[ 0.185309] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME LTR] [ 0.185415] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability] [ 0.185422] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.185633] PCI host bridge to bus 0000:00 [ 0.185635] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.185636] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.185637] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.185638] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.185639] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.185640] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.185641] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window] [ 0.185642] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window] [ 0.185643] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.185649] pci 0000:00:00.0: [1022:1450] type 00 class 0x060000 [ 0.185717] pci 0000:00:00.2: [1022:1451] type 00 class 0x080600 [ 0.185801] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000 [ 0.185857] pci 0000:00:01.1: [1022:1453] type 01 class 0x060400 [ 0.188012] pci 0000:00:01.1: enabling Extended Tags [ 0.188089] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.188187] pci 0000:00:01.3: [1022:1453] type 01 class 0x060400 [ 0.188971] pci 0000:00:01.3: enabling Extended Tags [ 0.189046] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold [ 0.189141] pci 0000:00:02.0: [1022:1452] type 00 class 0x060000 [ 0.189211] pci 0000:00:03.0: [1022:1452] type 00 class 0x060000 [ 0.189266] pci 0000:00:03.1: [1022:1453] type 01 class 0x060400 [ 0.190104] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold [ 0.190209] pci 0000:00:04.0: [1022:1452] type 00 class 0x060000 [ 0.190284] pci 0000:00:07.0: [1022:1452] type 00 class 0x060000 [ 0.190339] pci 0000:00:07.1: [1022:1454] type 01 class 0x060400 [ 0.190953] pci 0000:00:07.1: enabling Extended Tags [ 0.191026] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold [ 0.191123] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000 [ 0.191179] pci 0000:00:08.1: [1022:1454] type 01 class 0x060400 [ 0.191209] pci 0000:00:08.1: enabling Extended Tags [ 0.191937] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold [ 0.191937] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 [ 0.191937] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 [ 0.191937] pci 0000:00:18.0: [1022:1460] type 00 class 0x060000 [ 0.191937] pci 0000:00:18.1: [1022:1461] type 00 class 0x060000 [ 0.191937] pci 0000:00:18.2: [1022:1462] type 00 class 0x060000 [ 0.191937] pci 0000:00:18.3: [1022:1463] type 00 class 0x060000 [ 0.191937] pci 0000:00:18.4: [1022:1464] type 00 class 0x060000 [ 0.191937] pci 0000:00:18.5: [1022:1465] type 00 class 0x060000 [ 0.191937] pci 0000:00:18.6: [1022:1466] type 00 class 0x060000 [ 0.191937] pci 0000:00:18.7: [1022:1467] type 00 class 0x060000 [ 0.191937] pci 0000:01:00.0: [144d:a808] type 00 class 0x010802 [ 0.191937] pci 0000:01:00.0: reg 0x10: [mem 0xfcf00000-0xfcf03fff 64bit] [ 0.191937] pci 0000:00:01.1: PCI bridge to [bus 01] [ 0.191937] pci 0000:00:01.1: bridge window [mem 0xfcf00000-0xfcffffff] [ 0.191937] pci 0000:02:00.0: [1022:43d5] type 00 class 0x0c0330 [ 0.191937] pci 0000:02:00.0: reg 0x10: [mem 0xfcda0000-0xfcda7fff 64bit] [ 0.191937] pci 0000:02:00.0: enabling Extended Tags [ 0.191937] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.191937] pci 0000:02:00.1: [1022:43c8] type 00 class 0x010601 [ 0.191937] pci 0000:02:00.1: reg 0x24: [mem 0xfcd80000-0xfcd9ffff] [ 0.191937] pci 0000:02:00.1: reg 0x30: [mem 0xfcd00000-0xfcd7ffff pref] [ 0.191937] pci 0000:02:00.1: enabling Extended Tags [ 0.191937] pci 0000:02:00.1: PME# supported from D3hot D3cold [ 0.191937] pci 0000:02:00.2: [1022:43c6] type 01 class 0x060400 [ 0.191937] pci 0000:02:00.2: enabling Extended Tags [ 0.191937] pci 0000:02:00.2: PME# supported from D3hot D3cold [ 0.191937] pci 0000:00:01.3: PCI bridge to [bus 02-08] [ 0.191937] pci 0000:00:01.3: bridge window [io 0xf000-0xffff] [ 0.191937] pci 0000:00:01.3: bridge window [mem 0xfcc00000-0xfcdfffff] [ 0.191937] pci 0000:03:00.0: [1022:43c7] type 01 class 0x060400 [ 0.191937] pci 0000:03:00.0: enabling Extended Tags [ 0.191937] pci 0000:03:00.0: PME# supported from D3hot D3cold [ 0.191937] pci 0000:03:04.0: [1022:43c7] type 01 class 0x060400 [ 0.191937] pci 0000:03:04.0: enabling Extended Tags [ 0.191937] pci 0000:03:04.0: PME# supported from D3hot D3cold [ 0.191937] pci 0000:03:05.0: [1022:43c7] type 01 class 0x060400 [ 0.191937] pci 0000:03:05.0: enabling Extended Tags [ 0.191937] pci 0000:03:05.0: PME# supported from D3hot D3cold [ 0.191937] pci 0000:03:06.0: [1022:43c7] type 01 class 0x060400 [ 0.191937] pci 0000:03:06.0: enabling Extended Tags [ 0.191937] pci 0000:03:06.0: PME# supported from D3hot D3cold [ 0.191937] pci 0000:03:07.0: [1022:43c7] type 01 class 0x060400 [ 0.191937] pci 0000:03:07.0: enabling Extended Tags [ 0.191937] pci 0000:03:07.0: PME# supported from D3hot D3cold [ 0.191937] pci 0000:02:00.2: PCI bridge to [bus 03-08] [ 0.191937] pci 0000:02:00.2: bridge window [io 0xf000-0xffff] [ 0.191937] pci 0000:02:00.2: bridge window [mem 0xfcc00000-0xfccfffff] [ 0.191937] pci 0000:03:00.0: PCI bridge to [bus 04] [ 0.191937] pci 0000:03:04.0: PCI bridge to [bus 05] [ 0.191937] pci 0000:03:05.0: PCI bridge to [bus 06] [ 0.191937] pci 0000:03:06.0: PCI bridge to [bus 07] [ 0.191937] pci 0000:08:00.0: [10ec:8168] type 00 class 0x020000 [ 0.191937] pci 0000:08:00.0: reg 0x10: [io 0xf000-0xf0ff] [ 0.191937] pci 0000:08:00.0: reg 0x18: [mem 0xfcc04000-0xfcc04fff 64bit] [ 0.192022] pci 0000:08:00.0: reg 0x20: [mem 0xfcc00000-0xfcc03fff 64bit] [ 0.192149] pci 0000:08:00.0: supports D1 D2 [ 0.192149] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.192309] pci 0000:03:07.0: PCI bridge to [bus 08] [ 0.192313] pci 0000:03:07.0: bridge window [io 0xf000-0xffff] [ 0.192315] pci 0000:03:07.0: bridge window [mem 0xfcc00000-0xfccfffff] [ 0.192404] pci 0000:09:00.0: [1022:1470] type 01 class 0x060400 [ 0.192421] pci 0000:09:00.0: reg 0x10: [mem 0xfcb00000-0xfcb03fff] [ 0.192487] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold [ 0.192571] pci 0000:00:03.1: PCI bridge to [bus 09-0b] [ 0.192574] pci 0000:00:03.1: bridge window [io 0xe000-0xefff] [ 0.192575] pci 0000:00:03.1: bridge window [mem 0xfca00000-0xfcbfffff] [ 0.192577] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.192612] pci 0000:0a:00.0: [1022:1471] type 01 class 0x060400 [ 0.192689] pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold [ 0.192757] pci 0000:09:00.0: PCI bridge to [bus 0a-0b] [ 0.192761] pci 0000:09:00.0: bridge window [io 0xe000-0xefff] [ 0.192763] pci 0000:09:00.0: bridge window [mem 0xfca00000-0xfcafffff] [ 0.192766] pci 0000:09:00.0: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.192799] pci 0000:0b:00.0: [1002:687f] type 00 class 0x030000 [ 0.192822] pci 0000:0b:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.192831] pci 0000:0b:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.192837] pci 0000:0b:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 