Print file information: RUN_IN_PLACE=no LINUXCNC_DIR= LINUXCNC_BIN_DIR=/usr/bin LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc LINUXCNC_SCRIPT_DIR= LINUXCNC_RTLIB_DIR=/usr/lib/linuxcnc/modules LINUXCNC_CONFIG_DIR= LINUXCNC_LANG_DIR=/usr/lib/tcltk/linuxcnc/msgs INIVAR=inivar HALCMD=halcmd LINUXCNC_EMCSH=/usr/bin/wish8.6 LINUXCNC - 2.9.8 Machine configuration directory is '/home/cncmrue/linuxcnc/configs/BridgeportCNC-1' Machine configuration file is 'BridgeportCNC-1.ini' INIFILE=/home/cncmrue/linuxcnc/configs/BridgeportCNC-1/BridgeportCNC-1.ini VERSION=1.1 PARAMETER_FILE=linuxcnc.var TPMOD= HOMEMOD= TASK=milltask HALUI=halui DISPLAY=gmoccapy #axis COORDINATES=XYZ KINEMATICS=trivkins coordinates=XYZ Starting LinuxCNC... Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Starting LinuxCNC IO program: io Starting HAL User Interface program: halui linuxcnc TPMOD=tpmod HOMEMOD=homemod EMCMOT=motmod Found file(REL): ./BridgeportCNC-1.hal Found file(REL): ./custom.hal Found file(REL): ./vc-p4s.hal Starting TASK program: milltask Starting DISPLAY program: gmoccapy emcPositionLoad: failed to load joint 9 position from position.txt, ignoring task: main loop took 0.124944 seconds No option 'kbd_height' in section: 'DEFAULT' No option 'kbd_width' in section: 'DEFAULT' No option 'kbd_set_height' in section: 'DEFAULT' No option 'kbd_set_width' in section: 'DEFAULT' No option 'hide_titlebar' in section: 'DEFAULT' No option 'icon_theme' in section: 'DEFAULT' No option 'gcode_theme' in section: 'DEFAULT' No option 'audio_enabled' in section: 'DEFAULT' No option 'audio_alert' in section: 'DEFAULT' No option 'audio_error' in section: 'DEFAULT' Shutting down and cleaning up LinuxCNC... Running HAL shutdown script task: 258 cycles, min=0.000008, max=0.124944, avg=0.009442, 1 latency excursions (> 10x expected cycle time of 0.010000s) hm2: loading Mesa HostMot2 driver version 0.15 hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.2 hm2_eth: 10.10.10.10: INFO: Hardware address (MAC): 00:60:1b:10:4c:ca hm2_eth: discovered 7I76E-16 hm2/hm2_7i76e.0: Low Level init 0.15 hm2/hm2_7i76e.0: Smart Serial Firmware Version 43 Board hm2_7i76e.0.7i76.0.0 Hardware Mode 0 = standard Board hm2_7i76e.0.7i76.0.0 Software Mode 0 = io_spin Board hm2_7i76e.0.7i76.0.0 Software Mode 1 = io_ana_spin Board hm2_7i76e.0.7i76.0.0 Software Mode 2 = io_enc_ana_spin_fv hm2/hm2_7i76e.0: 51 I/O Pins used: hm2/hm2_7i76e.0: IO Pin 000 (P1-01): StepGen #0, pin Direction (Output) hm2/hm2_7i76e.0: IO Pin 001 (P1-14): StepGen #0, pin Step (Output) hm2/hm2_7i76e.0: IO Pin 002 (P1-02): StepGen #1, pin Direction (Output) hm2/hm2_7i76e.0: IO Pin 003 (P1-15): StepGen #1, pin Step (Output) hm2/hm2_7i76e.0: IO Pin 004 (P1-03): StepGen #2, pin Direction (Output) hm2/hm2_7i76e.0: IO Pin 005 (P1-16): StepGen #2, pin Step (Output) hm2/hm2_7i76e.0: IO Pin 006 (P1-04): StepGen #3, pin Direction (Output) hm2/hm2_7i76e.0: IO Pin 007 (P1-17): StepGen #3, pin Step (Output) hm2/hm2_7i76e.0: IO Pin 008 (P1-05): StepGen #4, pin Direction (Output) hm2/hm2_7i76e.0: IO Pin 009 (P1-06): StepGen #4, pin Step (Output) hm2/hm2_7i76e.0: IO Pin 010 (P1-07): Smart Serial Interface #0, pin tx0 (Output) hm2/hm2_7i76e.0: IO Pin 011 (P1-08): Smart Serial Interface #0, pin rx0 (Input) hm2/hm2_7i76e.0: IO Pin 012 (P1-09): IOPort hm2/hm2_7i76e.0: IO Pin 013 (P1-10): IOPort hm2/hm2_7i76e.0: IO Pin 014 (P1-11): Muxed Encoder #2, pin Muxed Index (Input) hm2/hm2_7i76e.0: IO Pin 015 (P1-12): Muxed Encoder #2, pin Muxed B (Input) hm2/hm2_7i76e.0: IO Pin 016 (P1-13): Muxed Encoder #2, pin Muxed A (Input) hm2/hm2_7i76e.0: IO Pin 017 (P2-01): IOPort hm2/hm2_7i76e.0: IO Pin 018 (P2-14): IOPort hm2/hm2_7i76e.0: IO Pin 019 (P2-02): StepGen #8, pin Step (Output) hm2/hm2_7i76e.0: IO Pin 020 (P2-15): StepGen #8, pin Direction (Output) hm2/hm2_7i76e.0: IO Pin 021 (P2-03): StepGen #7, pin Step (Output) hm2/hm2_7i76e.0: IO Pin 022 (P2-16): StepGen #7, pin Direction (Output) hm2/hm2_7i76e.0: IO Pin 023 (P2-04): StepGen #6, pin Step (Output) hm2/hm2_7i76e.0: IO Pin 024 (P2-17): StepGen #6, pin Direction (Output) hm2/hm2_7i76e.0: IO Pin 025 (P2-05): StepGen #5, pin Step (Output) hm2/hm2_7i76e.0: IO Pin 026 (P2-06): StepGen #5, pin Direction (Output) hm2/hm2_7i76e.0: IO Pin 027 (P2-07): Muxed Encoder Select #0, pin Mux Select 0 (Output) hm2/hm2_7i76e.0: IO Pin 028 (P2-08): Muxed Encoder #0, pin Muxed A (Input) hm2/hm2_7i76e.0: IO Pin 029 (P2-09): Muxed Encoder #0, pin Muxed B (Input) hm2/hm2_7i76e.0: IO Pin 030 (P2-10): Muxed Encoder #0, pin Muxed Index (Input) hm2/hm2_7i76e.0: IO Pin 031 (P2-11): Muxed Encoder #1, pin Muxed A (Input) hm2/hm2_7i76e.0: IO Pin 032 (P2-12): Muxed Encoder #1, pin Muxed B (Input) hm2/hm2_7i76e.0: IO Pin 033 (P2-13): Muxed Encoder #1, pin Muxed Index (Input) hm2/hm2_7i76e.0: IO Pin 034 (P3-01): IOPort hm2/hm2_7i76e.0: IO Pin 035 (P3-14): IOPort hm2/hm2_7i76e.0: IO Pin 036 (P3-02): IOPort hm2/hm2_7i76e.0: IO Pin 037 (P3-15): IOPort hm2/hm2_7i76e.0: IO Pin 038 (P3-03): IOPort hm2/hm2_7i76e.0: IO Pin 039 (P3-16): IOPort hm2/hm2_7i76e.0: IO Pin 040 (P3-04): IOPort hm2/hm2_7i76e.0: IO Pin 041 (P3-17): IOPort hm2/hm2_7i76e.0: IO Pin 042 (P3-05): IOPort hm2/hm2_7i76e.0: IO Pin 043 (P3-06): IOPort hm2/hm2_7i76e.0: IO Pin 044 (P3-07): IOPort hm2/hm2_7i76e.0: IO Pin 045 (P3-08): IOPort hm2/hm2_7i76e.0: IO Pin 046 (P3-09): IOPort hm2/hm2_7i76e.0: IO Pin 047 (P3-10): IOPort hm2/hm2_7i76e.0: IO Pin 048 (P3-11): IOPort hm2/hm2_7i76e.0: IO Pin 049 (P3-12): IOPort hm2/hm2_7i76e.0: IO Pin 050 (P3-13): IOPort hm2/hm2_7i76e.0: registered hm2_eth: in hm2_eth_reset hm2_eth: HostMot2 ethernet driver unloaded hm2: unloading Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments Debug file information: Note: Using POSIX realtime [Gmoccapy.