_5.3.1-linuxcnc_amd64.deb ... Rozpakowywanie pakietu rtai-modules-4.19.195 (5.3.1-linuxcnc) ... Wybieranie wcześniej niewybranego pakietu linuxcnc. Przygotowywanie do rozpakowania pakietu .../linuxcnc_1%3a2.8.4_amd64.deb ... Rozpakowywanie pakietu linuxcnc (1:2.8.4) ... Konfigurowanie pakietu linux-image-4.19.195-rtai-amd64 (4.19.195-rtai-amd64-5) ... update-initramfs: Generating /boot/initrd.img-4.19.195-rtai-amd64 Generating grub configuration file ... Found background image: /usr/share/images/desktop-base/desktop-grub.png Found linux image: /boot/vmlinuz-4.19.195-rtai-amd64 Found initrd image: /boot/initrd.img-4.19.195-rtai-amd64 Found linux image: /boot/vmlinuz-4.19.0-21-rt-amd64 Found initrd image: /boot/initrd.img-4.19.0-21-rt-amd64 done Konfigurowanie pakietu rtai-modules-4.19.195 (5.3.1-linuxcnc) ... Konfigurowanie pakietu linuxcnc (1:2.8.4) ... Instalowanie nowej wersji pliku konfiguracyjnego /etc/init.d/realtime ... Instalowanie nowej wersji pliku konfiguracyjnego /etc/linuxcnc/rtapi.conf ... Przetwarzanie wyzwalaczy pakietu shared-mime-info (1.10-1)... Przetwarzanie wyzwalaczy pakietu desktop-file-utils (0.23-4)... Przetwarzanie wyzwalaczy pakietu mime-support (3.62)... Przetwarzanie wyzwalaczy pakietu hicolor-icon-theme (0.17-2)... Przetwarzanie wyzwalaczy pakietu libc-bin (2.28-10+deb10u1)... Przetwarzanie wyzwalaczy pakietu systemd (241-7~deb10u8)... Przetwarzanie wyzwalaczy pakietu man-db (2.8.5-2)... j@debian:~$