0.192842] pci 0000:0b:00.0: reg 0x24: [mem 0xfca00000-0xfca7ffff] [ 0.192848] pci 0000:0b:00.0: reg 0x30: [mem 0xfca80000-0xfca9ffff pref] [ 0.192860] pci 0000:0b:00.0: BAR 0: assigned to efifb [ 0.192904] pci 0000:0b:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.192972] pci 0000:0b:00.1: [1002:aaf8] type 00 class 0x040300 [ 0.192987] pci 0000:0b:00.1: reg 0x10: [mem 0xfcaa0000-0xfcaa3fff] [ 0.193059] pci 0000:0b:00.1: PME# supported from D1 D2 D3hot D3cold [ 0.193135] pci 0000:0a:00.0: PCI bridge to [bus 0b] [ 0.193139] pci 0000:0a:00.0: bridge window [io 0xe000-0xefff] [ 0.193141] pci 0000:0a:00.0: bridge window [mem 0xfca00000-0xfcafffff] [ 0.193145] pci 0000:0a:00.0: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.193300] pci 0000:0c:00.0: [1022:145a] type 00 class 0x130000 [ 0.193325] pci 0000:0c:00.0: enabling Extended Tags [ 0.193385] pci 0000:0c:00.2: [1022:1456] type 00 class 0x108000 [ 0.193398] pci 0000:0c:00.2: reg 0x18: [mem 0xfc800000-0xfc8fffff] [ 0.193405] pci 0000:0c:00.2: reg 0x24: [mem 0xfc900000-0xfc901fff] [ 0.193410] pci 0000:0c:00.2: enabling Extended Tags [ 0.193473] pci 0000:0c:00.3: [1022:145f] type 00 class 0x0c0330 [ 0.193484] pci 0000:0c:00.3: reg 0x10: [mem 0xfc700000-0xfc7fffff 64bit] [ 0.193502] pci 0000:0c:00.3: enabling Extended Tags [ 0.193527] pci 0000:0c:00.3: PME# supported from D0 D3hot D3cold [ 0.193580] pci 0000:00:07.1: PCI bridge to [bus 0c] [ 0.193583] pci 0000:00:07.1: bridge window [mem 0xfc700000-0xfc9fffff] [ 0.194364] pci 0000:0d:00.0: [1022:1455] type 00 class 0x130000 [ 0.194390] pci 0000:0d:00.0: enabling Extended Tags [ 0.194455] pci 0000:0d:00.2: [1022:7901] type 00 class 0x010601 [ 0.194482] pci 0000:0d:00.2: reg 0x24: [mem 0xfce08000-0xfce08fff] [ 0.194488] pci 0000:0d:00.2: enabling Extended Tags [ 0.194515] pci 0000:0d:00.2: PME# supported from D3hot D3cold [ 0.194559] pci 0000:0d:00.3: [1022:1457] type 00 class 0x040300 [ 0.194569] pci 0000:0d:00.3: reg 0x10: [mem 0xfce00000-0xfce07fff] [ 0.194586] pci 0000:0d:00.3: enabling Extended Tags [ 0.194611] pci 0000:0d:00.3: PME# supported from D0 D3hot D3cold [ 0.194665] pci 0000:00:08.1: PCI bridge to [bus 0d] [ 0.194669] pci 0000:00:08.1: bridge window [mem 0xfce00000-0xfcefffff] [ 0.194929] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0 [ 0.194968] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0 [ 0.195001] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0 [ 0.195044] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0 [ 0.195083] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0 [ 0.195113] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0 [ 0.195144] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0 [ 0.195175] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0 [ 0.196019] pci 0000:0b:00.0: vgaarb: setting as boot VGA device [ 0.196019] pci 0000:0b:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.196021] pci 0000:0b:00.0: vgaarb: bridge control possible [ 0.196021] vgaarb: loaded [ 0.196069] pps_core: LinuxPPS API ver. 1 registered [ 0.196069] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.196071] PTP clock support registered [ 0.196076] EDAC MC: Ver: 3.0.0 [ 0.196162] Registered efivars operations [ 0.196162] PCI: Using ACPI for IRQ routing [ 0.201564] PCI: pci_cache_line_size set to 64 bytes [ 0.201628] e820: reserve RAM buffer [mem 0x09e10000-0x0bffffff] [ 0.201629] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff] [ 0.201630] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff] [ 0.201630] e820: reserve RAM buffer [mem 0xda0e0000-0xdbffffff] [ 0.201631] e820: reserve RAM buffer [mem 0xda370000-0xdbffffff] [ 0.201632] e820: reserve RAM buffer [mem 0xde000000-0xdfffffff] [ 0.201633] e820: reserve RAM buffer [mem 0x41f380000-0x41fffffff] [ 0.201724] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.201724] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.205057] clocksource: Switched to clocksource tsc-early [ 0.213004] VFS: Disk quotas dquot_6.6.0 [ 0.213023] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.213148] AppArmor: AppArmor Filesystem Enabled [ 0.213163] pnp: PnP ACPI init [ 0.213280] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.213284] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.213342] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.213455] system 00:02: [io 0x0300-0x030f] has been reserved [ 0.213456] system 00:02: [io 0x0230-0x023f] has been reserved [ 0.213457] system 00:02: [io 0x0290-0x029f] has been reserved [ 0.213459] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.213648] pnp 00:03: [dma 0 disabled] [ 0.213675] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.213822] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.213823] system 00:04: [io 0x040b] has been reserved [ 0.213823] system 00:04: [io 0x04d6] has been reserved [ 0.213824] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 0.213825] system 00:04: [io 0x0c14] has been reserved [ 0.213826] system 00:04: [io 0x0c50-0x0c51] has been reserved [ 0.213827] system 00:04: [io 0x0c52] has been reserved [ 0.213828] system 00:04: [io 0x0c6c] has been reserved [ 0.213828] system 00:04: [io 0x0c6f] has been reserved [ 0.213829] system 00:04: [io 0x0cd0-0x0cd1] has been reserved [ 0.213830] system 00:04: [io 0x0cd2-0x0cd3] has been reserved [ 0.213831] system 00:04: [io 0x0cd4-0x0cd5] has been reserved [ 0.213833] system 00:04: [io 0x0cd6-0x0cd7] has been reserved [ 0.213834] system 00:04: [io 0x0cd8-0x0cdf] has been reserved [ 0.213838] system 00:04: [io 0x0800-0x089f] has been reserved [ 0.213839] system 00:04: [io 0x0b00-0x0b0f] has been reserved [ 0.213840] system 00:04: [io 0x0b20-0x0b3f] has been reserved [ 0.213841] system 00:04: [io 0x0900-0x090f] has been reserved [ 0.213843] system 00:04: [io 0x0910-0x091f] has been reserved [ 0.213845] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.213846] system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved [ 0.213847] system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved [ 0.213848] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.213849] system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved [ 0.213850] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.213851] system 00:04: [mem 0xff000000-0xffffffff] has been reserved [ 0.213854] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.214149] pnp: PnP ACPI: found 5 devices [ 0.219965] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.219977] pci 0000:00:01.1: PCI bridge to [bus 01] [ 0.219980] pci 0000:00:01.1: bridge window [mem 0xfcf00000-0xfcffffff] [ 0.219985] pci 0000:03:00.0: PCI bridge to [bus 04] [ 0.219993] pci 0000:03:04.0: PCI bridge to [bus 05] [ 0.220002] pci 0000:03:05.0: PCI bridge to [bus 06] [ 0.220010] pci 0000:03:06.0: PCI bridge to [bus 07] [ 0.220018] pci 0000:03:07.0: PCI bridge to [bus 08] [ 0.220020] pci 0000:03:07.0: bridge window [io 0xf000-0xffff] [ 0.220023] pci 0000:03:07.0: bridge window [mem 0xfcc00000-0xfccfffff] [ 0.220029] pci 0000:02:00.2: PCI bridge to [bus 03-08] [ 0.220031] pci 0000:02:00.2: bridge window [io 