[ 0.228068] pci_bus 0000:0d: resource 1 [mem 0xfce00000-0xfcefffff] [ 0.228123] NET: Registered protocol family 2 [ 0.228321] tcp_listen_portaddr_hash hash table entries: 8192 (order: 7, 524288 bytes) [ 0.228415] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.228780] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes) [ 0.229221] TCP: Hash tables configured (established 131072 bind 65536) [ 0.229339] UDP hash table entries: 8192 (order: 8, 1048576 bytes) [ 0.229490] UDP-Lite hash table entries: 8192 (order: 8, 1048576 bytes) [ 0.229697] NET: Registered protocol family 1 [ 0.229702] NET: Registered protocol family 44 [ 0.229868] pci 0000:0b:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.229876] pci 0000:0b:00.1: Linked as a consumer to 0000:0b:00.0 [ 0.229877] pci 0000:0b:00.1: D0 power state depends on 0000:0b:00.0 [ 0.230029] PCI: CLS 64 bytes, default 64 [ 0.230067] Unpacking initramfs... [ 0.847255] Freeing initrd memory: 61180K [ 0.847276] AMD-Vi: IOMMU performance counters supported [ 0.847753] iommu: Adding device 0000:00:01.0 to group 0 [ 0.847960] iommu: Adding device 0000:00:01.1 to group 1 [ 0.848140] iommu: Adding device 0000:00:01.3 to group 2 [ 0.848346] iommu: Adding device 0000:00:02.0 to group 3 [ 0.848522] iommu: Adding device 0000:00:03.0 to group 4 [ 0.848723] iommu: Adding device 0000:00:03.1 to group 5 [ 0.848898] iommu: Adding device 0000:00:04.0 to group 6 [ 0.849128] iommu: Adding device 0000:00:07.0 to group 7 [ 0.849299] iommu: Adding device 0000:00:07.1 to group 8 [ 0.849495] iommu: Adding device 0000:00:08.0 to group 9 [ 0.849671] iommu: Adding device 0000:00:08.1 to group 10 [ 0.849878] iommu: Adding device 0000:00:14.0 to group 11 [ 0.849895] iommu: Adding device 0000:00:14.3 to group 11 [ 0.850098] iommu: Adding device 0000:00:18.0 to group 12 [ 0.850116] iommu: Adding device 0000:00:18.1 to group 12 [ 0.850132] iommu: Adding device 0000:00:18.2 to group 12 [ 0.850148] iommu: Adding device 0000:00:18.3 to group 12 [ 0.850164] iommu: Adding device 0000:00:18.4 to group 12 [ 0.850180] iommu: Adding device 0000:00:18.5 to group 12 [ 0.850194] iommu: Adding device 0000:00:18.6 to group 12 [ 0.850210] iommu: Adding device 0000:00:18.7 to group 12 [ 0.850411] iommu: Adding device 0000:01:00.0 to group 13 [ 0.850607] iommu: Adding device 0000:02:00.0 to group 14 [ 0.850631] iommu: Adding device 0000:02:00.1 to group 14 [ 0.850654] iommu: Adding device 0000:02:00.2 to group 14 [ 0.850666] iommu: Adding device 0000:03:00.0 to group 14 [ 0.850677] iommu: Adding device 0000:03:04.0 to group 14 [ 0.850692] iommu: Adding device 0000:03:05.0 to group 14 [ 0.850704] iommu: Adding device 0000:03:06.0 to group 14 [ 0.850715] iommu: Adding device 0000:03:07.0 to group 14 [ 0.850735] iommu: Adding device 0000:08:00.0 to group 14 [ 0.850933] iommu: Adding device 0000:09:00.0 to group 15 [ 0.851130] iommu: Adding device 0000:0a:00.0 to group 16 [ 0.851356] iommu: Adding device 0000:0b:00.0 to group 17 [ 0.851424] iommu: Using direct mapping for device 0000:0b:00.0 [ 0.851538] iommu: Adding device 0000:0b:00.1 to group 18 [ 0.851676] iommu: Adding device 0000:0c:00.0 to group 19 [ 0.851847] iommu: Adding device 0000:0c:00.2 to group 20 [ 0.852049] iommu: Adding device 0000:0c:00.3 to group 21 [ 0.852225] iommu: Adding device 0000:0d:00.0 to group 22 [ 0.852419] iommu: Adding device 0000:0d:00.2 to group 23 [ 0.852596] iommu: Adding device 0000:0d:00.3 to group 24 [ 0.852876] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40 [ 0.852877] AMD-Vi: Extended features (0xf77ef22294ada): [ 0.852877] PPR NX GT IA GA PC GA_vAPIC [ 0.852880] AMD-Vi: Interrupt remapping enabled [ 0.852880] AMD-Vi: virtual APIC enabled [ 0.853016] AMD-Vi: Lazy IO/TLB flushing enabled [ 0.855183] amd_uncore: AMD NB counters detected [ 0.855192] amd_uncore: AMD LLC counters detected [ 0.855468] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank). [ 0.856155] Initialise system trusted keyrings [ 0.856169] Key type blacklist registered [ 0.856226] workingset: timestamp_bits=40 max_order=22 bucket_order=0 [ 0.857224] zbud: loaded [ 0.943833] Key type asymmetric registered [ 0.943834] Asymmetric key parser 'x509' registered [ 0.943855] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.943880] io scheduler noop registered [ 0.943881] io scheduler deadline registered [ 0.943906] io scheduler cfq registered (default) [ 0.943906] io scheduler mq-deadline registered [ 0.944978] pcieport 0000:00:01.1: AER enabled with IRQ 26 [ 0.945906] pcieport 0000:00:01.3: AER enabled with IRQ 27 [ 0.946880] pcieport 0000:00:03.1: AER enabled with IRQ 28 [ 0.947931] pcieport 0000:00:07.1: AER enabled with IRQ 29 [ 0.948997] pcieport 0000:00:08.1: AER enabled with IRQ 31 [ 0.950668] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.950676] efifb: probing for efifb [ 0.950683] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k [ 0.950684] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 0.950684] efifb: scrolling: redraw [ 0.950685] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.951823] Console: switching to colour frame buffer device 128x48 [ 0.952891] fb0: EFI VGA frame buffer device [ 0.952932] Monitor-Mwait will be used to enter C-1 state [ 0.954336] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.975216] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.975533] Linux agpgart interface v0.103 [ 0.975801] AMD IOMMUv2 