[ 0.000000] microcode: microcode updated early to revision 0x21, date = 2019-02-13 [ 0.000000] Linux version 4.19.0-27-rt-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP PREEMPT RT Debian 4.19.316-1 (2024-06-25) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-27-rt-amd64 root=UUID=2786ed59-4189-41fe-9a67-b3a899aaff46 ro initrd=/install/gtk/initrd.gz isolcpus=1,2,3 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000d2a64fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d2a65000-0x00000000d2aa7fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000d2aa8000-0x00000000d6d7dfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d6d7e000-0x00000000d6ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d7000000-0x00000000d7740fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d7741000-0x00000000d77fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d7800000-0x00000000d7fb3fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d7fb4000-0x00000000d7ffffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000d8000000-0x00000000d971ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d9720000-0x00000000d97fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000d9800000-0x00000000daf23fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000daf24000-0x00000000dafa5fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dafa6000-0x00000000dafa6fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dafa7000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Dell Inc. OptiPlex 3010/042P49, BIOS A11 09/16/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3192.583 MHz processor [ 0.003650] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.003651] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.003658] last_pfn = 0x21f600 max_arch_pfn = 0x400000000 [ 0.003661] MTRR default type: uncachable [ 0.003662] MTRR fixed ranges enabled: [ 0.003663] 00000-9FFFF write-back [ 0.003663] A0000-BFFFF uncachable [ 0.003664] C0000-CFFFF write-protect [ 0.003664] D0000-E7FFF uncachable [ 0.003665] E8000-FFFFF write-protect [ 0.003665] MTRR variable ranges enabled: [ 0.003666] 0 base 000000000 mask E00000000 write-back [ 0.003667] 1 base 200000000 mask FE0000000 write-back [ 0.003667] 2 base 0E0000000 mask FE0000000 uncachable [ 0.003668] 3 base 0DC000000 mask FFC000000 uncachable [ 0.003668] 4 base 0DB800000 mask FFF800000 uncachable [ 0.003669] 5 base 21F800000 mask FFF800000 uncachable [ 0.003670] 6 base 21F600000 mask FFFE00000 uncachable [ 0.003670] 7 disabled [ 0.003670] 8 disabled [ 0.003670] 9 disabled [ 0.004314] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.004402] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved [ 0.004405] last_pfn = 0xdafa7 max_arch_pfn = 0x400000000 [ 0.012682] found SMP MP-table at [mem 0x000fd9b0-0x000fd9bf] [ 0.023791] RAMDISK: [mem 0x30111000-0x3407ffff] [ 0.023795] ACPI: Early table checksum verification disabled [ 0.028850] ACPI: RSDP 0x00000000000F0490 000024 (v02 DELL ) [ 0.028852] ACPI: XSDT 0x00000000D7FF5078 000074 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.028857] ACPI: FACP 0x00000000D7FFE708 00010C (v05 DELL CBX3 01072009 AMI 00010013) [ 0.028861] ACPI: DSDT 0x00000000D7FF5180 009582 (v02 DELL CBX3 00000022 INTL 20091112) [ 0.028863] ACPI: FACS 0x00000000D97FE080 000040 [ 0.028865] ACPI: APIC 0x00000000D7FFE818 000072 (v03 DELL CBX3 01072009 AMI 00010013) [ 0.028867] ACPI: FPDT 0x00000000D7FFE890 000044 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.028869] ACPI: MCFG 0x00000000D7FFE8D8 00003C (v01 DELL CBX3 01072009 MSFT 00000097) [ 0.028871] ACPI: ASF! 0x00000000D7FFE918 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.028873] ACPI: HPET 0x00000000D7FFE9C0 000038 (v01 DELL CBX3 01072009 AMI. 00000005) [ 0.028875] ACPI: SSDT 0x00000000D7FFE9F8 000415 (v01 SataRe SataTabl 00001000 INTL 20091112) [ 0.028878] ACPI: SSDT 0x00000000D7FFEE10 000B22 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.028880] ACPI: DMAR 0x00000000D7FFF938 0000B0 (v01 INTEL SNB 00000001 INTL 00000001) [ 0.028882] ACPI: SLIC 0x00000000D7FFF9E8 000176 (v03 DELL CBX3 01072009 MSFT 00010013) [ 0.028884] ACPI: Reserving FACP table memory at [mem 