tomasz@debian:~$ sudo dmesg [sudo] password for tomasz: [ 0.000000] microcode: microcode updated early to revision 0x28, date = 2019-11-12 [ 0.000000] Linux version 4.19.0-21-rt-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP PREEMPT RT Debian 4.19.249-2 (2022-06-30) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-21-rt-amd64 root=UUID=88cad720-5c74-4890-b4cb-9ab4568cc4d9 ro quiet [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7133fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c7134000-0x00000000c713afff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000c713b000-0x00000000c79d7fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c79d8000-0x00000000c7c6cfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c7c6d000-0x00000000d88a9fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d88aa000-0x00000000d8917fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d8918000-0x00000000d8930fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000d8931000-0x00000000d936efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000d936f000-0x00000000d9f6dfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d9f6e000-0x00000000d9ffffff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011edfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by Acer Inc. [ 0.000000] efi: ESRT=0xd9f6c918 ACPI=0xd891d000 ACPI 2.0=0xd891d000 SMBIOS=0xf04c0 MPS=0xfd4b0 [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Acer Veriton X4630G/Veriton X4630G, BIOS P22-A3 04/15/2015 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2893.180 MHz processor [ 0.003270] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.003272] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.003278] last_pfn = 0x11ee00 max_arch_pfn = 0x400000000 [ 0.003281] MTRR default type: uncachable [ 0.003282] MTRR fixed ranges enabled: [ 0.003283] 00000-9FFFF write-back [ 0.003283] A0000-BFFFF uncachable [ 0.003284] C0000-CFFFF write-protect [ 0.003284] D0000-DFFFF uncachable [ 0.003285] E0000-FFFFF write-protect [ 0.003285] MTRR variable ranges enabled: [ 0.003286] 0 base 0000000000 mask 7F00000000 write-back [ 0.003287] 1 base 0100000000 mask 7FE0000000 write-back [ 0.003287] 2 base 00E0000000 mask 7FE0000000 uncachable [ 0.003288] 3 base 00DC000000 mask 7FFC000000 uncachable [ 0.003288] 4 base 00DB000000 mask 7FFF000000 uncachable [ 0.003289] 5 base 011F000000 mask 7FFF000000 uncachable [ 0.003289] 6 base 011EE00000 mask 7FFFE00000 uncachable [ 0.003290] 7 disabled [ 0.003290] 8 disabled [ 0.003290] 9 disabled [ 0.004047] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.004142] e820: update [mem 0xdb000000-0xffffffff] usable ==> reserved [ 0.004146] last_pfn = 0xd88aa max_arch_pfn = 0x400000000 [ 0.010979] found SMP MP-table at [mem 0x000fd750-0x000fd75f] [ 0.010992] Using GB pages for direct mapping [ 0.011479] RAMDISK: [mem 0x30907000-0x3447afff] [ 0.011482] ACPI: Early table checksum verification disabled [ 0.011484] ACPI: RSDP 0x00000000D891D000 000024 (v02 ACRSYS) [ 0.011487] ACPI: XSDT 0x00000000D891D090 0000A4 (v01 ACRSYS ACRPRDCT 01072009 AMI 00010013) [ 0.011492] ACPI: FACP 0x00000000D892BA38 00010C (v05 ACRSYS ACRPRDCT 01072009 AMI 00010013) [ 0.011496] ACPI: DSDT 0x00000000D891D1C8 00E86C (v02 ACRSYS ACRPRDCT 00000028 INTL 20120711) [ 0.011498] ACPI: FACS 0x00000000D936D080 000040 [ 0.011499] ACPI: APIC 0x00000000D892BB48 000072 (v03 ACRSYS ACRPRDCT 01072009 AMI 00010013) [ 0.011501] ACPI: FPDT 0x00000000D892BBC0 000044 (v01 ACRSYS ACRPRDCT 01072009 AMI 00010013) [ 0.011503] ACPI: TCPA 0x00000000D892BC08 000032 (v02 APTIO4 NAPAASF 00000001 MSFT 01000013) [ 0.011505] ACPI: MSDM 0x00000000D892BC40 000055 (v03 ACRSYS ACRPRDCT 01072009 AMI 00010013) [ 0.011507] ACPI: DBGP 0x00000000D892BC98 000034 (v01 ACRSYS ACRPRDCT 00000000 MSFT 00000005) [ 0.011509] ACPI: SLIC 0x00000000D892BCD0 000176 (v01 ACRSYS ACRPRDCT 01072000 AMI 00010013) [ 0.011511] ACPI: SSDT 0x00000000D892BE48 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711) [ 0.011513] ACPI: SSDT 0x00000000D892C388 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711) [ 0.011515] ACPI: MCFG 0x00000000D892CE60 00003C (v01 ACRSYS ACRPRDCT 01072009 MSFT 00000097) [ 0.011517] ACPI: HPET 0x00000000D892CEA0 000038 (v01 ACRSYS ACRPRDCT 01072009 AMI. 00000005) [ 0.011519] ACPI: SSDT 0x00000000D892CED8 00036D (v01 SataRe SataTabl 00001000 INTL 20120711) [ 0.011521] ACPI: SSDT 0x00000000D892D248 003528 (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [ 0.011523] ACPI: ASF! 0x00000000D8930770 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.011525] ACPI: DMAR 0x00000000D8930818 0000B8 (v01 INTEL HSW 00000001 INTL 00000001) [ 0.011527] ACPI: BGRT 0x00000000D89308D0 000038 (v00 ACRSYS ACRPRDCT 01072009 AMI 00010013) [ 0.011529] ACPI: Reserving FACP table memory at [mem 0xd892ba38-0xd892bb43] [ 0.011529] ACPI: Reserving DSDT table memory at [mem 0xd891d1c8-0xd892ba33] [ 0.011530] ACPI: Reserving FACS table memory at [mem 0xd936d080-0xd936d0bf] [ 0.011530] ACPI: Reserving APIC table memory at [mem 0xd892bb48-0xd892bbb9] [ 0.011531] ACPI: Reserving FPDT table memory at [mem 0xd892bbc0-0xd892bc03] [ 0.011531] ACPI: Reserving TCPA table memory at [mem 0xd892bc08-0xd892bc39] [ 0.011532] ACPI: Reserving MSDM table memory at [mem 0xd892bc40-0xd892bc94] [ 0.011532] ACPI: Reserving DBGP table memory at [mem 0xd892bc98-0xd892bccb] [ 0.011533] ACPI: Reserving SLIC table memory at [mem 0xd892bcd0-0xd892be45] [ 0.011533] ACPI: Reserving SSDT table memory at [mem 0xd892be48-0xd892c380] [ 0.011534] ACPI: Reserving SSDT table memory at [mem 0xd892c388-0xd892ce5f] [ 0.011534] ACPI: Reserving MCFG table memory at [mem 0xd892ce60-0xd892ce9b] [ 0.011535] ACPI: Reserving HPET table memory at [mem 0xd892cea0-0xd892ced7] [ 0.011535] ACPI: Reserving SSDT table memory at [mem 0xd892ced8-0xd892d244] [ 0.011536] ACPI: Reserving SSDT table memory at [mem 0xd892d248-0xd893076f] [ 0.011536] ACPI: Reserving ASF! table memory at [mem 0xd8930770-0xd8930814] [ 0.011537] ACPI: Reserving DMAR table memory at [mem 0xd8930818-0xd89308cf] [ 0.011537] ACPI: Reserving BGRT table memory at [mem 0xd89308d0-0xd8930907] [ 0.011549] ACPI: Local APIC address 0xfee00000 [ 0.011625] No NUMA configuration found [ 0.011626] Faking a node at [mem 0x0000000000000000-0x000000011edfffff] [ 0.011629] NODE_DATA(0) allocated [mem 0x11edfb000-0x11edfffff] [ 0.011650] Zone ranges: [ 0.011650] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.011651] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.011652] Normal [mem 0x0000000100000000-0x000000011edfffff] [ 0.011652] Device empty [ 0.011653] Movable zone start for each node [ 0.011653] Early memory node ranges [ 0.011654] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.011654] node 0: [mem 0x0000000000059000-0x000000000009efff] [ 0.011655] node 0: [mem 0x0000000000100000-0x00000000c7133fff] [ 0.011655] node 0: [mem 0x00000000c713b000-0x00000000c79d7fff] [ 0.011656] node 0: [mem 0x00000000c7c6d000-0x00000000d88a9fff] [ 0.011656] node 0: [mem 0x0000000100000000-0x000000011edfffff] [ 0.012127] Zeroed struct page in unavailable ranges: 35925 pages [ 0.012128] Initmem setup node 0 [mem 0x0000000000001000-0x000000011edfffff] [ 0.012129] On node 0 totalpages: 1012651 [ 0.012130] DMA zone: 64 pages used for memmap [ 0.012130] DMA zone: 28 pages reserved [ 0.012131] DMA zone: 3997 pages, LIFO batch:0 [ 0.012205] DMA32 zone: 13785 pages used for memmap [ 0.012206] DMA32 zone: 882190 pages, LIFO batch:63 [ 0.029024] Normal zone: 1976 pages used for memmap [ 0.029025] Normal zone: 126464 pages, LIFO batch:31 [ 0.031285] Reserving Intel graphics memory at [mem 0xdb200000-0xdf1fffff] [ 0.031363] ACPI: PM-Timer IO Port: 0x1808 [ 0.031365] ACPI: Local APIC address 0xfee00000 [ 0.031370] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.031384] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.031386] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.031387] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.031388] ACPI: IRQ0 used by override. [ 0.031388] ACPI: IRQ9 used by override. [ 0.031390] Using ACPI (MADT) for SMP configuration information [ 0.031391] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.031394] TSC deadline timer available [ 0.031395] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.031417] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.031418] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.031419] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.031419] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.031421] PM: Registered nosave memory: [mem 0xc7134000-0xc713afff] [ 0.031422] PM: Registered nosave memory: [mem 0xc79d8000-0xc7c6cfff] [ 0.031423] PM: Registered nosave memory: [mem 0xd88aa000-0xd8917fff] [ 0.031423] PM: Registered nosave memory: [mem 0xd8918000-0xd8930fff] [ 0.031423] PM: Registered nosave memory: [mem 0xd8931000-0xd936efff] [ 0.031424] PM: Registered nosave memory: [mem 0xd936f000-0xd9f6dfff] [ 0.031424] PM: Registered nosave memory: [mem 0xd9f6e000-0xd9ffffff] [ 0.031424] PM: Registered nosave memory: [mem 0xda000000-0xdaffffff] [ 0.031425] PM: Registered nosave memory: [mem 0xdb000000-0xdf1fffff] [ 0.031425] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff] [ 0.031425] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.031426] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.031426] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.031426] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.031427] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.031427] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.031427] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.031428] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.031428] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.031428] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.031428] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.031432] [mem 0xdf200000-0xf7ffffff] available for PCI devices [ 0.031433] Booting paravirtualized kernel on bare hardware [ 0.031435] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.117066] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.117228] percpu: Embedded 51 pages/cpu s169728 r8192 d30976 u524288 [ 0.117233] pcpu-alloc: s169728 r8192 d30976 u524288 alloc=1*2097152 [ 0.117234] pcpu-alloc: [0] 0 1 2 3 [ 0.117252] Built 1 zonelists, mobility grouping on. Total pages: 996798 [ 0.117252] Policy zone: Normal [ 0.117253] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-21-rt-amd64 root=UUID=88cad720-5c74-4890-b4cb-9ab4568cc4d9 ro quiet [ 0.120887] Calgary: detecting Calgary via BIOS EBDA area [ 0.120888] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.131436] Memory: 3832532K/4050604K available (10248K kernel code, 1308K rwdata, 3336K rodata, 1576K init, 2192K bss, 218072K reserved, 0K cma-reserved) [ 0.131756] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.131774] Kernel/User page tables isolation: enabled [ 0.131810] ftrace: allocating 31943 entries in 125 pages [ 0.144108] rcu: Preemptible hierarchical RCU implementation. [ 0.144109] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. [ 0.144109] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.144110] No expedited grace period (rcu_normal_after_boot). [ 0.144110] Tasks RCU enabled. [ 0.144110] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.146707] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16 [ 0.146917] random: crng init done [ 0.146935] Console: colour dummy device 80x25 [ 0.146940] console [tty0] enabled [ 0.146952] ACPI: Core revision 20180810 [ 0.147133] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.147142] hpet clockevent registered [ 0.147146] APIC: Switch to symmetric I/O mode setup [ 0.147147] DMAR: Host address width 39 [ 0.147148] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.147152] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a [ 0.147152] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.147155] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da [ 0.147155] DMAR: RMRR base: 0x000000d9e90000 end: 0x000000d9e9ffff [ 0.147156] DMAR: RMRR base: 0x000000db000000 end: 0x000000df1fffff [ 0.147157] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1 [ 0.147158] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.147158] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.147593] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.147594] x2apic enabled [ 0.147600] Switched APIC routing to cluster x2apic. [ 0.148009] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.167152] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29b41882dea, max_idle_ns: 440795239059 ns [ 0.167163] Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.36 BogoMIPS (lpj=11572720) [ 0.167164] pid_max: default: 32768 minimum: 301 [ 0.167190] Security Framework initialized [ 0.167190] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.167204] AppArmor: AppArmor initialized [ 0.168523] Dentry cache hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.169763] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.169785] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.169797] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.169994] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.169994] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.170013] CPU0: Thermal monitoring enabled (TM1) [ 0.170024] process: using mwait in idle threads [ 0.170026] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.170027] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.170028] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.170029] Spectre V2 : Mitigation: Retpolines [ 0.170029] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.170030] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.170036] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.170037] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.170058] MDS: Mitigation: Clear CPU buffers [ 0.170059] SRBDS: Mitigation: Microcode [ 0.170216] Freeing SMP alternatives memory: 20K [ 0.171202] smpboot: CPU0: Intel(R) Core(TM) i5-4460S CPU @ 2.90GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.171305] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.171345] ... version: 3 [ 0.171346] ... bit width: 48 [ 0.171346] ... generic registers: 8 [ 0.171347] ... value mask: 0000ffffffffffff [ 0.171348] ... max period: 00007fffffffffff [ 0.171348] ... fixed-purpose events: 3 [ 0.171349] ... event mask: 00000007000000ff [ 0.171395] rcu: Hierarchical SRCU implementation. [ 0.171978] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.172017] smp: Bringing up secondary CPUs ... [ 0.172115] x86: Booting SMP configuration: [ 0.172115] .... node #0, CPUs: #1 #2 #3 [ 0.176877] smp: Brought up 1 node, 4 CPUs [ 0.176877] smpboot: Max logical packages: 1 [ 0.176877] smpboot: Total of 4 processors activated (23145.44 BogoMIPS) [ 0.179313] devtmpfs: initialized [ 0.179313] x86/mm: Memory block size: 128MB [ 0.179665] PM: Registering ACPI NVS region [mem 0xc7134000-0xc713afff] (28672 bytes) [ 0.179665] PM: Registering ACPI NVS region [mem 0xd8931000-0xd936efff] (10739712 bytes) [ 0.179665] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.179665] futex hash table entries: 1024 (order: 5, 131072 bytes) [ 0.179665] pinctrl core: initialized pinctrl subsystem [ 0.179665] NET: Registered protocol family 16 [ 0.179665] audit: initializing netlink subsys (disabled) [ 0.179665] audit: type=2000 audit(1681554843.032:1): state=initialized audit_enabled=0 res=1 [ 0.179665] cpuidle: using governor ladder [ 0.179665] cpuidle: using governor menu [ 0.179665] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.179665] ACPI: bus type PCI registered [ 0.179665] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.179665] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.179665] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.179665] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override. [ 0.179665] PCI: Using configuration type 1 for base access [ 0.179665] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 0.179888] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.179888] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.179888] ACPI: Added _OSI(Module Device) [ 0.179888] ACPI: Added _OSI(Processor Device) [ 0.179888] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.179888] ACPI: Added _OSI(Processor Aggregator Device) [ 0.179888] ACPI: Added _OSI(Linux-Dell-Video) [ 0.179888] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.188083] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.188703] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.191700] ACPI: Dynamic OEM Table Load: [ 0.191705] ACPI: SSDT 0xFFFF8BB099095C00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.192065] ACPI: Dynamic OEM Table Load: [ 0.192069] ACPI: SSDT 0xFFFF8BB099069800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.192430] ACPI: Dynamic OEM Table Load: [ 0.192433] ACPI: SSDT 0xFFFF8BB099268E00 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.193408] ACPI: Interpreter enabled [ 0.193432] ACPI: (supports S0 S3 S4 S5) [ 0.193433] ACPI: Using IOAPIC for interrupt routing [ 0.193456] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.193756] ACPI: Enabled 7 GPEs in block 00 to 3F [ 0.203049] ACPI: Power Resource [FN00] (off) [ 0.203114] ACPI: Power Resource [FN01] (off) [ 0.203238] ACPI: Power Resource [FN02] (off) [ 0.203311] ACPI: Power Resource [FN03] (off) [ 0.203375] ACPI: Power Resource [FN04] (off) [ 0.204071] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.204075] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.204595] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 0.204596] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.204957] PCI host bridge to bus 0000:00 [ 0.204959] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.204960] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.204961] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.204962] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.204963] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.204964] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.204964] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.204965] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window] [ 0.204967] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.204974] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000 [ 0.205064] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000 [ 0.205073] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit] [ 0.205078] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.205081] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.205091] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.205156] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 0.205163] pci 0000:00:03.0: reg 0x10: [mem 0xf7d14000-0xf7d17fff 64bit] [ 0.205264] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.205283] pci 0000:00:14.0: reg 0x10: [mem 0xf7d00000-0xf7d0ffff 64bit] [ 0.205337] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.205408] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.205428] pci 0000:00:16.0: reg 0x10: [mem 0xf7d1f000-0xf7d1f00f 64bit] [ 0.205484] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.205561] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.205581] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d1c000-0xf7d1c3ff] [ 0.205656] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.205730] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 0.205747] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d10000-0xf7d13fff 64bit] [ 0.205803] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.205875] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.205955] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.206069] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400 [ 0.206149] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.206261] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.206281] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d1b000-0xf7d1b3ff] [ 0.206356] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.206435] pci 0000:00:1f.0: [8086:8c50] type 00 class 0x060100 [ 0.206595] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.206610] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7] [ 0.206617] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3] [ 0.206623] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097] [ 0.206630] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083] [ 0.206636] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.206643] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d1a000-0xf7d1a7ff] [ 0.206675] pci 0000:00:1f.2: PME# supported from D3hot [ 0.206745] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.206761] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d19000-0xf7d190ff 64bit] [ 0.206779] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.206913] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.207041] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.207139] pci 0000:02:00.0: reg 0x10: [io 0xe300-0xe3ff] [ 0.207254] pci 0000:02:00.0: reg 0x18: [mem 0xf7c0f000-0xf7c0ffff 64bit] [ 0.207323] pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref] [ 0.207562] pci 0000:02:00.0: supports D1 D2 [ 0.207563] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.207760] pci 0000:02:00.1: [10ec:816a] type 00 class 0x070002 [ 0.207856] pci 0000:02:00.1: reg 0x10: [io 0xe200-0xe2ff] [ 0.207967] pci 0000:02:00.1: reg 0x18: [mem 0xf7c0e000-0xf7c0efff 64bit] [ 0.208035] pci 0000:02:00.1: reg 0x20: [mem 0xf7c08000-0xf7c0bfff 64bit] [ 0.208329] pci 0000:02:00.1: supports D1 D2 [ 0.208330] pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.208482] pci 0000:02:00.2: [10ec:816b] type 00 class 0x070002 [ 0.208578] pci 0000:02:00.2: reg 0x10: [io 0xe100-0xe1ff] [ 0.208689] pci 0000:02:00.2: reg 0x18: [mem 0xf7c0d000-0xf7c0dfff 64bit] [ 0.208757] pci 0000:02:00.2: reg 0x20: [mem 0xf7c04000-0xf7c07fff 64bit] [ 0.209031] pci 0000:02:00.2: supports D1 D2 [ 0.209032] pci 0000:02:00.