[ 0.845789] iommu: Adding device 0000:00:01.0 to group 0 [ 0.845996] iommu: Adding device 0000:00:01.1 to group 1 [ 0.846183] iommu: Adding device 0000:00:01.3 to group 2 [ 0.846391] iommu: Adding device 0000:00:02.0 to group 3 [ 0.846575] iommu: Adding device 0000:00:03.0 to group 4 [ 0.846784] iommu: Adding device 0000:00:03.1 to group 5 [ 0.846965] iommu: Adding device 0000:00:04.0 to group 6 [ 0.847172] iommu: Adding device 0000:00:07.0 to group 7 [ 0.847353] iommu: Adding device 0000:00:07.1 to group 8 [ 0.847564] iommu: Adding device 0000:00:08.0 to group 9 [ 0.847766] iommu: Adding device 0000:00:08.1 to group 10 [ 0.847977] iommu: Adding device 0000:00:14.0 to group 11 [ 0.847993] iommu: Adding device 0000:00:14.3 to group 11 [ 0.848199] iommu: Adding device 0000:00:18.0 to group 12 [ 0.848216] iommu: Adding device 0000:00:18.1 to group 12 [ 0.848231] iommu: Adding device 0000:00:18.2 to group 12 [ 0.848247] iommu: Adding device 0000:00:18.3 to group 12 [ 0.848262] iommu: Adding device 0000:00:18.4 to group 12 [ 0.848279] iommu: Adding device 0000:00:18.5 to group 12 [ 0.848296] iommu: Adding device 0000:00:18.6 to group 12 [ 0.848311] iommu: Adding device 0000:00:18.7 to group 12 [ 0.848521] iommu: Adding device 0000:01:00.0 to group 13 [ 0.848720] iommu: Adding device 0000:02:00.0 to group 14 [ 0.848745] iommu: Adding device 0000:02:00.1 to group 14 [ 0.848768] iommu: Adding device 0000:02:00.2 to group 14 [ 0.848781] iommu: Adding device 0000:03:00.0 to group 14 [ 0.848792] iommu: Adding device 0000:03:04.0 to group 14 [ 0.848805] iommu: Adding device 0000:03:05.0 to group 14 [ 0.848817] iommu: Adding device 0000:03:06.0 to group 14 [ 0.848828] iommu: Adding device 0000:03:07.0 to group 14 [ 0.848849] iommu: Adding device 0000:08:00.0 to group 14 [ 0.849056] iommu: Adding device 0000:09:00.0 to group 15 [ 0.849260] iommu: Adding device 0000:0a:00.0 to group 16 [ 0.849494] iommu: Adding device 0000:0b:00.0 to group 17 [ 0.849561] iommu: Using direct mapping for device 0000:0b:00.0 [ 0.849641] iommu: Adding device 0000:0b:00.1 to group 18 [ 0.849813] iommu: Adding device 0000:0c:00.0 to group 19 [ 0.849994] iommu: Adding device 0000:0c:00.2 to group 20 [ 0.850203] iommu: Adding device 0000:0c:00.3 to group 21 [ 0.850384] iommu: Adding device 0000:0d:00.0 to group 22 [ 0.850591] iommu: Adding device 0000:0d:00.2 to group 23 [ 0.850779] iommu: Adding device 0000:0d:00.3 to group 24 [ 0.851060] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40 [ 0.851061] AMD-Vi: Extended features (0xf77ef22294ada): [ 0.851061] PPR NX GT IA GA PC GA_vAPIC [ 0.851063] AMD-Vi: Interrupt remapping enabled [ 0.851064] AMD-Vi: virtual APIC enabled [ 0.851201] AMD-Vi: Lazy IO/TLB flushing enabled [ 0.853406] amd_uncore: AMD NB counters detected [ 0.853414] amd_uncore: AMD LLC counters detected [ 0.853675] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank). [ 0.854358] Initialise system trusted keyrings [ 0.854371] Key type blacklist registered [ 0.854406] workingset: timestamp_bits=40 max_order=22 bucket_order=0 [ 0.855393] zbud: loaded [ 0.942234] Key type asymmetric registered [ 0.942236] Asymmetric key parser 'x509' registered [ 0.942244] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.942273] io scheduler noop registered [ 0.942273] io scheduler deadline registered [ 0.942296] io scheduler cfq registered (default) [ 0.942296] io scheduler mq-deadline registered [ 0.942774] pcieport 0000:00:01.1: AER enabled with IRQ 26 [ 0.943762] pcieport 0000:00:01.3: AER enabled with IRQ 27 [ 0.944677] pcieport 0000:00:03.1: AER enabled with IRQ 28 [ 0.947713] pcieport 0000:00:07.1: AER enabled with IRQ 29 [ 0.950723] pcieport 0000:00:08.1: AER enabled with IRQ 31 [ 0.952559] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.952569] efifb: probing for efifb [ 0.952575] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k [ 0.952576] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 0.952576] efifb: scrolling: redraw [ 0.952577] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.953734] Console: switching to colour frame buffer device 128x48 [ 0.954803] fb0: EFI VGA frame buffer device [ 0.954841] Monitor-Mwait will be used to enter C-1 state [ 0.956194] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.977077] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.977392] Linux agpgart interface v0.103 [ 0.977658] AMD IOMMUv2 driver by Joerg Roedel [ 0.978683] i8042: PNP: No PS/2 controller found. [ 0.978730] mousedev: PS/2 mouse device common for all mice [ 0.978764] rtc_cmos 00:01: RTC can wake from S4 [ 0.979025] rtc_cmos 00:01: registered as rtc0 [ 0.979036] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.979319] NET: Registered protocol family 10 [ 0.983807] Segment Routing with IPv6 [ 0.983819] mip6: Mobile IPv6 [ 0.983821] NET: Registered protocol family 17 [ 0.983850] mpls_gso: MPLS GSO support [ 0.984618] mce: Using 23 MCE banks [ 0.984652] microcode: CPU0: patch_level=0x0800820d [ 0.984657] microcode: CPU1: patch_level=0x0800820d [ 0.984663] microcode: CPU2: patch_level=0x0800820d [ 0.984666] microcode: CPU3: patch_level=0x0800820d [ 0.984672] microcode: CPU4: patch_level=0x0800820d [ 0.984679] microcode: CPU5: patch_level=0x0800820d [ 0.984685] microcode: CPU6: patch_level=0x0800820d [ 0.984692] microcode: CPU7: patch_level=0x0800820d [ 0.984697] microcode: CPU8: patch_level=0x0800820d [ 0.984701] microcode: CPU9: patch_level=0x0800820d [ 0.984705] microcode: CPU10: patch_level=0x0800820d [ 0.984710] microcode: CPU11: patch_level=0x0800820d [ 0.984715] microcode: CPU12: patch_level=0x0800820d [ 0.984722] microcode: CPU13: patch_level=0x0800820d [ 0.984728] microcode: CPU14: patch_level=0x0800820d [ 0.984733] microcode: CPU15: patch_level=0x0800820d [ 0.984765] microcode: Microcode Update Driver: v2.2. [ 0.984773] sched_clock: Marking stable (1012753946, -27992715)->(990663911, -5902680) [ 0.985155] registered taskstats version 1 [ 0.985162] Loading compiled-in X.509 certificates [ 1.005221] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 1.005232] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9' [ 1.005253] zswap: loaded using pool lzo/zbud [ 1.005593] AppArmor: AppArmor sha1 policy hashing enabled [ 1.005986] rtc_cmos 00:01: setting system clock to 2021-03-08 17:52:25 UTC (1615225945) [ 1.205366] Freeing unused kernel image memory: 1548K [ 1.205368] Write protecting the kernel read-only data: 16384k [ 1.207274] Freeing unused kernel image memory: 2032K [ 1.207431] Freeing unused kernel image memory: 764K [ 1.212708] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.212710] Run /init as init process [ 1.267911] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.268184] ACPI: Power Button [PWRB] [ 1.268689] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.283747] r8168: loading out-of-tree module taints kernel. [ 1.283930] r8168: module verification failed: signature and/or required key missing - tainting kernel [ 1.284045] ACPI: Power Button [PWRF] [ 1.285321] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 1.287476] r8168 Gigabit Ethernet driver 8.046.00-NAPI loaded [ 1.293574] SCSI subsystem initialized [ 1.294356] ACPI: bus type USB registered [ 1.294802] usbcore: registered new interface driver usbfs [ 1.294852] nvme nvme0: pci function 0000:01:00.0 [ 1.294924] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 1.294926] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection [ 1.295093] usbcore: registered new interface driver hub [ 1.295376] usbcore: registered new device driver usb [ 1.297457] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 1.305925] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 1.305930] r8168 Copyright (C) 2018 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 1.309539] cryptd: max_cpu_qlen set to 1000 [ 1.314968] libata version 3.00 loaded. [ 1.315823] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 1.318644] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1 [ 1.324733] AVX2 version of gcm_enc/dec engaged. [ 1.324735] AES CTR mode by8 optimization enabled [ 1.326430] r8168 0000:08:00.0 enp8s0: renamed from eth0 [ 1.326766] ahci 0000:02:00.1: version 3.0 [ 1.327169] ahci 0000:02:00.1: SSS flag set, parallel bus scan disabled [ 1.327203] ahci 0000:02:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode [ 1.327206] ahci 0000:02:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst [ 1.339984] scsi host0: ahci [ 1.341061] scsi host1: ahci [ 1.341161] scsi host2: ahci [ 1.341257] scsi host3: ahci [ 1.341342] scsi host4: ahci [ 1.341439] scsi host5: ahci [ 1.341534] scsi host6: ahci [ 1.341644] scsi host7: ahci [ 1.341703] ata1: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80100 irq 47 [ 1.341705] ata2: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80180 irq 47 [ 1.341706] ata3: DUMMY [ 1.341707] ata4: DUMMY [ 1.341709] ata5: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80300 irq 47 [ 1.341711] ata6: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80380 irq 47 [ 1.341712] ata7: DUMMY [ 1.341713] ata8: DUMMY [ 1.341974] ahci 0000:0d:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 1.341977] ahci 0000:0d:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part [ 1.342138] scsi host8: ahci [ 1.342195] ata9: SATA max UDMA/133 abar m4096@0xfce08000 port 0xfce08100 irq 49 [ 1.373964] xhci_hcd 0000:02:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410 [ 1.374513] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.374514] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.374515] usb usb1: Product: xHCI Host Controller [ 1.374516] usb usb1: Manufacturer: Linux 4.19.0-14-rt-amd64 xhci-hcd [ 1.374517] usb usb1: SerialNumber: 0000:02:00.0 [ 1.374622] hub 1-0:1.0: USB hub found [ 1.374634] hub 1-0:1.0: 10 ports detected [ 1.380894] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 1.380897] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2 [ 1.380899] xhci_hcd 0000:02:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 1.380943] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.380958] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 1.380959] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.380960] usb usb2: Product: xHCI Host Controller [ 1.380961] usb usb2: Manufacturer: Linux 4.19.0-14-rt-amd64 xhci-hcd [ 1.380961] usb usb2: SerialNumber: 0000:02:00.0 [ 1.381031] hub 2-0:1.0: USB hub found [ 1.381038] hub 2-0:1.0: 4 ports detected [ 1.383596] xhci_hcd 0000:0c:00.3: xHCI Host Controller [ 1.383599] xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 3 [ 1.383692] xhci_hcd 0000:0c:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x0000000000000410 [ 1.384137] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.384138] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.384139] usb usb3: Product: xHCI Host Controller [ 1.384139] usb usb3: Manufacturer: Linux 4.19.0-14-rt-amd64 xhci-hcd [ 1.384140] usb usb3: SerialNumber: 0000:0c:00.3 [ 1.384220] hub 3-0:1.0: USB hub found [ 1.384226] hub 3-0:1.0: 4 ports detected [ 1.384378] xhci_hcd 0000:0c:00.3: xHCI Host Controller [ 1.384380] xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 4 [ 1.384382] xhci_hcd 0000:0c:00.3: Host supports USB 3.0 SuperSpeed [ 