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No DEFAULT_SPINDLE_0_SPEED Entry in DISPLAY, Using: 200 (qt_istat.py:532) [Gmoccapy.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MIN_SPINDLE_0_SPEED Entry in DISPLAY, Using: 100 (qt_istat.py:532) [Gmoccapy.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MAX_SPINDLE_0_SPEED Entry in DISPLAY, Using: 2500 (qt_istat.py:532) [Gmoccapy.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MAX_SPINDLE_0_OVERRIDE Entry in DISPLAY, Using: 1 (qt_istat.py:532) [Gmoccapy.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MIN_SPINDLE_0_OVERRIDE Entry in DISPLAY, Using: 0.5 (qt_istat.py:532) (gmoccapy:6841): Gtk-CRITICAL **: 23:29:05.518: gtk_entry_set_text: assertion 'text != NULL' failed [Gmoccapy.GMOCCAPY.GETINIINFO][WARNING] No DEFAULT_SPINDLE_SPEED entry found in [DISPLAY] of INI file (getiniinfo.py:282) [Gmoccapy][ERROR] g-file-error-quark: Datei »/home/cncmrue/linuxcnc/configs/BridgeportCNC-1/macros/images/i_am_lost.png« konnte nicht geöffnet werden: Datei oder Verzeichnis nicht gefunden (4) (gmoccapy:804) [Gmoccapy][ERROR] could not resolve the image path '/home/cncmrue/linuxcnc/configs/BridgeportCNC-1/macros/images/i_am_lost.png' given for button 'macro_1' (gmoccapy:806) [Gmoccapy][ERROR] g-file-error-quark: Datei »/home/cncmrue/linuxcnc/configs/BridgeportCNC-1/macros/images/goto_x_y_z.png« konnte nicht geöffnet werden: Datei oder Verzeichnis nicht gefunden (4) (gmoccapy:804) [Gmoccapy][ERROR] could not resolve the image path '/home/cncmrue/linuxcnc/configs/BridgeportCNC-1/macros/images/goto_x_y_z.png' given for button 'macro_4' (gmoccapy:806) /usr/lib/python3/dist-packages/Onboard/LayoutLoaderSVG.py:447: SyntaxWarning: 'str' object is not callable; perhaps you missed a comma? raise Exceptions.LayoutFileError("Unrecognized modifier %s in" \ [Gmoccapy.GMOCCAPY.GETINIINFO][WARNING] Wrong entry [DISPLAY] CYCLE_TIME in INI File! Will use gmoccapy default 150 (getiniinfo.py:56) vc-postgui.hal:5: Pin 'ini.3.max_velocity' does not exist /usr/lib/python3/dist-packages/gi/overrides/GObject.py:493: Warning: ../../../gobject/gsignal.c:2772: instance '0x71cf960' has no handler with id '37748758' return func(*args, **kwargs) 6783 6837 Stopping realtime threads Unloading hal components Note: Using POSIX realtime