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.209220] pci 0000:02:00.3: [10ec:816c] type 00 class 0x0c0701 [ 0.209254] pci 0000:02:00.3: reg 0x10: [io 0xe000-0xe0ff] [ 0.209365] pci 0000:02:00.3: reg 0x18: [mem 0xf7c0c000-0xf7c0c0ff 64bit] [ 0.209433] pci 0000:02:00.3: reg 0x20: [mem 0xf7c00000-0xf7c03fff 64bit] [ 0.209739] pci 0000:02:00.3: supports D1 D2 [ 0.209740] pci 0000:02:00.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.209956] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.209960] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff] [ 0.209963] pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.209967] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.210917] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 12 14 15) [ 0.210966] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 12 14 15) [ 0.211018] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 12 14 15) [ 0.211070] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 12 14 15) [ 0.211117] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 12 14 15) *0, disabled. [ 0.211180] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 *11) [ 0.211230] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 10 12 14 15) [ 0.211276] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 10 12 14 15) [ 0.211656] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.211656] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.211656] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.211656] vgaarb: loaded [ 0.211656] pps_core: LinuxPPS API ver. 1 registered [ 0.211656] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.211656] PTP clock support registered [ 0.211656] EDAC MC: Ver: 3.0.0 [ 0.211656] Registered efivars operations [ 0.211656] PCI: Using ACPI for IRQ routing [ 0.212449] PCI: pci_cache_line_size set to 64 bytes [ 0.212549] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.212550] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.212551] e820: reserve RAM buffer [mem 0xc7134000-0xc7ffffff] [ 0.212552] e820: reserve RAM buffer [mem 0xc79d8000-0xc7ffffff] [ 0.212553] e820: reserve RAM buffer [mem 0xd88aa000-0xdbffffff] [ 0.212554] e820: reserve RAM buffer [mem 0x11ee00000-0x11fffffff] [ 0.212647] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.212647] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.216184] clocksource: Switched to clocksource tsc-early [ 0.226487] VFS: Disk quotas dquot_6.6.0 [ 0.226502] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.226639] AppArmor: AppArmor Filesystem Enabled [ 0.226655] pnp: PnP ACPI init [ 0.227027] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.227029] system 00:00: [io 0xffff] has been reserved [ 0.227034] system 00:00: [io 0xffff] has been reserved [ 0.227036] system 00:00: [io 0xffff] has been reserved [ 0.227037] system 00:00: [io 0x1c00-0x1cfe] has been reserved [ 0.227038] system 00:00: [io 0x1d00-0x1dfe] has been reserved [ 0.227040] system 00:00: [io 0x1e00-0x1efe] has been reserved [ 0.227041] system 00:00: [io 0x1f00-0x1ffe] has been reserved [ 0.227043] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.227044] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.227049] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.227072] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.227120] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.227123] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.227313] system 00:03: [io 0x0a00-0x0a0f] has been reserved [ 0.227315] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.227316] system 00:03: [io 0x0a20-0x0a2f] has been reserved [ 0.227318] system 00:03: [io 0x0a30-0x0a3f] has been reserved [ 0.227319] system 00:03: [io 0x0a50-0x0a5f] has been reserved [ 0.227323] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.227586] pnp 00:04: [dma 0 disabled] [ 0.227621] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.227876] pnp 00:05: [dma 0 disabled] [ 0.227905] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.228249] pnp 00:06: [dma 0 disabled] [ 0.228368] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.228416] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.228419] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.228455] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.228793] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.228794] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.228796] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.228797] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.228799] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.228800] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.228802] system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.228803] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.228805] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 0.228806] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.228808] system 00:09: [mem 0xf7fdf000-0xf7fdffff] has been reserved [ 0.228809] system 00:09: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.228813] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.229020] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c31 (active) [ 0.229080] pnp: PnP ACPI: found 11 devices [ 0.234812] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.234818] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.234820] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 0.234821] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000 [ 0.234830] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdf200000-0xdf3fffff] [ 0.234837] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdf400000-0xdf5fffff 64bit pref] [ 0.234839] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.234841] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.234849] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.234853] pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf3fffff] [ 0.234857] pci 0000:00:1c.0: bridge window [mem 0xdf400000-0xdf5fffff 64bit pref] [ 0.234862] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.234864] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff] [ 0.234868] pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.234871] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.234877] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.234878] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.234879] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.234880] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.234881] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.234882] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.234882] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window] [ 0.234883] pci_bus 0000:00: resource 11 [mem 0xdf200000-0xfeafffff window] [ 0.234885] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.234885] pci_bus 0000:01: resource 1 [mem 0xdf200000-0xdf3fffff] [ 0.234886] pci_bus 0000:01: resource 2 [mem 0xdf400000-0xdf5fffff 64bit pref] [ 0.234887] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.234888] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 0.234889] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.234986] NET: Registered protocol family 2 [ 0.235069] IP idents hash table entries: 65536 (order: 7, 524288 bytes) [ 0.235604] tcp_listen_portaddr_hash hash table entries: 2048 (order: 5, 131072 bytes) [ 0.235644] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.235762] TCP bind hash table entries: 32768 (order: 8, 1835008 bytes) [ 0.236073] TCP: Hash tables configured (established 32768 bind 32768) [ 0.236109] UDP hash table entries: 2048 (order: 6, 262144 bytes) [ 0.236171] UDP-Lite hash table entries: 2048 (order: 6, 262144 bytes) [ 0.236246] NET: Registered protocol family 1 [ 0.236250] NET: Registered protocol family 44 [ 0.236258] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.236845] PCI: CLS 64 bytes, default 64 [ 0.236888] Unpacking initramfs... [ 0.957135] Freeing initrd memory: 60880K [ 0.957181] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.957182] software IO TLB: mapped [mem 0xd48aa000-0xd88aa000] (64MB) [ 0.957789] Initialise system trusted keyrings [ 0.957796] Key type blacklist registered [ 0.957842] workingset: timestamp_bits=40 max_order=20 bucket_order=0 [ 0.959146] zbud: loaded [ 1.089639] Key type asymmetric registered [ 1.089641] Asymmetric key parser 'x509' registered [ 1.089648] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.089668] io scheduler noop registered [ 1.089668] io scheduler deadline registered [ 1.089692] io scheduler cfq registered (default) [ 1.089693] io scheduler mq-deadline registered [ 1.090378] pcieport 0000:00:1c.0: Signaling PME with IRQ 26 [ 1.090409] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ [ 1.090689] pcieport 0000:00:1c.2: Signaling PME with IRQ 27 [ 1.090748] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.090762] efifb: probing for efifb [ 1.090781] efifb: framebuffer at 0xe0000000, using 8128k, total 8128k [ 1.090782] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 1.090782] efifb: scrolling: redraw [ 1.090783] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.093941] Console: switching to colour frame buffer device 240x67 [ 1.097027] fb0: EFI VGA frame buffer device [ 1.097035] intel_idle: MWAIT substates: 0x42120 [ 1.097036] intel_idle: v0.4.1 model 0x3C [ 1.097189] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.097421] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.118452] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.139543] 00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.160507] 0000:02:00.1: ttyS2 at I/O 0xe200 (irq = 19, base_baud = 115200) is a 16550A [ 1.181176] 0000:02:00.2: ttyS3 at I/O 0xe100 (irq = 16, base_baud = 115200) is a 16550A [ 1.181412] Linux agpgart interface v0.103 [ 1.181469] AMD IOMMUv2 driver by Joerg Roedel [ 1.181469] AMD IOMMUv2 functionality not available on this system [ 1.181773] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.181774] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.182009] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.182102] mousedev: PS/2 mouse device common for all mice [ 1.182146] rtc_cmos 00:01: RTC can wake from S4 [ 1.182375] rtc_cmos 00:01: registered as rtc0 [ 1.182388] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.182397] intel_pstate: Intel P-state driver initializing [ 1.184234] NET: Registered protocol family 10 [ 1.199613] Segment Routing with IPv6 [ 1.199634] mip6: Mobile IPv6 [ 1.199637] NET: Registered protocol family 17 [ 1.199733] mpls_gso: MPLS GSO support [ 1.200105] mce: Using 9 MCE banks [ 1.200165] microcode: sig=0x306c3, pf=0x2, revision=0x28 [ 1.200249] microcode: Microcode Update Driver: v2.2. [ 1.200261] sched_clock: Marking stable (1199994075, 250299)->(1203008702, -2764328) [ 1.200503] registered taskstats version 1 [ 1.200512] Loading compiled-in X.509 certificates [ 1.201722] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.232353] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 1.232363] Loaded X.509 cert 'Debian Secure Boot Signer 2021 - linux: 4b6ef5abca669825178e052c84667ccbc0531f8c' [ 1.232377] zswap: loaded using pool lzo/zbud [ 1.232564] AppArmor: AppArmor sha1 policy hashing enabled [ 1.232951] rtc_cmos 00:01: setting system clock to 2023-04-15 10:34:04 UTC (1681554844) [ 1.234075] Freeing unused kernel image memory: 1576K [ 1.234107] Write protecting the kernel read-only data: 16384k [ 1.234731] Freeing unused kernel image memory: 2032K [ 1.234957] Freeing unused kernel image memory: 760K [ 1.240764] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.240765] x86/mm: Checking user space page tables [ 1.246274] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.246275] Run /init as init process [ 1.306350] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 1.323176] ACPI: Power Button [PWRB] [ 1.351412] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.352930] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 1.354268] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.354666] SCSI subsystem initialized [ 1.359419] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.359420] ACPI: Thermal Zone [TZ00] (28 C) [ 1.362917] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20180810/utaddress-213) [ 1.362921] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.362928] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20180810/utaddress-213) [ 1.362930] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.362931] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20180810/utaddress-213) [ 1.362933] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20180810/utaddress-213) [ 1.362934] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.362935] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20180810/utaddress-213) [ 1.362936] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20180810/utaddress-213) [ 1.362938] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.362939] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 1.363357] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.363358] ACPI: Thermal Zone [TZ01] (30 C) [ 1.364882] ACPI: bus type USB registered [ 1.366676] usbcore: registered new interface driver usbfs [ 1.367481] usbcore: registered new interface driver hub [ 1.367659] usbcore: registered new device driver usb [ 1.371179] ACPI: Power Button [PWRF] [ 1.396169] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.397680] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.397801] libata version 3.00 loaded. [ 1.400283] ehci-pci: EHCI PCI platform driver [ 1.400533] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.400594] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.400609] ehci-pci 0000:00:1a.0: debug port 2 [ 1.402037] ahci 0000:00:1f.2: version 3.0 [ 1.402201] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode [ 1.402203] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 1.404640] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.404688] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d1c000 [ 1.405425] r8169 0000:02:00.0 eth0: RTL8168dp/8111dp, b8:ae:ed:b7:47:18, XID 28b00000, IRQ 28 [ 1.405426] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.411940] scsi host0: ahci [ 1.412250] scsi host1: ahci [ 1.412391] scsi host2: ahci [ 1.412488] scsi host3: ahci [ 1.412565] scsi host4: ahci [ 1.412640] scsi host5: ahci [ 1.412695] ata1: SATA max UDMA/133 abar m2048@0xf7d1a000 port 0xf7d1a100 irq 29 [ 1.412696] ata2: DUMMY [ 1.412698] ata3: SATA max UDMA/133 abar m2048@0xf7d1a000 port 0xf7d1a200 irq 29 [ 1.412699] ata4: DUMMY [ 1.412700] ata5: DUMMY [ 1.412700] ata6: DUMMY [ 1.419252] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.419560] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.419562] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.419563] usb usb1: Product: EHCI Host Controller [ 1.419564] usb usb1: Manufacturer: Linux 4.19.0-21-rt-amd64 ehci_hcd [ 1.419564] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.419777] hub 1-0:1.0: USB hub found [ 1.419790] hub 1-0:1.0: 2 ports detected [ 1.420021] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.420028] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.421093] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 1.421098] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.421406] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.421408] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.421409] usb usb2: Product: xHCI Host Controller [ 1.421409] usb usb2: Manufacturer: Linux 4.19.0-21-rt-amd64 xhci-hcd [ 1.421410] usb usb2: SerialNumber: 0000:00:14.0 [ 1.421511] hub 2-0:1.0: USB hub found [ 1.421534] hub 2-0:1.0: 12 ports detected [ 1.423355] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.423358] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 1.423369] ehci-pci 0000:00:1d.0: debug port 2 [ 1.423377] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.423380] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.423389] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.423437] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 1.423438] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.423439] usb usb4: Product: xHCI Host Controller [ 1.423439] usb usb4: Manufacturer: Linux 4.19.0-21-rt-amd64 xhci-hcd [ 1.423440] usb usb4: SerialNumber: 0000:00:14.0 [ 1.423534] hub 4-0:1.0: USB hub found [ 1.423639] hub 4-0:1.0: 6 ports detected [ 1.427286] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.427404] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d1b000 [ 1.443250] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.443303] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.443304] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.443305] usb usb3: Product: EHCI Host Controller [ 1.443305] usb usb3: Manufacturer: Linux 4.19.0-21-rt-amd64 ehci_hcd [ 1.443306] usb usb3: SerialNumber: 0000:00:1d.0 [ 1.443480] hub 3-0:1.0: USB hub found [ 1.443486] hub 3-0:1.0: 2 ports detected [ 1.450901] checking generic (e0000000 7f0000) vs hw (e0000000 10000000) [ 1.450902] fb: switching to inteldrmfb from EFI VGA [ 1.450921] Console: switching to colour dummy device 80x25 [ 1.451028] [drm] Replacing VGA console driver [ 1.451796] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.451797] [drm] Driver