hm2/hm2_7i92.0: registered
creating ladder-state
Found file(REL): ./custom.hal
/home/cnc/linuxcnc/configs/test2.11/test2.11.ini:289: executing 'import sys
sys.path.insert(0,"python")'
PythonPlugin: Python  '3.7.3 (default, Jan 22 2021, 20:04:44) 
[GCC 8.3.0]'
initialize: module '/home/cnc/linuxcnc/configs/test2.11/python/toplevel.py' init failed: 
Traceback (most recent call last):

  File "/home/cnc/linuxcnc/configs/test2.11/python/toplevel.py", line 19, in <module>
    import remap

  File "python/remap.py", line 19, in <module>
    from stdglue import *

  File "python/stdglue.py", line 59

    print "change_prolog: Toolchanger soft fault %d" % int(self.params[5601])

                                                   ^

SyntaxError: invalid syntax

Interp ctor: can't instantiate Python plugin
/home/cnc/linuxcnc/configs/test2.11/test2.11.ini:289: executing 'import sys
sys.path.insert(0,"python")'
PythonPlugin: Python  '3.7.3 (default, Jan 22 2021, 20:04:44) 
[GCC 8.3.0]'
initialize: module '/home/cnc/linuxcnc/configs/test2.11/python/toplevel.py' init failed: 
Traceback (most recent call last):

  File "/home/cnc/linuxcnc/configs/test2.11/python/toplevel.py", line 19, in <module>
    import remap

  File "python/remap.py", line 19, in <module>
    from stdglue import *

  File "python/stdglue.py", line 59

    print "change_prolog: Toolchanger soft fault %d" % int(self.params[5601])

                                                   ^

SyntaxError: invalid syntax

Python plugin configure() failed, status = -11
Python plugin required for prolog=, but not available: 56:REMAP = M6  modalgroup=6 prolog=change_prolog ngc=change epilog=change_epilog
Python plugin required for epilog=, but not available: 56:REMAP = M6  modalgroup=6 prolog=change_prolog ngc=change epilog=change_epilog

emc/task/emctaskmain.cc 3013: can't initialize interpreter
[Gmoccapy.QTVCP.QT_ISTAT][WARNING]  INI Parsing Error, No DEFAULT_SPINDLE_0_SPEED Entry in DISPLAY, Using: 200 (qt_istat.py:532)
[Gmoccapy.QTVCP.QT_ISTAT][WARNING]  INI Parsing Error, No MIN_SPINDLE_0_SPEED Entry in DISPLAY, Using: 100 (qt_istat.py:532)
[Gmoccapy.QTVCP.QT_ISTAT][WARNING]  INI Parsing Error, No MAX_SPINDLE_0_SPEED Entry in DISPLAY, Using: 2500 (qt_istat.py:532)
[Gmoccapy.QTVCP.QT_ISTAT][WARNING]  INI Parsing Error, No MAX_SPINDLE_0_OVERRIDE Entry in DISPLAY, Using: 1 (qt_istat.py:532)
[Gmoccapy.QTVCP.QT_ISTAT][WARNING]  INI Parsing Error, No MIN_SPINDLE_0_OVERRIDE Entry in DISPLAY, Using: 0.5 (qt_istat.py:532)

(gmoccapy:32494): Gtk-CRITICAL **: 23:17:28.445: gtk_entry_set_text: assertion 'text != NULL' failed
[Gmoccapy.GMOCCAPY.GETINIINFO][WARNING]  Found kinstype=BOTH but using trivkins. It is not recommended to do so! Will use mode to switch between Joints and World mode, hopefully supported by the used <<trivkins>> module. (getiniinfo.py:185)
[Gmoccapy.GMOCCAPY.GETINIINFO][WARNING]  No DEFAULT_SPINDLE_SPEED entry found in [DISPLAY] of INI file (getiniinfo.py:282)
[Gmoccapy][WARNING]  No virtual keyboard installed, we checked for <onboard>. Try 'sudo apt-get install onboard'. (gmoccapy:2108)
[Gmoccapy.GMOCCAPY.GETINIINFO][WARNING]  Wrong entry [DISPLAY] CYCLE_TIME in INI File! Will use gmoccapy default 150 (getiniinfo.py:56)