1.384394] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.384417] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 1.384417] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.384418] usb usb4: Product: xHCI Host Controller [ 1.384419] usb usb4: Manufacturer: Linux 4.19.0-14-rt-amd64 xhci-hcd [ 1.384419] usb usb4: SerialNumber: 0000:0c:00.3 [ 1.384484] hub 4-0:1.0: USB hub found [ 1.384490] hub 4-0:1.0: 4 ports detected [ 1.416578] [drm] amdgpu kernel modesetting enabled. [ 1.423403] Parsing CRAT table with 1 nodes [ 1.423407] Ignoring ACPI CRAT on non-APU system [ 1.423409] Virtual CRAT table created for CPU [ 1.423409] Parsing CRAT table with 1 nodes [ 1.423410] Creating topology SYSFS entries [ 1.423435] Topology: Add CPU node [ 1.423436] Finished initializing topology [ 1.423482] kfd kfd: Initialized module [ 1.423630] checking generic (e0000000 300000) vs hw (e0000000 10000000) [ 1.423631] fb: switching to amdgpudrmfb from EFI VGA [ 1.423649] Console: switching to colour dummy device 80x25 [ 1.423896] [drm] initializing kernel modesetting (VEGA10 0x1002:0x687F 0x1849:0x1001 0xC3). [ 1.423909] [drm] register mmio base: 0xFCA00000 [ 1.423910] [drm] register mmio size: 524288 [ 1.423917] [drm] add ip block number 0 [ 1.423918] [drm] add ip block number 1 [ 1.423918] [drm] add ip block number 2 [ 1.423919] [drm] add ip block number 3 [ 1.423919] [drm] add ip block number 4 [ 1.423920] [drm] add ip block number 5 [ 1.423920] [drm] add ip block number 6 [ 1.423920] [drm] add ip block number 7 [ 1.423921] [drm] add ip block number 8 [ 1.423921] [drm] add ip block number 9 [ 1.423941] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_gpu_info.bin [ 1.423951] [drm] UVD(0) is enabled in VM mode [ 1.423951] [drm] UVD(0) ENC is enabled in VM mode [ 1.423952] [drm] VCE enabled in VM mode [ 1.423966] amdgpu 0000:0b:00.0: No more image in the PCI ROM [ 1.423983] ATOM BIOS: 113-TIC46561-001 [ 1.424000] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit [ 1.424005] amdgpu 0000:0b:00.0: VRAM: 8176M 0x000000F400000000 - 0x000000F5FEFFFFFF (8176M used) [ 1.424006] amdgpu 0000:0b:00.0: GART: 512M 0x000000F600000000 - 0x000000F61FFFFFFF [ 1.424030] [drm] Detected VRAM RAM=8176M, BAR=256M [ 1.424031] [drm] RAM width 2048bits HBM [ 1.424080] [TTM] Zone kernel: Available graphics memory: 8208974 kiB [ 1.424080] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 1.424081] [TTM] Initializing pool allocator [ 1.424084] [TTM] Initializing DMA pool allocator [ 1.424106] [drm] amdgpu: 8176M of VRAM memory ready [ 1.424107] [drm] amdgpu: 8176M of GTT memory ready. [ 1.424114] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 1.424221] [drm] PCIE GART of 512M enabled (table at 0x000000F400900000). [ 1.424371] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_sos.bin [ 1.424391] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_asd.bin [ 1.424448] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_acg_smc.bin [ 1.424472] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_pfp.bin [ 1.424484] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_me.bin [ 1.424495] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_ce.bin [ 1.424506] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_rlc.bin [ 1.424563] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_mec.bin [ 1.424622] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_mec2.bin [ 1.425297] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_sdma.bin [ 1.425310] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_sdma1.bin [ 1.425311] [drm] use_doorbell being set to: [true] [ 1.425341] [drm] use_doorbell being set to: [true] [ 1.425454] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_uvd.bin [ 1.425456] [drm] Found UVD firmware Version: 1.87 Family ID: 17 [ 1.425458] [drm] PSP loading UVD firmware [ 1.425971] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_vce.bin [ 1.425973] [drm] Found VCE firmware Version: 55.3 Binary ID: 4 [ 1.425976] [drm] PSP loading VCE firmware [ 1.508683] nvme nvme0: Shutdown timeout set to 8 seconds [ 1.545164] nvme0n1: p1 p2 p3 p4 [ 1.658267] ata9: SATA link down (SStatus 0 SControl 300) [ 1.720015] usb 1-6: new low-speed USB device number 2 using xhci_hcd [ 1.724532] usb 3-4: new full-speed USB device number 2 using xhci_hcd [ 1.769895] amdgpu: [powerplay] GPU over temperature range detected on PCIe 0:0.0! [ 1.792591] [drm] Display Core initialized with v3.1.59! [ 1.816664] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.817695] ata1.00: ATA-8: ST1000DM010-2EP102, CC43, max UDMA/133 [ 1.817696] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.817896] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.817897] [drm] Driver supports precise vblank timestamp query. [ 1.818736] ata1.00: configured for UDMA/133 [ 1.818863] scsi 0:0:0:0: Direct-Access ATA ST1000DM010-2EP1 CC43 PQ: 0 ANSI: 5 [ 1.821502] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.821503] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.821507] sd 0:0:0:0: [sda] Write Protect is off [ 1.821508] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.821512] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.840951] [drm] UVD and UVD ENC initialized successfully. [ 1.856022] sda: sda1 sda2 sda3 [ 1.856419] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.860695] tsc: Refined TSC clocksource calibration: 3693.062 MHz [ 1.860710] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a7777116fa, max_idle_ns: 881590883556 ns [ 1.860768] clocksource: Switched to clocksource tsc [ 1.907495] usb 3-4: New USB device found, idVendor=046d, idProduct=c52e, bcdDevice=15.00 [ 