supports precise vblank timestamp query. [ 1.452139] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.675159] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.687160] usb 2-8: new full-speed USB device number 2 using xhci_hcd [ 1.703158] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 1.725444] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.725460] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.726669] ata3.00: ATAPI: HL-DT-ST DVDRAM GHD0N, 1.00, max UDMA/133 [ 1.728068] ata3.00: configured for UDMA/133 [ 1.735291] ata1.00: ATA-8: SAMSUNG HM500JI, 2AC101C4, max UDMA/133 [ 1.735292] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.745140] ata1.00: configured for UDMA/133 [ 1.745236] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM500JI 01C4 PQ: 0 ANSI: 5 [ 1.746229] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GHD0N 1.00 PQ: 0 ANSI: 5 [ 1.787346] r8169 0000:02:00.0 enp2s0f0: renamed from eth0 [ 1.792288] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.792292] sd 0:0:0:0: [sda] Write Protect is off [ 1.792293] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.792300] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.796970] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0 [ 1.821254] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.821662] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 [ 1.834223] sr 2:0:0:0: [sr0] scsi3-mmc drive: 40x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.834239] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.834794] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 1.835532] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.835536] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.835839] hub 1-1:1.0: USB hub found [ 1.835902] hub 1-1:1.0: 6 ports detected [ 1.837308] usb 2-8: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01 [ 1.837324] usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.837326] usb 2-8: Product: USB Receiver [ 1.837328] usb 2-8: Manufacturer: Logitech [ 1.848530] hidraw: raw HID events driver (C) Jiri Kosina [ 1.850725] fbcon: inteldrmfb (fb0) is primary device [ 1.860710] sda: sda1 sda2 sda3 [ 1.861305] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.863565] usb 3-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.863567] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.863803] hub 3-1:1.0: USB hub found [ 1.863888] hub 3-1:1.0: 6 ports detected [ 1.923434] Console: switching to colour frame buffer device 240x67 [ 1.950469] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.967256] tsc: Refined TSC clocksource calibration: 2893.303 MHz [ 1.967265] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b48c6eeb1, max_idle_ns: 440795229827 ns [ 1.967286] clocksource: Switched to clocksource tsc [ 1.978227] usbcore: registered new interface driver usbhid [ 1.978228] usbhid: USB HID core driver [ 1.979960] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/0003:046D:C534.0001/input/input4 [ 2.039768] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-8/input0 [ 2.040423] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.1/0003:046D:C534.0002/input/input5 [ 2.040682] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.1/0003:046D:C534.0002/input/input6 [ 2.099478] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.1/0003:046D:C534.0002/input/input7 [ 2.099869] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-8/input1 [ 2.995816] PM: Image not found (code -22) [ 3.194280] cryptd: max_cpu_qlen set to 1000 [ 3.337309] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 5.360574] systemd[1]: Inserted module 'autofs4' [ 5.714652] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 5.731473] systemd[1]: Detected architecture x86-64. [ 5.754426] systemd[1]: Set hostname to . [ 6.934612] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 6.934845] systemd[1]: Listening on Journal Audit Socket. [ 6.935120] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 6.935333] systemd[1]: Listening on Journal Socket. [ 6.974713] systemd[1]: Starting Set the console keyboard layout... [ 7.018037] systemd[1]: Starting Load Kernel Modules... [ 7.018941] systemd[1]: Mounting Kernel Debug File System... [ 7.558399] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 7.754269] systemd-journald[269]: Received request to flush runtime journal from PID 1 [ 8.710557] input: PC Speaker as /devices/platform/pcspkr/input/input10 [ 9.003656] parport_pc 00:06: reported by Plug and Play ACPI [ 9.003772] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 9.176010] ppdev: user-space parallel port driver [ 9.220221] tpm_tis 00:0a: 1.2 TPM (device-id 0xFE, rev-id 2) [ 9.242633] iTCO_vendor_support: vendor-support=0 [ 9.251826] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 9.251879] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860) [ 9.252028] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 9.256605] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.256663] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 9.310281] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 9.310282] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 9.310283] RAPL PMU: hw unit of domain package 2^-14 Joules [ 9.310284] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 9.310284] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 9.667889] version 39.2 [ 9.682711] ipmi device interface [ 10.101836] IPMI System Interface driver. [ 10.101906] ipmi_si: Unable to find any System Interface(s) [ 10.668190] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 10.668337] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 10.668439] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 10.728904] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11 [ 10.728981] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12 [ 10.729025] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13 [ 10.729068] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14 [ 10.729107] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15 [ 10.764505] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC662 rev3: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 10.764508] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 10.764509] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 10.764510] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 10.764511] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 10.764512] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 10.764513] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 10.764514] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ 10.781966] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16 [ 10.782022] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17 [ 10.782068] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18 [ 10.782113] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19 [ 10.782156] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20 [ 10.973031] intel_rapl: Found RAPL domain package [ 10.973035] intel_rapl: Found RAPL domain core [ 10.973037] intel_rapl: Found RAPL domain uncore [ 10.973039] intel_rapl: Found RAPL domain dram [ 10.973043] intel_rapl: RAPL package 0 domain package locked by BIOS [ 10.973052] intel_rapl: RAPL package 0 domain dram locked by BIOS [ 12.464489] Adding 999420k swap on /dev/sda3. Priority:-2 extents:1 across:999420k FS [ 15.524869] audit: type=1400 audit(1681554858.786:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=421 comm="apparmor_parser" [ 15.524873] audit: type=1400 audit(1681554858.786:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=421 comm="apparmor_parser" [ 15.524913] audit: type=1400 audit(1681554858.786:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=422 comm="apparmor_parser" [ 15.589531] audit: type=1400 audit(1681554858.850:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=423 comm="apparmor_parser" [ 15.589538] audit: type=1400 audit(1681554858.850:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=423 comm="apparmor_parser" [ 15.589542] audit: type=1400 audit(1681554858.850:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=423 comm="apparmor_parser" [ 15.608520] audit: type=1400 audit(1681554858.870:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=424 comm="apparmor_parser" [ 15.634510] audit: type=1400 audit(1681554858.894:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=425 comm="apparmor_parser" [ 15.679821] audit: type=1400 audit(1681554858.942:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=420 comm="apparmor_parser" [ 15.679824] audit: type=1400 audit(1681554858.942:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=420 comm="apparmor_parser" [ 18.409124] ec_master: loading out-of-tree module taints kernel. [ 18.409600] ec_master: module verification failed: signature and/or required key missing - tainting kernel [ 18.423805] EtherCAT: Master driver 1.5.2 unknown [ 18.423891] EtherCAT: 1 master waiting for devices. [ 18.456158] ec_generic: EtherCAT master generic Ethernet device module 1.5.2 unknown [ 18.456173] EtherCAT: Accepting B8:AE:ED:B7:47:18 as main device for master 0. [ 18.456185] ec_generic: Binding socket to interface 2 (enp2s0f0). [ 18.499238] EtherCAT 0: Starting EtherCAT-IDLE thread. [ 18.499406] EtherCAT 0: Link state of ecm0 changed to UP. [ 18.511309] EtherCAT WARNING 0: 1 datagram TIMED OUT! [ 19.511206] EtherCAT WARNING 0: 124 datagrams TIMED OUT! [ 20.511312] EtherCAT WARNING 0: 124 datagrams TIMED OUT! [ 21.515325] EtherCAT WARNING 0: 123 datagrams TIMED OUT! [ 22.515330] EtherCAT WARNING 0: 121 datagrams TIMED OUT! [ 23.515201] EtherCAT WARNING 0: 125 datagrams TIMED OUT! [ 24.523246] EtherCAT WARNING 0: 117 datagrams TIMED OUT! [ 25.132276] IPv6: ADDRCONF(NETDEV_UP): enp2s0f0: link is not ready [ 25.133215] RTL8211B Gigabit Ethernet r8169-200:00: attached PHY driver [RTL8211B Gigabit Ethernet] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE) [ 25.139207] EtherCAT 0: Link state of ecm0 changed to DOWN. [ 25.232527] IPv6: ADDRCONF(NETDEV_UP): enp2s0f0: link is not ready [ 25.233386] r8169 0000:02:00.0 enp2s0f0: Link is Down [ 26.304994] broken atomic modeset userspace detected, disabling atomic [ 26.823190] r8169 0000:02:00.0 enp2s0f0: Link is Up - 100Mbps/Full - flow control off [ 26.823202] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0f0: link becomes ready [ 26.823224] EtherCAT 0: Link state of ecm0 changed to UP. [ 26.831198] EtherCAT 0: 1 slave(s) responding on main device. [ 26.831202] EtherCAT 0: Slave states on main device: INIT. [ 26.831328] EtherCAT 0: Scanning bus. [ 26.863969] EtherCAT 0: Bus scanning completed in 32 ms. [ 26.863971] EtherCAT 0: Using slave 0 as DC reference clock. [ 26.871213] EtherCAT 0: Slave states on main device: PREOP. [ 30.106146] EtherCAT ERROR 0-0: SDO information error response while fetching SDO 0x0678! [ 30.106150] EtherCAT ERROR 0-0: SDO abort message 0x06010000: "Unsupported access to an object". tomasz@debian:~$ ethercat upload -p 0 -t int32 0x6064 0 0x0016336e 1454958 tomasz@debian:~$ sudo dmesg [ 0.000000] microcode: microcode updated early to revision 0x28, date = 2019-11-12 [ 0.000000] Linux version 4.19.0-21-rt-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP PREEMPT RT Debian 4.19.249-2 (2022-06-30) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-21-rt-amd64 root=UUID=88cad720-5c74-4890-b4cb-9ab4568cc4d9 ro quiet [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7133fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c7134000-0x00000000c713afff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000c713b000-0x00000000c79d7fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c79d8000-0x00000000c7c6cfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c7c6d000-0x00000000d88a9fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d88aa000-0x00000000d8917fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d8918000-0x00000000d8930fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000d8931000-0x00000000d936efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000d936f000-0x00000000d9f6dfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d9f6e000-0x00000000d9ffffff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011edfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by Acer Inc. [ 0.000000] efi: ESRT=0xd9f6c918 ACPI=0xd891d000 ACPI 2.0=0xd891d000 SMBIOS=0xf04c0 MPS=0xfd4b0 [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Acer Veriton X4630G/Veriton X4630G, BIOS P22-A3 04/15/2015 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2893.180 MHz processor [ 0.003270] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.003272] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.003278] last_pfn = 0x11ee00 max_arch_pfn = 0x400000000 [ 0.003281] MTRR default type: uncachable [ 0.003282] MTRR fixed ranges enabled: [ 0.003283] 00000-9FFFF write-back [ 0.003283] A0000-BFFFF uncachable [ 0.003284] C0000-CFFFF write-protect [ 0.003284] D0000-DFFFF uncachable [ 0.003285] E0000-FFFFF write-protect [ 0.003285] MTRR variable ranges enabled: [ 0.003286] 0 base 0000000000 mask 7F00000000 write-back [ 0.003287] 1 base 0100000000 mask 7FE0000000 write-back [ 0.003287] 2 base 00E0000000 mask 7FE0000000 uncachable [ 0.003288] 3 base 00DC000000 mask 7FFC000000 uncachable [ 0.003288] 4 base 00DB000000 mask 7FFF000000 uncachable [ 0.003289] 5 base 011F000000 mask 7FFF000000 uncachable [ 0.003289] 6 base 011EE00000 mask 7FFFE00000 uncachable [ 0.003290] 7 disabled [ 0.003290] 8 disabled [ 0.003290] 9 disabled [ 0.004047] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.004142] e820: update [mem 0xdb000000-0xffffffff] usable ==> reserved [ 0.004146] last_pfn = 0xd88aa max_arch_pfn = 0x400000000 [ 0.010979] found SMP MP-table at [mem 0x000fd750-0x000fd75f] [ 0.010992] Using GB pages for direct mapping [ 0.011479] RAMDISK: [mem 0x30907000-0x3447afff] [ 0.011482] ACPI: Early table checksum verification disabled [ 0.011484] ACPI: RSDP 0x00000000D891D000 000024 (v02 ACRSYS) [ 0.011487] ACPI: XSDT 0x00000000D891D090 0000A4 (v01 ACRSYS ACRPRDCT 01072009 AMI 00010013) [ 0.011492] ACPI: FACP 0x00000000D892BA38 00010C (v05 ACRSYS ACRPRDCT 01072009 AMI 00010013) [ 0.011496] ACPI: DSDT 0x00000000D891D1C8 00E86C (v02 ACRSYS ACRPRDCT 00000028 INTL 20120711) [ 0.011498] ACPI: FACS 0x00000000D936D080 000040 [ 0.011499] ACPI: APIC 0x00000000D892BB48 000072 (v03 ACRSYS ACRPRDCT 01072009 AMI 00010013) [ 0.011501] ACPI: FPDT 0x00000000D892BBC0 000044 (v01 ACRSYS ACRPRDCT 01072009 AMI 00010013) [ 0.011503] ACPI: TCPA 0x00000000D892BC08 000032 (v02 APTIO4 NAPAASF 00000001 MSFT 01000013) [ 0.011505] ACPI: MSDM 0x00000000D892BC40 000055 (v03 ACRSYS ACRPRDCT 01072009 AMI 00010013) [ 0.011507] ACPI: DBGP 0x00000000D892BC98 000034 (v01 ACRSYS ACRPRDCT 00000000 MSFT 00000005) [ 0.011509] ACPI: SLIC 0x00000000D892BCD0 000176 (v01 ACRSYS ACRPRDCT 01072000 AMI 00010013) [ 0.011511] ACPI: SSDT 0x00000000D892BE48 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711) [ 0.011513] ACPI: SSDT 0x00000000D892C388 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711) [ 0.011515] ACPI: MCFG 0x00000000D892CE60 00003C (v01 ACRSYS ACRPRDCT 01072009 MSFT 00000097) [ 0.011517] ACPI: HPET 0x00000000D892CEA0 000038 (v01 ACRSYS ACRPRDCT 01072009 AMI. 00000005) [ 0.011519] ACPI: SSDT 0x00000000D892CED8 00036D (v01 SataRe SataTabl 00001000 INTL 20120711) [ 0.011521] ACPI: SSDT 0x00000000D892D248 003528 (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [ 0.011523] ACPI: ASF! 0x00000000D8930770 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.011525] ACPI: DMAR 0x00000000D8930818 0000B8 (v01 INTEL HSW 00000001 INTL 00000001) [ 0.011527] ACPI: BGRT 0x00000000D89308D0 000038 (v00 ACRSYS ACRPRDCT 01072009 AMI 00010013) [ 0.011529] ACPI: Reserving FACP table memory at [mem 0xd892ba38-0xd892bb43] [ 0.011529] ACPI: Reserving DSDT table memory at [mem 0xd891d1c8-0xd892ba33] [ 0.011530] ACPI: Reserving FACS table memory at [mem 0xd936d080-0xd936d0bf] [ 0.011530] ACPI: Reserving APIC table memory at [mem 0xd892bb48-0xd892bbb9] [ 0.011531] ACPI: Reserving FPDT table memory at [mem 0xd892bbc0-0xd892bc03] [ 0.011531] ACPI: Reserving TCPA table memory at [mem 0xd892bc08-0xd892bc39] [ 0.011532] ACPI: Reserving MSDM table memory at [mem 0xd892bc40-0xd892bc94] [ 0.011532] ACPI: Reserving DBGP table memory at [mem 0xd892bc98-0xd892bccb] [ 0.011533] ACPI: Reserving SLIC table memory at [mem 0xd892bcd0-0xd892be45] [ 0.011533] ACPI: Reserving SSDT table memory at [mem 0xd892be48-0xd892c380] [ 0.011534] ACPI: Reserving SSDT table memory at [mem 0xd892c388-0xd892ce5f] [ 0.011534] ACPI: Reserving MCFG table memory at [mem 0xd892ce60-0xd892ce9b] [ 0.011535] ACPI: Reserving HPET table memory at [mem 0xd892cea0-0xd892ced7] [ 0.011535] ACPI: Reserving SSDT table memory at [mem 0xd892ced8-0xd892d244] [ 0.011536] ACPI: Reserving SSDT table memory at [mem 0xd892d248-0xd893076f] [ 0.011536] ACPI: Reserving ASF! table memory at [mem 0xd8930770-0xd8930814] [ 0.011537] ACPI: Reserving DMAR table memory at [mem 0xd8930818-0xd89308cf] [ 0.011537] ACPI: Reserving BGRT table memory at [mem 0xd89308d0-0xd8930907] [ 0.011549] ACPI: Local APIC address 0xfee00000 [ 0.011625] No NUMA configuration found [ 0.011626] Faking a node at [mem 0x0000000000000000-0x000000011edfffff] [ 0.011629] NODE_DATA(0) allocated [mem 0x11edfb000-0x11edfffff] [ 0.011650] Zone ranges: [ 0.011650] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.011651] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.011652] Normal [mem 0x0000000100000000-0x000000011edfffff] [ 0.011652] Device empty [ 0.011653] Movable zone start for each node [ 0.011653] Early memory node ranges [ 0.011654] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.011654] node 0: [mem 0x0000000000059000-0x000000000009efff] [ 0.011655] node 0: [mem 0x0000000000100000-0x00000000c7133fff] [ 0.011655] node 0: [mem 0x00000000c713b000-0x00000000c79d7fff] [ 0.011656] node 0: [mem 0x00000000c7c6d000-0x00000000d88a9fff] [ 0.011656] node 0: [mem 0x0000000100000000-0x000000011edfffff] [ 0.012127] Zeroed struct page in unavailable ranges: 35925 pages [ 0.012128] Initmem setup node 0 [mem 0x0000000000001000-0x000000011edfffff] [ 0.012129] On node 0 totalpages: 1012651 [ 0.012130] DMA zone: 64 pages used for memmap [ 0.012130] DMA zone: 28 pages reserved [ 0.012131] DMA zone: 3997 pages, LIFO batch:0 [ 0.012205] DMA32 zone: 13785 pages used for memmap [ 0.012206] DMA32 zone: 882190 pages, LIFO batch:63 [ 0.029024] Normal zone: 1976 pages used for memmap [ 0.029025] Normal zone: 126464 pages, LIFO batch:31 [ 0.031285] Reserving Intel graphics memory at [mem 0xdb200000-0xdf1fffff] [ 0.031363] ACPI: PM-Timer IO Port: 0x1808 [ 0.031365] ACPI: Local APIC address 0xfee00000 [ 0.031370] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.031384] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.031386] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.031387] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.031388] ACPI: IRQ0 used by override. [ 0.031388] ACPI: IRQ9 used by override. [ 0.031390] Using ACPI (MADT) for SMP configuration information [ 0.031391] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.031394] TSC deadline timer available [ 0.031395] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.031417] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.031418] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.031419] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.031419] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.031421] PM: Registered nosave memory: [mem 0xc7134000-0xc713afff] [ 0.031422] PM: Registered nosave memory: [mem 0xc79d8000-0xc7c6cfff] [ 0.031423] PM: Registered nosave memory: [mem 0xd88aa000-0xd8917fff] [ 0.031423] PM: Registered nosave memory: [mem 0xd8918000-0xd8930fff] [ 0.031423] PM: Registered nosave memory: [mem 0xd8931000-0xd936efff] [ 0.031424] PM: Registered nosave memory: [mem 0xd936f000-0xd9f6dfff] [ 0.031424] PM: Registered nosave memory: [mem 0xd9f6e000-0xd9ffffff] [ 0.031424] PM: Registered nosave memory: [mem 0xda000000-0xdaffffff] [ 0.031425] PM: Registered nosave memory: [mem 0xdb000000-0xdf1fffff] [ 0.031425] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff] [ 0.031425] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.031426] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.031426] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.031426] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.031427] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.031427] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.031427] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.031428] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.031428] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.031428] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.031428] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.031432] [mem 0xdf200000-0xf7ffffff] available for PCI devices [ 0.031433] Booting paravirtualized kernel on bare hardware [ 0.031435] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.117066] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.117228] percpu: Embedded 51 pages/cpu s169728 r8192 d30976 u524288 [ 0.117233] pcpu-alloc: s169728 r8192 d30976 u524288 alloc=1*2097152 [ 0.117234] pcpu-alloc: [0] 0 1 2 3 [ 0.117252] Built 1 zonelists, mobility grouping on. Total pages: 996798 [ 0.117252] Policy zone: Normal [ 0.117253] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-21-rt-amd64 root=UUID=88cad720-5c74-4890-b4cb-9ab4568cc4d9 ro quiet [ 0.120887] Calgary: detecting Calgary via BIOS EBDA area [ 0.120888] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.131436] Memory: 3832532K/4050604K available (10248K kernel code, 1308K rwdata, 3336K rodata, 1576K init, 2192K bss, 218072K reserved, 0K cma-reserved) [ 0.131756] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.131774] Kernel/User page tables isolation: enabled [ 0.131810] ftrace: allocating 31943 entries in 125 pages [ 0.144108] rcu: Preemptible hierarchical RCU implementation. [ 0.144109] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. [ 0.144109] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.144110] No expedited grace period (rcu_normal_after_boot). [ 0.144110] Tasks RCU enabled. [ 0.144110] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.146707] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16 [ 0.146917] random: crng init done [ 0.146935] Console: colour dummy device 80x25 [ 0.146940] console [tty0] enabled [ 0.146952] ACPI: Core revision 20180810 [ 0.147133] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.147142] hpet clockevent registered [ 0.147146] APIC: Switch to symmetric I/O mode setup [ 0.147147] DMAR: Host address width 39 [ 0.147148] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.147152] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a [ 0.147152] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.147155] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da [ 0.147155] DMAR: RMRR base: 0x000000d9e90000 end: 0x000000d9e9ffff [ 0.147156] DMAR: RMRR base: 0x000000db000000 end: 0x000000df1fffff [ 0.147157] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1 [ 0.147158] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.147158] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.147593] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.147594] x2apic enabled [ 0.147600] Switched APIC routing to cluster x2apic. [ 0.148009] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.167152] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29b41882dea, max_idle_ns: 440795239059 ns [ 0.167163] Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.36 BogoMIPS (lpj=11572720) [ 0.167164] pid_max: default: 32768 minimum: 301 [ 0.167190] Security Framework initialized [ 0.167190] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.167204] AppArmor: AppArmor initialized [ 0.168523] Dentry cache hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.169763] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.169785] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.169797] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.169994] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.169994] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.170013] CPU0: Thermal monitoring enabled (TM1) [ 0.170024] process: using mwait in idle threads [ 0.170026] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.170027] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.170028] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.170029] Spectre V2 : Mitigation: Retpolines [ 0.170029] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.170030] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.170036] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.170037] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.170058] MDS: Mitigation: Clear CPU buffers [ 0.170059] SRBDS: Mitigation: Microcode [ 0.170216] Freeing SMP alternatives memory: 20K [ 0.171202] smpboot: CPU0: Intel(R) Core(TM) i5-4460S CPU @ 2.90GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.171305] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.171345] ... version: 3 [ 0.171346] ... bit width: 48 [ 0.171346] ... generic registers: 8 [ 0.171347] ... value mask: 0000ffffffffffff [ 0.171348] ... max period: 00007fffffffffff [ 0.171348] ... fixed-purpose events: 3 [ 0.171349] ... event mask: 00000007000000ff [ 0.171395] rcu: Hierarchical SRCU implementation. [ 0.171978] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.172017] smp: Bringing up secondary CPUs ... [ 0.172115] x86: Booting SMP configuration: [ 0.172115] .... node #0, CPUs: #1 #2 #3 [ 0.176877] smp: Brought up 1 node, 4 CPUs [ 0.176877] smpboot: Max logical packages: 1 [ 0.176877] smpboot: Total of 4 processors activated (23145.44 BogoMIPS) [ 0.179313] devtmpfs: initialized [ 0.179313] x86/mm: Memory block size: 128MB [ 0.179665] PM: Registering ACPI NVS region [mem 0xc7134000-0xc713afff] (28672 bytes) [ 0.179665] PM: Registering ACPI NVS region [mem 0xd8931000-0xd936efff] (10739712 bytes) [ 0.179665] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.179665] futex hash table entries: 1024 (order: 5, 131072 bytes) [ 0.179665] pinctrl core: initialized pinctrl subsystem [ 0.179665] NET: Registered protocol family 16 [ 0.179665] audit: initializing netlink subsys (disabled) [ 0.179665] audit: type=2000 audit(1681554843.032:1): state=initialized audit_enabled=0 res=1 [ 0.179665] cpuidle: using governor ladder [ 0.179665] cpuidle: using governor menu [ 0.179665] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.179665] ACPI: bus type PCI registered [ 0.179665] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.179665] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.179665] PCI: MMCONFIG at [mem 0xf8000000-0xethercat upload -p 0 -t int32 0x6064 0fbffffff] reserved in E820 [ 0.179665] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override. [ 0.179665] PCI: Using configuration type 1 for base access [ 0.179665] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 0.179888] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.179888] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.179888] ACPI: Added _OSI(Module Device) [ 0.179888] ACPI: Added _OSI(Processor Device) [ 0.179888] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.179888] ACPI: Added _OSI(Processor Aggregator Device) [ 0.179888] ACPI: Added _OSI(Linux-Dell-Video) [ 0.179888] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.188083] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.188703] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.191700] ACPI: Dynamic OEM Table Load: [ 0.191705] ACPI: SSDT 0xFFFF8BB099095C00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.192065] ACPI: Dynamic OEM Table Load: [ 0.192069] ACPI: SSDT 0xFFFF8BB099069800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.192430] ACPI: Dynamic OEM Table Load: [ 0.192433] ACPI: SSDT 0xFFFF8BB099268E00 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.193408] ACPI: Interpreter enabled [ 0.193432] ACPI: (supports S0 S3 S4 S5) [ 0.193433] ACPI: Using IOAPIC for interrupt routing [ 0.193456] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.193756] ACPI: Enabled 7 GPEs in block 00 to 3F [ 0.203049] ACPI: Power Resource [FN00] (off) [ 0.203114] ACPI: Power Resource [FN01] (off) [ 0.203238] ACPI: Power Resource [FN02] (off) [ 0.203311] ACPI: Power Resource [FN03] (off) [ 0.203375] ACPI: Power Resource [FN04] (off) [ 0.204071] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.204075] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.204595] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 0.204596] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.204957] PCI host bridge to bus 0000:00 [ 0.204959] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.204960] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.204961] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.204962] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.204963] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.204964] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.204964] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.204965] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window] [ 0.204967] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.204974] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000 [ 0.205064] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000 [ 0.205073] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit] [ 0.205078] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.205081] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.205091] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.205156] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 0.205163] pci 0000:00:03.0: reg 0x10: [mem 0xf7d14000-0xf7d17fff 64bit] [ 0.205264] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.205283] pci 0000:00:14.0: reg 0x10: [mem 0xf7d00000-0xf7d0ffff 64bit] [ 0.205337] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.205408] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.205428] pci 0000:00:16.0: reg 0x10: [mem 0xf7d1f000-0xf7d1f00f 64bit] [ 0.205484] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.205561] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.205581] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d1c000-0xf7d1c3ff] [ 0.205656] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.205730] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 0.205747] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d10000-0xf7d13fff 64bit] [ 0.205803] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.205875] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.205955] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.206069] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400 [ 0.206149] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.206261] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.206281] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d1b000-0xf7d1b3ff] [ 0.206356] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.206435] pci 0000:00:1f.0: [8086:8c50] type 00 class 0x060100 [ 0.206595] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.206610] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7] [ 0.206617] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3] [ 0.206623] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097] [ 0.206630] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083] [ 0.206636] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.206643] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d1a000-0xf7d1a7ff] [ 0.206675] pci 0000:00:1f.2: PME# supported from D3hot [ 0.206745] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.206761] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d19000-0xf7d190ff 64bit] [ 0.206779] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.206913] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.207041] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.207139] pci 0000:02:00.0: reg 0x10: [io 0xe300-0xe3ff] [ 0.207254] pci 0000:02:00.0: reg 0x18: [mem 0xf7c0f000-0xf7c0ffff 64bit] [ 0.207323] pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref] [ 0.207562] pci 0000:02:00.0: supports D1 D2 [ 0.207563] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.207760] pci 0000:02:00.1: [10ec:816a] type 00 class 0x070002 [ 0.207856] pci 0000:02:00.1: reg 0x10: [io 0xe200-0xe2ff] [ 0.207967] pci 0000:02:00.1: reg 0x18: [mem 0xf7c0e000-0xf7c0efff 64bit] [ 0.208035] pci 0000:02:00.1: reg 0x20: [mem 0xf7c08000-0xf7c0bfff 64bit] [ 0.208329] pci 0000:02:00.1: supports D1 D2 [ 0.208330] pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.208482] pci 0000:02:00.2: [10ec:816b] type 00 class 0x070002 [ 0.208578] pci 0000:02:00.2: reg 0x10: [io 0xe100-0xe1ff] [ 0.208689] pci 0000:02:00.2: reg 0x18: [mem 0xf7c0d000-0xf7c0dfff 64bit] [ 0.208757] pci 0000:02:00.2: reg 0x20: [mem 0xf7c04000-0xf7c07fff 64bit] [ 0.209031] pci 0000:02:00.2: supports D1 D2 [ 0.209032] pci 0000:02:00.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.209220] pci 0000:02:00.3: [10ec:816c] type 00 class 0x0c0701 [ 0.209254] pci 0000:02:00.3: reg 0x10: [io 0xe000-0xe0ff] [ 0.209365] pci 0000:02:00.3: reg 0x18: [mem 0xf7c0c000-0xf7c0c0ff 64bit] [ 0.209433] pci 0000:02:00.3: reg 0x20: [mem 0xf7c00000-0xf7c03fff 64bit] [ 0.209739] pci 0000:02:00.3: supports D1 D2 [ 0.209740] pci 0000:02:00.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.209956] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.209960] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff] [ 0.209963] pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.209967] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.210917] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 12 14 15) [ 0.210966] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 12 14 15) [ 0.211018] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 12 14 15) [ 0.211070] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 12 14 15) [ 0.211117] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 12 14 15) *0, disabled. [ 0.211180] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 *11) [ 0.211230] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 10 12 14 15) [ 0.211276] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 10 12 14 15) [ 0.211656] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.211656] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.211656] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.211656] vgaarb: loaded [ 0.211656] pps_core: LinuxPPS API ver. 1 registered [ 0.211656] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.211656] PTP clock support registered [ 0.211656] EDAC MC: Ver: 3.0.0 [ 0.211656] Registered efivars operations [ 0.211656] PCI: Using ACPI for IRQ routing [ 0.212449] PCI: pci_cache_line_size set to 64 bytes [ 0.212549] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.212550] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.212551] e820: reserve RAM buffer [mem 0xc7134000-0xc7ffffff] [ 0.212552] e820: reserve RAM buffer [mem 0xc79d8000-0xc7ffffff] [ 0.212553] e820: reserve RAM buffer [mem 0xd88aa000-0xdbffffff] [ 0.212554] e820: reserve RAM buffer [mem 0x11ee00000-0x11fffffff] [ 0.212647] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.212647] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.216184] clocksource: Switched to clocksource tsc-early [ 0.226487] VFS: Disk quotas dquot_6.6.0 [ 0.226502] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.226639] AppArmor: AppArmor Filesystem Enabled [ 0.226655] pnp: PnP ACPI init [ 0.227027] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.227029] system 00:00: [io 0xffff] has been reserved [ 0.227034] system 00:00: [io 0xffff] has been reserved [ 0.227036] system 00:00: [io 0xffff] has been reserved [ 0.227037] system 00:00: [io 0x1c00-0x1cfe] has been reserved [ 0.227038] system 00:00: [io 0x1d00-0x1dfe] has been reserved [ 0.227040] system 00:00: [io 0x1e00-0x1efe] has been reserved [ 0.227041] system 00:00: [io 0x1f00-0x1ffe] has been reserved [ 0.227043] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.227044] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.227049] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.227072] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.227120] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.227123] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.227313] system 00:03: [io 0x0a00-0x0a0f] has been reserved [ 0.227315] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.227316] system 00:03: [io 0x0a20-0x0a2f] has been reserved [ 0.227318] system 00:03: [io 0x0a30-0x0a3f] has been reserved [ 0.227319] system 00:03: [io 0x0a50-0x0a5f] has been reserved [ 0.227323] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.227586] pnp 00:04: [dma 0 disabled] [ 0.227621] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.227876] pnp 00:05: [dma 0 disabled] [ 0.227905] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.228249] pnp 00:06: [dma 0 disabled] [ 0.228368] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.228416] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.228419] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.228455] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.228793] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.228794] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.228796] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.228797] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.228799] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.228800] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.228802] system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.228803] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.228805] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 0.228806] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.228808] system 00:09: [mem 0xf7fdf000-0xf7fdffff] has been reserved [ 0.228809] system 00:09: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.228813] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.229020] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c31 (active) [ 0.229080] pnp: PnP ACPI: found 11 devices [ 0.234812] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.234818] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.234820] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 0.234821] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000 [ 0.234830] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdf200000-0xdf3fffff] [ 0.234837] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdf400000-0xdf5fffff 64bit pref] [ 0.234839] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.234841] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.234849] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.234853] pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf3fffff] [ 0.234857] pci 0000:00:1c.0: bridge window [mem 0xdf400000-0xdf5fffff 64bit pref] [ 0.234862] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.234864] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff] [ 