0xf000-0xffff] [ 0.220034] pci 0000:02:00.2: bridge window [mem 0xfcc00000-0xfccfffff] [ 0.220039] pci 0000:00:01.3: PCI bridge to [bus 02-08] [ 0.220040] pci 0000:00:01.3: bridge window [io 0xf000-0xffff] [ 0.220042] pci 0000:00:01.3: bridge window [mem 0xfcc00000-0xfcdfffff] [ 0.220046] pci 0000:0a:00.0: PCI bridge to [bus 0b] [ 0.220047] pci 0000:0a:00.0: bridge window [io 0xe000-0xefff] [ 0.220050] pci 0000:0a:00.0: bridge window [mem 0xfca00000-0xfcafffff] [ 0.220052] pci 0000:0a:00.0: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.220056] pci 0000:09:00.0: PCI bridge to [bus 0a-0b] [ 0.220057] pci 0000:09:00.0: bridge window [io 0xe000-0xefff] [ 0.220060] pci 0000:09:00.0: bridge window [mem 0xfca00000-0xfcafffff] [ 0.220062] pci 0000:09:00.0: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.220065] pci 0000:00:03.1: PCI bridge to [bus 09-0b] [ 0.220066] pci 0000:00:03.1: bridge window [io 0xe000-0xefff] [ 0.220068] pci 0000:00:03.1: bridge window [mem 0xfca00000-0xfcbfffff] [ 0.220070] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.220072] pci 0000:00:07.1: PCI bridge to [bus 0c] [ 0.220074] pci 0000:00:07.1: bridge window [mem 0xfc700000-0xfc9fffff] [ 0.220077] pci 0000:00:08.1: PCI bridge to [bus 0d] [ 0.220079] pci 0000:00:08.1: bridge window [mem 0xfce00000-0xfcefffff] [ 0.220084] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.220085] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.220085] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.220086] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.220087] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.220088] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.220088] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window] [ 0.220089] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window] [ 0.220090] pci_bus 0000:01: resource 1 [mem 0xfcf00000-0xfcffffff] [ 0.220091] pci_bus 0000:02: resource 0 [io 0xf000-0xffff] [ 0.220091] pci_bus 0000:02: resource 1 [mem 0xfcc00000-0xfcdfffff] [ 0.220092] pci_bus 0000:03: resource 0 [io 0xf000-0xffff] [ 0.220093] pci_bus 0000:03: resource 1 [mem 0xfcc00000-0xfccfffff] [ 0.220093] pci_bus 0000:08: resource 0 [io 0xf000-0xffff] [ 0.220094] pci_bus 0000:08: resource 1 [mem 0xfcc00000-0xfccfffff] [ 0.220095] pci_bus 0000:09: resource 0 [io 0xe000-0xefff] [ 0.220095] pci_bus 0000:09: resource 1 [mem 0xfca00000-0xfcbfffff] [ 0.220096] pci_bus 0000:09: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.220097] pci_bus 0000:0a: resource 0 [io 0xe000-0xefff] [ 0.220097] pci_bus 0000:0a: resource 1 [mem 0xfca00000-0xfcafffff] [ 0.220098] pci_bus 0000:0a: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.220099] pci_bus 0000:0b: resource 0 [io 0xe000-0xefff] [ 0.220099] pci_bus 0000:0b: resource 1 [mem 0xfca00000-0xfcafffff] [ 0.220100] pci_bus 0000:0b: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.220101] pci_bus 0000:0c: resource 1 [mem 0xfc700000-0xfc9fffff] [ 0.220102] pci_bus 0000:0d: resource 1 [mem 0xfce00000-0xfcefffff] [ 0.220163] NET: Registered protocol family 2 [ 0.220362] tcp_listen_portaddr_hash hash table entries: 8192 (order: 7, 524288 bytes) [ 0.220450] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.220706] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes) [ 0.221144] TCP: Hash tables configured (established 131072 bind 65536) [ 0.221239] UDP hash table entries: 8192 (order: 8, 1048576 bytes) [ 0.221387] UDP-Lite hash table entries: 8192 (order: 8, 1048576 bytes) [ 0.221583] NET: Registered protocol family 1 [ 0.221587] NET: Registered protocol family 44 [ 0.221751] pci 0000:0b:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.221758] pci 0000:0b:00.1: Linked as a consumer to 0000:0b:00.0 [ 0.221759] pci 0000:0b:00.1: D0 power state depends on 0000:0b:00.0 [ 0.221941] PCI: CLS 64 bytes, default 64 [ 0.221984] Unpacking initramfs... [ 0.729539] Freeing initrd memory: 47776K [ 0.729570] AMD-Vi: IOMMU performance counters supported [ 0.730108] iommu: Adding device 0000:00:01.0 to group 0 [ 0.730320] iommu: Adding device 0000:00:01.1 to group 1 [ 0.730501] iommu: Adding device 0000:00:01.3 to group 2 [ 0.730710] iommu: Adding device 0000:00:02.0 to group 3 [ 0.730892] iommu: Adding device 0000:00:03.0 to group 4 [ 0.731097] iommu: Adding device 0000:00:03.1 to group 5 [ 0.731277] iommu: Adding device 0000:00:04.0 to group 6 [ 0.731476] iommu: Adding device 0000:00:07.0 to group 7 [ 0.731651] iommu: Adding device 0000:00:07.1 to group 8 [ 0.731854] iommu: Adding device 0000:00:08.0 to group 9 [ 0.732026] iommu: Adding device 0000:00:08.1 to group 10 [ 0.732236] iommu: Adding device 0000:00:14.0 to group 11 [ 0.732252] iommu: Adding device 0000:00:14.3 to group 11 [ 0.732458] iommu: Adding device 0000:00:18.0 to group 12 [ 0.732475] iommu: Adding device 0000:00:18.1 to group 12 [ 0.732490] iommu: Adding device 0000:00:18.2 to group 12 [ 0.732506] iommu: Adding device 0000:00:18.3 to group 12 [ 0.732523] iommu: Adding device 0000:00:18.4 to group 12 [ 0.732537] iommu: Adding device 0000:00:18.5 to group 12 [ 0.732553] iommu: Adding device 0000:00:18.6 to group 12 [ 0.732568] iommu: Adding device 0000:00:18.7 to group 12 [ 0.732768] iommu: Adding device 0000:01:00.0 to group 13 [ 0.732971] iommu: Adding device 0000:02:00.0 to group 14 [ 0.732995] iommu: Adding device 0000:02:00.1 to group 14 [ 0.733019] iommu: Adding device 0000:02:00.2 to group 14 [ 0.733031] iommu: Adding device 0000:03:00.0 to group 14 [ 0.733043] iommu: Adding device 0000:03:04.0 to group 14 [ 0.733055] iommu: Adding device 0000:03:05.0 to group 14 [ 0.733067] iommu: Adding device 0000:03:06.0 to group 14 [ 0.733079] iommu: Adding device 0000:03:07.0 to group 14 [ 0.733100] iommu: Adding device 0000:08:00.0 to group 14 [ 0.733298] iommu: Adding device 0000:09:00.0 to group 15 [ 0.733505] iommu: Adding device 0000:0a:00.0 to group 16 [ 0.733735] iommu: Adding device 0000:0b:00.0 to group 17 [ 0.733802] iommu: Using direct mapping for device 0000:0b:00.0 [ 0.733940] iommu: Adding device 0000:0b:00.1 to group 18 [ 0.734079] iommu: Adding device 0000:0c:00.0 to group 19 [ 0.734261] iommu: Adding device 0000:0c:00.2 to group 20 [ 0.734462] iommu: Adding device 0000:0c:00.3 to group 21 [ 0.734645] iommu: Adding device 0000:0d:00.0 to group 22 [ 0.734848] iommu: Adding device 0000:0d:00.2 to group 23 [ 0.735030] iommu: Adding device 0000:0d:00.3 to group 24 [ 0.735313] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40 [ 0.735314] AMD-Vi: Extended features (0xf77ef22294ada): [ 0.735314] PPR NX GT IA GA PC GA_vAPIC [ 0.735316] AMD-Vi: Interrupt remapping enabled [ 0.735317] AMD-Vi: virtual APIC enabled [ 0.735445] AMD-Vi: Lazy IO/TLB flushing enabled [ 0.737548] amd_uncore: AMD NB counters detected [ 0.737555] amd_uncore: AMD LLC counters detected [ 0.737810] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank). [ 0.738544] Initialise system trusted keyrings [ 0.738556] Key type blacklist registered [ 0.738593] workingset: timestamp_bits=40 max_order=22 bucket_order=0 [ 0.739548] zbud: loaded [ 0.825596] Key type asymmetric registered [ 