1.907497] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.907498] usb 3-4: Product: USB Receiver [ 1.907499] usb 3-4: Manufacturer: Logitech [ 1.938793] hidraw: raw HID events driver (C) Jiri Kosina [ 1.940647] [drm] VCE initialized successfully. [ 1.941800] kfd kfd: Allocated 3969056 bytes on gart [ 1.941814] Virtual CRAT table created for GPU [ 1.941815] Parsing CRAT table with 1 nodes [ 1.941825] Creating topology SYSFS entries [ 1.941915] Topology: Add dGPU node [0x687f:0x1002] [ 1.941958] kfd kfd: added device 1002:687f [ 1.942951] [drm] fb mappable at 0xE1000000 [ 1.942952] [drm] vram apper at 0xE0000000 [ 1.942952] [drm] size 8294400 [ 1.942953] [drm] fb depth is 24 [ 1.942953] [drm] pitch is 7680 [ 1.942992] fbcon: amdgpudrmfb (fb0) is primary device [ 1.971978] Console: switching to colour frame buffer device 240x67 [ 1.976172] usb 1-6: New USB device found, idVendor=1241, idProduct=1111, bcdDevice= 1.00 [ 1.976174] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.977721] usbcore: registered new interface driver usbhid [ 1.977721] usbhid: USB HID core driver [ 1.978877] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:07.1/0000:0c:00.3/usb3/3-4/3-4:1.0/0003:046D:C52E.0001/input/input2 [ 1.990726] amdgpu 0000:0b:00.0: fb0: amdgpudrmfb frame buffer device [ 1.998548] input: HID 1241:1111 as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-6/1-6:1.0/0003:1241:1111.0003/input/input3 [ 2.032659] amdgpu 0000:0b:00.0: ring 0(gfx) uses VM inv eng 4 on hub 0 [ 2.032660] amdgpu 0000:0b:00.0: ring 1(comp_1.0.0) uses VM inv eng 5 on hub 0 [ 2.032662] amdgpu 0000:0b:00.0: ring 2(comp_1.1.0) uses VM inv eng 6 on hub 0 [ 2.032663] amdgpu 0000:0b:00.0: ring 3(comp_1.2.0) uses VM inv eng 7 on hub 0 [ 2.032664] amdgpu 0000:0b:00.0: ring 4(comp_1.3.0) uses VM inv eng 8 on hub 0 [ 2.032665] amdgpu 0000:0b:00.0: ring 5(comp_1.0.1) uses VM inv eng 9 on hub 0 [ 2.032666] amdgpu 0000:0b:00.0: ring 6(comp_1.1.1) uses VM inv eng 10 on hub 0 [ 2.032667] amdgpu 0000:0b:00.0: ring 7(comp_1.2.1) uses VM inv eng 11 on hub 0 [ 2.032668] amdgpu 0000:0b:00.0: ring 8(comp_1.3.1) uses VM inv eng 12 on hub 0 [ 2.032669] amdgpu 0000:0b:00.0: ring 9(kiq_2.1.0) uses VM inv eng 13 on hub 0 [ 2.032670] amdgpu 0000:0b:00.0: ring 10(sdma0) uses VM inv eng 4 on hub 1 [ 2.032671] amdgpu 0000:0b:00.0: ring 11(sdma1) uses VM inv eng 5 on hub 1 [ 2.032672] amdgpu 0000:0b:00.0: ring 12(uvd<0>) uses VM inv eng 6 on hub 1 [ 2.032673] amdgpu 0000:0b:00.0: ring 13(uvd_enc0<0>) uses VM inv eng 7 on hub 1 [ 2.032674] amdgpu 0000:0b:00.0: ring 14(uvd_enc1<0>) uses VM inv eng 8 on hub 1 [ 2.032675] amdgpu 0000:0b:00.0: ring 15(vce0) uses VM inv eng 9 on hub 1 [ 2.032676] amdgpu 0000:0b:00.0: ring 16(vce1) uses VM inv eng 10 on hub 1 [ 2.032677] amdgpu 0000:0b:00.0: ring 17(vce2) uses VM inv eng 11 on hub 1 [ 2.032721] [drm] ECC is not present. [ 2.033519] [drm] Initialized amdgpu 3.27.0 20150101 for 0000:0b:00.0 on minor 0 [ 2.036513] hid-generic 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:0c:00.3-4/input0 [ 2.036692] hid-generic 0003:1241:1111.0003: input,hidraw1: USB HID v1.00 Mouse [HID 1241:1111] on usb-0000:02:00.0-6/input0 [ 2.037074] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:07.1/0000:0c:00.3/usb3/3-4/3-4:1.1/0003:046D:C52E.0002/input/input4 [ 2.037890] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:07.1/0000:0c:00.3/usb3/3-4/3-4:1.1/0003:046D:C52E.0002/input/input5 [ 2.096071] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:07.1/0000:0c:00.3/usb3/3-4/3-4:1.1/0003:046D:C52E.0002/input/input6 [ 2.096139] hid-generic 0003:046D:C52E.0002: input,hiddev0,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:0c:00.3-4/input1 [ 2.140953] ata2: SATA link down (SStatus 0 SControl 300) [ 2.164041] usb 1-8: new full-speed USB device number 3 using xhci_hcd [ 2.457039] ata5: SATA link down (SStatus 0 SControl 330) [ 2.492648] usb 1-8: New USB device found, idVendor=2516, idProduct=0051, bcdDevice=11.01 [ 2.492650] usb 1-8: New USB device strings: Mfr=3, Product=1, SerialNumber=0 [ 2.492652] usb 1-8: Product: AMD SR4 lamplight Control [ 2.492653] usb 1-8: Manufacturer: Cooler Master Technology Inc. [ 2.514632] input: Cooler Master Technology Inc. AMD SR4 lamplight Control as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-8/1-8:1.0/0003:2516:0051.0004/input/input9 [ 2.573008] hid-generic 0003:2516:0051.0004: input,hidraw3: USB HID v1.11 Keyboard [Cooler Master Technology Inc. AMD SR4 lamplight Control] on usb-0000:02:00.0-8/input0 [ 2.579749] hid-generic 0003:2516:0051.0005: hiddev1,hidraw4: USB HID v1.11 Device [Cooler Master Technology Inc. AMD SR4 lamplight Control] on usb-0000:02:00.0-8/input1 [ 2.585619] input: Cooler Master Technology Inc. AMD SR4 lamplight Control System Control as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-8/1-8:1.2/0003:2516:0051.0006/input/input10 [ 2.644473] input: Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-8/1-8:1.2/0003:2516:0051.0006/input/input11 [ 2.644565] hid-generic 0003:2516:0051.0006: input,hidraw5: USB HID v1.11 Device [Cooler Master Technology Inc. AMD SR4 lamplight Control] on usb-0000:02:00.0-8/input2 [ 2.932433] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.933153] ata6.00: ATAPI: TSSTcorpDVD-ROM SH-D163B, SB01, max UDMA/33 [ 2.935577] ata6.00: configured for UDMA/33 [ 2.939936] scsi 5:0:0:0: CD-ROM TSSTcorp DVD-ROM SH-D163B SB01 PQ: 0 ANSI: 5 [ 3.034754] sr 5:0:0:0: [sr0] scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray [ 3.034756] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.035215] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 3.465257] PM: Image not found (code -22) [ 