Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) vfdmod: reading 'spindle.rpm-out' from address 8203 (0x200B)... [01][03][20][0B][00][01][FE][08] Waiting for a confirmation... <01><03><02><00><00><44> vfdmod: returned value is 0 (0x0000) vfdmod: reading 'parameters.user-s32-parameter' from address 8192 (0x2000)... [01][03][20][00][00][01][8F][CA] Waiting for a confirmation... <01><03><02><00><00><44> vfdmod: returned value is 0 (0x0000) vfdmod: reading 'parameters.user-float-parameter' from address 8203 (0x200B)... [01][03][20][0B][00][01][FE][08] Waiting for a confirmation... <01><03><02><00><00><44> vfdmod: returned value is 0 (0x0000) vfdmod: reading 'parameters.user-u32-parameter' from address 0 (0x0000)... [01][03][00][00][00][01][84][0A] Waiting for a confirmation... <01><03><02><00><0A><38><43> vfdmod: returned value is 10 (0x000A) vfdmod: reading 'parameters.user-bit-parameter' from address 8192 (0x2000)... [01][03][20][00][00][01][8F][CA] Waiting for a confirmation... <01><03><02><00><00><44> vfdmod: returned value is 0 (0x0000) vfdmod: reading 'parameters.user-coil-parameter' from address 8193 (0x2001)... [01][01][20][01][00][01][A7][CA] Waiting for a confirmation... <01><81><01><81><90> vfdmod: setting command speed value to 4 (0x0004)... [01][06][20][01][00][04][D2][09] Waiting for a confirmation... <01><06><20><01><00><04><09> vfdmod: setting control word value to 1 (0x0001)... [01][06][20][00][00][01][43][CA] Waiting for a confirmation... <01><06><20><00><00><01><43> vfdmod: reading 'spindle.rpm-out' from address 8203 (0x200B)... [01][03][20][0B][00][01][FE][08] Waiting for a confirmation... <01><03><02><00><00><44> vfdmod: returned value is 0 (0x0000) vfdmod: reading 'parameters.user-s32-parameter' from address 8192 (0x2000)... [01][03][20][00][00][01][8F][CA] Waiting for a confirmation... <01><03><02><00><00><44> vfdmod: returned value is 0 (0x0000) vfdmod: reading 'parameters.user-float-parameter' from address 8203 (0x200B)... [01][03][20][0B][00][01][FE][08] Waiting for a confirmation... <01><03><02><00><00><44> vfdmod: returned value is 0 (0x0000) vfdmod: reading 'parameters.user-u32-parameter' from address 0 (0x0000)... [01][03][00][00][00][01][84][0A] Waiting for a confirmation... <01><03><02><00><0A><38><43> vfdmod: returned value is 10 (0x000A) vfdmod: reading 'parameters.user-bit-parameter' from address 8192 (0x2000)... [01][03][20][00][00][01][8F][CA] Waiting for a confirmation... <01><03><02><00><00><44> vfdmod: returned value is 0 (0x0000) vfdmod: reading 'parameters.user-coil-parameter' from address 8193 (0x2001)... [01][01][20][01][00][01][A7][CA] Waiting for a confirmation... <01><81><01><81><90> vfdmod: setting command speed value to 4 (0x0004)... [01][06][20][01][00][04][D2][09] Waiting for a confirmation... <01><06><20><01><00><04><09> vfdmod: setting control word value to 1 (0x0001)... [01][06][20][00][00][01][43][CA] Waiting for a confirmation... <01><06><20><00><00><01><43> vfdmod: reading 'spindle.rpm-out' from address 8203 (0x200B)... [01][03][20][0B][00][01][FE][08] Waiting for a confirmation... <01><03><02><00><00><44> vfdmod: returned value is 0 (0x0000) vfdmod: reading 'parameters.user-s32-parameter' from address 8192 (0x2000)... [01][03][20][00][00][01][8F][CA] Waiting for a confirmation... <01><03><02><00><00><44> vfdmod: returned value is 0 (0x0000) vfdmod: reading 'parameters.user-float-parameter' from address 8203 (0x200B)... [01][03][20][0B][00][01][FE][08] Waiting for a confirmation... <01><03><02><00><00><44> vfdmod: returned value is 0 (0x0000) vfdmod: reading 'parameters.user-u32-parameter' from address 0 (0x0000)... [01][03][00][00][00][01][84][0A] Waiting for a confirmation... <01><03><02><00><0A><38><43> vfdmod: returned value is 10 (0x000A) vfdmod: reading 'parameters.user-bit-parameter' from address 8192 (0x2000)... [01][03][20][00][00][01][8F][CA] Waiting for a confirmation... <01><03><02><00><00><44> vfdmod: returned value is 0 (0x0000) vfdmod: reading 'parameters.user-coil-parameter' from address 8193 (0x2001)... [01][01][20][01][00][01][A7][CA] Waiting for a confirmation... <01><81><01><81><90> vfdmod: setting command speed value to 4 (0x0004)... [01][06][20][01][00][04][D2][09] Waiting for a confirmation... <01><06><20><01><00><04><09> vfdmod: setting control word value to 1 (0x0001)... [01][06][20][00][00][01][43][CA] Waiting for a confirmation... <01><06><20><00><00><01><43> vfdmod: reading 'spindle.rpm-out' from address 8203 (0x200B)... [01][03][20][0B][00][01][FE][08] Waiting for a confirmation... <01><03><02><00><00><44> vfdmod: returned value is 0 (0x0000) vfdmod: reading 'parameters.user-s32-parameter' from address 8192 (0x2000)... [01][03][20][00][00][01][8F][CA] Waiting for a confirmation... <01><03><02><00><00><44> vfdmod: returned value is 0 (0x0000) vfdmod: reading 'parameters.user-float-parameter' from address 8203 (0x200B)... [01][03][20][0B][00][01][FE][08] Waiting for a confirmation... <01><03><02><00><00><44> vfdmod: returned value is 0 (0x0000) vfdmod: reading 'parameters.user-u32-parameter' from address 0 (0x0000)... [01][03][00][00][00][01][84][0A] Waiting for a confirmation... <01><03><02><00><0A><38><43> vfdmod: returned value is 10 (0x000A) vfdmod: reading 'parameters.user-bit-parameter' from address 8192 (0x2000)... [01][03][20][00][00][01][8F][CA] Waiting for a confirmation... <01><03><02><00><00><44> vfdmod: returned value is 0 (0x0000) vfdmod: reading 'parameters.user-coil-parameter' from address 8193 (0x2001)... [01][01][20][01][00][01][A7][CA] Waiting for a confirmation... <01><81><01><81><90> vfdmod: setting command speed value to 4 (0x0004)... [01][06][20][01][00][04][D2][09] Waiting for a confirmation... <01><06><20><01><00><04><09> vfdmod: setting control word value to 1 (0x0001)... [01][06][20][00][00][01][43][CA] Waiting for a confirmation... <01><06><20><00><00><01><43> vfdmod: reading 'spindle.rpm-out' from address 8203 (0x200B)... [01][03][20][0B][00][01][FE][08] Waiting for a confirmation... <01><03><02><00><00><44> vfdmod: returned value is 0 (0x0000) vfdmod: reading 'parameters.user-s32-parameter' from address 8192 (0x2000)... [01][03][20][00][00][01][8F][CA] Waiting for a confirmation... <01><03><02><00><00><44> vfdmod: returned value is 0 (0x0000) vfdmod: reading 'parameters.user-float-parameter' from address 8203 (0x200B)... [01][03][20][0B][00][01][FE][08] Waiting for a confirmation... <01><03><02><00><00><44> vfdmod: returned value is 0 (0x0000) vfdmod: reading 'parameters.user-u32-parameter' from address 0 (0x0000)... [01][03][00][00][00][01][84][0A] Waiting for a confirmation... <01><03><02><00><0A><38><43> vfdmod: returned value is 10 (0x000A) vfdmod: reading 'parameters.user-bit-parameter' from address 8192 (0x2000)... [01][03][20][00][00][01][8F][CA] Waiting for a confirmation... <01><03><02><00><00><44> vfdmod: returned value is 0 (0x0000) vfdmod: reading 'parameters.user-coil-parameter' from address 8193 (0x2001)... [01][01][20][01][00][01][A7][CA] Waiting for a confirmation... <01><81><01><81><90> vfdmod: setting command speed value to 4 (0x0004)... [01][06][20][01][00][04][D2][09] Waiting for a confirmation... <01><06><20><01><00><04><09> vfdmod: setting control word value to 1 (0x0001)... [01][06][20][00][00][01][43][CA] Waiting for a confirmation... <01><06><20><00><00><01><43> vfdmod: reading 'spindle.rpm-out' from address 8203 (0x200B)... [01][03][20][0B][00][01][FE][08] Waiting for a confirmation... <01><03><02><00><00><44> vfdmod: returned value is 0 (0x0000) vfdmod: reading 'parameters.user-s32-parameter' from address 8192 (0x2000)... [01][03][20][00][00][01][8F][CA] Waiting for a confirmation... <01><03><02><00><00><44> vfdmod: returned value is 0 (0x0000) vfdmod: reading 'parameters.user-float-parameter' from address 8203 (0x200B)... [01][03][20][0B][00][01][FE][08] Waiting