driver by Joerg Roedel [ 0.976811] i8042: PNP: No PS/2 controller found. [ 0.976849] mousedev: PS/2 mouse device common for all mice [ 0.976883] rtc_cmos 00:01: RTC can wake from S4 [ 0.977157] rtc_cmos 00:01: registered as rtc0 [ 0.977167] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.977448] NET: Registered protocol family 10 [ 0.981785] Segment Routing with IPv6 [ 0.981800] mip6: Mobile IPv6 [ 0.981802] NET: Registered protocol family 17 [ 0.981837] mpls_gso: MPLS GSO support [ 0.982603] mce: Using 23 MCE banks [ 0.982630] microcode: CPU0: patch_level=0x0800820d [ 0.982636] microcode: CPU1: patch_level=0x0800820d [ 0.982641] microcode: CPU2: patch_level=0x0800820d [ 0.982647] microcode: CPU3: patch_level=0x0800820d [ 0.982654] microcode: CPU4: patch_level=0x0800820d [ 0.982660] microcode: CPU5: patch_level=0x0800820d [ 0.982666] microcode: CPU6: patch_level=0x0800820d [ 0.982672] microcode: CPU7: patch_level=0x0800820d [ 0.982678] microcode: CPU8: patch_level=0x0800820d [ 0.982680] microcode: CPU9: patch_level=0x0800820d [ 0.982684] microcode: CPU10: patch_level=0x0800820d [ 0.982689] microcode: CPU11: patch_level=0x0800820d [ 0.982694] microcode: CPU12: patch_level=0x0800820d [ 0.982699] microcode: CPU13: patch_level=0x0800820d [ 0.982705] microcode: CPU14: patch_level=0x0800820d [ 0.982710] microcode: CPU15: patch_level=0x0800820d [ 0.982739] microcode: Microcode Update Driver: v2.2. [ 0.982747] sched_clock: Marking stable (1010728756, -27992795)->(989231546, -6495585) [ 0.983118] registered taskstats version 1 [ 0.983126] Loading compiled-in X.509 certificates [ 1.003116] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 1.003126] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9' [ 1.003149] zswap: loaded using pool lzo/zbud [ 1.003485] AppArmor: AppArmor sha1 policy hashing enabled [ 1.003865] rtc_cmos 00:01: setting system clock to 2021-03-08 20:56:15 UTC (1615236975) [ 1.203230] Freeing unused kernel image memory: 1548K [ 1.203232] Write protecting the kernel read-only data: 16384k [ 1.205148] Freeing unused kernel image memory: 2032K [ 1.205323] Freeing unused kernel image memory: 764K [ 1.210655] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.210657] Run /init as init process [ 1.266173] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.266255] ACPI: Power Button [PWRB] [ 1.266836] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.280032] ACPI: Power Button [PWRF] [ 1.292328] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 1.292330] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection [ 1.295081] r8168: loading out-of-tree module taints kernel. [ 1.295278] r8168: module verification failed: signature and/or required key missing - tainting kernel [ 1.297634] cryptd: max_cpu_qlen set to 1000 [ 1.299551] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 1.299856] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 1.305747] SCSI subsystem initialized [ 1.306150] r8168 Gigabit Ethernet driver 8.046.00-NAPI loaded [ 1.307398] nvme nvme0: pci function 0000:01:00.0 [ 1.316771] ACPI: bus type USB registered [ 1.317109] usbcore: registered new interface driver usbfs [ 1.317326] usbcore: registered new interface driver hub [ 1.317376] AVX2 version of gcm_enc/dec engaged. [ 1.317378] AES CTR mode by8 optimization enabled [ 1.317475] usbcore: registered new device driver usb [ 1.322659] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 1.322664] r8168 Copyright (C) 2018 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 1.325513] r8168 0000:08:00.0 enp8s0: renamed from eth0 [ 1.330654] libata version 3.00 loaded. [ 1.339444] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 1.339452] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1 [ 1.340524] ahci 0000:02:00.1: version 3.0 [ 1.340667] ahci 0000:02:00.1: SSS flag set, parallel bus scan disabled [ 1.340699] ahci 0000:02:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode [ 1.340700] ahci 0000:02:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst [ 1.341295] scsi host0: ahci [ 1.341453] scsi host1: ahci [ 1.341537] scsi host2: ahci [ 1.341615] scsi host3: ahci [ 1.341701] scsi host4: ahci [ 1.341780] scsi host5: ahci [ 1.341865] scsi host6: ahci [ 1.341949] scsi host7: ahci [ 1.342002] ata1: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80100 irq 47 [ 1.342004] ata2: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80180 irq 47 [ 1.342004] ata3: DUMMY [ 1.342005] ata4: DUMMY [ 1.342006] ata5: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80300 irq 47 [ 1.342008] ata6: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80380 irq 47 [ 1.342008] ata7: DUMMY [ 1.342008] ata8: DUMMY [ 1.342145] ahci 0000:0d:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 1.342147] ahci 0000:0d:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part [ 1.342292] scsi host8: ahci [ 1.342343] ata9: SATA max UDMA/133 abar m4096@0xfce08000 port 0xfce08100 irq 49 [ 1.394769] xhci_hcd 0000:02:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410 [ 1.395316] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.395318] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.395319] usb usb1: Product: xHCI Host Controller [ 1.395320] usb usb1: Manufacturer: Linux 4.19.0-14-rt-amd64 xhci-hcd [ 1.395320] usb usb1: SerialNumber: 0000:02:00.0 [ 1.395420] hub 1-0:1.0: USB hub found [ 1.395432] hub 1-0:1.0: 10 ports detected [ 1.401550] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 1.401553] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2 [ 1.401556] xhci_hcd 0000:02:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 1.401609] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.401627] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 1.401628] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.401629] usb usb2: Product: xHCI Host Controller [ 1.401630] usb usb2: Manufacturer: Linux 4.19.0-14-rt-amd64 xhci-hcd [ 1.401631] usb usb2: SerialNumber: 0000:02:00.0 [ 1.401699] hub 2-0:1.0: USB hub found [ 1.401706] hub 2-0:1.0: 4 ports detected [ 1.404292] xhci_hcd 0000:0c:00.3: xHCI Host Controller [ 1.404296] xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 3 [ 1.404390] xhci_hcd 0000:0c:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x0000000000000410 [ 1.404843] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.404844] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.404845] usb usb3: Product: xHCI Host Controller [ 1.404846] usb usb3: Manufacturer: Linux 4.19.0-14-rt-amd64 xhci-hcd [ 1.404846] usb usb3: SerialNumber: 0000:0c:00.3 [ 1.404918] hub 3-0:1.0: USB hub found [ 1.404923] hub 3-0:1.0: 4 ports detected [ 1.405092] xhci_hcd 0000:0c:00.3: xHCI Host Controller [ 1.405094] xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 4 [ 1.405096] xhci_hcd 0000:0c:00.3: Host supports USB 3.0 SuperSpeed [ 1.405107] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.405124] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 1.405125] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.405125] usb usb4: Product: xHCI Host Controller [ 1.405126] usb usb4: Manufacturer: Linux 4.19.0-14-rt-amd64 xhci-hcd [ 1.405127] usb usb4: SerialNumber: 0000:0c:00.3 [ 1.405197] hub 4-0:1.0: USB hub found [ 1.405203] hub 4-0:1.0: 4 ports detected [ 1.428421] [drm] amdgpu kernel modesetting enabled. [ 1.435323] Parsing CRAT table with 1 nodes [ 1.435328] Ignoring ACPI CRAT on non-APU system [ 1.435330] Virtual CRAT table created for CPU [ 1.435331] Parsing CRAT table with 1 nodes [ 1.435332] Creating topology SYSFS entries [ 1.435351] Topology: Add CPU node [ 1.435351] Finished initializing topology [ 1.435395] kfd kfd: Initialized module [ 1.435566] checking generic (e0000000 300000) vs hw (e0000000 10000000) [ 1.435567] fb: switching to amdgpudrmfb from EFI VGA [ 1.435585] Console: switching to colour dummy device 80x25 [ 1.435807] [drm] initializing kernel modesetting (VEGA10 0x1002:0x687F 0x1849:0x1001 0xC3). [ 1.435821] [drm] register mmio base: 0xFCA00000 [ 1.435822] [drm] register mmio size: 524288 [ 1.435829] [drm] add ip block number 0 [ 1.435830] [drm] add ip block number 1 [ 1.435831] [drm] add ip block number 2 [ 1.435831] [drm] add ip block number 3 [ 1.435831] [drm] add ip block number 4 [ 1.435832] [drm] add ip block number 5 [ 1.435832] [drm] add ip block number 6 [ 1.435833] [drm] add ip block number 7 [ 1.435833] [drm] add ip block number 8 [ 1.435834] [drm] add ip block number 9 [ 1.435852] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_gpu_info.bin [ 1.435861] [drm] UVD(0) is enabled in VM mode [ 1.435862] [drm] UVD(0) ENC is enabled in VM mode [ 1.435862] [drm] VCE enabled in VM mode [ 1.435877] amdgpu 0000:0b:00.0: No more image in the PCI ROM [ 1.435894] ATOM BIOS: 113-TIC46561-001 [ 1.435912] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit [ 1.435917] amdgpu 0000:0b:00.0: VRAM: 8176M 0x000000F400000000 - 0x000000F5FEFFFFFF (8176M used) [ 1.435918] amdgpu 0000:0b:00.0: GART: 512M 0x000000F600000000 - 0x000000F61FFFFFFF [ 1.435921] [drm] Detected VRAM RAM=8176M, BAR=256M [ 1.435922] [drm] RAM width 2048bits HBM [ 1.435960] [TTM] Zone kernel: Available graphics memory: 8208974 kiB [ 1.435961] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 1.435961] [TTM] Initializing pool allocator [ 1.435964] [TTM] Initializing DMA pool allocator [ 1.435986] [drm] amdgpu: 8176M of VRAM memory ready [ 1.435987] [drm] amdgpu: 8176M of GTT memory ready. [ 1.435995] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 1.436112] [drm] PCIE GART of 512M enabled (table at 0x000000F400900000). [ 1.436265] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_sos.bin [ 1.436283] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_asd.bin [ 1.436335] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_acg_smc.bin [ 1.436358] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_pfp.bin [ 1.436370] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_me.bin [ 1.436380] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_ce.bin [ 1.436391] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_rlc.bin [ 1.436443] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_mec.bin [ 1.436495] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_mec2.bin [ 1.437138] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_sdma.bin [ 1.437151] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_sdma1.bin [ 1.437152] [drm] use_doorbell being set to: [true] [ 1.437179] [drm] use_doorbell being set to: [true] [ 1.437284] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_uvd.bin [ 1.437286] [drm] Found UVD firmware Version: 1.87 Family ID: 17 [ 1.437288] [drm] PSP loading UVD firmware [ 1.437796] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_vce.bin [ 1.437798] [drm] Found VCE firmware Version: 55.3 Binary ID: 4 [ 