3.728704] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 4.592735] systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time. [ 4.833576] systemd[1]: Inserted module 'autofs4' [ 5.093268] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 5.112498] systemd[1]: Detected architecture x86-64. [ 5.132088] systemd[1]: Set hostname to . [ 5.875542] systemd[1]: Listening on Journal Audit Socket. [ 5.875592] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.875621] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 5.875673] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.875716] systemd[1]: Listening on Syslog Socket. [ 5.879963] systemd[1]: Created slice system-getty.slice. [ 5.880252] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 6.323492] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 6.349882] systemd-journald[539]: Received request to flush runtime journal from PID 1 [ 6.369660] EtherCAT: Master driver 1.5.2 334c34cfd2e5+ [ 6.369721] EtherCAT: 1 master waiting for devices. [ 6.462399] ec_generic: EtherCAT master generic Ethernet device module 1.5.2 334c34cfd2e5+ [ 6.462406] EtherCAT: Accepting 04:D9:F5:CD:BC:0F as main device for master 0. [ 6.462421] ec_generic: Binding socket to interface 2 (enp8s0). [ 6.496046] EtherCAT 0: Starting EtherCAT-IDLE thread. [ 7.110346] acpi_cpufreq: overriding BIOS provided _PSD data [ 7.145587] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 7.181252] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address [ 7.181264] sp5100-tco sp5100-tco: Watchdog hardware is disabled [ 7.184097] input: PC Speaker as /devices/platform/pcspkr/input/input12 [ 7.451552] ccp 0000:0c:00.2: enabling device (0000 -> 0002) [ 7.597305] ccp 0000:0c:00.2: ccp enabled [ 7.597421] ccp 0000:0c:00.2: psp initialization failed [ 7.597424] ccp 0000:0c:00.2: enabled [ 8.004349] asus_wmi: ASUS WMI generic driver loaded [ 8.043659] kvm: Nested Virtualization enabled [ 8.043671] kvm: Nested Paging enabled [ 8.043672] SVM: Virtual VMLOAD VMSAVE supported [ 8.043673] SVM: Virtual GIF supported [ 8.111799] asus_wmi: Initialization: 0x0 [ 8.111860] asus_wmi: BIOS WMI version: 0.9 [ 8.112170] asus_wmi: SFUN value: 0x0 [ 8.168894] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input13 [ 8.192367] asus_wmi: Number of fans: 1 [ 8.259590] snd_hda_intel 0000:0b:00.1: Handle vga_switcheroo audio client [ 8.260622] MCE: In-kernel MCE decoding enabled. [ 8.260772] snd_hda_intel 0000:0d:00.3: enabling device (0000 -> 0002) [ 8.272399] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 8.284991] sr 5:0:0:0: Attached scsi generic sg1 type 5 [ 8.301166] EDAC amd64: Node 0: DRAM ECC disabled. [ 8.301169] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 8.417159] EDAC amd64: Node 0: DRAM ECC disabled. [ 8.417161] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 8.512469] EDAC amd64: Node 0: DRAM ECC disabled. [ 8.512472] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 8.517434] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 8.517437] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 8.517440] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 8.517442] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 8.517444] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x0 [ 8.517446] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 8.517448] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 8.517450] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 8.517453] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ 8.565227] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input14 [ 8.592419] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input15 [ 8.626484] input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input16 [ 8.628673] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input20 [ 8.631819] EDAC amd64: Node 0: DRAM ECC disabled. [ 8.631821] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 8.661616] input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input17 [ 8.674200] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input21 [ 8.699168] input: HD-Audio Generic HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input18 [ 8.711681] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input22 [ 8.731230] EDAC amd64: Node 0: DRAM ECC disabled. [ 8.731232] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 8.734337] input: HD-Audio Generic HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input19 [ 8.744143] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input23 [ 8.770240] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input24 [ 8.816266] EDAC amd64: Node 0: DRAM ECC disabled. [ 8.816267] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 8.911379] EDAC amd64: Node 0: DRAM ECC disabled. [ 8.911381] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 9.010564] EDAC amd64: Node 0: DRAM ECC disabled. [ 9.010566] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 9.107744] EDAC amd64: Node 0: DRAM ECC disabled. [ 9.107746] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 9.176562] EDAC amd64: Node 0: DRAM ECC disabled. [ 9.176565] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 9.248069] EDAC amd64: Node 0: DRAM ECC disabled. [ 9.248071] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 9.310822] EDAC amd64: Node 0: DRAM ECC disabled. [ 9.310825] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 9.341651] Adding 16706556k swap on /dev/sda3. Priority:-2 extents:1 across:16706556k FS [ 9.357477] EDAC amd64: Node 0: DRAM ECC disabled. [ 9.357480] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 9.429150] EDAC amd64: Node 0: DRAM ECC disabled. [ 