# Include your custom HAL commands here
# This file will not be overwritten when you run PNCconf again

# ---COMMON PLASMAC DEBOUNCE---
# for the float and ohmic inputs each increment in delay is
# is a 0.001mm (0.00004") increase in any probed height result
setp db_float.delay     5
setp db_ohmic.delay     5
setp db_breakaway.delay 5
setp db_arc-ok.delay    5

# ---ARC VOLTAGE LOWPASS FILTER---
# Only use this if comprehensive testing shows that it is required
#setp plasmac.lowpass-frequency 0


# --- LASER ---
net plasmac:laser-switch =>  hm2_7i96.0.ssr.00.out-01