0.234868] pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.234871] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.234877] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.234878] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.234879] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.234880] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.234881] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.234882] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.234882] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window] [ 0.234883] pci_bus 0000:00: resource 11 [mem 0xdf200000-0xfeafffff window] [ 0.234885] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.234885] pci_bus 0000:01: resource 1 [mem 0xdf200000-0xdf3fffff] [ 0.234886] pci_bus 0000:01: resource 2 [mem 0xdf400000-0xdf5fffff 64bit pref] [ 0.234887] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.234888] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 0.234889] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.234986] NET: Registered protocol family 2 [ 0.235069] IP idents hash table entries: 65536 (order: 7, 524288 bytes) [ 0.235604] tcp_listen_portaddr_hash hash table entries: 2048 (order: 5, 131072 bytes) [ 0.235644] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.235762] TCP bind hash table entries: 32768 (order: 8, 1835008 bytes) [ 0.236073] TCP: Hash tables configured (established 32768 bind 32768) [ 0.236109] UDP hash table entries: 2048 (order: 6, 262144 bytes) [ 0.236171] UDP-Lite hash table entries: 2048 (order: 6, 262144 bytes) [ 0.236246] NET: Registered protocol family 1 [ 0.236250] NET: Registered protocol family 44 [ 0.236258] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.236845] PCI: CLS 64 bytes, default 64 [ 0.236888] Unpacking initramfs... [ 0.957135] Freeing initrd memory: 60880K [ 0.957181] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.957182] software IO TLB: mapped [mem 0xd48aa000-0xd88aa000] (64MB) [ 0.957789] Initialise system trusted keyrings [ 0.957796] Key type blacklist registered [ 0.957842] workingset: timestamp_bits=40 max_order=20 bucket_order=0 [ 0.959146] zbud: loaded [ 1.089639] Key type asymmetric registered [ 1.089641] Asymmetric key parser 'x509' registered [ 1.089648] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.089668] io scheduler noop registered [ 1.089668] io scheduler deadline registered [ 1.089692] io scheduler cfq registered (default) [ 1.089693] io scheduler mq-deadline registered [ 1.090378] pcieport 0000:00:1c.0: Signaling PME with IRQ 26 [ 1.090409] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ [ 1.090689] pcieport 0000:00:1c.2: Signaling PME with IRQ 27 [ 1.090748] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.090762] efifb: probing for efifb [ 1.090781] efifb: framebuffer at 0xe0000000, using 8128k, total 8128k [ 1.090782] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 1.090782] efifb: scrolling: redraw [ 1.090783] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.093941] Console: switching to colour frame buffer device 240x67 [ 1.097027] fb0: EFI VGA frame buffer device [ 1.097035] intel_idle: MWAIT substates: 0x42120 [ 1.097036] intel_idle: v0.4.1 model 0x3C [ 1.097189] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.097421] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.118452] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.139543] 00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.160507] 0000:02:00.1: ttyS2 at I/O 0xe200 (irq = 19, base_baud = 115200) is a 16550A [ 1.181176] 0000:02:00.2: ttyS3 at I/O 0xe100 (irq = 16, base_baud = 115200) is a 16550A [ 1.181412] Linux agpgart interface v0.103 [ 1.181469] AMD IOMMUv2 driver by Joerg Roedel [ 1.181469] AMD IOMMUv2 functionality not available on this system [ 1.181773] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.181774] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.182009] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.182102] mousedev: PS/2 mouse device common for all mice [ 1.182146] rtc_cmos 00:01: RTC can wake from S4 [ 1.182375] rtc_cmos 00:01: registered as rtc0 [ 1.182388] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.182397] intel_pstate: Intel P-state driver initializing [ 1.184234] NET: Registered protocol family 10 [ 1.199613] Segment Routing with IPv6 [ 1.199634] mip6: Mobile IPv6 [ 1.199637] NET: Registered protocol family 17 [ 1.199733] mpls_gso: MPLS GSO support [ 1.200105] mce: Using 9 MCE banks [ 1.200165] microcode: sig=0x306c3, pf=0x2, revision=0x28 [ 1.200249] microcode: Microcode Update Driver: v2.2. [ 1.200261] sched_clock: Marking stable (1199994075, 250299)->(1203008702, -2764328) [ 1.200503] registered taskstats version 1 [ 1.200512] Loading compiled-in X.509 certificates [ 1.201722] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.232353] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 1.232363] Loaded X.509 cert 'Debian Secure Boot Signer 2021 - linux: 4b6ef5abca669825178e052c84667ccbc0531f8c' [ 1.232377] zswap: loaded using pool lzo/zbud [ 1.232564] AppArmor: AppArmor sha1 policy hashing enabled [ 1.232951] rtc_cmos 00:01: setting system clock to 2023-04-15 10:34:04 UTC (1681554844) [ 1.234075] Freeing unused kernel image memory: 1576K [ 1.234107] Write protecting the kernel read-only data: 16384k [ 1.234731] Freeing unused kernel image memory: 2032K [ 1.234957] Freeing unused kernel image memory: 760K [ 1.240764] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.240765] x86/mm: Checking user space page tables [ 1.246274] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.246275] Run /init as init process [ 1.306350] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 1.323176] ACPI: Power Button [PWRB] [ 1.351412] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.352930] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 1.354268] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.354666] SCSI subsystem initialized [ 1.359419] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.359420] ACPI: Thermal Zone [TZ00] (28 C) [ 1.362917] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20180810/utaddress-213) [ 1.362921] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.362928] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20180810/utaddress-213) [ 1.362930] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.362931] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20180810/utaddress-213) [ 1.362933] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20180810/utaddress-213) [ 1.362934] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.362935] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20180810/utaddress-213) [ 1.362936] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20180810/utaddress-213) [ 1.362938] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.362939] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 1.363357] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.363358] ACPI: Thermal Zone [TZ01] (30 C) [ 1.364882] ACPI: bus type USB registered [ 1.366676] usbcore: registered new interface driver usbfs [ 1.367481] usbcore: registered new interface driver hub [ 1.367659] usbcore: registered new device driver usb [ 1.371179] ACPI: Power Button [PWRF] [ 1.396169] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.397680] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.397801] libata version 3.00 loaded. [ 1.400283] ehci-pci: EHCI PCI platform driver [ 1.400533] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.400594] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.400609] ehci-pci 0000:00:1a.0: debug port 2 [ 1.402037] ahci 0000:00:1f.2: version 3.0 [ 1.402201] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode [ 1.402203] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 1.404640] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.404688] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d1c000 [ 1.405425] r8169 0000:02:00.0 eth0: RTL8168dp/8111dp, b8:ae:ed:b7:47:18, XID 28b00000, IRQ 28 [ 1.405426] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.411940] scsi host0: ahci [ 1.412250] scsi host1: ahci [ 1.412391] scsi host2: ahci [ 1.412488] scsi host3: ahci [ 1.412565] scsi host4: ahci [ 1.412640] scsi host5: ahci [ 1.412695] ata1: SATA max UDMA/133 abar m2048@0xf7d1a000 port 0xf7d1a100 irq 29 [ 1.412696] ata2: DUMMY [ 1.412698] ata3: SATA max UDMA/133 abar m2048@0xf7d1a000 port 0xf7d1a200 irq 29 [ 1.412699] ata4: DUMMY [ 1.412700] ata5: DUMMY [ 1.412700] ata6: DUMMY [ 1.419252] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.419560] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.419562] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.419563] usb usb1: Product: EHCI Host Controller [ 1.419564] usb usb1: Manufacturer: Linux 4.19.0-21-rt-amd64 ehci_hcd [ 1.419564] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.419777] hub 1-0:1.0: USB hub found [ 1.419790] hub 1-0:1.0: 2 ports detected [ 1.420021] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.420028] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.421093] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 1.421098] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.421406] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.421408] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.421409] usb usb2: Product: xHCI Host Controller [ 1.421409] usb usb2: Manufacturer: Linux 4.19.0-21-rt-amd64 xhci-hcd [ 1.421410] usb usb2: SerialNumber: 0000:00:14.0 [ 1.421511] hub 2-0:1.0: USB hub found [ 1.421534] hub 2-0:1.0: 12 ports detected [ 1.423355] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.423358] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 1.423369] ehci-pci 0000:00:1d.0: debug port 2 [ 1.423377] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.423380] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.423389] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.423437] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 1.423438] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.423439] usb usb4: Product: xHCI Host Controller [ 1.423439] usb usb4: Manufacturer: Linux 4.19.0-21-rt-amd64 xhci-hcd [ 1.423440] usb usb4: SerialNumber: 0000:00:14.0 [ 1.423534] hub 4-0:1.0: USB hub found [ 1.423639] hub 4-0:1.0: 6 ports detected [ 1.427286] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.427404] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d1b000 [ 1.443250] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.443303] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.443304] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.443305] usb usb3: Product: EHCI Host Controller [ 1.443305] usb usb3: Manufacturer: Linux 4.19.0-21-rt-amd64 ehci_hcd [ 1.443306] usb usb3: SerialNumber: 0000:00:1d.0 [ 1.443480] hub 3-0:1.0: USB hub found [ 1.443486] hub 3-0:1.0: 2 ports detected [ 1.450901] checking generic (e0000000 7f0000) vs hw (e0000000 10000000) [ 1.450902] fb: switching to inteldrmfb from EFI VGA [ 1.450921] Console: switching to colour dummy device 80x25 [ 1.451028] [drm] Replacing VGA console driver [ 1.451796] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.451797] [drm] Driver supports precise vblank timestamp query. [ 1.452139] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.675159] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.687160] usb 2-8: new full-speed USB device number 2 using xhci_hcd [ 1.703158] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 1.725444] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.725460] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.726669] ata3.00: ATAPI: HL-DT-ST DVDRAM GHD0N, 1.00, max UDMA/133 [ 1.728068] ata3.00: configured for UDMA/133 [ 1.735291] ata1.00: ATA-8: SAMSUNG HM500JI, 2AC101C4, max UDMA/133 [ 1.735292] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.745140] ata1.00: configured for UDMA/133 [ 1.745236] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM500JI 01C4 PQ: 0 ANSI: 5 [ 1.746229] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GHD0N 1.00 PQ: 0 ANSI: 5 [ 1.787346] r8169 0000:02:00.0 enp2s0f0: renamed from eth0 [ 1.792288] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.792292] sd 0:0:0:0: [sda] Write Protect is off [ 1.792293] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.792300] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.796970] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0 [ 1.821254] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.821662] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 [ 1.834223] sr 2:0:0:0: [sr0] scsi3-mmc drive: 40x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.834239] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.834794] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 1.835532] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.835536] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.835839] hub 1-1:1.0: USB hub found [ 1.835902] hub 1-1:1.0: 6 ports detected [ 1.837308] usb 2-8: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01 [ 1.837324] usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.837326] usb 2-8: Product: USB Receiver [ 1.837328] usb 2-8: Manufacturer: Logitech [ 1.848530] hidraw: raw HID events driver (C) Jiri Kosina [ 1.850725] fbcon: inteldrmfb (fb0) is primary device [ 1.860710] sda: sda1 sda2 sda3 [ 1.861305] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.863565] usb 3-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.863567] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.863803] hub 3-1:1.0: USB hub found [ 1.863888] hub 3-1:1.0: 6 ports detected [ 1.923434] Console: switching to colour frame buffer device 240x67 [ 1.950469] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.967256] tsc: Refined TSC clocksource calibration: 2893.303 MHz [ 1.967265] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b48c6eeb1, max_idle_ns: 440795229827 ns [ 1.967286] clocksource: Switched to clocksource tsc [ 1.978227] usbcore: registered new interface driver usbhid [ 1.978228] usbhid: USB HID core driver [ 1.979960] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/0003:046D:C534.0001/input/input4 [ 2.039768] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-8/input0 [ 2.040423] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.1/0003:046D:C534.0002/input/input5 [ 2.040682] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.1/0003:046D:C534.0002/input/input6 [ 2.099478] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.1/0003:046D:C534.0002/input/input7 [ 2.099869] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-8/input1 [ 2.995816] PM: Image not found (code -22) [ 3.194280] cryptd: max_cpu_qlen set to 1000 [ 3.337309] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 5.360574] systemd[1]: Inserted module 'autofs4' [ 5.714652] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 5.731473] systemd[1]: Detected architecture x86-64. [ 5.754426] systemd[1]: Set hostname to . [ 6.934612] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 6.934845] systemd[1]: Listening on Journal Audit Socket. [ 6.935120] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 6.935333] systemd[1]: Listening on Journal Socket. [ 6.974713] systemd[1]: Starting Set the console keyboard layout... [ 7.018037] systemd[1]: Starting Load Kernel Modules... [ 7.018941] systemd[1]: Mounting Kernel Debug File System... [ 7.558399] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 7.754269] systemd-journald[269]: Received request to flush runtime journal from PID 1 [ 8.710557] input: PC Speaker as /devices/platform/pcspkr/input/input10 [ 9.003656] parport_pc 00:06: reported by Plug and Play ACPI [ 9.003772] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 9.176010] ppdev: user-space parallel port driver [ 9.220221] tpm_tis 00:0a: 1.2 TPM (device-id 0xFE, rev-id 2) [ 9.242633] iTCO_vendor_support: vendor-support=0 [ 9.251826] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 9.251879] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860) [ 9.252028] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 9.256605] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.256663] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 9.310281] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 9.310282] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 9.310283] RAPL PMU: hw unit of domain package 2^-14 Joules [ 9.310284] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 9.310284] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 9.667889] version 39.2 [ 9.682711] ipmi device interface [ 10.101836] IPMI System Interface driver. [ 10.101906] ipmi_si: Unable to find any System Interface(s) [ 10.668190] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 10.668337] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 10.668439] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 10.728904] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11 [ 10.728981] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12 [ 10.729025] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13 [ 10.729068] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14 [ 10.729107] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15 [ 10.764505] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC662 rev3: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 10.764508] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 10.764509] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 10.764510] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 10.764511] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 10.764512] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 10.764513] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 10.764514] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ 10.781966] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16 [ 10.782022] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17 [ 10.782068] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18 [ 10.782113] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19 [ 10.782156] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20 [ 10.973031] intel_rapl: Found RAPL domain package [ 10.973035] intel_rapl: Found RAPL domain core [ 10.973037] intel_rapl: Found RAPL domain uncore [ 10.973039] intel_rapl: Found RAPL domain dram [ 10.973043] intel_rapl: RAPL package 0 domain package locked by BIOS [ 10.973052] intel_rapl: RAPL package 0 domain dram locked by BIOS [ 12.464489] Adding 999420k swap on /dev/sda3. Priority:-2 extents:1 across:999420k FS [ 15.524869] audit: type=1400 audit(1681554858.786:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=421 comm="apparmor_parser" [ 15.524873] audit: type=1400 audit(1681554858.786:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=421 comm="apparmor_parser" [ 15.524913] audit: type=1400 audit(1681554858.786:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=422 comm="apparmor_parser" [ 15.589531] audit: type=1400 audit(1681554858.850:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=423 comm="apparmor_parser" [ 15.589538] audit: type=1400 audit(1681554858.850:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=423 comm="apparmor_parser" [ 15.589542] audit: type=1400 audit(1681554858.850:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=423 comm="apparmor_parser" [ 15.608520] audit: type=1400 audit(1681554858.870:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=424 comm="apparmor_parser" [ 15.634510] audit: type=1400 audit(1681554858.894:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=425 comm="apparmor_parser" [ 15.679821] audit: type=1400 audit(1681554858.942:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=420 comm="apparmor_parser" [ 15.679824] audit: type=1400 audit(1681554858.942:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=420 