0.825597] Asymmetric key parser 'x509' registered [ 0.825604] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.825635] io scheduler noop registered [ 0.825636] io scheduler deadline registered [ 0.825656] io scheduler cfq registered (default) [ 0.825656] io scheduler mq-deadline registered [ 0.826683] pcieport 0000:00:01.1: AER enabled with IRQ 26 [ 0.827722] pcieport 0000:00:01.3: AER enabled with IRQ 27 [ 0.828672] pcieport 0000:00:03.1: AER enabled with IRQ 28 [ 0.829713] pcieport 0000:00:07.1: AER enabled with IRQ 29 [ 0.831724] pcieport 0000:00:08.1: AER enabled with IRQ 31 [ 0.833418] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.833429] efifb: probing for efifb [ 0.833437] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k [ 0.833438] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 0.833438] efifb: scrolling: redraw [ 0.833439] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.834568] Console: switching to colour frame buffer device 128x48 [ 0.835633] fb0: EFI VGA frame buffer device [ 0.835656] Monitor-Mwait will be used to enter C-1 state [ 0.837049] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.857948] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.858262] Linux agpgart interface v0.103 [ 0.858530] AMD IOMMUv2 driver by Joerg Roedel [ 0.859508] i8042: PNP: No PS/2 controller found. [ 0.859551] mousedev: PS/2 mouse device common for all mice [ 0.859584] rtc_cmos 00:01: RTC can wake from S4 [ 0.859852] rtc_cmos 00:01: registered as rtc0 [ 0.859862] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.860140] NET: Registered protocol family 10 [ 0.864251] Segment Routing with IPv6 [ 0.864266] mip6: Mobile IPv6 [ 0.864268] NET: Registered protocol family 17 [ 0.864293] mpls_gso: MPLS GSO support [ 0.865092] mce: Using 23 MCE banks [ 0.865120] microcode: CPU0: patch_level=0x0800820d [ 0.865126] microcode: CPU1: patch_level=0x0800820d [ 0.865131] microcode: CPU2: patch_level=0x0800820d [ 0.865136] microcode: CPU3: patch_level=0x0800820d [ 0.865143] microcode: CPU4: patch_level=0x0800820d [ 0.865150] microcode: CPU5: patch_level=0x0800820d [ 0.865157] microcode: CPU6: patch_level=0x0800820d [ 0.865162] microcode: CPU7: patch_level=0x0800820d [ 0.865165] microcode: CPU8: patch_level=0x0800820d [ 0.865169] microcode: CPU9: patch_level=0x0800820d [ 0.865174] microcode: CPU10: patch_level=0x0800820d [ 0.865178] microcode: CPU11: patch_level=0x0800820d [ 0.865183] microcode: CPU12: patch_level=0x0800820d [ 0.865189] microcode: CPU13: patch_level=0x0800820d [ 0.865194] microcode: CPU14: patch_level=0x0800820d [ 0.865203] microcode: CPU15: patch_level=0x0800820d [ 0.865235] microcode: Microcode Update Driver: v2.2. [ 0.865243] sched_clock: Marking stable (905223255, -39992645)->(865927762, -697152) [ 0.865622] registered taskstats version 1 [ 0.865629] Loading compiled-in X.509 certificates [ 0.885784] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 0.885799] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9' [ 0.885828] zswap: loaded using pool lzo/zbud [ 0.886196] AppArmor: AppArmor sha1 policy hashing enabled [ 0.886657] rtc_cmos 00:01: setting system clock to 2021-03-21 11:24:21 UTC (1616325861) [ 1.087575] Freeing unused kernel image memory: 1548K [ 1.087577] Write protecting the kernel read-only data: 16384k [ 1.089723] Freeing unused kernel image memory: 2032K [ 1.089877] Freeing unused kernel image memory: 764K [ 1.095255] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.095256] Run /init as init process [ 1.148811] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.149001] ACPI: Power Button [PWRB] [ 1.149836] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.164031] ACPI: Power Button [PWRF] [ 1.168646] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 1.172078] SCSI subsystem initialized [ 1.172723] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 1.172726] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection [ 1.173462] ACPI: bus type USB registered [ 1.174046] usbcore: registered new interface driver usbfs [ 1.174415] usbcore: registered new interface driver hub [ 1.174768] usbcore: registered new device driver usb [ 1.176176] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 1.176356] nvme nvme0: pci function 0000:01:00.0 [ 1.184152] libata version 3.00 loaded. [ 1.184917] cryptd: max_cpu_qlen set to 1000 [ 1.189403] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 1.189468] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1 [ 1.195933] libphy: r8169: probed [ 1.198114] ahci 0000:02:00.1: version 3.0 [ 1.198171] r8169 0000:08:00.0 eth0: RTL8168h/8111h, 04:d9:f5:cd:bc:0f, XID 54100800, IRQ 46 [ 1.198174] r8169 0000:08:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.198599] ahci 0000:02:00.1: SSS flag set, parallel bus scan disabled [ 1.198634] ahci 0000:02:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode [ 1.198636] ahci 0000:02:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst [ 1.200270] AVX2 version of gcm_enc/dec engaged. [ 1.200272] AES CTR mode by8 optimization enabled [ 1.209847] r8169 0000:08:00.0 enp8s0: renamed from eth0 [ 1.215999] scsi host0: ahci [ 1.217338] scsi host1: ahci [ 1.218838] scsi host2: ahci [ 1.218943] scsi host3: ahci [ 1.219057] scsi host4: ahci [ 1.219159] scsi host5: ahci [ 1.219254] scsi host6: ahci [ 1.219352] scsi host7: ahci [ 1.219476] ata1: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80100 irq 47 [ 1.219478] ata2: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80180 irq 47 [ 1.219479] ata3: DUMMY [ 1.219480] ata4: DUMMY [ 1.219481] ata5: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80300 irq 47 [ 1.219483] ata6: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80380 irq 47 [ 1.219484] ata7: DUMMY [ 1.219485] ata8: DUMMY [ 1.219707] ahci 0000:0d:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 1.219709] ahci 0000:0d:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part [ 1.219897] scsi host8: ahci [ 1.220007] ata9: SATA max UDMA/133 abar m4096@0xfce08000 port 0xfce08100 irq 49 [ 1.244792] xhci_hcd 0000:02:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410 [ 1.245339] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.245341] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.245342] usb usb1: Product: xHCI Host Controller [ 1.245343] usb usb1: Manufacturer: Linux 4.19.0-14-rt-amd64 xhci-hcd [ 1.245343] usb usb1: SerialNumber: 0000:02:00.0 [ 1.245456] hub 1-0:1.0: USB hub found [ 1.245469] hub 1-0:1.0: 10 ports detected [ 1.251447] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 1.251450] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2 [ 1.251452] xhci_hcd 0000:02:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 1.251498] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.251514] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 1.251515] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.251516] usb usb2: Product: xHCI Host Controller [ 1.251516] usb usb2: Manufacturer: Linux 4.19.0-14-rt-amd64 xhci-hcd [ 1.251517] usb usb2: SerialNumber: 0000:02:00.0 [ 1.251578] hub 2-0:1.0: USB hub found [ 1.251584] hub 2-0:1.0: 4 ports detected [ 1.254106] xhci_hcd 0000:0c:00.3: xHCI Host Controller [ 1.254109] xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 3 [ 1.254204] xhci_hcd 0000:0c:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x0000000000000410 [ 1.254640] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.254641] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.254642] usb usb3: Product: xHCI Host Controller [ 1.254643] usb usb3: Manufacturer: Linux 4.19.0-14-rt-amd64 xhci-hcd [ 1.254643] usb usb3: SerialNumber: 0000:0c:00.3 [ 1.254712] hub 3-0:1.0: USB hub found [ 1.254718] hub 3-0:1.0: 4 ports detected [ 1.254859] xhci_hcd 0000:0c:00.3: xHCI Host Controller [ 1.254861] xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 4 [ 1.254863] xhci_hcd 0000:0c:00.3: Host supports USB 3.0 SuperSpeed [ 1.254873] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.254891] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 1.254892] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.254892] usb usb4: Product: xHCI Host Controller [ 1.254893] usb usb4: Manufacturer: Linux 4.19.0-14-rt-amd64 xhci-hcd [ 1.254893] usb usb4: SerialNumber: 0000:0c:00.3 [ 1.254955] hub 4-0:1.0: USB hub found [ 1.254960] hub 4-0:1.0: 4 ports detected [ 1.299838] [drm] amdgpu kernel modesetting enabled. [ 1.306755] Parsing CRAT table with 1 nodes [ 1.306760] Ignoring ACPI CRAT on non-APU system [ 1.306762] Virtual CRAT table created for CPU [ 1.306762] Parsing CRAT table with 1 nodes [ 1.306764] Creating topology SYSFS entries [ 1.306773] Topology: Add CPU node [ 1.306773] Finished initializing topology [ 1.306822] kfd kfd: Initialized module [ 1.306994] checking generic (e0000000 300000) vs hw (e0000000 10000000) [ 1.306994] fb: switching to amdgpudrmfb from EFI VGA [ 1.307012] Console: switching to colour dummy device 80x25 [ 1.307234] [drm] initializing kernel modesetting (VEGA10 0x1002:0x687F 0x1849:0x1001 0xC3). [ 1.307241] [drm] register mmio base: 0xFCA00000 [ 1.307242] [drm] register mmio size: 524288 [ 1.307250] [drm] add ip block number 0 [ 1.307250] [drm] add ip block number 1 [ 1.307251] [drm] add ip block number 2 [ 1.307251] [drm] add ip block number 3 [ 1.307252] [drm] add ip block number 4 [ 1.307252] [drm] add ip block number 5 [ 1.307253] [drm] add ip block number 6 [ 1.307253] [drm] add ip block number 7 [ 1.307254] [drm] add ip block number 8 [ 1.307254] [drm] add ip block number 9 [ 1.307271] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_gpu_info.bin [ 1.307282] [drm] UVD(0) is enabled in VM mode [ 1.307283] [drm] UVD(0) ENC is enabled in VM mode [ 1.307283] [drm] VCE enabled in VM mode [ 1.307298] amdgpu 0000:0b:00.0: No more image in the PCI ROM [ 1.307314] ATOM BIOS: 113-TIC46561-001 [ 1.307335] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit [ 1.307341] amdgpu 0000:0b:00.0: VRAM: 8176M 0x000000F400000000 - 0x000000F5FEFFFFFF (8176M used) [ 1.307342] amdgpu 0000:0b:00.0: GART: 512M 0x000000F600000000 - 0x000000F61FFFFFFF [ 1.307345] [drm] Detected VRAM RAM=8176M, BAR=256M [ 1.307345] [drm] RAM width 2048bits HBM [ 1.307378] [TTM] Zone kernel: Available graphics memory: 8208992 kiB [ 1.307378] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 1.307379] [TTM] Initializing pool allocator [ 1.307382] [TTM] Initializing DMA pool allocator [ 1.307405] [drm] amdgpu: 8176M of VRAM memory ready [ 1.307406] [drm] amdgpu: 8176M of GTT memory ready. [ 1.307413] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 1.307520] [drm] PCIE GART of 512M enabled (table at 0x000000F400900000). [ 1.307688] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_sos.bin [ 1.307707] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_asd.bin [ 1.307765] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_acg_smc.bin [ 1.307792] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_pfp.bin [ 1.307804] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_me.bin [ 1.307817] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_ce.bin [ 1.307828] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_rlc.bin [ 1.307885] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_mec.bin [ 1.307944] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_mec2.bin [ 1.308657] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_sdma.bin [ 1.308672] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_sdma1.bin [ 1.308673] [drm] use_doorbell being set to: [true] [ 1.308705] [drm] use_doorbell being set to: [true] [ 1.308820] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_uvd.bin [ 1.308822] [drm] Found UVD firmware Version: 1.87 Family ID: 17 [ 1.308825] [drm] PSP loading UVD firmware [ 1.309341] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_vce.bin [ 1.309343] [drm] Found VCE firmware Version: 55.3 Binary ID: 4 [ 1.309348] [drm] PSP loading VCE firmware [ 1.392680] nvme nvme0: Shutdown timeout set to 8 seconds [ 1.429039] nvme0n1: p1 p2 p3 p4 [ 1.534730] ata9: SATA link down (SStatus 0 SControl 300) [ 1.584043] usb 1-5: new high-speed USB device number 2 using xhci_hcd [ 1.588562] usb 3-2: new high-speed USB device number 2 using xhci_hcd [ 1.641533] amdgpu: [powerplay] GPU over temperature range detected on PCIe 0:0.0! [ 1.664075] [drm] Display Core initialized with v3.1.59! [ 1.689629] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.689630] [drm] Driver supports precise vblank timestamp query. [ 1.696041] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.697401] ata1.00: ATA-8: ST1000DM010-2EP102, CC43, max UDMA/133 [ 1.697403] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.698113] ata1.00: configured for UDMA/133 [ 1.698278] scsi 0:0:0:0: Direct-Access ATA ST1000DM010-2EP1 CC43 PQ: 0 ANSI: 5 [ 1.712684] [drm] UVD and UVD ENC initialized successfully. [ 1.752656] tsc: Refined TSC clocksource calibration: 3693.060 MHz [ 1.752671] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a77744cfd5, max_idle_ns: 881590969987 ns [ 1.752721] clocksource: Switched to clocksource tsc [ 1.775315] usb 1-5: New USB device found, idVendor=08ec, idProduct=0008, bcdDevice= 1.00 [ 1.775318] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.775319] usb 1-5: Product: DataTraveler 2.0 [ 1.775320] usb 1-5: Manufacturer: Kingston [ 1.775321] usb 1-5: SerialNumber: 0BF1735141E268C7 [ 1.793132] usb-storage 1-5:1.0: USB Mass Storage device detected [ 1.793218] scsi host9: usb-storage 1-5:1.0 [ 1.793274] usbcore: registered new interface driver usb-storage [ 1.794339] usbcore: registered new interface driver uas [ 1.812515] [drm] VCE initialized successfully. [ 1.813872] kfd kfd: Allocated 3969056 bytes on gart [ 1.813883] Virtual CRAT table created for GPU [ 1.813884] Parsing CRAT table with 1 nodes [ 1.813891] Creating topology SYSFS entries [ 1.813975] Topology: Add dGPU node [0x687f:0x1002] [ 1.814016] kfd kfd: added device 1002:687f [ 1.815022] [drm] fb mappable at 0xE1000000 [ 1.815022] [drm] vram apper at 0xE0000000 [ 1.815023] [drm] size 8294400 [ 1.815024] [drm] fb depth is 24 [ 1.815024] [drm] pitch is 7680 [ 1.815062] fbcon: amdgpudrmfb (fb0) is