1.437801] [drm] PSP loading VCE firmware [ 1.520664] nvme nvme0: Shutdown timeout set to 8 seconds [ 1.556416] nvme0n1: p1 p2 p3 p4 [ 1.654655] ata9: SATA link down (SStatus 0 SControl 300) [ 1.736040] usb 1-6: new low-speed USB device number 2 using xhci_hcd [ 1.744940] usb 3-4: new full-speed USB device number 2 using xhci_hcd [ 1.769543] amdgpu: [powerplay] GPU over temperature range detected on PCIe 0:0.0! [ 1.792073] [drm] Display Core initialized with v3.1.59! [ 1.816716] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.817712] ata1.00: ATA-8: ST1000DM010-2EP102, CC43, max UDMA/133 [ 1.817713] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.817830] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.817830] [drm] Driver supports precise vblank timestamp query. [ 1.818810] ata1.00: configured for UDMA/133 [ 1.818945] scsi 0:0:0:0: Direct-Access ATA ST1000DM010-2EP1 CC43 PQ: 0 ANSI: 5 [ 1.821595] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.821596] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.821600] sd 0:0:0:0: [sda] Write Protect is off [ 1.821600] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.821605] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.840897] [drm] UVD and UVD ENC initialized successfully. [ 1.857107] tsc: Refined TSC clocksource calibration: 3693.062 MHz [ 1.857123] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a7777116fa, max_idle_ns: 881590883556 ns [ 1.857182] clocksource: Switched to clocksource tsc [ 1.866257] sda: sda1 sda2 sda3 [ 1.866686] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.928312] usb 3-4: New USB device found, idVendor=046d, idProduct=c52e, bcdDevice=15.00 [ 1.928314] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.928315] usb 3-4: Product: USB Receiver [ 1.928316] usb 3-4: Manufacturer: Logitech [ 1.940601] [drm] VCE initialized successfully. [ 1.942019] kfd kfd: Allocated 3969056 bytes on gart [ 1.942032] Virtual CRAT table created for GPU [ 1.942032] Parsing CRAT table with 1 nodes [ 1.942041] Creating topology SYSFS entries [ 1.942123] Topology: Add dGPU node [0x687f:0x1002] [ 1.942165] kfd kfd: added device 1002:687f [ 1.943150] [drm] fb mappable at 0xE1000000 [ 1.943151] [drm] vram apper at 0xE0000000 [ 1.943152] [drm] size 8294400 [ 1.943152] [drm] fb depth is 24 [ 1.943153] [drm] pitch is 7680 [ 1.943192] fbcon: amdgpudrmfb (fb0) is primary device [ 1.962356] hidraw: raw HID events driver (C) Jiri Kosina [ 1.971638] Console: switching to colour frame buffer device 240x67 [ 1.991615] amdgpu 0000:0b:00.0: fb0: amdgpudrmfb frame buffer device [ 1.992272] usb 1-6: New USB device found, idVendor=1241, idProduct=1111, bcdDevice= 1.00 [ 1.992275] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.014743] usbcore: registered new interface driver usbhid [ 2.014745] usbhid: USB HID core driver [ 2.016332] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:07.1/0000:0c:00.3/usb3/3-4/3-4:1.0/0003:046D:C52E.0001/input/input2 [ 2.020111] amdgpu 0000:0b:00.0: ring 0(gfx) uses VM inv eng 4 on hub 0 [ 2.020113] amdgpu 0000:0b:00.0: ring 1(comp_1.0.0) uses VM inv eng 5 on hub 0 [ 2.020114] amdgpu 0000:0b:00.0: ring 2(comp_1.1.0) uses VM inv eng 6 on hub 0 [ 2.020115] amdgpu 0000:0b:00.0: ring 3(comp_1.2.0) uses VM inv eng 7 on hub 0 [ 2.020117] amdgpu 0000:0b:00.0: ring 4(comp_1.3.0) uses VM inv eng 8 on hub 0 [ 2.020118] amdgpu 0000:0b:00.0: ring 5(comp_1.0.1) uses VM inv eng 9 on hub 0 [ 2.020119] amdgpu 0000:0b:00.0: ring 6(comp_1.1.1) uses VM inv eng 10 on hub 0 [ 2.020120] amdgpu 0000:0b:00.0: ring 7(comp_1.2.1) uses VM inv eng 11 on hub 0 [ 2.020121] amdgpu 0000:0b:00.0: ring 8(comp_1.3.1) uses VM inv eng 12 on hub 0 [ 2.020122] amdgpu 0000:0b:00.0: ring 9(kiq_2.1.0) uses VM inv eng 13 on hub 0 [ 2.020123] amdgpu 0000:0b:00.0: ring 10(sdma0) uses VM inv eng 4 on hub 1 [ 2.020124] amdgpu 0000:0b:00.0: ring 11(sdma1) uses VM inv eng 5 on hub 1 [ 2.020125] amdgpu 0000:0b:00.0: ring 12(uvd<0>) uses VM inv eng 6 on hub 1 [ 2.020126] amdgpu 0000:0b:00.0: ring 13(uvd_enc0<0>) uses VM inv eng 7 on hub 1 [ 2.020127] amdgpu 0000:0b:00.0: ring 14(uvd_enc1<0>) uses VM inv eng 8 on hub 1 [ 2.020128] amdgpu 0000:0b:00.0: ring 15(vce0) uses VM inv eng 9 on hub 1 [ 2.020129] amdgpu 0000:0b:00.0: ring 16(vce1) uses VM inv eng 10 on hub 1 [ 2.020130] amdgpu 0000:0b:00.0: ring 17(vce2) uses VM inv eng 11 on hub 1 [ 2.020174] [drm] ECC is not present. [ 2.020807] [drm] Initialized amdgpu 3.27.0 20150101 for 0000:0b:00.0 on minor 0 [ 2.076866] hid-generic 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:0c:00.3-4/input0 [ 2.077115] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:07.1/0000:0c:00.3/usb3/3-4/3-4:1.1/0003:046D:C52E.0002/input/input3 [ 2.077177] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:07.1/0000:0c:00.3/usb3/3-4/3-4:1.1/0003:046D:C52E.0002/input/input4 [ 2.136274] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:07.1/0000:0c:00.3/usb3/3-4/3-4:1.1/0003:046D:C52E.0002/input/input5 [ 2.136407] hid-generic 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:0c:00.3-4/input1 [ 2.136476] ata2: SATA link down (SStatus 0 SControl 300) [ 2.136541] input: HID 1241:1111 as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-6/1-6:1.0/0003:1241:1111.0003/input/input8 [ 2.136608] hid-generic 0003:1241:1111.0003: input,hidraw2: USB HID v1.00 Mouse [HID 1241:1111] on usb-0000:02:00.0-6/input0 [ 2.140031] usb 1-8: new full-speed