9.429152] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 9.500942] EDAC amd64: Node 0: DRAM ECC disabled. [ 9.500944] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 9.572963] EDAC amd64: Node 0: DRAM ECC disabled. [ 9.572966] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 10.039701] audit: type=1400 audit(1615225954.526:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=789 comm="apparmor_parser" [ 10.039709] audit: type=1400 audit(1615225954.526:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=789 comm="apparmor_parser" [ 10.040294] audit: type=1400 audit(1615225954.530:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=788 comm="apparmor_parser" [ 10.040299] audit: type=1400 audit(1615225954.530:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=788 comm="apparmor_parser" [ 10.040310] audit: type=1400 audit(1615225954.530:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=788 comm="apparmor_parser" [ 10.045086] audit: type=1400 audit(1615225954.534:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=787 comm="apparmor_parser" [ 10.045091] audit: type=1400 audit(1615225954.534:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=787 comm="apparmor_parser" [ 10.866527] enp8s0: 0xffffaefbc2985000, 04:d9:f5:cd:bc:0f, IRQ 44 [ 12.978691] r8168: enp8s0: link up [ 12.984175] EtherCAT 0: Link state of ecm0 changed to UP. [ 12.992049] EtherCAT 0: 1 slave(s) responding on main device. [ 12.992051] EtherCAT 0: Slave states on main device: INIT. [ 12.992185] EtherCAT 0: Scanning bus. [ 13.078124] EtherCAT 0: Bus scanning completed in 84 ms. [ 13.078125] EtherCAT 0: Using slave 0 as DC reference clock. [ 13.104044] EtherCAT 0: Slave states on main device: PREOP. [ 13.215684] NET: Registered protocol family 3 [ 13.353894] NET: Registered protocol family 5 [ 19.244067] EtherCAT WARNING 0: 1 datagram TIMED OUT! [ 19.268191] EtherCAT ERROR 0-0: Failed to receive AL state datagram: [ 19.268192] Datagram [ 19.268196] timed out [ 19.268197] . [ 19.272156] ------------[ cut here ]------------ [ 19.272167] WARNING: CPU: 14 PID: 1405 at kernel/workqueue.c:2920 __flush_work.cold.50+0x1f/0x29 [ 19.272169] Modules linked in: appletalk psnap llc ax25 nls_ascii nls_cp437 vfat fat joydev snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec_hdmi edac_mce_amd sg snd_hda_intel snd_hda_codec eeepc_wmi asus_wmi snd_hda_core sparse_keymap pcc_cpufreq kvm_amd snd_hwdep rfkill snd_pcm video kvm wmi_bmof snd_timer irqbypass snd ccp evdev crct10dif_pclmul soundcore crc32_pclmul rng_core ghash_clmulni_intel k10temp sp5100_tco pcspkr acpi_cpufreq ec_generic(OE) ec_master(OE) ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic fscrypto ecb sr_mod cdrom hid_generic usbhid hid sd_mod amdkfd amdgpu crc32c_intel chash gpu_sched i2c_algo_bit ttm ahci aesni_intel libahci aes_x86_64 xhci_pci crypto_simd drm_kms_helper cryptd glue_helper xhci_hcd libata drm i2c_piix4 nvme usbcore mfd_core scsi_mod [ 19.272213] r8168(OE) nvme_core usb_common wmi gpio_amdpt gpio_generic button [ 19.272219] CPU: 14 PID: 1405 Comm: ifconfig Tainted: G OE 4.19.0-14-rt-amd64 #1 Debian 4.19.171-2 [ 19.272221] Hardware name: System manufacturer System Product Name/PRIME B450M-K, BIOS 1804 07/29/2019 [ 19.272223] RIP: 0010:__flush_work.cold.50+0x1f/0x29 [ 19.272225] Code: 9a 05 96 5b 8b 10 e9 7c 50 00 00 48 c7 c7 c0 1a 04 96 e8 70 50 00 00 0f 0b e9 ea 8c 97 ff 48 c7 c7 c0 1a 04 96 e8 5d 50 00 00 <0f> 0b 45 31 ed e9 d4 8c 97 ff 48 c7 c7 c0 1a 04 96 e8 47 50 00 00 [ 19.272226] RSP: 0018:ffffaefbcab4fab8 EFLAGS: 00010246 [ 19.272228] RAX: 0000000000000024 RBX: ffff88effab56db0 RCX: 0000000000000000 [ 19.272229] RDX: 0000000000000000 RSI: ffffffff96089673 RDI: 00000000ffffffff [ 19.272230] RBP: ffff88effab56db0 R08: 0000000000000034 R09: 0000000000000004 [ 19.272231] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001 [ 19.272231] R13: 0000000000000001 R14: ffffffff9529b7c0 R15: 00000000ffffff9d [ 19.272233] FS: 00007feb1cbc1540(0000) GS:ffff88f00e980000(0000) knlGS:0000000000000000 [ 19.272234] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 19.272235] CR2: 00007ffe53f1ad48 CR3: 00000003fe0fa000 CR4: 00000000003406e0 [ 19.272236] Call Trace: [ 19.272243] ? _synchronize_rcu_expedited+0x25a/0x300 [ 19.272247] ? work_busy+0x90/0x90 [ 19.272249] __cancel_work_timer+0x10a/0x190 [ 19.272252] ? migrate_enable+0x118/0x390 [ 19.272253] ? cpumask_next+0x16/0x20 [ 19.272256] ? pfifo_fast_reset+0xdd/0x130 [ 19.272262] rtl8168_close+0x41/0x1d0 [r8168] [ 19.272265] __dev_close_many+0x9c/0x110 [ 19.272269] __dev_change_flags+0xdd/0x210 [ 19.272271] dev_change_flags+0x21/0x60 [ 19.272274] devinet_ioctl+0x58c/0x6c0 [ 19.272277] inet_ioctl+0x143/0x220 [ 19.272280] ? dev_get_by_name_rcu+0x73/0x90 [ 19.272282] ? dev_get_by_name_rcu+0x73/0x90 [ 19.272283] ? dev_ioctl+0x355/0x570 [ 19.272286] sock_do_ioctl+0x43/0x140 [ 19.272288] sock_ioctl+0x19e/0x320 [ 19.272292] do_vfs_ioctl+0xa4/0x630 [ 19.272295] ? handle_mm_fault+0x106/0x230 [ 19.272297] ksys_ioctl+0x60/0x90 [ 19.272299] __x64_sys_ioctl+0x16/0x20 [ 19.272302] do_syscall_64+0x53/0x110 [ 19.272305] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 19.272307] RIP: 0033:0x7feb1caef427 [ 19.272308] Code: 00 00 90 48 8b 05 69 aa 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 39 aa 0c 00 f7 d8 64 89 01 48 [ 19.272309] RSP: 002b:00007fff84902018 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 [ 19.272311] RAX: ffffffffffffffda RBX: 00007fff84902020 RCX: 00007feb1caef427 [ 19.272312] RDX: 00007fff84902020 RSI: 0000000000008914 RDI: 0000000000000005 [ 19.272312] RBP: 00007fff849020e0 R08: 0000000000000008 R09: 0000000000000000 [ 19.272313] R10: fffffffffffffe07 R11: 0000000000000206 R12: 00000000fffffffe [ 19.272313] R13: 0000000000000005 R14: 0000000000000000 R15: 0000000000000000 [ 19.272316] ---[ end trace 0000000000000002 ]--- [ 19.276049] EtherCAT 0: 0 slave(s) responding on main device. [ 19.296052] EtherCAT 0: Link state of ecm0 changed to DOWN. [ 19.299535] enp8s0: 0xffffaefbc2985000, 04:d9:f5:cd:bc:0f, IRQ 44 [ 19.448238] ------------[ cut here ]------------ [ 19.448247] WARNING: CPU: 14 PID: 1426 at kernel/workqueue.c:2920 __flush_work.cold.50+0x1f/0x29 [ 19.448248] Modules linked in: appletalk psnap llc ax25 nls_ascii nls_cp437 vfat fat joydev snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec_hdmi edac_mce_amd sg snd_hda_intel snd_hda_codec eeepc_wmi asus_wmi snd_hda_core sparse_keymap pcc_cpufreq kvm_amd snd_hwdep rfkill snd_pcm video kvm wmi_bmof snd_timer irqbypass snd ccp evdev crct10dif_pclmul soundcore crc32_pclmul rng_core ghash_clmulni_intel k10temp sp5100_tco pcspkr acpi_cpufreq ec_generic(OE) ec_master(OE) ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic fscrypto ecb sr_mod cdrom hid_generic usbhid hid sd_mod amdkfd amdgpu crc32c_intel chash gpu_sched i2c_algo_bit ttm ahci aesni_intel libahci aes_x86_64 xhci_pci crypto_simd drm_kms_helper cryptd glue_helper xhci_hcd libata drm i2c_piix4 nvme usbcore mfd_core scsi_mod [ 19.448278] r8168(OE) nvme_core usb_common wmi gpio_amdpt gpio_generic button [ 19.448283] CPU: 14 PID: 1426 Comm: ifconfig Tainted: G W OE 4.19.0-14-rt-amd64 #1 Debian 4.19.171-2 [ 19.448284] Hardware name: System manufacturer System Product Name/PRIME B450M-K, BIOS 1804 07/29/2019 [ 19.448286] RIP: 0010:__flush_work.cold.50+0x1f/0x29 [ 19.448288] Code: 9a 05 96 5b 8b 10 e9 7c 50 00 00 48 c7 c7 c0 1a 04 96 e8 70 50 00 00 0f 0b e9 ea 8c 97 ff 48 c7 c7 c0 1a 04 96 e8 5d 50 00 00 <0f> 0b 45 31 ed e9 d4 8c 97 ff 48 c7 c7 c0 1a 04 96 e8 47 50 00 00 [ 19.448288] RSP: 0018:ffffaefbc38a3ab8 EFLAGS: 00010246 [ 19.448290] RAX: 0000000000000024 RBX: ffff88effab56db0 RCX: 0000000000000000 [ 19.448290] RDX: 0000000000000000 RSI: ffffffff96089673 RDI: 00000000ffffffff [ 19.448291] RBP: ffff88effab56db0 R08: 0000000000000034 R09: 0000000000000004 [ 19.448292] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001 [ 19.448292] R13: 0000000000000001 R14: ffffffff9529b7c0 R15: 00000000ffffff9d [ 19.448294] FS: 00007fa37c296540(0000) GS:ffff88f00e980000(0000) knlGS:0000000000000000 [ 19.448295] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 19.448295] CR2: 00007ff608c749a0 CR3: 000000040525e000 CR4: 00000000003406e0 [ 19.448296] Call Trace: [ 19.448302] ? _synchronize_rcu_expedited+0x25a/0x300 [ 19.448306] ? work_busy+0x90/0x90 [ 19.448307] __cancel_work_timer+0x10a/0x190 [ 19.448310] ? migrate_enable+0x118/0x390 [ 19.448312] ? cpumask_next+0x16/0x20 [ 19.448314] ? pfifo_fast_reset+0xdd/0x130 [ 19.448320] rtl8168_close+0x41/0x1d0 [r8168] [ 19.448323] __dev_close_many+0x9c/0x110 [ 19.448326] __dev_change_flags+0xdd/0x210 [ 19.448328] dev_change_flags+0x21/0x60 [ 19.448331] devinet_ioctl+0x58c/0x6c0 [ 19.448334] inet_ioctl+0x143/0x220 [ 19.448336] ? dev_get_by_name_rcu+0x73/0x90 [ 19.448338] ? dev_get_by_name_rcu+0x73/0x90 [ 19.448340] ? dev_ioctl+0x355/0x570 [ 19.448343] sock_do_ioctl+0x43/0x140 [ 19.448346] sock_ioctl+0x19e/0x320 [ 19.448349] do_vfs_ioctl+0xa4/0x630 [ 19.448352] ? handle_mm_fault+0x106/0x230 [ 19.448354] ksys_ioctl+0x60/0x90 [ 19.448356] __x64_sys_ioctl+0x16/0x20 [ 19.448359] do_syscall_64+0x53/0x110 [ 19.448362] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 19.448364] RIP: 0033:0x7fa37c1c4427 [ 19.448365] Code: 00 00 90 48 8b 05 69 aa 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 39 aa 0c 00 f7 d8 64 89 01 48 [ 19.448366] RSP: 002b:00007ffcddb68fb8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [ 19.448367] RAX: ffffffffffffffda RBX: 00007ffcddb68fc0 RCX: 00007fa37c1c4427 [ 19.448368] RDX: 00007ffcddb68fc0 RSI: 0000000000008914 RDI: 0000000000000005 [ 19.448368] RBP: 00007ffcddb69080 R08: 0000000000000008 R09: 0000000000000000 [ 19.448369] R10: fffffffffffffe07 R11: 0000000000000202 R12: 00000000fffffffe [ 19.448369] R13: 0000000000000005 R14: 0000000000000000 R15: 0000000000000000 [ 19.448372] ---[ end trace 0000000000000003 ]--- [ 19.615041] enp8s0: 0xffffaefbc2985000, 04:d9:f5:cd:bc:0f, IRQ 44 [ 21.714709] r8168: enp8s0: link up [ 21.720187] EtherCAT 0: Link state of ecm0 changed to UP. [ 21.728205] EtherCAT 0: 1 slave(s) responding on main device. [ 21.728208] EtherCAT 0: Slave states on main device: PREOP. [ 21.728348] EtherCAT 0: Scanning bus. [ 21.811992] EtherCAT 0: Bus scanning completed in 80 ms. [ 21.811994] EtherCAT 0: Using slave 0 as DC reference clock. [ 87.136054] EtherCAT WARNING 0: 7 datagrams TIMED OUT! [ 87.136058] EtherCAT 0: 0 slave(s) responding on main device. [ 87.160048] ------------[ cut here ]------------ [ 87.160058] WARNING: CPU: 1 PID: 1699 at kernel/workqueue.c:2920 __flush_work.cold.50+0x1f/0x29 [ 87.160059] Modules linked in: appletalk psnap llc ax25 nls_ascii nls_cp437 vfat fat joydev snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec_hdmi edac_mce_amd sg snd_hda_intel snd_hda_codec eeepc_wmi asus_wmi snd_hda_core sparse_keymap pcc_cpufreq kvm_amd snd_hwdep rfkill snd_pcm video kvm wmi_bmof snd_timer irqbypass snd ccp evdev crct10dif_pclmul soundcore crc32_pclmul rng_core ghash_clmulni_intel k10temp sp5100_tco pcspkr acpi_cpufreq ec_generic(OE) ec_master(OE) ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic fscrypto ecb sr_mod cdrom hid_generic usbhid hid sd_mod amdkfd amdgpu crc32c_intel chash gpu_sched i2c_algo_bit ttm ahci aesni_intel libahci