primary device [ 1.843440] Console: switching to colour frame buffer device 240x67 [ 1.863130] amdgpu 0000:0b:00.0: fb0: amdgpudrmfb frame buffer device [ 1.878599] usb 3-2: New USB device found, idVendor=14b2, idProduct=3c22, bcdDevice= 0.01 [ 1.878601] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.878603] usb 3-2: Product: 802.11 bg WLAN [ 1.878604] usb 3-2: Manufacturer: Ralink [ 1.884088] amdgpu 0000:0b:00.0: ring 0(gfx) uses VM inv eng 4 on hub 0 [ 1.884089] amdgpu 0000:0b:00.0: ring 1(comp_1.0.0) uses VM inv eng 5 on hub 0 [ 1.884090] amdgpu 0000:0b:00.0: ring 2(comp_1.1.0) uses VM inv eng 6 on hub 0 [ 1.884091] amdgpu 0000:0b:00.0: ring 3(comp_1.2.0) uses VM inv eng 7 on hub 0 [ 1.884091] amdgpu 0000:0b:00.0: ring 4(comp_1.3.0) uses VM inv eng 8 on hub 0 [ 1.884092] amdgpu 0000:0b:00.0: ring 5(comp_1.0.1) uses VM inv eng 9 on hub 0 [ 1.884093] amdgpu 0000:0b:00.0: ring 6(comp_1.1.1) uses VM inv eng 10 on hub 0 [ 1.884093] amdgpu 0000:0b:00.0: ring 7(comp_1.2.1) uses VM inv eng 11 on hub 0 [ 1.884094] amdgpu 0000:0b:00.0: ring 8(comp_1.3.1) uses VM inv eng 12 on hub 0 [ 1.884094] amdgpu 0000:0b:00.0: ring 9(kiq_2.1.0) uses VM inv eng 13 on hub 0 [ 1.884095] amdgpu 0000:0b:00.0: ring 10(sdma0) uses VM inv eng 4 on hub 1 [ 1.884096] amdgpu 0000:0b:00.0: ring 11(sdma1) uses VM inv eng 5 on hub 1 [ 1.884097] amdgpu 0000:0b:00.0: ring 12(uvd<0>) uses VM inv eng 6 on hub 1 [ 1.884097] amdgpu 0000:0b:00.0: ring 13(uvd_enc0<0>) uses VM inv eng 7 on hub 1 [ 1.884098] amdgpu 0000:0b:00.0: ring 14(uvd_enc1<0>) uses VM inv eng 8 on hub 1 [ 1.884099] amdgpu 0000:0b:00.0: ring 15(vce0) uses VM inv eng 9 on hub 1 [ 1.884099] amdgpu 0000:0b:00.0: ring 16(vce1) uses VM inv eng 10 on hub 1 [ 1.884100] amdgpu 0000:0b:00.0: ring 17(vce2) uses VM inv eng 11 on hub 1 [ 1.884142] [drm] ECC is not present. [ 1.884764] [drm] Initialized amdgpu 3.27.0 20150101 for 0000:0b:00.0 on minor 0 [ 1.916056] usb 1-6: new low-speed USB device number 3 using xhci_hcd [ 2.004316] usb 3-4: new full-speed USB device number 3 using xhci_hcd [ 2.009409] ata2: SATA link down (SStatus 0 SControl 300) [ 2.172698] usb 1-6: New USB device found, idVendor=1241, idProduct=1111, bcdDevice= 1.00 [ 2.172701] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.182788] hidraw: raw HID events driver (C) Jiri Kosina [ 2.186978] usb 3-4: New USB device found, idVendor=046d, idProduct=c52e, bcdDevice=15.00 [ 2.186980] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.186981] usb 3-4: Product: USB Receiver [ 2.186982] usb 3-4: Manufacturer: Logitech [ 2.200512] usbcore: registered new interface driver usbhid [ 2.200513] usbhid: USB HID core driver [ 2.201706] input: HID 1241:1111 as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-6/1-6:1.0/0003:1241:1111.0001/input/input2 [ 2.201781] hid-generic 0003:1241:1111.0001: input,hidraw0: USB HID v1.00 Mouse [HID 1241:1111] on usb-0000:02:00.0-6/input0 [ 2.226250] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:07.1/0000:0c:00.3/usb3/3-4/3-4:1.0/0003:046D:C52E.0002/input/input3 [ 2.284672] hid-generic 0003:046D:C52E.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:0c:00.3-4/input0 [ 2.304057] usb 1-8: new full-speed USB device number 4 using xhci_hcd [ 2.309506] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:07.1/0000:0c:00.3/usb3/3-4/3-4:1.1/0003:046D:C52E.0003/input/input4 [ 2.309980] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:07.1/0000:0c:00.3/usb3/3-4/3-4:1.1/0003:046D:C52E.0003/input/input5 [ 2.328661] ata5: SATA link down (SStatus 0 SControl 330) [ 2.368476] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:07.1/0000:0c:00.3/usb3/3-4/3-4:1.1/0003:046D:C52E.0003/input/input6 [ 2.368599] hid-generic 0003:046D:C52E.0003: input,hiddev0,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:0c:00.3-4/input1 [ 2.630702] usb 1-8: New USB device found, idVendor=2516, idProduct=0051, bcdDevice=11.01 [ 2.630704] usb 1-8: New USB device strings: Mfr=3, Product=1, SerialNumber=0 [ 2.630705] usb 1-8: Product: AMD SR4 lamplight Control [ 2.630706] usb 1-8: Manufacturer: Cooler Master Technology Inc. [ 2.653635] input: Cooler Master Technology Inc. AMD SR4 lamplight Control as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-8/1-8:1.0/0003:2516:0051.0004/input/input9 [ 2.712599] hid-generic 0003:2516:0051.0004: input,hidraw3: USB HID v1.11 Keyboard [Cooler Master Technology Inc. AMD SR4 lamplight Control] on usb-0000:02:00.0-8/input0 [ 2.720542] hid-generic 0003:2516:0051.0005: hiddev1,hidraw4: USB HID v1.11 Device [Cooler Master Technology Inc. AMD SR4 lamplight Control] on usb-0000:02:00.0-8/input1 [ 2.726631] input: Cooler Master Technology Inc. AMD SR4 lamplight Control System Control as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-8/1-8:1.2/0003:2516:0051.0006/input/input10 [ 2.784470] input: Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-8/1-8:1.2/0003:2516:0051.0006/input/input11 [ 2.784549] hid-generic 0003:2516:0051.0006: input,hidraw5: USB HID v1.11 Device [Cooler Master Technology Inc. AMD SR4 lamplight Control] on usb-0000:02:00.0-8/input2 [ 2.804423] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.805137] ata6.00: ATAPI: TSSTcorpDVD-ROM SH-D163B, SB01, max UDMA/33 [ 2.807265] ata6.00: configured for UDMA/33 [ 2.811281] scsi 5:0:0:0: CD-ROM TSSTcorp DVD-ROM SH-D163B SB01 PQ: 0 ANSI: 5 [ 2.812932] scsi 9:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.04 PQ: 0 ANSI: 0 CCS [ 2.815702] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.815703] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 2.815706] sd 0:0:0:0: [sda] Write Protect is off [ 2.815707] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.815712] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.816121] sd 9:0:0:0: [sdb] 2007040 512-byte logical blocks: (1.03 GB/980 MiB) [ 2.816276] sd 9:0:0:0: [sdb] Write Protect is off [ 2.816278] sd 9:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 2.816430] sd 9:0:0:0: [sdb] No Caching mode page found [ 2.816450] sd 9:0:0:0: [sdb] Assuming drive cache: write through [ 2.819649] sdb: sdb1 [ 2.821322] sd 9:0:0:0: [sdb] Attached SCSI removable disk [ 2.862560] sda: sda1 sda2 sda3 [ 2.862894] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.925628] sr 5:0:0:0: [sr0] scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray [ 2.925630] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.925955] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 3.337185] PM: Image not found (code -22) [ 3.567487] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 4.542164] systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time. [ 4.742507] systemd[1]: Inserted module 'autofs4' [ 4.936411] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 4.956213] systemd[1]: Detected architecture x86-64. [ 4.973437] systemd[1]: Set hostname to . [ 5.952563] systemd[1]: Listening on fsck to fsckd communication Socket. [ 5.956063] systemd[1]: Created slice User and Session Slice. [ 5.956121] systemd[1]: Listening on Syslog Socket. [ 5.956163] systemd[1]: Listening on udev Kernel Socket. [ 