USB device number 3 using xhci_hcd [ 2.450867] ata5: SATA link down (SStatus 0 SControl 330) [ 2.468119] usb 1-8: New USB device found, idVendor=2516, idProduct=0051, bcdDevice=11.01 [ 2.468121] usb 1-8: New USB device strings: Mfr=3, Product=1, SerialNumber=0 [ 2.468122] usb 1-8: Product: AMD SR4 lamplight Control [ 2.468124] usb 1-8: Manufacturer: Cooler Master Technology Inc. [ 2.490543] input: Cooler Master Technology Inc. AMD SR4 lamplight Control as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-8/1-8:1.0/0003:2516:0051.0004/input/input9 [ 2.548584] hid-generic 0003:2516:0051.0004: input,hidraw3: USB HID v1.11 Keyboard [Cooler Master Technology Inc. AMD SR4 lamplight Control] on usb-0000:02:00.0-8/input0 [ 2.556241] hid-generic 0003:2516:0051.0005: hiddev1,hidraw4: USB HID v1.11 Device [Cooler Master Technology Inc. AMD SR4 lamplight Control] on usb-0000:02:00.0-8/input1 [ 2.561618] input: Cooler Master Technology Inc. AMD SR4 lamplight Control System Control as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-8/1-8:1.2/0003:2516:0051.0006/input/input10 [ 2.620480] input: Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-8/1-8:1.2/0003:2516:0051.0006/input/input11 [ 2.620562] hid-generic 0003:2516:0051.0006: input,hidraw5: USB HID v1.11 Device [Cooler Master Technology Inc. AMD SR4 lamplight Control] on usb-0000:02:00.0-8/input2 [ 2.928473] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.929200] ata6.00: ATAPI: TSSTcorpDVD-ROM SH-D163B, SB01, max UDMA/33 [ 2.931243] ata6.00: configured for UDMA/33 [ 2.934940] scsi 5:0:0:0: CD-ROM TSSTcorp DVD-ROM SH-D163B SB01 PQ: 0 ANSI: 5 [ 3.013663] sr 5:0:0:0: [sr0] scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray [ 3.013665] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.014051] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 3.441180] PM: Image not found (code -22) [ 3.705642] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 4.585911] systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time. [ 4.835476] systemd[1]: Inserted module 'autofs4' [ 5.116785] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 5.136086] systemd[1]: Detected architecture x86-64. [ 5.167289] systemd[1]: Set hostname to . [ 5.887776] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.887875] systemd[1]: Listening on Syslog Socket. [ 5.888251] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 5.888313] systemd[1]: Listening on Journal Socket. [ 5.891879] systemd[1]: Mounting Huge Pages File System... [ 5.892734] systemd[1]: Mounting Kernel Debug File System... [ 5.910279] systemd[1]: Starting Load Kernel Modules... [ 6.183555] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 6.429960] EtherCAT: Master driver 1.5.2 334c34cfd2e5+ [ 6.430021] EtherCAT: 1 master waiting for devices. [ 6.472602] ec_generic: EtherCAT master generic Ethernet device module 1.5.2 334c34cfd2e5+ [ 6.472609] EtherCAT: Accepting 04:D9:F5:CD:BC:0F as main device for master 0. [ 6.472623] ec_generic: Binding socket to interface 2 (enp8s0). [ 6.502051] systemd-journald[551]: Received request to flush runtime journal from PID 1 [ 6.516062] EtherCAT 0: Starting EtherCAT-IDLE thread. [ 7.209940] input: PC Speaker as /devices/platform/pcspkr/input/input12 [ 7.237879] acpi_cpufreq: overriding BIOS provided _PSD data [ 7.365024] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 7.397913] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address [ 7.397925] sp5100-tco sp5100-tco: Watchdog hardware is disabled [ 7.617117] ccp 0000:0c:00.2: enabling device (0000 -> 0002) [ 7.744161] ccp 0000:0c:00.2: ccp enabled [ 7.744269] ccp 0000:0c:00.2: psp initialization failed [ 7.744271] ccp 0000:0c:00.2: enabled [ 7.753589] asus_wmi: ASUS WMI generic driver loaded [ 7.847237] asus_wmi: Initialization: 0x0 [ 7.847284] asus_wmi: BIOS WMI version: 0.9 [ 7.847438] asus_wmi: SFUN value: 0x0 [ 7.913814] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input13 [ 7.944158] kvm: Nested Virtualization enabled [ 7.944173] kvm: Nested Paging enabled [ 7.944174] SVM: Virtual VMLOAD VMSAVE supported [ 7.944175] SVM: Virtual GIF supported [ 7.946135] asus_wmi: Number of fans: 1 [ 8.125731] MCE: In-kernel MCE decoding enabled. [ 8.174851] snd_hda_intel 0000:0b:00.1: Handle vga_switcheroo audio client [ 8.175574] snd_hda_intel 0000:0d:00.3: enabling device (0000 -> 0002) [ 8.183848] EDAC amd64: Node 0: DRAM ECC disabled. [ 8.183851] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 8.280672] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 8.280716] EDAC amd64: Node 0: DRAM ECC disabled. [ 8.280718] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 8.286518] sr 5:0:0:0: Attached scsi generic sg1 type 5 [ 8.379581] EDAC amd64: Node 0: DRAM ECC disabled. [ 8.379583] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 8.395309] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 8.395312] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 8.395315] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 8.395317] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 8.395324] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x0 [ 8.395326] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 8.395329] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 8.395331] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 8.395333] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ 8.438690] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input14 [ 8.459471] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input15 [ 8.491792] input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input16 [ 8.493621] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input20 [ 8.500085] EDAC amd64: Node 0: DRAM ECC disabled. [ 8.500088] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 8.527848] input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input17 [ 8.541009] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input21 [ 8.567639] input: HD-Audio Generic HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input18 [ 8.581323] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input22 [ 8.608962] input: HD-Audio Generic HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input19 [ 8.619448] EDAC amd64: Node 0: DRAM ECC disabled. [ 8.619451] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 8.622016] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input23 [ 8.652654] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input24 [ 8.706722] EDAC amd64: Node 0: DRAM ECC disabled. [ 8.706724] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 8.807504] EDAC amd64: Node 0: DRAM ECC disabled. [ 8.807506] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 8.900544] EDAC amd64: Node 0: DRAM ECC disabled. [ 8.900546] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 9.011006] EDAC amd64: Node 0: DRAM ECC disabled. [ 9.011008] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 9.089778] EDAC amd64: Node 0: DRAM ECC disabled. [ 9.089781] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 9.142222] EDAC amd64: Node 0: DRAM ECC disabled. [ 9.142224] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 9.201739] EDAC amd64: Node 0: DRAM ECC disabled. [ 9.201742] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 9.261364] EDAC amd64: Node 0: DRAM ECC disabled. [ 9.261367] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 9.329094] EDAC amd64: Node 0: DRAM ECC disabled. [ 9.329096] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 9.367653] Adding 16706556k swap on /dev/sda3. Priority:-2 extents:1 across:16706556k FS [ 9.388929] EDAC amd64: Node 0: DRAM ECC disabled. [ 9.388932] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 9.452907] EDAC amd64: Node 0: DRAM ECC disabled. [ 9.452909] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 10.024777] audit: type=1400 audit(1615236984.517:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=799 comm="apparmor_parser" [ 10.024781] audit: type=1400 audit(1615236984.517:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=799 comm="apparmor_parser" [ 10.025496] audit: type=1400 audit(1615236984.517:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=798 comm="apparmor_parser" [ 10.025500] audit: type=1400 audit(1615236984.517:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=798 comm="apparmor_parser" [ 10.025504] audit: type=1400 audit(1615236984.517:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=798 comm="apparmor_parser" [ 10.030309] audit: type=1400 audit(1615236984.521:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=797 comm="apparmor_parser" [ 10.030312] audit: type=1400 audit(1615236984.521:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=797 comm="apparmor_parser" [ 11.026738] enp8s0: 0xffffb3d2c2985000, 04:d9:f5:cd:bc:0f, IRQ 44 [ 13.134709] r8168: enp8s0: link up [ 13.136056] EtherCAT 0: Link state of ecm0 changed to UP. [ 13.148044] EtherCAT 0: 1 slave(s) responding on main device. [ 13.148048] EtherCAT 0: Slave states on main device: PREOP. [ 13.148192] EtherCAT 0: Scanning bus. [ 13.233776] EtherCAT 0: Bus scanning completed in 84 ms. [ 13.233778] EtherCAT 0: Using slave 0 as DC reference clock. [ 13.259078] NET: Registered protocol family 3 [ 13.583296] NET: Registered protocol family 5 [ 19.204059] EtherCAT WARNING 0: 1 datagram TIMED OUT! [ 19.228194] EtherCAT ERROR 0-0: Failed to receive AL state datagram: [ 19.228195] Datagram [ 19.228198] timed out [ 19.228199] . [ 19.232037] ------------[ cut here ]------------ [ 19.232050] WARNING: CPU: 4 PID: 1417 at kernel/workqueue.c:2920 __flush_work.cold.50+0x1f/0x29 [ 19.232052] Modules linked in: appletalk psnap llc ax25 nls_ascii nls_cp437 vfat fat joydev snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec_hdmi sg snd_hda_intel edac_mce_amd snd_hda_codec snd_hda_core snd_hwdep pcc_cpufreq kvm_amd eeepc_wmi snd_pcm asus_wmi snd_timer sparse_keymap snd ccp kvm soundcore irqbypass rng_core crct10dif_pclmul sp5100_tco k10temp evdev rfkill crc32_pclmul video ghash_clmulni_intel acpi_cpufreq pcspkr wmi_bmof ec_generic(OE) ec_master(OE) ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic fscrypto ecb sr_mod cdrom hid_generic usbhid hid sd_mod amdkfd amdgpu chash gpu_sched i2c_algo_bit ttm drm_kms_helper ahci crc32c_intel xhci_pci libahci xhci_hcd libata drm aesni_intel aes_x86_64 nvme crypto_simd usbcore mfd_core r8168(OE) cryptd scsi_mod glue_helper [ 19.232092] nvme_core i2c_piix4 usb_common wmi gpio_amdpt gpio_generic button [ 19.232098] CPU: 4 PID: 1417 Comm: ifconfig Tainted: G OE 4.19.0-14-rt-amd64 #1 Debian 4.19.171-2 [ 19.232099] Hardware name: System manufacturer System Product Name/PRIME B450M-K, BIOS 1804 07/29/2019 [ 19.232101] RIP: 0010:__flush_work.cold.50+0x1f/0x29 [ 19.232103] Code: 9a a5 93 5b 8b 10 e9 7c 50 00 00 48 c7 c7 c0 1a a4 93 e8 70 50 