aes_x86_64 xhci_pci crypto_simd drm_kms_helper cryptd glue_helper xhci_hcd libata drm i2c_piix4 nvme usbcore mfd_core scsi_mod [ 87.160090] r8168(OE) nvme_core usb_common wmi gpio_amdpt gpio_generic button [ 87.160095] CPU: 1 PID: 1699 Comm: ifconfig Tainted: G W OE 4.19.0-14-rt-amd64 #1 Debian 4.19.171-2 [ 87.160096] Hardware name: System manufacturer System Product Name/PRIME B450M-K, BIOS 1804 07/29/2019 [ 87.160098] RIP: 0010:__flush_work.cold.50+0x1f/0x29 [ 87.160100] Code: 9a 05 96 5b 8b 10 e9 7c 50 00 00 48 c7 c7 c0 1a 04 96 e8 70 50 00 00 0f 0b e9 ea 8c 97 ff 48 c7 c7 c0 1a 04 96 e8 5d 50 00 00 <0f> 0b 45 31 ed e9 d4 8c 97 ff 48 c7 c7 c0 1a 04 96 e8 47 50 00 00 [ 87.160101] RSP: 0018:ffffaefbc3a5bab8 EFLAGS: 00010246 [ 87.160102] RAX: 0000000000000024 RBX: ffff88effab56db0 RCX: 0000000000000000 [ 87.160103] RDX: 0000000000000000 RSI: ffffffff96089673 RDI: 00000000ffffffff [ 87.160104] RBP: ffff88effab56db0 R08: 0000000000000034 R09: 0000000000000004 [ 87.160104] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001 [ 87.160105] R13: 0000000000000001 R14: ffffffff9529b7c0 R15: 00000000ffffff9d [ 87.160106] FS: 00007fa8d139b540(0000) GS:ffff88f00e640000(0000) knlGS:0000000000000000 [ 87.160107] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 87.160108] CR2: 00007f45f501e0f0 CR3: 0000000404200000 CR4: 00000000003406e0 [ 87.160109] Call Trace: [ 87.160115] ? _synchronize_rcu_expedited+0x25a/0x300 [ 87.160118] ? work_busy+0x90/0x90 [ 87.160120] __cancel_work_timer+0x10a/0x190 [ 87.160122] ? migrate_enable+0x118/0x390 [ 87.160124] ? cpumask_next+0x16/0x20 [ 87.160126] ? pfifo_fast_reset+0xdd/0x130 [ 87.160131] rtl8168_close+0x41/0x1d0 [r8168] [ 87.160135] __dev_close_many+0x9c/0x110 [ 87.160138] __dev_change_flags+0xdd/0x210 [ 87.160140] dev_change_flags+0x21/0x60 [ 87.160143] devinet_ioctl+0x58c/0x6c0 [ 87.160145] inet_ioctl+0x143/0x220 [ 87.160148] ? dev_get_by_name_rcu+0x73/0x90 [ 87.160150] ? dev_get_by_name_rcu+0x73/0x90 [ 87.160152] ? dev_ioctl+0x355/0x570 [ 87.160154] sock_do_ioctl+0x43/0x140 [ 87.160157] sock_ioctl+0x19e/0x320 [ 87.160160] do_vfs_ioctl+0xa4/0x630 [ 87.160163] ? handle_mm_fault+0x106/0x230 [ 87.160165] ksys_ioctl+0x60/0x90 [ 87.160167] __x64_sys_ioctl+0x16/0x20 [ 87.160169] do_syscall_64+0x53/0x110 [ 87.160172] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 87.160174] RIP: 0033:0x7fa8d12c9427 [ 87.160175] Code: 00 00 90 48 8b 05 69 aa 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 39 aa 0c 00 f7 d8 64 89 01 48 [ 87.160176] RSP: 002b:00007ffdc84e3288 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 [ 87.160177] RAX: ffffffffffffffda RBX: 00007ffdc84e3290 RCX: 00007fa8d12c9427 [ 87.160178] RDX: 00007ffdc84e3290 RSI: 0000000000008914 RDI: 0000000000000005 [ 87.160178] RBP: 00007ffdc84e3350 R08: 0000000000000008 R09: 0000000000000000 [ 87.160179] R10: fffffffffffffe07 R11: 0000000000000206 R12: 00000000fffffffe [ 87.160180] R13: 0000000000000005 R14: 0000000000000000 R15: 0000000000000000 [ 87.160182] ---[ end trace 0000000000000004 ]--- [ 87.184046] EtherCAT 0: Link state of ecm0 changed to DOWN. [ 87.191604] enp8s0: 0xffffaefbc2985000, 04:d9:f5:cd:bc:0f, IRQ 44 [ 89.298667] r8168: enp8s0: link up [ 89.300035] EtherCAT 0: Link state of ecm0 changed to UP. [ 89.308179] EtherCAT 0: 1 slave(s) responding on main device. [ 89.308192] EtherCAT 0: Slave states on main device: PREOP. [ 89.308335] EtherCAT 0: Scanning bus. [ 89.393644] EtherCAT 0: Bus scanning completed in 84 ms. [ 89.393645] EtherCAT 0: Using slave 0 as DC reference clock. [ 118.201134] EtherCAT: Requesting master 0... [ 118.201137] EtherCAT: Successfully requested master 0. [ 118.422743] EtherCAT 0: Domain0: Logical address 0x00000000, 28 byte, expected working counter 3. [ 118.422746] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 28 byte, type LRW. [ 118.422757] EtherCAT 0: Master thread exited. [ 118.422760] EtherCAT 0: Starting EtherCAT-OP thread. [ 118.422863] EtherCAT WARNING 0: 6 datagrams TIMED OUT! [ 118.789927] EtherCAT WARNING 0-0: Slave does not support changing the PDO mapping! [ 118.789928] EtherCAT WARNING 0-0: [ 118.789929] Currently mapped PDO entries: [ 118.789930] 0x0086:00/16 [ 118.789930] [ 118.789931] 0x0024:00/32 [ 118.789931] . Entries to map: [ 118.789932] 0x0086:01/16 [ 118.789932] [ 118.789933] 0x0018:01/32 [ 118.789935] EtherCAT WARNING 0-0: Slave does not support changing the PDO mapping! [ 118.789935] EtherCAT WARNING 0-0: [ 118.789936] Currently mapped PDO entries: [ 118.789936] 0x0086:00/16 [ 118.789936] [ 118.789937] 0x0024:00/32 [ 118.789937] . Entries to map: [ 118.789937] 0x0086:02/16 [ 118.789938] [ 118.789938] 0x0018:02/32 [ 118.789941] EtherCAT WARNING 0-0: Slave does not support changing the PDO mapping! [ 118.789942] EtherCAT WARNING 0-0: [ 118.789942] Currently mapped PDO entries: [ 118.789942] 0x0087:00/16 [ 118.789943] [ 118.789943] 0x0033:00/32 [ 118.789943] . Entries to map: [ 118.789944] 0x0087:01/16 [ 118.789944] [ 118.789944] 0x0033:01/32 [ 118.789945] [ 118.789945] 0x0054:01/16 [ 118.789947] EtherCAT WARNING 0-0: Slave does not support changing the PDO mapping! [ 118.789947] EtherCAT WARNING 0-0: [ 118.789947] Currently mapped PDO entries: [ 118.789947] 0x0087:00/16 [ 118.789948] [ 118.789948] 0x0033:00/32 [ 118.789948] . Entries to map: [ 118.789949] 0x0087:02/16 [ 118.789949] [ 118.789950] 0x0033:02/32 [ 118.789950] [ 118.789950] 0x0054:02/16 [ 121.220923] EtherCAT ERROR 0-0: Failed to set SAFEOP state, slave refused state change (PREOP + ERROR). [ 121.222921] EtherCAT ERROR 0-0: AL status message 0x0045: "MBX_SOE". [ 121.224923] EtherCAT 0-0: Acknowledged state PREOP. avc@debian:~$