5.956424] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 5.956502] systemd[1]: Listening on Journal Audit Socket. [ 5.956552] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.234322] lp: driver loaded but no devices found [ 6.264275] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 6.301013] ppdev: user-space parallel port driver [ 6.366095] systemd-journald[523]: Received request to flush runtime journal from PID 1 [ 6.654987] ec_master: loading out-of-tree module taints kernel. [ 6.655136] ec_master: module verification failed: signature and/or required key missing - tainting kernel [ 6.658708] EtherCAT: Master driver 1.5.2 334c34cfd2e5+ [ 6.658780] EtherCAT: 1 master waiting for devices. [ 6.679500] ec_generic: EtherCAT master generic Ethernet device module 1.5.2 334c34cfd2e5+ [ 6.679507] EtherCAT: Accepting 04:D9:F5:CD:BC:0F as main device for master 0. [ 6.679514] ec_generic: Binding socket to interface 2 (enp8s0). [ 6.708033] EtherCAT 0: Starting EtherCAT-IDLE thread. [ 6.708090] EtherCAT 0: Link state of ecm0 changed to UP. [ 6.716044] EtherCAT WARNING 0: 1 datagram TIMED OUT! [ 7.276171] acpi_cpufreq: overriding BIOS provided _PSD data [ 7.317914] input: PC Speaker as /devices/platform/pcspkr/input/input12 [ 7.703020] ccp 0000:0c:00.2: enabling device (0000 -> 0002) [ 7.723831] EtherCAT WARNING 0: 113 datagrams TIMED OUT! [ 7.863793] ccp 0000:0c:00.2: ccp enabled [ 7.863954] ccp 0000:0c:00.2: psp initialization failed [ 7.863957] ccp 0000:0c:00.2: enabled [ 8.161687] asus_wmi: ASUS WMI generic driver loaded [ 8.202884] kvm: Nested Virtualization enabled [ 8.202902] kvm: Nested Paging enabled [ 8.202904] SVM: Virtual VMLOAD VMSAVE supported [ 8.202905] SVM: Virtual GIF supported [ 8.315385] asus_wmi: Initialization: 0x0 [ 8.315415] asus_wmi: BIOS WMI version: 0.9 [ 8.315528] asus_wmi: SFUN value: 0x0 [ 8.388971] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input13 [ 8.425569] asus_wmi: Number of fans: 1 [ 8.472486] MCE: In-kernel MCE decoding enabled. [ 8.515538] snd_hda_intel 0000:0b:00.1: Handle vga_switcheroo audio client [ 8.516794] snd_hda_intel 0000:0d:00.3: enabling device (0000 -> 0002) [ 8.517350] EDAC amd64: Node 0: DRAM ECC disabled. [ 8.517353] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 8.552243] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 8.562147] sd 9:0:0:0: Attached scsi generic sg1 type 0 [ 8.569508] sr 5:0:0:0: Attached scsi generic sg2 type 5 [ 8.642529] EDAC amd64: Node 0: DRAM ECC disabled. [ 8.642531] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 8.720036] EtherCAT WARNING 0: 111 datagrams TIMED OUT! [ 8.726323] EDAC amd64: Node 0: DRAM ECC disabled. [ 8.726326] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 8.824363] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input14 [ 8.830183] EDAC amd64: Node 0: DRAM ECC disabled. [ 8.830186] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 8.848252] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input15 [ 8.875597] input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input16 [ 8.880441] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 8.880444] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 8.880446] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 8.880447] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 8.880448] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x0 [ 8.880449] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 8.880451] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 8.880452] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 8.880453] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ 8.901100] input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input17 [ 8.928749] input: HD-Audio Generic HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input18 [ 8.943398] EDAC amd64: Node 0: DRAM ECC disabled. [ 8.943400] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 8.957910] input: HD-Audio Generic HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input19 [ 8.993644] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input20 [ 9.018892] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input21 [ 9.046080] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input22 [ 9.048057] EDAC amd64: Node 0: DRAM ECC disabled. [ 9.048060] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 9.074790] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input23 [ 9.105210] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input24 [ 9.171107] EDAC amd64: Node 0: DRAM ECC disabled. [ 9.171111] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 9.288120] EDAC amd64: Node 0: DRAM ECC disabled. [ 9.288123] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 9.412668] EDAC amd64: Node 0: DRAM ECC disabled. [ 9.412670] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 9.518086] EDAC amd64: Node 0: DRAM ECC disabled. [ 9.518088] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 9.573820] EDAC amd64: Node 0: DRAM ECC disabled. [ 9.573822] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 9.629221] EDAC amd64: Node 0: DRAM ECC disabled. [ 9.629223] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 9.664101] usb 3-2: reset high-speed USB device number 2 using xhci_hcd [ 9.681273] EDAC amd64: Node 0: DRAM ECC disabled. [ 9.681275] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 9.720048] EtherCAT WARNING 0: 105 datagrams TIMED OUT! [ 9.745180] EDAC amd64: Node 0: DRAM ECC disabled. [ 9.745183] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 9.820920] EDAC amd64: Node 0: DRAM ECC disabled. [ 9.820922] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 9.884752] EDAC amd64: Node 0: DRAM ECC disabled. [ 9.884754] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 10.146033] ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2573, rf: 0002, rev: 000a [ 10.174643] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 10.175281] usbcore: registered new interface driver rt73usb [ 10.223084] rt73usb 3-2:1.0 wlx00805a38596a: renamed from wlan0 [ 10.724031] EtherCAT WARNING 0: 111 datagrams TIMED OUT! [ 11.107299] Adding 1000444k swap on /dev/sda3. Priority:-2 extents:1 across:1000444k FS [ 11.202641] audit: type=1400 audit(1616325871.810:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=855 comm="apparmor_parser" [ 11.202748] audit: type=1400 audit(1616325871.810:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=850 comm="apparmor_parser" [ 11.204042] audit: type=1400 audit(1616325871.810:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=849 comm="apparmor_parser" [ 11.224065] audit: type=1400 audit(1616325871.834:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=857 comm="apparmor_parser" [ 11.224070] audit: type=1400 audit(1616325871.834:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=857 comm="apparmor_parser" [ 11.231590] audit: type=1400 audit(1616325871.838:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=854 comm="apparmor_parser" [ 11.231595] audit: type=1400 audit(1616325871.838:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=854 comm="apparmor_parser" [ 