00 00 0f 0b e9 ea 8c 97 ff 48 c7 c7 c0 1a a4 93 e8 5d 50 00 00 <0f> 0b 45 31 ed e9 d4 8c 97 ff 48 c7 c7 c0 1a a4 93 e8 47 50 00 00 [ 19.232105] RSP: 0018:ffffb3d2c925fab8 EFLAGS: 00010246 [ 19.232106] RAX: 0000000000000024 RBX: ffff9ed2fab66db0 RCX: 0000000000000000 [ 19.232108] RDX: 0000000000000000 RSI: ffffffff93a89673 RDI: 00000000ffffffff [ 19.232108] RBP: ffff9ed2fab66db0 R08: 0000000000000034 R09: 0000000000000004 [ 19.232109] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001 [ 19.232110] R13: 0000000000000001 R14: ffffffff92c9b7c0 R15: 00000000ffffff9d [ 19.232111] FS: 00007f9c5081f540(0000) GS:ffff9ed30e700000(0000) knlGS:0000000000000000 [ 19.232112] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 19.232113] CR2: 00007f9247892000 CR3: 00000004046e8000 CR4: 00000000003406e0 [ 19.232114] Call Trace: [ 19.232121] ? _synchronize_rcu_expedited+0x25a/0x300 [ 19.232124] ? work_busy+0x90/0x90 [ 19.232126] __cancel_work_timer+0x10a/0x190 [ 19.232129] ? migrate_enable+0x118/0x390 [ 19.232131] ? cpumask_next+0x16/0x20 [ 19.232133] ? pfifo_fast_reset+0xdd/0x130 [ 19.232139] rtl8168_close+0x41/0x1d0 [r8168] [ 19.232142] __dev_close_many+0x9c/0x110 [ 19.232145] __dev_change_flags+0xdd/0x210 [ 19.232147] dev_change_flags+0x21/0x60 [ 19.232150] devinet_ioctl+0x58c/0x6c0 [ 19.232153] inet_ioctl+0x143/0x220 [ 19.232156] ? dev_get_by_name_rcu+0x73/0x90 [ 19.232158] ? dev_get_by_name_rcu+0x73/0x90 [ 19.232160] ? dev_ioctl+0x355/0x570 [ 19.232162] sock_do_ioctl+0x43/0x140 [ 19.232165] sock_ioctl+0x19e/0x320 [ 19.232168] do_vfs_ioctl+0xa4/0x630 [ 19.232171] ? handle_mm_fault+0x106/0x230 [ 19.232173] ksys_ioctl+0x60/0x90 [ 19.232176] __x64_sys_ioctl+0x16/0x20 [ 19.232178] do_syscall_64+0x53/0x110 [ 19.232181] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 19.232183] RIP: 0033:0x7f9c5074d427 [ 19.232185] Code: 00 00 90 48 8b 05 69 aa 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 39 aa 0c 00 f7 d8 64 89 01 48 [ 19.232185] RSP: 002b:00007fffb5623928 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 [ 19.232187] RAX: ffffffffffffffda RBX: 00007fffb5623930 RCX: 00007f9c5074d427 [ 19.232187] RDX: 00007fffb5623930 RSI: 0000000000008914 RDI: 0000000000000005 [ 19.232188] RBP: 00007fffb56239f0 R08: 0000000000000008 R09: 0000000000000000 [ 19.232189] R10: fffffffffffffe07 R11: 0000000000000206 R12: 00000000fffffffe [ 19.232189] R13: 0000000000000005 R14: 0000000000000000 R15: 0000000000000000 [ 19.232192] ---[ end trace 0000000000000002 ]--- [ 19.240041] EtherCAT 0: 0 slave(s) responding on main device. [ 19.256042] EtherCAT 0: Link state of ecm0 changed to DOWN. [ 19.267396] enp8s0: 0xffffb3d2c2985000, 04:d9:f5:cd:bc:0f, IRQ 44 [ 19.396050] ------------[ cut here ]------------ [ 19.396061] WARNING: CPU: 15 PID: 1438 at kernel/workqueue.c:2920 __flush_work.cold.50+0x1f/0x29 [ 19.396061] Modules linked in: appletalk psnap llc ax25 nls_ascii nls_cp437 vfat fat joydev snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec_hdmi sg snd_hda_intel edac_mce_amd snd_hda_codec snd_hda_core snd_hwdep pcc_cpufreq kvm_amd eeepc_wmi snd_pcm asus_wmi snd_timer sparse_keymap snd ccp kvm soundcore irqbypass rng_core crct10dif_pclmul sp5100_tco k10temp evdev rfkill crc32_pclmul video ghash_clmulni_intel acpi_cpufreq pcspkr wmi_bmof ec_generic(OE) ec_master(OE) ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic fscrypto ecb sr_mod cdrom hid_generic usbhid hid sd_mod amdkfd amdgpu chash gpu_sched i2c_algo_bit ttm drm_kms_helper ahci crc32c_intel xhci_pci libahci xhci_hcd libata drm aesni_intel aes_x86_64 nvme crypto_simd usbcore mfd_core r8168(OE) cryptd scsi_mod glue_helper [ 19.396095] nvme_core i2c_piix4 usb_common wmi gpio_amdpt gpio_generic button [ 19.396101] CPU: 15 PID: 1438 Comm: ifconfig Tainted: G W OE 4.19.0-14-rt-amd64 #1 Debian 4.19.171-2 [ 19.396102] Hardware name: System manufacturer System Product Name/PRIME B450M-K, BIOS 1804 07/29/2019 [ 19.396104] RIP: 0010:__flush_work.cold.50+0x1f/0x29 [ 19.396106] Code: 9a a5 93 5b 8b 10 e9 7c 50 00 00 48 c7 c7 c0 1a a4 93 e8 70 50 00 00 0f 0b e9 ea 8c 97 ff 48 c7 c7 c0 1a a4 93 e8 5d 50 00 00 <0f> 0b 45 31 ed e9 d4 8c 97 ff 48 c7 c7 c0 1a a4 93 e8 47 50 00 00 [ 19.396107] RSP: 0018:ffffb3d2c974fab8 EFLAGS: 00010246 [ 19.396109] RAX: 0000000000000024 RBX: ffff9ed2fab66db0 RCX: 0000000000000000 [ 19.396109] RDX: 0000000000000000 RSI: ffffffff93a89673 RDI: 00000000ffffffff [ 19.396110] RBP: ffff9ed2fab66db0 R08: 0000000000000034 R09: 0000000000000004 [ 19.396111] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001 [ 19.396112] R13: 0000000000000001 R14: ffffffff92c9b7c0 R15: 00000000ffffff9d [ 19.396113] FS: 00007f67f04d4540(0000) GS:ffff9ed30e9c0000(0000) knlGS:0000000000000000 [ 19.396114] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 19.396115] CR2: 00007f9245a82298 CR3: 00000004047d4000 CR4: 00000000003406e0 [ 19.396116] Call Trace: [ 19.396122] ? _synchronize_rcu_expedited+0x25a/0x300 [ 19.396125] ? get_page_from_freelist+0x33f/0x1530 [ 19.396129] ? work_busy+0x90/0x90 [ 19.396131] __cancel_work_timer+0x10a/0x190 [ 19.396133] ? migrate_enable+0x118/0x390 [ 19.396135] ? cpumask_next+0x16/0x20 [ 19.396138] ? pfifo_fast_reset+0xdd/0x130 [ 19.396143] rtl8168_close+0x41/0x1d0 [r8168] [ 19.396147] __dev_close_many+0x9c/0x110 [ 19.396150] __dev_change_flags+0xdd/0x210 [ 19.396152] dev_change_flags+0x21/0x60 [ 19.396154] devinet_ioctl+0x58c/0x6c0 [ 