comm="apparmor_parser" [ 18.409124] ec_master: loading out-of-tree module taints kernel. [ 18.409600] ec_master: module verification failed: signature and/or required key missing - tainting kernel [ 18.423805] EtherCAT: Master driver 1.5.2 unknown [ 18.423891] EtherCAT: 1 master waiting for devices. [ 18.456158] ec_generic: EtherCAT master generic Ethernet device module 1.5.2 unknown [ 18.456173] EtherCAT: Accepting B8:AE:ED:B7:47:18 as main device for master 0. [ 18.456185] ec_generic: Binding socket to interface 2 (enp2s0f0). [ 18.499238] EtherCAT 0: Starting EtherCAT-IDLE thread. [ 18.499406] EtherCAT 0: Link state of ecm0 changed to UP. [ 18.511309] EtherCAT WARNING 0: 1 datagram TIMED OUT! [ 19.511206] EtherCAT WARNING 0: 124 datagrams TIMED OUT! [ 20.511312] EtherCAT WARNING 0: 124 datagrams TIMED OUT! [ 21.515325] EtherCAT WARNING 0: 123 datagrams TIMED OUT! [ 22.515330] EtherCAT WARNING 0: 121 datagrams TIMED OUT! [ 23.515201] EtherCAT WARNING 0: 125 datagrams TIMED OUT! [ 24.523246] EtherCAT WARNING 0: 117 datagrams TIMED OUT! [ 25.132276] IPv6: ADDRCONF(NETDEV_UP): enp2s0f0: link is not ready [ 25.133215] RTL8211B Gigabit Ethernet r8169-200:00: attached PHY driver [RTL8211B Gigabit Ethernet] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE) [ 25.139207] EtherCAT 0: Link state of ecm0 changed to DOWN. [ 25.232527] IPv6: ADDRCONF(NETDEV_UP): enp2s0f0: link is not ready [ 25.233386] r8169 0000:02:00.0 enp2s0f0: Link is Down [ 26.304994] broken atomic modeset userspace detected, disabling atomic [ 26.823190] r8169 0000:02:00.0 enp2s0f0: Link is Up - 100Mbps/Full - flow control off [ 26.823202] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0f0: link becomes ready [ 26.823224] EtherCAT 0: Link state of ecm0 changed to UP. [ 26.831198] EtherCAT 0: 1 slave(s) responding on main device. [ 26.831202] EtherCAT 0: Slave states on main device: INIT. [ 26.831328] EtherCAT 0: Scanning bus. [ 26.863969] EtherCAT 0: Bus scanning completed in 32 ms. [ 26.863971] EtherCAT 0: Using slave 0 as DC reference clock. [ 26.871213] EtherCAT 0: Slave states on main device: PREOP. [ 30.106146] EtherCAT ERROR 0-0: SDO information error response while fetching SDO 0x0678! [ 30.106150] EtherCAT ERROR 0-0: SDO abort message 0x06010000: "Unsupported access to an object". tomasz@debian:~$ ethercat upload -p 0 -t int32 0x6064 0 0x0016336e 1454958 tomasz@debian:~$ ethercat master Master0 Phase: Idle Active: no Slaves: 1 Ethernet devices: Main: b8:ae:ed:b7:47:18 (attached) Link: UP Tx frames: 25700 Tx bytes: 2041896 Rx frames: 25699 Rx bytes: 2041836 Tx errors: 0 Tx frame rate [1/s]: 125 125 122 Tx rate [KByte/s]: 7.3 7.4 7.8 Rx frame rate [1/s]: 125 125 122 Rx rate [KByte/s]: 7.3 7.4 7.8 Common: Tx frames: 25700 Tx bytes: 2041896 Rx frames: 25699 Rx bytes: 2041836 Lost frames: 0 Tx frame rate [1/s]: 125 125 122 Tx rate [KByte/s]: 7.3 7.4 7.8 Rx frame rate [1/s]: 125 125 122 Rx rate [KByte/s]: 7.3 7.4 7.8 Loss rate [1/s]: 0 0 0 Frame loss [%]: 0.0 0.0 0.0 Distributed clocks: Reference clock: Slave 0 DC reference time: 0 Application time: 0 2000-01-01 00:00:00.000000000 tomasz@debian:~$ ethercat slaves 0 0:0 PREOP + SG-AS EtherCAT(COE) Servo Drives Rev1.0 tomasz@debian:~$ ethercat slaves -v === Master 0, Slave 0 === Device: Main State: PREOP Flag: + Identity: Vendor Id: 0x00000bf8 Product code: 0x00000001 Revision number: 0x00010008 Serial number: 0x00000000 DL information: FMMU bit operation: no Distributed clocks: yes, 32 bit DC system time transmission delay: 0 ns Port Type Link Loop Signal NextSlave RxTime [ns] Diff [ns] NextDc [ns] 0 MII up open yes - 3144418126 0 0 1 MII down closed no - - - - 2 N/A down closed no - - - - 3 N/A down closed no - - - - Mailboxes: Bootstrap RX: 0x0000/0, TX: 0x0000/0 Standard RX: 0x1800/384, TX: 0x1a00/384 Supported protocols: CoE General: Group: Drive Image name: DRIVE Order number: SG-ASE Device name: SG-AS EtherCAT(COE) Servo Drives Rev1.0 CoE details: Enable SDO: yes Enable SDO Info: yes Enable PDO Assign: yes Enable PDO Configuration: yes Enable Upload at startup: no Enable SDO complete access: no Flags: Enable SafeOp: yes Enable notLRW: no Current consumption: 0 mA tomasz@debian:~$ # now cnclinux start ... tomasz@debian:~$ ethercat slaves 0 0:0 OP + SG-AS EtherCAT(COE) Servo Drives Rev1.0 tomasz@debian:~$ ethercat slaves -v === Master 0, Slave 0 === Device: Main State: OP Flag: + Identity: Vendor Id: 0x00000bf8 Product code: 0x00000001 Revision number: 0x00010008 Serial number: 0x00000000 DL information: FMMU bit operation: no Distributed clocks: yes, 32 bit DC system time transmission delay: 0 ns Port Type Link Loop Signal NextSlave RxTime [ns] Diff [ns] NextDc [ns] 0 MII up open yes - 3144418126 0 0 1 MII down closed no - - - - 2 N/A down closed no - - - - 3 N/A down closed no - - - - Mailboxes: Bootstrap RX: 0x0000/0, TX: 0x0000/0 Standard RX: 0x1800/384, TX: 0x1a00/384 Supported protocols: CoE General: Group: Drive Image name: DRIVE Order number: SG-ASE Device name: SG-AS EtherCAT(COE) Servo Drives Rev1.0 CoE details: Enable SDO: yes Enable SDO Info: yes Enable PDO Assign: yes Enable PDO Configuration: yes Enable Upload at startup: no Enable SDO complete access: no Flags: Enable SafeOp: yes Enable notLRW: no Current consumption: 0 mA tomasz@debian:~$ # error 40 (bus error) appears now on drive tomasz@debian:~$ sudo dmesg [ 0.000000] microcode: microcode updated early to revision 0x28, date = 2019-11-12 [ 0.000000] Linux version 4.19.0-21-rt-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP PREEMPT RT Debian 4.19.249-2 (2022-06-30) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-21-rt-amd64 root=UUID=88cad720-5c74-4890-b4cb-9ab4568cc4d9 ro quiet [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7133fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c7134000-0x00000000c713afff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000c713b000-0x00000000c79d7fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c79d8000-0x00000000c7c6cfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c7c6d000-0x00000000d88a9fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d88aa000-0x00000000d8917fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d8918000-0x00000000d8930fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000d8931000-0x00000000d936efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000d936f000-0x00000000d9f6dfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d9f6e000-0x00000000d9ffffff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011edfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by Acer Inc. [ 0.000000] efi: ESRT=0xd9f6c918 ACPI=0xd891d000 ACPI 2.0=0xd891d000 SMBIOS=0xf04c0 MPS=0xfd4b0 [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Acer Veriton X4630G/Veriton X4630G, BIOS P22-A3 04/15/2015 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2893.180 MHz processor [ 0.003270] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.003272] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.003278] last_pfn = 0x11ee00 max_arch_pfn = 0x400000000 [ 0.003281] MTRR default type: uncachable [ 0.003282] MTRR fixed ranges enabled: [ 0.003283] 00000-9FFFF write-back [ 0.003283] A0000-BFFFF uncachable [ 0.003284] C0000-CFFFF write-protect [ 0.003284] D0000-DFFFF uncachable [ 0.003285] E0000-FFFFF write-protect [ 0.003285] MTRR variable ranges enabled: [ 0.003286] 0 base 0000000000 mask 7F00000000 write-back [ 0.003287] 1 base 0100000000 mask 7FE0000000 write-back [ 0.003287] 2 base 00E0000000 mask 7FE0000000 uncachable [ 0.003288] 3 base 00DC000000 mask 7FFC000000 uncachable [ 0.003288] 4 base 00DB000000 mask 7FFF000000 uncachable [ 0.003289] 5 base 011F000000 mask 7FFF000000 uncachable [ 0.003289] 6 base 011EE00000 mask 7FFFE00000 uncachable [ 0.003290] 7 disabled [ 0.003290] 8 disabled [ 0.003290] 9 disabled [ 0.004047] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.004142] e820: update [mem 0xdb000000-0xffffffff] usable ==> reserved [ 0.004146] last_pfn = 0xd88aa max_arch_pfn = 0x400000000 [ 0.010979] found SMP MP-table at [mem 0x000fd750-0x000fd75f] [ 0.010992] Using GB pages for direct mapping [ 0.011479] RAMDISK: [mem 0x30907000-0x3447afff] [ 0.011482] ACPI: Early table checksum verification disabled [ 0.011484] ACPI: RSDP 0x00000000D891D000 000024 (v02 ACRSYS) [ 0.011487] ACPI: XSDT 0x00000000D891D090 0000A4 (v01 ACRSYS ACRPRDCT 01072009 AMI 00010013) [ 0.011492] ACPI: FACP 0x00000000D892BA38 00010C (v05 ACRSYS ACRPRDCT 01072009 AMI 00010013) [ 0.011496] ACPI: DSDT 0x00000000D891D1C8 00E86C (v02 ACRSYS ACRPRDCT 00000028 INTL 20120711) [ 0.011498] ACPI: FACS 0x00000000D936D080 000040 [ 0.011499] ACPI: APIC 0x00000000D892BB48 000072 (v03 ACRSYS ACRPRDCT 01072009 AMI 00010013) [ 0.011501] ACPI: FPDT 0x00000000D892BBC0 000044 (v01 ACRSYS ACRPRDCT 01072009 AMI 00010013) [ 0.011503] ACPI: TCPA 0x00000000D892BC08 000032 (v02 APTIO4 NAPAASF 00000001 MSFT 01000013) [ 0.011505] ACPI: MSDM 0x00000000D892BC40 000055 (v03 ACRSYS ACRPRDCT 01072009 AMI 00010013) [ 0.011507] ACPI: DBGP 0x00000000D892BC98 000034 (v01 ACRSYS ACRPRDCT 00000000 MSFT 00000005) [ 0.011509] ACPI: SLIC 0x00000000D892BCD0 000176 (v01 ACRSYS ACRPRDCT 01072000 AMI 00010013) [ 0.011511] ACPI: SSDT 0x00000000D892BE48 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711) [ 0.011513] ACPI: SSDT 0x00000000D892C388 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711) [ 0.011515] ACPI: MCFG 0x00000000D892CE60 00003C (v01 ACRSYS ACRPRDCT 01072009 MSFT 00000097) [ 0.011517] ACPI: HPET 0x00000000D892CEA0 000038 (v01 ACRSYS ACRPRDCT 01072009 AMI. 00000005) [ 0.011519] ACPI: SSDT 0x00000000D892CED8 00036D (v01 SataRe SataTabl 00001000 INTL 20120711) [ 0.011521] ACPI: SSDT 0x00000000D892D248 003528 (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [ 0.011523] ACPI: ASF! 0x00000000D8930770 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.011525] ACPI: DMAR 0x00000000D8930818 0000B8 (v01 INTEL HSW 00000001 INTL 00000001) [ 0.011527] ACPI: BGRT 0x00000000D89308D0 000038 (v00 ACRSYS ACRPRDCT 01072009 AMI 00010013) [ 0.011529] ACPI: Reserving FACP table memory at [mem 0xd892ba38-0xd892bb43] [ 0.011529] ACPI: Reserving DSDT table memory at [mem 0xd891d1c8-0xd892ba33] [ 0.011530] ACPI: Reserving FACS table memory at [mem 0xd936d080-0xd936d0bf] [ 0.011530] ACPI: Reserving APIC table memory at [mem 0xd892bb48-0xd892bbb9] [ 0.011531] ACPI: Reserving FPDT table memory at [mem 0xd892bbc0-0xd892bc03] [ 0.011531] ACPI: Reserving TCPA table memory at [mem 0xd892bc08-0xd892bc39] [ 0.011532] ACPI: Reserving MSDM table memory at [mem 0xd892bc40-0xd892bc94] [ 0.011532] ACPI: Reserving DBGP table memory at [mem 0xd892bc98-0xd892bccb] [ 0.011533] ACPI: Reserving SLIC table memory at [mem 0xd892bcd0-0xd892be45] [ 0.011533] ACPI: Reserving SSDT table memory at [mem 0xd892be48-0xd892c380] [ 0.011534] ACPI: Reserving SSDT table memory at [mem 0xd892c388-0xd892ce5f] [ 0.011534] ACPI: Reserving MCFG table memory at [mem 0xd892ce60-0xd892ce9b] [ 0.011535] ACPI: Reserving HPET table memory at [mem 0xd892cea0-0xd892ced7] [ 0.011535] ACPI: Reserving SSDT table memory at [mem 0xd892ced8-0xd892d244] [ 0.011536] ACPI: Reserving SSDT table memory at [mem 0xd892d248-0xd893076f] [ 0.011536] ACPI: Reserving ASF! table memory at [mem 0xd8930770-0xd8930814] [ 0.011537] ACPI: Reserving DMAR table memory at [mem 0xd8930818-0xd89308cf] [ 0.011537] ACPI: Reserving BGRT table memory at [mem 0xd89308d0-0xd8930907] [ 0.011549] ACPI: Local APIC address 0xfee00000 [ 0.011625] No NUMA configuration found [ 0.011626] Faking a node at [mem 0x0000000000000000-0x000000011edfffff] [ 0.011629] NODE_DATA(0) allocated [mem 0x11edfb000-0x11edfffff] [ 0.011650] Zone ranges: [ 0.011650] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.011651] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.011652] Normal [mem 0x0000000100000000-0x000000011edfffff] [ 0.011652] Device empty [ 0.011653] Movable zone start for each node [ 0.011653] Early memory node ranges [ 0.011654] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.011654] node 0: [mem 0x0000000000059000-0x000000000009efff] [ 0.011655] node 0: [mem 0x0000000000100000-0x00000000c7133fff] [ 0.011655] node 0: [mem 0x00000000c713b000-0x00000000c79d7fff] [ 0.011656] node 0: [mem 0x00000000c7c6d000-0x00000000d88a9fff] [ 0.011656] node 0: [mem 0x0000000100000000-0x000000011edfffff] [ 0.012127] Zeroed struct page in unavailable ranges: 35925 pages [ 0.012128] Initmem setup node 0 [mem 0x0000000000001000-0x000000011edfffff] [ 0.012129] On node 0 totalpages: 1012651 [ 0.012130] DMA zone: 64 pages used for memmap [ 0.012130] DMA zone: 28 pages reserved [ 0.012131] DMA zone: 3997 pages, LIFO batch:0 [ 0.012205] DMA32 zone: 13785 pages used for memmap [ 0.012206] DMA32 zone: 882190 pages, LIFO batch:63 [ 0.029024] Normal zone: 1976 pages used for memmap [ 0.029025] Normal zone: 126464 pages, LIFO batch:31 [ 0.031285] Reserving Intel graphics memory at [mem 0xdb200000-0xdf1fffff] [ 0.031363] ACPI: PM-Timer IO Port: 0x1808 [ 0.031365] ACPI: Local APIC address 0xfee00000 [ 0.031370] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.031384] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.031386] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.031387] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.031388] ACPI: IRQ0 used by override. [ 0.031388] ACPI: IRQ9 used by override. [ 0.031390] Using ACPI (MADT) for SMP configuration information [ 0.031391] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.031394] TSC deadline timer available [ 0.031395] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.031417] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.031418] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.031419] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.031419] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.031421] PM: Registered nosave memory: [mem 0xc7134000-0xc713afff] [ 0.031422] PM: Registered nosave memory: [mem 0xc79d8000-0xc7c6cfff] [ 0.031423] PM: Registered nosave memory: [mem 0xd88aa000-0xd8917fff] [ 0.031423] PM: Registered nosave memory: [mem 0xd8918000-0xd8930fff] [ 0.031423] PM: Registered nosave memory: [mem 0xd8931000-0xd936efff] [ 0.031424] PM: Registered nosave memory: [mem 0xd936f000-0xd9f6dfff] [ 0.031424] PM: Registered nosave memory: [mem 0xd9f6e000-0xd9ffffff] [ 0.031424] PM: Registered nosave memory: [mem 0xda000000-0xdaffffff] [ 0.031425] PM: Registered nosave memory: [mem 0xdb000000-0xdf1fffff] [ 0.031425] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff] [ 0.031425] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.031426] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.031426] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.031426] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.031427] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.031427] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.031427] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.031428] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.031428] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.031428] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.031428] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.031432] [mem 0xdf200000-0xf7ffffff] available for PCI devices [ 0.031433] Booting paravirtualized kernel on bare hardware [ 0.031435] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.117066] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.117228] percpu: Embedded 51 pages/cpu s169728 r8192 d30976 u524288 [ 0.117233] pcpu-alloc: s169728 r8192 d30976 u524288 alloc=1*2097152 [ 0.117234] pcpu-alloc: [0] 0 1 2 3 [ 0.117252] Built 1 zonelists, mobility grouping on. Total pages: 996798 [ 0.117252] Policy zone: Normal [ 0.117253] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-21-rt-amd64 root=UUID=88cad720-5c74-4890-b4cb-9ab4568cc4d9 ro quiet [ 0.120887] Calgary: detecting Calgary via BIOS EBDA area [ 0.120888] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.131436] Memory: 3832532K/4050604K available (10248K kernel code, 1308K rwdata, 3336K rodata, 1576K init, 2192K bss, 218072K reserved, 0K cma-reserved) [ 0.131756] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.131774] Kernel/User page tables isolation: enabled [ 0.131810] ftrace: allocating 31943 entries in 125 pages [ 0.144108] rcu: Preemptible hierarchical RCU implementation. [ 0.144109] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. [ 0.144109] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.144110] No expedited grace period (rcu_normal_after_boot). [ 0.144110] Tasks RCU enabled. [ 0.144110] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.146707] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16 [ 0.146917] random: crng init done [ 0.146935] Console: colour dummy device 80x25 [ 0.146940] console [tty0] enabled [ 0.146952] ACPI: Core revision 20180810 [ 0.147133] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.147142] hpet clockevent registered [ 0.147146] APIC: Switch to symmetric I/O mode setup [ 0.147147] DMAR: Host address width 39 [ 0.147148] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.147152] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a [ 0.147152] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.147155] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da [ 0.147155] DMAR: RMRR base: 0x000000d9e90000 end: 0x000000d9e9ffff [ 0.147156] DMAR: RMRR base: 0x000000db000000 end: 0x000000df1fffff [ 0.147157] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1 [ 0.147158] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.147158] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.147593] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.147594] x2apic enabled [ 0.147600] Switched APIC routing to cluster x2apic. [ 0.148009] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.167152] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29b41882dea, max_idle_ns: 440795239059 ns [ 0.167163] Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.36 BogoMIPS (lpj=11572720) [ 0.167164] pid_max: default: 32768 minimum: 301 [ 0.167190] Security Framework initialized [ 0.167190] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.167204] AppArmor: AppArmor initialized [ 0.168523] Dentry cache hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.169763] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.169785] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.169797] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.169994] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.169994] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.170013] CPU0: Thermal monitoring enabled (TM1) [ 0.170024] process: using mwait in idle threads [ 0.170026] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.170027] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.170028] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.170029] Spectre V2 : Mitigation: Retpolines [ 0.170029] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.170030] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.170036] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.170037] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.170058] MDS: Mitigation: Clear CPU buffers [ 0.170059] SRBDS: Mitigation: Microcode [ 0.170216] Freeing SMP alternatives memory: 20K [ 0.171202] smpboot: CPU0: Intel(R) Core(TM) i5-4460S CPU @ 2.90GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.171305] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.171345] ... version: 3 [ 0.171346] ... bit width: 48 [ 0.171346] ... generic registers: 8 [ 0.171347] ... value mask: 0000ffffffffffff [ 0.171348] ... max period: 00007fffffffffff [ 0.171348] ... fixed-purpose events: 3 [ 