0xd7ffe708-0xd7ffe813] [ 0.028884] ACPI: Reserving DSDT table memory at [mem 0xd7ff5180-0xd7ffe701] [ 0.028885] ACPI: Reserving FACS table memory at [mem 0xd97fe080-0xd97fe0bf] [ 0.028885] ACPI: Reserving APIC table memory at [mem 0xd7ffe818-0xd7ffe889] [ 0.028886] ACPI: Reserving FPDT table memory at [mem 0xd7ffe890-0xd7ffe8d3] [ 0.028886] ACPI: Reserving MCFG table memory at [mem 0xd7ffe8d8-0xd7ffe913] [ 0.028887] ACPI: Reserving ASF! table memory at [mem 0xd7ffe918-0xd7ffe9bc] [ 0.028887] ACPI: Reserving HPET table memory at [mem 0xd7ffe9c0-0xd7ffe9f7] [ 0.028888] ACPI: Reserving SSDT table memory at [mem 0xd7ffe9f8-0xd7ffee0c] [ 0.028888] ACPI: Reserving SSDT table memory at [mem 0xd7ffee10-0xd7fff931] [ 0.028889] ACPI: Reserving DMAR table memory at [mem 0xd7fff938-0xd7fff9e7] [ 0.028889] ACPI: Reserving SLIC table memory at [mem 0xd7fff9e8-0xd7fffb5d] [ 0.028897] ACPI: Local APIC address 0xfee00000 [ 0.028965] No NUMA configuration found [ 0.028965] Faking a node at [mem 0x0000000000000000-0x000000021f5fffff] [ 0.028968] NODE_DATA(0) allocated [mem 0x21f5f4000-0x21f5f8fff] [ 0.028994] Zone ranges: [ 0.028994] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.028995] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.028996] Normal [mem 0x0000000100000000-0x000000021f5fffff] [ 0.028997] Device empty [ 0.028997] Movable zone start for each node [ 0.028998] Early memory node ranges [ 0.028998] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.028999] node 0: [mem 0x0000000000100000-0x000000001fffffff] [ 0.028999] node 0: [mem 0x0000000020200000-0x0000000040003fff] [ 0.028999] node 0: [mem 0x0000000040005000-0x00000000d2a64fff] [ 0.029000] node 0: [mem 0x00000000d2aa8000-0x00000000d6d7dfff] [ 0.029000] node 0: [mem 0x00000000d7000000-0x00000000d7740fff] [ 0.029001] node 0: [mem 0x00000000d7800000-0x00000000d7fb3fff] [ 0.029001] node 0: [mem 0x00000000d8000000-0x00000000d971ffff] [ 0.029001] node 0: [mem 0x00000000d9800000-0x00000000daf23fff] [ 0.029002] node 0: [mem 0x00000000dafa6000-0x00000000dafa6fff] [ 0.029002] node 0: [mem 0x0000000100000000-0x000000021f5fffff] [ 0.029363] Zeroed struct page in unavailable ranges: 25072 pages [ 0.029364] Initmem setup node 0 [mem 0x0000000000001000-0x000000021f5fffff] [ 0.029365] On node 0 totalpages: 2072080 [ 0.029366] DMA zone: 64 pages used for memmap [ 0.029366] DMA zone: 21 pages reserved [ 0.029367] DMA zone: 3996 pages, LIFO batch:0 [ 0.029446] DMA32 zone: 13922 pages used for memmap [ 0.029447] DMA32 zone: 890996 pages, LIFO batch:63 [ 0.047102] Normal zone: 18392 pages used for memmap [ 0.047103] Normal zone: 1177088 pages, LIFO batch:63 [ 0.069023] Reserving Intel graphics memory at [mem 0xdba00000-0xdf9fffff] [ 0.069100] ACPI: PM-Timer IO Port: 0x408 [ 0.069101] ACPI: Local APIC address 0xfee00000 [ 0.069107] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.069118] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.069119] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.069120] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.069121] ACPI: IRQ0 used by override. [ 0.069122] ACPI: IRQ9 used by override. [ 0.069124] Using ACPI (MADT) for SMP configuration information [ 0.069125] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.069128] TSC deadline timer available [ 0.069129] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.069156] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.069157] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.069157] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.069158] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.069158] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.069159] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.069160] PM: Registered nosave memory: [mem 0x40004000-0x40004fff] [ 0.069162] PM: Registered nosave memory: [mem 0xd2a65000-0xd2aa7fff] [ 0.069163] PM: Registered nosave memory: [mem 0xd6d7e000-0xd6ffffff] [ 0.069164] PM: Registered nosave memory: [mem 0xd7741000-0xd77fffff] [ 0.069165] PM: Registered nosave memory: [mem 0xd7fb4000-0xd7ffffff] [ 0.069166] PM: Registered nosave memory: [mem 0xd9720000-0xd97fffff] [ 0.069167] PM: Registered nosave memory: [mem 