19.396157] inet_ioctl+0x143/0x220 [ 19.396160] ? dev_get_by_name_rcu+0x73/0x90 [ 19.396162] ? dev_get_by_name_rcu+0x73/0x90 [ 19.396164] ? dev_ioctl+0x355/0x570 [ 19.396166] sock_do_ioctl+0x43/0x140 [ 19.396169] sock_ioctl+0x19e/0x320 [ 19.396172] do_vfs_ioctl+0xa4/0x630 [ 19.396176] ? handle_mm_fault+0x106/0x230 [ 19.396178] ksys_ioctl+0x60/0x90 [ 19.396180] __x64_sys_ioctl+0x16/0x20 [ 19.396182] do_syscall_64+0x53/0x110 [ 19.396185] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 19.396187] RIP: 0033:0x7f67f0402427 [ 19.396189] Code: 00 00 90 48 8b 05 69 aa 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 39 aa 0c 00 f7 d8 64 89 01 48 [ 19.396189] RSP: 002b:00007ffd2d7819c8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [ 19.396191] RAX: ffffffffffffffda RBX: 00007ffd2d7819d0 RCX: 00007f67f0402427 [ 19.396192] RDX: 00007ffd2d7819d0 RSI: 0000000000008914 RDI: 0000000000000005 [ 19.396192] RBP: 00007ffd2d781a90 R08: 0000000000000008 R09: 0000000000000000 [ 19.396193] R10: fffffffffffffe07 R11: 0000000000000202 R12: 00000000fffffffe [ 19.396193] R13: 0000000000000005 R14: 0000000000000000 R15: 0000000000000000 [ 19.396196] ---[ end trace 0000000000000003 ]--- [ 19.751012] enp8s0: 0xffffb3d2c2985000, 04:d9:f5:cd:bc:0f, IRQ 44 [ 21.870708] r8168: enp8s0: link up [ 21.876027] EtherCAT 0: Link state of ecm0 changed to UP. [ 21.888057] EtherCAT 0: 1 slave(s) responding on main device. [ 21.888060] EtherCAT 0: Slave states on main device: PREOP. [ 21.888228] EtherCAT 0: Scanning bus. [ 21.973731] EtherCAT 0: Bus scanning completed in 84 ms. [ 21.973732] EtherCAT 0: Using slave 0 as DC reference clock. [ 41.746457] EtherCAT: Requesting master 0... [ 41.746461] EtherCAT: Successfully requested master 0. [ 41.968400] EtherCAT 0: Domain0: Logical address 0x00000000, 28 byte, expected working counter 3. [ 41.968404] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 28 byte, type LRW. [ 41.968414] EtherCAT 0: Master thread exited. [ 41.968416] EtherCAT 0: Starting EtherCAT-OP thread. [ 41.968458] EtherCAT WARNING 0: 6 datagrams TIMED OUT! [ 42.287872] EtherCAT WARNING 0-0: Slave does not support changing the PDO mapping! [ 42.287874] EtherCAT WARNING 0-0: [ 42.287875] Currently mapped PDO entries: [ 42.287876] 0x0086:00/16 [ 42.287876] [ 42.287877] 0x0024:00/32 [ 42.287877] . Entries to map: [ 42.287878] 0x0086:01/16 [ 42.287879] [ 42.287880] 0x0018:01/32 [ 42.287882] EtherCAT WARNING 0-0: Slave does not support changing the PDO mapping! [ 42.287882] EtherCAT WARNING 0-0: [ 42.287882] Currently mapped PDO entries: [ 42.287883] 0x0086:00/16 [ 42.287883] [ 42.287883] 0x0024:00/32 [ 42.287884] . Entries to map: [ 42.287884] 0x0086:02/16 [ 42.287885] [ 42.287885] 0x0018:02/32 [ 42.287888] EtherCAT WARNING 0-0: Slave does not support changing the PDO mapping! [ 42.287889] EtherCAT WARNING 0-0: [ 42.287889] Currently mapped PDO entries: [ 42.287889] 0x0087:00/16 [ 42.287889] [ 42.287890] 0x0033:00/32 [ 42.287890] . Entries to map: [ 42.287891] 0x0087:01/16 [ 42.287891] [ 42.287891] 0x0033:01/32 [ 42.287891] [ 42.287892] 0x0054:01/16 [ 42.287893] EtherCAT WARNING 0-0: Slave does not support changing the PDO mapping! [ 42.287894] EtherCAT WARNING 0-0: [ 42.287894] Currently mapped PDO entries: [ 42.287894] 0x0087:00/16 [ 42.287894] [ 42.287895] 0x0033:00/32 [ 42.287895] . Entries to map: [ 42.287896] 0x0087:02/16 [ 42.287896] [ 42.287896] 0x0033:02/32 [ 42.287896] [ 42.287897] 0x0054:02/16 [ 42.414868] EtherCAT 0: Domain 0: Working counter changed to 3/3 [ 42.414869] . [ 42.664021] EtherCAT 0: Slave states on main device: OP. [ 60.051865] EtherCAT 0: Domain 0: Working counter changed to 2/3 [ 60.051866] . [ 61.052867] EtherCAT 0: Domain 0: 339 working counter changes - now 3/3 [ 61.052868] . [ 69.921865] EtherCAT ERROR 0-0: AL status message 0x001A: "Synchronization error". [ 69.924865] EtherCAT 0-0: Acknowledged state SAFEOP. [ 69.926866] EtherCAT 0: Domain 0: Working counter changed to 0/3 [ 69.926867] . [ 70.182867] EtherCAT WARNING 0-0: Slave does not support changing the PDO mapping! [ 70.182869] EtherCAT WARNING 0-0: [ 70.182869] Currently mapped PDO entries: [ 70.182870] 0x0086:00/16 [ 70.182871] [ 70.182872] 0x0024:00/32 [ 70.182873] . Entries to map: [ 70.182874] 0x0086:01/16 [ 70.182874] [ 70.182875] 0x0018:01/32 [ 70.182877] EtherCAT WARNING 0-0: Slave does not support changing the PDO mapping! [ 70.182877] EtherCAT WARNING 0-0: [ 70.182878] Currently mapped PDO entries: [ 70.182879] 0x0086:00/16 [ 70.182880] [ 70.182880] 0x0024:00/32 [ 70.182881] . Entries to map: [ 70.182882] 0x0086:02/16 [ 70.182882] [ 70.182883] 0x0018:02/32 [ 70.182887] EtherCAT WARNING 0-0: Slave does not support changing the PDO mapping! [ 70.182888] EtherCAT WARNING 0-0: [ 70.182888] Currently mapped PDO entries: [ 70.182888] 0x0087:00/16 [ 70.182888] [ 70.182889] 0x0033:00/32 [ 70.182889] . Entries to map: [ 70.182890] 0x0087:01/16 [ 70.182890] [ 70.182890] 0x0033:01/32 [ 70.182891] [ 70.182891] 0x0054:01/16 [ 70.182892] EtherCAT WARNING 0-0: Slave does not support changing the PDO mapping! [ 70.182893] EtherCAT WARNING 0-0: [ 70.182893] Currently mapped PDO entries: [ 70.182893] 0x0087:00/16 [ 70.182894] [ 70.182894] 0x0033:00/32 [ 70.182894] . Entries to map: [ 70.182895] 0x0087:02/16 [ 70.182895] [ 70.182895] 0x0033:02/32 [ 70.182896] [ 70.182896] 0x0054:02/16 [ 70.928864] EtherCAT 0: Domain 0: Working counter changed to 3/3 [ 70.928866] . avc@debian:~$