for a confirmation... <01><03><02><00><00><44> vfdmod: returned value is 0 (0x0000) vfdmod: reading 'parameters.user-u32-parameter' from address 0 (0x0000)... [01][03][00][00][00][01][84][0A] Waiting for a confirmation... <01><03><02><00><0A><38><43> vfdmod: returned value is 10 (0x000A) vfdmod: reading 'parameters.user-bit-parameter' from address 8192 (0x2000)... [01][03][20][00][00][01][8F][CA] Waiting for a confirmation... <01><03><02><00><00><44> vfdmod: returned value is 0 (0x0000) vfdmod: reading 'parameters.user-coil-parameter' from address 8193 (0x2001)... [01][01][20][01][00][01][A7][CA] Waiting for a confirmation... <01><81><01><81><90> vfdmod: setting command speed value to 4 (0x0004)... [01][06][20][01][00][04][D2][09] Waiting for a confirmation... <01><06><20><01><00><04><09> vfdmod: setting control word value to 1 (0x0001)... [01][06][20][00][00][01][43][CA] Waiting for a confirmation... <01><06><20><00><00><01><43> vfdmod: reading 'spindle.rpm-out' from address 8203 (0x200B)... [01][03][20][0B][00][01][FE][08] Waiting for a confirmation... <01><03><02><00><00><44> vfdmod: returned value is 0 (0x0000) vfdmod: reading 'parameters.user-s32-parameter' from address 8192 (0x2000)... [01][03][20][00][00][01][8F][CA] Waiting for a confirmation... <01><03><02><00><00><44> vfdmod: returned value is 0 (0x0000) vfdmod: reading 'parameters.user-float-parameter' from address 8203 (0x200B)... [01][03][20][0B][00][01][FE][08] Waiting for a confirmation... <01><03><02><00><00><44> vfdmod: returned value is 0 (0x0000) vfdmod: reading 'parameters.user-u32-parameter' from address 0 (0x0000)... [01][03][00][00][00][01][84][0A] Waiting for a confirmation... <01><03><02><00><0A><38><43> vfdmod: returned value is 10 (0x000A) vfdmod: reading 'parameters.user-bit-parameter' from address 8192 (0x2000)... [01][03][20][00][00][01][8F][CA] Waiting for a confirmation... <01><03><02><00><00><44> vfdmod: returned value is 0 (0x0000) vfdmod: reading 'parameters.user-coil-parameter' from address 8193 (0x2001)... [01][01][20][01][00][01][A7][CA] Waiting for a confirmation... <01><81><01><81><90> vfdmod: setting command speed value to 4 (0x0004)... [01][06][20][01][00][04][D2][09] Waiting for a confirmation... <01><06><20><01><00><04><09> vfdmod: setting control word value to 1 (0x0001)... [01][06][20][00][00][01][43][CA] Waiting for a confirmation... <01><06><20><00><00><01><43> vfdmod: reading 'spindle.rpm-out' from address 8203 (0x200B)... [01][03][20][0B][00][01][FE][08] Waiting for a confirmation... <01><03><02><00><00><44> vfdmod: returned value is 0 (0x0000) vfdmod: reading 'parameters.user-s32-parameter' from address 8192 (0x2000)... [01][03][20][00][00][01][8F][CA] Waiting for a confirmation... <01><03><02><00><00><44> vfdmod: returned value is 0 (0x0000) vfdmod: reading 'parameters.user-float-parameter' from address 8203 (0x200B)... [01][03][20][0B][00][01][FE][08] Waiting for a confirmation... <01><03><02><00><00><44> vfdmod: returned value is 0 (0x0000) vfdmod: reading 'parameters.user-u32-parameter' from address 0 (0x0000)... [01][03][00][00][00][01][84][0A] Waiting for a confirmation... vfdmod: close request received. <01><03><02><00><0A><38><43> vfdmod: returned value is 10 (0x000A) vfdmod: reading 'parameters.user-bit-parameter' from address 8192 (0x2000)... [01][03][20][00][00][01][8F][CA] Waiting for a confirmation... <01><03><02><00><00><44> vfdmod: returned value is 0 (0x0000) vfdmod: reading 'parameters.user-coil-parameter' from address 8193 (0x2001)... [01][01][20][01][00][01][A7][CA] Waiting for a confirmation... <01><81><01><81><90> vfdmod: setting command speed value to 4 (0x0004)... [01][06][20][01][00][04][D2][09] Waiting for a confirmation... <01><06><20><01><00><04><09> vfdmod: setting control word value to 1 (0x0001)... [01][06][20][00][00][01][43][CA] Waiting for a confirmation... <01><06><20><00><00><01><43> vfdmod: application closed.