linuxcnc@XXXXXX:~$ linuxcnc
LINUXCNC - 2.8.4
Machine configuration directory is '/home/linuxcnc/linuxcnc/configs/7i76e_7i85_netem'
Machine configuration file is '7i76e_7i85.ini'
Starting LinuxCNC...
Found file(REL): ./7i76e_7i85.hal
Note: Using POSIX realtime
hm2: loading Mesa HostMot2 driver version 0.15
hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.2
hm2_eth: 192.168.1.121: INFO: Hardware address (MAC): 00:60:1b:10:49:f3
hm2_eth: discovered 7I76E-16
hm2/hm2_7i76e.0: Low Level init 0.15
hm2/hm2_7i76e.0: Smart Serial Firmware Version 43
Board hm2_7i76e.0.7i76.0.0 Hardware Mode 0 = standard
Board hm2_7i76e.0.7i76.0.0 Software Mode 0 = io_spin
Waiting for component 'hm2_eth' to become ready..Board hm2_7i76e.0.7i76.0.0 Software Mode 1 = io_ana_spin
...Board hm2_7i76e.0.7i76.0.0 Software Mode 2 = io_enc_ana_spin_fv
.............................................board fails HM2 registration
hm2_eth: in hm2_eth_reset
hm2_eth: rtapi_app_main: Resource temporarily unavailable (-11)
./7i76e_7i85.hal:9: waitpid failed /usr/bin/rtapi_app hm2_eth

./7i76e_7i85.hal:9: /usr/bin/rtapi_app exited without becoming ready
./7i76e_7i85.hal:9: insmod for hm2_eth failed, returned -1
Shutting down and cleaning up LinuxCNC...
Running HAL shutdown script
hm2: unloading
Note: Using POSIX realtime
LinuxCNC terminated with an error.  You can find more information in the log:
    /home/linuxcnc/linuxcnc_debug.txt
and
    /home/linuxcnc/linuxcnc_print.txt
as well as in the output of the shell command 'dmesg' and in the terminal