0.171349] ... event mask: 00000007000000ff [ 0.171395] rcu: Hierarchical SRCU implementation. [ 0.171978] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.172017] smp: Bringing up secondary CPUs ... [ 0.172115] x86: Booting SMP configuration: [ 0.172115] .... node #0, CPUs: #1 #2 #3 [ 0.176877] smp: Brought up 1 node, 4 CPUs [ 0.176877] smpboot: Max logical packages: 1 [ 0.176877] smpboot: Total of 4 processors activated (23145.44 BogoMIPS) [ 0.179313] devtmpfs: initialized [ 0.179313] x86/mm: Memory block size: 128MB [ 0.179665] PM: Registering ACPI NVS region [mem 0xc7134000-0xc713afff] (28672 bytes) [ 0.179665] PM: Registering ACPI NVS region [mem 0xd8931000-0xd936efff] (10739712 bytes) [ 0.179665] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.179665] futex hash table entries: 1024 (order: 5, 131072 bytes) [ 0.179665] pinctrl core: initialized pinctrl subsystem [ 0.179665] NET: Registered protocol family 16 [ 0.179665] audit: initializing netlink subsys (disabled) [ 0.179665] audit: type=2000 audit(1681554843.032:1): state=initialized audit_enabled=0 res=1 [ 0.179665] cpuidle: using governor ladder [ 0.179665] cpuidle: using governor menu [ 0.179665] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.179665] ACPI: bus type PCI registered [ 0.179665] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.179665] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.179665] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.179665] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override. [ 0.179665] PCI: Using configuration type 1 for base access [ 0.179665] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 0.179888] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.179888] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.179888] ACPI: Added _OSI(Module Device) [ 0.179888] ACPI: Added _OSI(Processor Device) [ 0.179888] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.179888] ACPI: Added _OSI(Processor Aggregator Device) [ 0.179888] ACPI: Added _OSI(Linux-Dell-Video) [ 0.179888] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.188083] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.188703] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.191700] ACPI: Dynamic OEM Table Load: [ 0.191705] ACPI: SSDT 0xFFFF8BB099095C00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.192065] ACPI: Dynamic OEM Table Load: [ 0.192069] ACPI: SSDT 0xFFFF8BB099069800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.192430] ACPI: Dynamic OEM Table Load: [ 0.192433] ACPI: SSDT 0xFFFF8BB099268E00 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.193408] ACPI: Interpreter enabled [ 0.193432] ACPI: (supports S0 S3 S4 S5) [ 0.193433] ACPI: Using IOAPIC for interrupt routing [ 0.193456] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.193756] ACPI: Enabled 7 GPEs in block 00 to 3F [ 0.203049] ACPI: Power Resource [FN00] (off) [ 0.203114] ACPI: Power Resource [FN01] (off) [ 0.203238] ACPI: Power Resource [FN02] (off) [ 0.203311] ACPI: Power Resource [FN03] (off) [ 0.203375] ACPI: Power Resource [FN04] (off) [ 0.204071] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.204075] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.204595] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 0.204596] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.204957] PCI host bridge to bus 0000:00 [ 0.204959] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.204960] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.204961] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.204962] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.204963] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.204964] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.204964] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.204965] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window] [ 0.204967] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.204974] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000 [ 0.205064] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000 [ 0.205073] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit] [ 0.205078] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.205081] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.205091] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.205156] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 0.205163] pci 0000:00:03.0: reg 0x10: [mem 0xf7d14000-0xf7d17fff 64bit] [ 0.205264] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.205283] pci 0000:00:14.0: reg 0x10: [mem 0xf7d00000-0xf7d0ffff 64bit] [ 0.205337] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.205408] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.205428] pci 0000:00:16.0: reg 0x10: [mem 0xf7d1f000-0xf7d1f00f 64bit] [ 0.205484] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.205561] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.205581] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d1c000-0xf7d1c3ff] [ 0.205656] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.205730] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 0.205747] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d10000-0xf7d13fff 64bit] [ 0.205803] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.205875] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.205955] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.206069] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400 [ 0.206149] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.206261] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.206281] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d1b000-0xf7d1b3ff] [ 0.206356] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.206435] pci 0000:00:1f.0: [8086:8c50] type 00 class 0x060100 [ 0.206595] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.206610] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7] [ 0.206617] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3] [ 0.206623] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097] [ 0.206630] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083] [ 0.206636] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.206643] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d1a000-0xf7d1a7ff] [ 0.206675] pci 0000:00:1f.2: PME# supported from D3hot [ 0.206745] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.206761] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d19000-0xf7d190ff 64bit] [ 0.206779] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.206913] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.207041] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.207139] pci 0000:02:00.0: reg 0x10: [io 0xe300-0xe3ff] [ 0.207254] pci 0000:02:00.0: reg 0x18: [mem 0xf7c0f000-0xf7c0ffff 64bit] [ 0.207323] pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref] [ 0.207562] pci 0000:02:00.0: supports D1 D2 [ 0.207563] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.207760] pci 0000:02:00.1: [10ec:816a] type 00 class 0x070002 [ 0.207856] pci 0000:02:00.1: reg 0x10: [io 0xe200-0xe2ff] [ 0.207967] pci 0000:02:00.1: reg 0x18: [mem 0xf7c0e000-0xf7c0efff 64bit] [ 0.208035] pci 0000:02:00.1: reg 0x20: [mem 0xf7c08000-0xf7c0bfff 64bit] [ 0.208329] pci 0000:02:00.1: supports D1 D2 [ 0.208330] pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.208482] pci 0000:02:00.2: [10ec:816b] type 00 class 0x070002 [ 0.208578] pci 0000:02:00.2: reg 0x10: [io 0xe100-0xe1ff] [ 0.208689] pci 0000:02:00.2: reg 0x18: [mem 0xf7c0d000-0xf7c0dfff 64bit] [ 0.208757] pci 0000:02:00.2: reg 0x20: [mem 0xf7c04000-0xf7c07fff 64bit] [ 0.209031] pci 0000:02:00.2: supports D1 D2 [ 0.209032] pci 0000:02:00.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.209220] pci 0000:02:00.3: [10ec:816c] type 00 class 0x0c0701 [ 0.209254] pci 0000:02:00.3: reg 0x10: [io 0xe000-0xe0ff] [ 0.209365] pci 0000:02:00.3: reg 0x18: [mem 0xf7c0c000-0xf7c0c0ff 64bit] [ 0.209433] pci 0000:02:00.3: reg 0x20: [mem 0xf7c00000-0xf7c03fff 64bit] [ 0.209739] pci 0000:02:00.3: supports D1 D2 [ 0.209740] pci 0000:02:00.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.209956] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.209960] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff] [ 0.209963] pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.209967] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.210917] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 12 14 15) [ 0.210966] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 12 14 15) [ 0.211018] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 12 14 15) [ 0.211070] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 12 14 15) [ 0.211117] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 12 14 15) *0, disabled. [ 0.211180] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 *11) [ 0.211230] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 10 12 14 15) [ 0.211276] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 10 12 14 15) [ 0.211656] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.211656] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.211656] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.211656] vgaarb: loaded [ 0.211656] pps_core: LinuxPPS API ver. 1 registered [ 0.211656] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.211656] PTP clock support registered [ 0.211656] EDAC MC: Ver: 3.0.0 [ 0.211656] Registered efivars operations [ 0.211656] PCI: Using ACPI for IRQ routing [ 0.212449] PCI: pci_cache_line_size set to 64 bytes [ 0.212549] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.212550] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.212551] e820: reserve RAM buffer [mem 0xc7134000-0xc7ffffff] [ 0.212552] e820: reserve RAM buffer [mem 0xc79d8000-0xc7ffffff] [ 0.212553] e820: reserve RAM buffer [mem 0xd88aa000-0xdbffffff] [ 0.212554] e820: reserve RAM buffer [mem 0x11ee00000-0x11fffffff] [ 0.212647] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.212647] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.216184] clocksource: Switched to clocksource tsc-early [ 0.226487] VFS: Disk quotas dquot_6.6.0 [ 0.226502] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.226639] AppArmor: AppArmor Filesystem Enabled [ 0.226655] pnp: PnP ACPI init [ 0.227027] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.227029] system 00:00: [io 0xffff] has been reserved [ 0.227034] system 00:00: [io 0xffff] has been reserved [ 0.227036] system 00:00: [io 0xffff] has been reserved [ 0.227037] system 00:00: [io 0x1c00-0x1cfe] has been reserved [ 0.227038] system 00:00: [io 0x1d00-0x1dfe] has been reserved [ 0.227040] system 00:00: [io 0x1e00-0x1efe] has been reserved [ 0.227041] system 00:00: [io 0x1f00-0x1ffe] has been reserved [ 0.227043] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.227044] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.227049] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.227072] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.227120] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.227123] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.227313] system 00:03: [io 0x0a00-0x0a0f] has been reserved [ 0.227315] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.227316] system 00:03: [io 0x0a20-0x0a2f] has been reserved [ 0.227318] system 00:03: [io 0x0a30-0x0a3f] has been reserved [ 0.227319] system 00:03: [io 0x0a50-0x0a5f] has been reserved [ 0.227323] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.227586] pnp 00:04: [dma 0 disabled] [ 0.227621] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.227876] pnp 00:05: [dma 0 disabled] [ 0.227905] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.228249] pnp 00:06: [dma 0 disabled] [ 0.228368] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.228416] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.228419] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.228455] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.228793] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.228794] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.228796] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.228797] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.228799] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.228800] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.228802] system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.228803] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.228805] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 0.228806] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.228808] system 00:09: [mem 0xf7fdf000-0xf7fdffff] has been reserved [ 0.228809] system 00:09: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.228813] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.229020] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c31 (active) [ 0.229080] pnp: PnP ACPI: found 11 devices [ 0.234812] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.234818] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.234820] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 0.234821] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000 [ 0.234830] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdf200000-0xdf3fffff] [ 0.234837] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdf400000-0xdf5fffff 64bit pref] [ 0.234839] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.234841] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.234849] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.234853] pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf3fffff] [ 0.234857] pci 0000:00:1c.0: bridge window [mem 0xdf400000-0xdf5fffff 64bit pref] [ 0.234862] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.234864] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff] [ 0.234868] pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.234871] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.234877] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.234878] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.234879] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.234880] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.234881] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.234882] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.234882] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window] [ 0.234883] pci_bus 0000:00: resource 11 [mem 0xdf200000-0xfeafffff window] [ 0.234885] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.234885] pci_bus 0000:01: resource 1 [mem 0xdf200000-0xdf3fffff] [ 0.234886] pci_bus 0000:01: resource 2 [mem 0xdf400000-0xdf5fffff 64bit pref] [ 0.234887] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.234888] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 0.234889] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.234986] NET: Registered protocol family 2 [ 0.235069] IP idents hash table entries: 65536 (order: 7, 524288 bytes) [ 0.235604] tcp_listen_portaddr_hash hash table entries: 2048 (order: 5, 131072 bytes) [ 0.235644] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.235762] TCP bind hash table entries: 32768 (order: 8, 1835008 bytes) [ 0.236073] TCP: Hash tables configured (established 32768 bind 32768) [ 0.236109] UDP hash table entries: 2048 (order: 6, 262144 bytes) [ 0.236171] UDP-Lite hash table entries: 2048 (order: 6, 262144 bytes) [ 0.236246] NET: Registered protocol family 1 [ 0.236250] NET: Registered protocol family 44 [ 0.236258] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.236845] PCI: CLS 64 bytes, default 64 [ 0.236888] Unpacking initramfs... [ 0.957135] Freeing initrd memory: 60880K [ 0.957181] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.957182] software IO TLB: mapped [mem 0xd48aa000-0xd88aa000] (64MB) [ 0.957789] Initialise system trusted keyrings [ 0.957796] Key type blacklist registered [ 0.957842] workingset: timestamp_bits=40 max_order=20 bucket_order=0 [ 0.959146] zbud: loaded [ 1.089639] Key type asymmetric registered [ 1.089641] Asymmetric key parser 'x509' registered [ 1.089648] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.089668] io scheduler noop registered [ 1.089668] io scheduler deadline registered [ 1.089692] io scheduler cfq registered (default) [ 1.089693] io scheduler mq-deadline registered [ 1.090378] pcieport 0000:00:1c.0: Signaling PME with IRQ 26 [ 1.090409] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ [ 1.090689] pcieport 0000:00:1c.2: Signaling PME with IRQ 27 [ 1.090748] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.090762] efifb: probing for efifb [ 1.090781] efifb: framebuffer at 0xe0000000, using 8128k, total 8128k [ 1.090782] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 1.090782] efifb: scrolling: redraw [ 1.090783] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.093941] Console: switching to colour frame buffer device 240x67 [ 1.097027] fb0: EFI VGA frame buffer device [ 1.097035] intel_idle: MWAIT substates: 0x42120 [ 1.097036] intel_idle: v0.4.1 model 0x3C [ 1.097189] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.097421] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.118452] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.139543] 00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.160507] 0000:02:00.1: ttyS2 at I/O 0xe200 (irq = 19, base_baud = 115200) is a 16550A [ 1.181176] 0000:02:00.2: ttyS3 at I/O 0xe100 (irq = 16, base_baud = 115200) is a 16550A [ 1.181412] Linux agpgart interface v0.103 [ 1.181469] AMD IOMMUv2 driver by Joerg Roedel [ 1.181469] AMD IOMMUv2 functionality not available on this system [ 1.181773] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.181774] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.182009] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.182102] mousedev: PS/2 mouse device common for all mice [ 1.182146] rtc_cmos 00:01: RTC can wake from S4 [ 1.182375] rtc_cmos 00:01: registered as rtc0 [ 1.182388] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.182397] intel_pstate: Intel P-state driver initializing [ 1.184234] NET: Registered protocol family 10 [ 1.199613] Segment Routing with IPv6 [ 1.199634] mip6: Mobile IPv6 [ 1.199637] NET: Registered protocol family 17 [ 1.199733] mpls_gso: MPLS GSO support [ 1.200105] mce: Using 9 MCE banks [ 1.200165] microcode: sig=0x306c3, pf=0x2, revision=0x28 [ 1.200249] microcode: Microcode Update Driver: v2.2. [ 1.200261] sched_clock: Marking stable (1199994075, 250299)->(1203008702, -2764328) [ 1.200503] registered taskstats version 1 [ 1.200512] Loading compiled-in X.509 certificates [ 1.201722] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.232353] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 1.232363] Loaded X.509 cert 'Debian Secure Boot Signer 2021 - linux: 4b6ef5abca669825178e052c84667ccbc0531f8c' [ 1.232377] zswap: loaded using pool lzo/zbud [ 1.232564] AppArmor: AppArmor sha1 policy hashing enabled [ 1.232951] rtc_cmos 00:01: setting system clock to 2023-04-15 10:34:04 UTC (1681554844) [ 1.234075] Freeing unused kernel image memory: 1576K [ 1.234107] Write protecting the kernel read-only data: 16384k [ 1.234731] Freeing unused kernel image memory: 2032K [ 1.234957] Freeing unused kernel image memory: 760K [ 1.240764] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.240765] x86/mm: Checking user space page tables [ 1.246274] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.246275] Run /init as init process [ 1.306350] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 1.323176] ACPI: Power Button [PWRB] [ 1.351412] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.352930] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 1.354268] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.354666] SCSI