11.231597] audit: type=1400 audit(1616325871.838:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=854 comm="apparmor_parser" [ 11.301002] audit: type=1400 audit(1616325871.910:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=856 comm="apparmor_parser" [ 11.303509] audit: type=1400 audit(1616325871.910:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=853 comm="apparmor_parser" [ 11.728032] EtherCAT WARNING 0: 114 datagrams TIMED OUT! [ 12.691104] r8169 0000:08:00.0: firmware: direct-loading firmware rtl_nic/rtl8168h-2.fw [ 12.691398] Generic PHY r8169-800:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-800:00, irq=IGNORE) [ 12.692053] EtherCAT 0: Link state of ecm0 changed to DOWN. [ 12.799065] r8169 0000:08:00.0 enp8s0: Link is Down [ 14.410408] r8169 0000:08:00.0 enp8s0: Link is Up - 100Mbps/Full - flow control off [ 14.416035] EtherCAT 0: Link state of ecm0 changed to UP. [ 14.424047] EtherCAT 0: 1 slave(s) responding on main device. [ 14.424049] EtherCAT 0: Slave states on main device: INIT. [ 14.424115] EtherCAT 0: Scanning bus. [ 14.496846] EtherCAT 0: Bus scanning completed in 72 ms. [ 14.496847] EtherCAT 0: Using slave 0 as DC reference clock. [ 14.524047] EtherCAT 0: Slave states on main device: PREOP. [ 15.207576] IPv6: ADDRCONF(NETDEV_UP): wlx00805a38596a: link is not ready [ 15.207663] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin' [ 15.227149] rt73usb 3-2:1.0: firmware: direct-loading firmware rt73.bin [ 15.227153] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 1.7 [ 15.279340] IPv6: ADDRCONF(NETDEV_UP): wlx00805a38596a: link is not ready [ 15.403543] IPv6: ADDRCONF(NETDEV_UP): wlx00805a38596a: link is not ready [ 15.725655] IPv6: ADDRCONF(NETDEV_UP): wlx00805a38596a: link is not ready [ 17.030793] IPv6: ADDRCONF(NETDEV_UP): wlx00805a38596a: link is not ready [ 18.281202] wlx00805a38596a: authenticate with e0:41:36:b8:1a:30 [ 18.315742] wlx00805a38596a: send auth to e0:41:36:b8:1a:30 (try 1/3) [ 18.317295] wlx00805a38596a: authenticated [ 18.320049] wlx00805a38596a: associate with e0:41:36:b8:1a:30 (try 1/3) [ 18.323736] wlx00805a38596a: RX AssocResp from e0:41:36:b8:1a:30 (capab=0x1411 status=0 aid=6) [ 18.329552] wlx00805a38596a: associated [ 18.445249] IPv6: ADDRCONF(NETDEV_CHANGE): wlx00805a38596a: link becomes ready [ 147.010198] EtherCAT: Requesting master 0... [ 147.010202] EtherCAT: Successfully requested master 0. [ 147.200328] EtherCAT 0: Domain0: Logical address 0x00000000, 28 byte, expected working counter 3. [ 147.200330] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 28 byte, type LRW. [ 147.200344] EtherCAT 0: Master thread exited. [ 147.200347] EtherCAT 0: Starting EtherCAT-OP thread. [ 147.200419] EtherCAT WARNING 0: 107 datagrams TIMED OUT! [ 147.529492] EtherCAT WARNING 0-0: Slave does not support changing the PDO mapping! [ 147.529494] EtherCAT WARNING 0-0: [ 147.529494] Currently mapped PDO entries: [ 147.529496] 0x0086:00/16 [ 147.529496] [ 147.529496] 0x0024:00/32 [ 147.529497] . Entries to map: [ 147.529497] 0x0086:01/16 [ 147.529498] [ 147.529498] 0x0018:01/32 [ 147.529500] EtherCAT WARNING 0-0: Slave does not support changing the PDO mapping! [ 147.529501] EtherCAT WARNING 0-0: [ 147.529501] Currently mapped PDO entries: [ 147.529501] 0x0086:00/16 [ 147.529501] [ 147.529502] 0x0024:00/32 [ 147.529502] . Entries to map: [ 147.529502] 0x0086:02/16 [ 147.529502] [ 147.529503] 0x0018:02/32 [ 147.529506] EtherCAT WARNING 0-0: Slave does not support changing the PDO mapping! [ 147.529506] EtherCAT WARNING 0-0: [ 147.529506] Currently mapped PDO entries: [ 147.529506] 0x0087:00/16 [ 147.529507] [ 147.529507] 0x0033:00/32 [ 147.529507] . Entries to map: [ 147.529507] 0x0087:01/16 [ 147.529508] [ 147.529508] 0x0033:01/32 [ 147.529508] [ 147.529509] 0x0054:01/16 [ 147.529510] EtherCAT WARNING 0-0: Slave does not support changing the PDO mapping! [ 147.529510] EtherCAT WARNING 0-0: [ 147.529510] Currently mapped PDO entries: [ 147.529510] 0x0087:00/16 [ 147.529511] [ 147.529511] 0x0033:00/32 [ 147.529511] . Entries to map: [ 147.529511] 0x0087:02/16 [ 147.529512] [ 147.529512] 0x0033:02/32 [ 147.529512] [ 147.529512] 0x0054:02/16 [ 147.647494] EtherCAT 0: Domain 0: Working counter changed to 3/3 [ 147.647495] . [ 147.900052] EtherCAT 0: Slave states on main device: OP. [ 148.648518] EtherCAT 0: Domain 0: 3 working counter changes - now 3/3 [ 148.648519] . [ 149.204201] EtherCAT WARNING 0: 2 datagrams UNMATCHED! [ 149.244533] EtherCAT WARNING: Datagram 00000000e38afa9b (domain0-0-main) was SKIPPED 1 time. [ 213.095041] EtherCAT 0: Domain 0: Working counter changed to 2/3 [ 213.095042] . [ 214.096065] EtherCAT 0: Domain 0: Working counter changed to 3/3 [ 214.096066] . [ 218.216730] EtherCAT 0: Domain 0: Working counter changed to 0/3 [ 218.216731] . [ 218.253171] EtherCAT ERROR 0-0: AL status message 0x001A: "Synchronization error". [ 218.255161] EtherCAT 0-0: Acknowledged state SAFEOP. [ 218.363642] EtherCAT WARNING 0: 6 datagrams UNMATCHED! [ 218.513172] EtherCAT WARNING 0-0: Slave does not support changing the PDO mapping! [ 218.513173] EtherCAT WARNING 0-0: [ 218.513173] Currently mapped PDO entries: [ 218.513174] 0x0086:00/16 [ 218.513174] [ 218.513175] 0x0024:00/32 [ 218.513176] . Entries to map: [ 218.513176] 0x0086:01/16 [ 218.513176] [ 218.513177] 0x0018:01/32 [ 218.513178] EtherCAT WARNING 0-0: Slave does not support changing the PDO mapping! [ 218.513179] EtherCAT WARNING 0-0: [ 218.513179] Currently mapped PDO entries: [ 218.513179] 0x0086:00/16 [ 218.513180] [ 218.513180] 0x0024:00/32 [ 218.513180] . Entries to map: [ 218.513180] 0x0086:02/16 [ 218.513181] [ 218.513181] 0x0018:02/32 [ 218.513184] EtherCAT WARNING 0-0: Slave does not support changing the PDO mapping! [ 218.513184] EtherCAT WARNING 0-0: [ 218.513184] Currently mapped PDO entries: [ 218.513185] 0x0087:00/16 [ 218.513185] [ 218.513185] 0x0033:00/32 [ 218.513185] . Entries to map: [ 218.513186] 0x0087:01/16 [ 218.513186] [ 218.513186] 0x0033:01/32 [ 218.513186] [ 218.513187] 0x0054:01/16 [ 218.513188] EtherCAT WARNING 0-0: Slave does not support changing the PDO mapping! [ 218.513188] EtherCAT WARNING 0-0: [ 218.513188] Currently mapped PDO entries: [ 218.513189] 0x0087:00/16 [ 218.513189] [ 218.513189] 0x0033:00/32 [ 218.513189] . Entries to map: [ 218.513190] 0x0087:02/16 [ 218.513190] [ 218.513190] 0x0033:02/32 [ 218.513190] [ 218.513191] 0x0054:02/16 [ 218.524169] EtherCAT WARNING: Datagram 00000000e38afa9b (domain0-0-main) was SKIPPED 3 times. [ 218.746139] EtherCAT 0: Master thread exited. [ 218.746160] EtherCAT 0: Starting EtherCAT-IDLE thread. [ 218.746203] EtherCAT 0: Releasing master... [ 218.746204] EtherCAT 0: Released. [ 218.913120] EtherCAT ERROR 0-0: Failed to set OP state, slave refused state change (SAFEOP + ERROR). [ 218.913147] EtherCAT ERROR 0-0: AL status message 0x001A: "Synchronization error". [ 218.913245] EtherCAT 0-0: Acknowledged state SAFEOP. [ 218.919668] EtherCAT 0: Slave states on main device: SAFEOP. [ 297.139692] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. avc@avc:~/LinuxCncRip/scripts$