subsystem initialized [ 1.359419] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.359420] ACPI: Thermal Zone [TZ00] (28 C) [ 1.362917] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20180810/utaddress-213) [ 1.362921] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.362928] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20180810/utaddress-213) [ 1.362930] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.362931] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20180810/utaddress-213) [ 1.362933] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20180810/utaddress-213) [ 1.362934] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.362935] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20180810/utaddress-213) [ 1.362936] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20180810/utaddress-213) [ 1.362938] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.362939] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 1.363357] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.363358] ACPI: Thermal Zone [TZ01] (30 C) [ 1.364882] ACPI: bus type USB registered [ 1.366676] usbcore: registered new interface driver usbfs [ 1.367481] usbcore: registered new interface driver hub [ 1.367659] usbcore: registered new device driver usb [ 1.371179] ACPI: Power Button [PWRF] [ 1.396169] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.397680] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.397801] libata version 3.00 loaded. [ 1.400283] ehci-pci: EHCI PCI platform driver [ 1.400533] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.400594] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.400609] ehci-pci 0000:00:1a.0: debug port 2 [ 1.402037] ahci 0000:00:1f.2: version 3.0 [ 1.402201] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode [ 1.402203] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 1.404640] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.404688] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d1c000 [ 1.405425] r8169 0000:02:00.0 eth0: RTL8168dp/8111dp, b8:ae:ed:b7:47:18, XID 28b00000, IRQ 28 [ 1.405426] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.411940] scsi host0: ahci [ 1.412250] scsi host1: ahci [ 1.412391] scsi host2: ahci [ 1.412488] scsi host3: ahci [ 1.412565] scsi host4: ahci [ 1.412640] scsi host5: ahci [ 1.412695] ata1: SATA max UDMA/133 abar m2048@0xf7d1a000 port 0xf7d1a100 irq 29 [ 1.412696] ata2: DUMMY [ 1.412698] ata3: SATA max UDMA/133 abar m2048@0xf7d1a000 port 0xf7d1a200 irq 29 [ 1.412699] ata4: DUMMY [ 1.412700] ata5: DUMMY [ 1.412700] ata6: DUMMY [ 1.419252] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.419560] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.419562] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.419563] usb usb1: Product: EHCI Host Controller [ 1.419564] usb usb1: Manufacturer: Linux 4.19.0-21-rt-amd64 ehci_hcd [ 1.419564] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.419777] hub 1-0:1.0: USB hub found [ 1.419790] hub 1-0:1.0: 2 ports detected [ 1.420021] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.420028] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.421093] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 1.421098] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.421406] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.421408] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.421409] usb usb2: Product: xHCI Host Controller [ 1.421409] usb usb2: Manufacturer: Linux 4.19.0-21-rt-amd64 xhci-hcd [ 1.421410] usb usb2: SerialNumber: 0000:00:14.0 [ 1.421511] hub 2-0:1.0: USB hub found [ 1.421534] hub 2-0:1.0: 12 ports detected [ 1.423355] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.423358] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 1.423369] ehci-pci 0000:00:1d.0: debug port 2 [ 1.423377] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.423380] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.423389] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.423437] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 1.423438] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.423439] usb usb4: Product: xHCI Host Controller [ 1.423439] usb usb4: Manufacturer: Linux 4.19.0-21-rt-amd64 xhci-hcd [ 1.423440] usb usb4: SerialNumber: 0000:00:14.0 [ 1.423534] hub 4-0:1.0: USB hub found [ 1.423639] hub 4-0:1.0: 6 ports detected [ 1.427286] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.427404] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d1b000 [ 1.443250] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.443303] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.443304] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.443305] usb usb3: Product: EHCI Host Controller [ 1.443305] usb usb3: Manufacturer: Linux 4.19.0-21-rt-amd64 ehci_hcd [ 1.443306] usb usb3: SerialNumber: 0000:00:1d.0 [ 1.443480] hub 3-0:1.0: USB hub found [ 1.443486] hub 3-0:1.0: 2 ports detected [ 1.450901] checking generic (e0000000 7f0000) vs hw (e0000000 10000000) [ 1.450902] fb: switching to inteldrmfb from EFI VGA [ 1.450921] Console: switching to colour dummy device 80x25 [ 1.451028] [drm] Replacing VGA console driver [ 1.451796] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.451797] [drm] Driver supports precise vblank timestamp query. [ 1.452139] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.675159] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.687160] usb 2-8: new full-speed USB device number 2 using xhci_hcd [ 1.703158] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 1.725444] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.725460] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.726669] ata3.00: ATAPI: HL-DT-ST DVDRAM GHD0N, 1.00, max UDMA/133 [ 1.728068] ata3.00: configured for UDMA/133 [ 1.735291] ata1.00: ATA-8: SAMSUNG HM500JI, 2AC101C4, max UDMA/133 [ 1.735292] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.745140] ata1.00: configured for UDMA/133 [ 1.745236] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM500JI 01C4 PQ: 0 ANSI: 5 [ 1.746229] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GHD0N 1.00 PQ: 0 ANSI: 5 [ 1.787346] r8169 0000:02:00.0 enp2s0f0: renamed from eth0 [ 1.792288] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.792292] sd 0:0:0:0: [sda] Write Protect is off [ 1.792293] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.792300] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.796970] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0 [ 1.821254] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.821662] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 [ 1.834223] sr 2:0:0:0: [sr0] scsi3-mmc drive: 40x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.834239] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.834794] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 1.835532] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.835536] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.835839] hub 1-1:1.0: USB hub found [ 1.835902] hub 1-1:1.0: 6 ports detected [ 1.837308] usb 2-8: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01 [ 1.837324] usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.837326] usb 2-8: Product: USB Receiver [ 1.837328] usb 2-8: Manufacturer: Logitech [ 1.848530] hidraw: raw HID events driver (C) Jiri Kosina [ 1.850725] fbcon: inteldrmfb (fb0) is primary device [ 1.860710] sda: sda1 sda2 sda3 [ 1.861305] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.863565] usb 3-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.863567] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.863803] hub 3-1:1.0: USB hub found [ 1.863888] hub 3-1:1.0: 6 ports detected [ 1.923434] Console: switching to colour frame buffer device 240x67 [ 1.950469] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.967256] tsc: Refined TSC clocksource calibration: 2893.303 MHz [ 1.967265] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b48c6eeb1, max_idle_ns: 440795229827 ns [ 1.967286] clocksource: Switched to clocksource tsc [ 1.978227] usbcore: registered new interface driver usbhid [ 1.978228] usbhid: USB HID core driver [ 1.979960] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/0003:046D:C534.0001/input/input4 [ 2.039768] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-8/input0 [ 2.040423] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.1/0003:046D:C534.0002/input/input5 [ 2.040682] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.1/0003:046D:C534.0002/input/input6 [ 2.099478] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.1/0003:046D:C534.0002/input/input7 [ 2.099869] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-8/input1 [ 2.995816] PM: Image not found (code -22) [ 3.194280] cryptd: max_cpu_qlen set to 1000 [ 3.337309] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 5.360574] systemd[1]: Inserted module 'autofs4' [ 5.714652] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 5.731473] systemd[1]: Detected architecture x86-64. [ 5.754426] systemd[1]: Set hostname to . [ 6.934612] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 6.934845] systemd[1]: Listening on Journal Audit Socket. [ 6.935120] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 6.935333] systemd[1]: Listening on Journal Socket. [ 6.974713] systemd[1]: Starting Set the console keyboard layout... [ 7.018037] systemd[1]: Starting Load Kernel Modules... [ 7.018941] systemd[1]: Mounting Kernel Debug File System... [ 7.558399] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 7.754269] systemd-journald[269]: Received request to flush runtime journal from PID 1 [ 8.710557] input: PC Speaker as /devices/platform/pcspkr/input/input10 [ 9.003656] parport_pc 00:06: reported by Plug and Play ACPI [ 9.003772] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 9.176010] ppdev: user-space parallel port driver [ 9.220221] tpm_tis 00:0a: 1.2 TPM (device-id 0xFE, rev-id 2) [ 9.242633] iTCO_vendor_support: vendor-support=0 [ 9.251826] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 9.251879] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860) [ 9.252028] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 9.256605] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.256663] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 9.310281] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 9.310282] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 9.310283] RAPL PMU: hw unit of domain package 2^-14 Joules [ 9.310284] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 9.310284] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 9.667889] version 39.2 [ 9.682711] ipmi device interface [ 10.101836] IPMI System Interface driver. [ 10.101906] ipmi_si: Unable to find any System Interface(s) [ 10.668190] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 10.668337] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 10.668439] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 10.728904] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11 [ 10.728981] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12 [ 10.729025] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13 [ 10.729068] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14 [ 10.729107] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15 [ 10.764505] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC662 rev3: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 10.764508] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 10.764509] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 10.764510] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 10.764511] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 10.764512] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 10.764513] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 10.764514] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ 10.781966] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16 [ 10.782022] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17 [ 10.782068] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18 [ 10.782113] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19 [ 10.782156] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20 [ 10.973031] intel_rapl: Found RAPL domain package [ 10.973035] intel_rapl: Found RAPL domain core [ 10.973037] intel_rapl: Found RAPL domain uncore [ 10.973039] intel_rapl: Found RAPL domain dram [ 10.973043] intel_rapl: RAPL package 0 domain package locked by BIOS [ 10.973052] intel_rapl: RAPL package 0 domain dram locked by BIOS [ 12.464489] Adding 999420k swap on /dev/sda3. Priority:-2 extents:1 across:999420k FS [ 15.524869] audit: type=1400 audit(1681554858.786:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=421 comm="apparmor_parser" [ 15.524873] audit: type=1400 audit(1681554858.786:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=421 comm="apparmor_parser" [ 15.524913] audit: type=1400 audit(1681554858.786:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=422 comm="apparmor_parser" [ 15.589531] audit: type=1400 audit(1681554858.850:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=423 comm="apparmor_parser" [ 15.589538] audit: type=1400 audit(1681554858.850:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=423 comm="apparmor_parser" [ 15.589542] audit: type=1400 audit(1681554858.850:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=423 comm="apparmor_parser" [ 15.608520] audit: type=1400 audit(1681554858.870:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=424 comm="apparmor_parser" [ 15.634510] audit: type=1400 audit(1681554858.894:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=425 comm="apparmor_parser" [ 15.679821] audit: type=1400 audit(1681554858.942:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=420 comm="apparmor_parser" [ 15.679824] audit: type=1400 audit(1681554858.942:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=420 comm="apparmor_parser" [ 18.409124] ec_master: loading out-of-tree module taints kernel. [ 18.409600] ec_master: module verification failed: signature and/or required key missing - tainting kernel [ 18.423805] EtherCAT: Master driver 1.5.2 unknown [ 18.423891] EtherCAT: 1 master waiting for devices. [ 18.456158] ec_generic: EtherCAT master generic Ethernet device module 1.5.2 unknown [ 18.456173] EtherCAT: Accepting B8:AE:ED:B7:47:18 as main device for master 0. [ 18.456185] ec_generic: Binding socket to interface 2 (enp2s0f0). [ 18.499238] EtherCAT 0: Starting EtherCAT-IDLE thread. [ 18.499406] EtherCAT 0: Link state of ecm0 changed to UP. [ 18.511309] EtherCAT WARNING 0: 1 datagram TIMED OUT! [ 19.511206] EtherCAT WARNING 0: 124 datagrams TIMED OUT! [ 20.511312] EtherCAT WARNING 0: 124 datagrams TIMED OUT! [ 21.515325] EtherCAT WARNING 0: 123 datagrams TIMED OUT! [ 22.515330] EtherCAT WARNING 0: 121 datagrams TIMED OUT! [ 23.515201] EtherCAT WARNING 0: 125 datagrams TIMED OUT! [ 24.523246] EtherCAT WARNING 0: 117 datagrams TIMED OUT! [ 25.132276] IPv6: ADDRCONF(NETDEV_UP): enp2s0f0: link is not ready [ 25.133215] RTL8211B Gigabit Ethernet r8169-200:00: attached PHY driver [RTL8211B Gigabit Ethernet] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE) [ 25.139207] EtherCAT 0: Link state of ecm0 changed to DOWN. [ 25.232527] IPv6: ADDRCONF(NETDEV_UP): enp2s0f0: link is not ready [ 25.233386] r8169 0000:02:00.0 enp2s0f0: Link is Down [ 26.304994] broken atomic modeset userspace detected, disabling atomic [ 26.823190] r8169 0000:02:00.0 enp2s0f0: Link is Up - 100Mbps/Full - flow control off [ 26.823202] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0f0: link becomes ready [ 26.823224] EtherCAT 0: Link state of ecm0 changed to UP. [ 26.831198] EtherCAT 0: 1 slave(s) responding on main device. [ 26.831202] EtherCAT 0: Slave states on main device: INIT. [ 26.831328] EtherCAT 0: Scanning bus. [ 26.863969] EtherCAT 0: Bus scanning completed in 32 ms. [ 26.863971] EtherCAT 0: Using slave 0 as DC reference clock. [ 26.871213] EtherCAT 0: Slave states on main device: PREOP. [ 30.106146] EtherCAT ERROR 0-0: SDO information error response while fetching SDO 0x0678! [ 30.106150] EtherCAT ERROR 0-0: SDO abort message 0x06010000: "Unsupported access to an object". [ 274.670316] EtherCAT: Requesting master 0... [ 274.670318] EtherCAT: Successfully requested master 0. [ 274.670443] EtherCAT 0: Domain0: Logical address 0x00000000, 24 byte, expected working counter 3. [ 274.670444] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 24 byte, type LRW. [ 274.670451] EtherCAT 0: Master thread exited. [ 274.670453] EtherCAT 0: Starting EtherCAT-OP thread. [ 274.670475] EtherCAT WARNING 0: 76 datagrams TIMED OUT! [ 274.771154] EtherCAT 0: Slave states on main device: OP. tomasz@debian:~$ ethercat master Master0 Phase: Operation Active: yes Slaves: 1 Ethernet devices: Main: b8:ae:ed:b7:47:18 (attached) Link: UP Tx frames: 156809 Tx bytes: 12988464 Rx frames: 156808 Rx bytes: 12988380 Tx errors: 0 Tx frame rate [1/s]: 1000 1000 883 Tx rate [KByte/s]: 83.5 83.5 73.4 Rx frame rate [1/s]: 1000 1000 883 Rx rate [KByte/s]: 83.5 83.5 73.4 Common: Tx frames: 156809 Tx bytes: 12988464 Rx frames: 156808 Rx bytes: 12988380 Lost frames: 0 Tx frame rate [1/s]: 1000 1000 883 Tx rate [KByte/s]: 83.5 83.5 73.4 Rx frame rate [1/s]: 1000 1000 883 Rx rate [KByte/s]: 83.5 83.5 73.4 Loss rate [1/s]: 0 0 0 Frame loss [%]: 0.0 0.0 0.0 Distributed clocks: Reference clock: Slave 0 DC reference time: 734870317937489000 Application time: 734870438688243819 2023-04-15 10:40:38.688243819 tomasz@debian:~$ ethercat pdos SM0: PhysAddr 0x1800, DefaultSize 384, ControlRegister 0x26, Enable 1 SM1: PhysAddr 0x1a00, DefaultSize 384, ControlRegister 0x22, Enable 1 SM2: PhysAddr 0x1000, DefaultSize 10, ControlRegister 0x24, Enable 1 RxPDO 0x1601 "" PDO entry 0x607a:00, 32 bit, "" PDO entry 0x60ff:00, 32 bit, "" PDO entry 0x6040:00, 16 bit, "" SM3: PhysAddr 0x1100, DefaultSize 10, ControlRegister 0x00, Enable 1 TxPDO 0x1a01 "" PDO entry 0x6064:00, 32 bit, "" PDO entry 0x606c:00, 32 bit, "" PDO entry 0x6041:00, 16 bit, "" tomasz@debian:~$ halcmd show pin lcec Component Pins: Owner Type Dir Value Name 27 s32 OUT 0 lcec.0.0.actual-position ==> 0-drv-act-pos 27 s32 OUT 0 lcec.0.0.actual-torque 27 s32 OUT 0 lcec.0.0.actual-velocity ==> 0-drv-act-velo 27 u32 IN 0x00000004 lcec.0.0.cia-controlword <== 0-controlword 27 u32 OUT 0x00000000 lcec.0.0.cia-statusword ==> 0-statusword 27 s32 IN 0 lcec.0.0.opmode <== 0-modes-of-operation 27 s32 OUT 0 lcec.0.0.opmode-display ==> 0-opmode-display 27 bit OUT FALSE lcec.0.0.slave-online 27 bit OUT FALSE lcec.0.0.slave-oper 27 bit OUT FALSE lcec.0.0.slave-state-init 27 bit OUT FALSE lcec.0.0.slave-state-op 27 bit OUT FALSE lcec.0.0.slave-state-preop 27 bit OUT FALSE lcec.0.0.slave-state-safeop 27 s32 IN 0 lcec.0.0.target-position <== 0-drv-target-pos 27 s32 IN 0 lcec.0.0.target-velocity <== 0-drv-target-velo 27 bit OUT TRUE lcec.0.all-op 27 bit OUT TRUE lcec.0.link-up 27 s32 OUT 0 lcec.0.read.time 27 u32 OUT 0x00000001 lcec.0.slaves-responding 27 bit OUT FALSE lcec.0.state-init 27 bit OUT TRUE lcec.0.state-op 27 bit OUT FALSE lcec.0.state-preop 27 bit OUT FALSE lcec.0.state-safeop 27 s32 OUT 0 lcec.0.write.time 27 bit OUT TRUE lcec.all-op 24 u32 OUT 0x00000001 lcec.conf.master-count 24 u32 OUT 0x00000001 lcec.conf.slave-count 27 bit OUT TRUE lcec.link-up 27 s32 OUT 6356 lcec.read-all.time 27 u32 OUT 0x00000001 lcec.slaves-responding 27 bit OUT FALSE lcec.state-init 27 bit OUT TRUE lcec.state-op 27 bit OUT FALSE lcec.state-preop 27 bit OUT FALSE lcec.state-safeop 27 s32 OUT 13801 lcec.write-all.time tomasz@debian:~$ ethercat upload -p 0 -t int32 0x6064 0 0x0016336e 1454958 tomasz@debian:~$