0xdaf24000-0xdafa5fff] [ 0.069169] PM: Registered nosave memory: [mem 0xdafa7000-0xdf9fffff] [ 0.069169] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff] [ 0.069169] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.069170] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.069170] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.069170] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.069171] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.069171] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.069171] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.069172] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.069172] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.069172] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.069173] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.069176] [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.069177] Booting paravirtualized kernel on bare hardware [ 0.069179] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.157997] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.158136] percpu: Embedded 51 pages/cpu s169984 r8192 d30720 u524288 [ 0.158142] pcpu-alloc: s169984 r8192 d30720 u524288 alloc=1*2097152 [ 0.158143] pcpu-alloc: [0] 0 1 2 3 [ 0.158162] Built 1 zonelists, mobility grouping on. Total pages: 2039681 [ 0.158162] Policy zone: Normal [ 0.158164] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-27-rt-amd64 root=UUID=2786ed59-4189-41fe-9a67-b3a899aaff46 ro initrd=/install/gtk/initrd.gz isolcpus=1,2,3 [ 0.161182] Calgary: detecting Calgary via BIOS EBDA area [ 0.161183] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.181581] Memory: 8000604K/8288320K available (10248K kernel code, 1308K rwdata, 3196K rodata, 1568K init, 2168K bss, 287716K reserved, 0K cma-reserved) [ 0.181749] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.181762] Kernel/User page tables isolation: enabled [ 0.181799] ftrace: allocating 32012 entries in 126 pages [ 0.193779] ftrace: allocated 126 pages with 6 groups [ 0.193869] rcu: Preemptible hierarchical RCU implementation. [ 0.193870] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. [ 0.193870] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.193871] No expedited grace period (rcu_normal_after_boot). [ 0.193871] Tasks RCU enabled. [ 0.193871] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.196464] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16 [ 0.196653] random: crng init done [ 0.198201] Console: colour VGA+ 80x25 [ 0.207037] console [tty0] enabled [ 0.207050] ACPI: Core revision 20180810 [ 0.207190] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.207200] hpet clockevent registered [ 0.207204] APIC: Switch to symmetric I/O mode setup [ 0.207206] DMAR: Host address width 36 [ 0.207207] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.207211] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a [ 0.207212] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.207214] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f010da [ 0.207215] DMAR: RMRR base: 0x000000daf78000 end: 0x000000daf9efff [ 0.207215] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff [ 0.207217] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.207217] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.207217] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.207631] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.207632] x2apic enabled [ 0.207638] Switched APIC routing to cluster x2apic. [ 0.208068] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.227206] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e04ebafb17, max_idle_ns: 440795304015 ns [ 0.227218] Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.16 BogoMIPS (lpj=12770332) [ 0.227233] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.227234] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.227244] CPU0: Thermal monitoring enabled (TM1) [ 0.227252] process: using mwait in idle threads [ 0.227254] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.227255] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.227256] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.227259] Spectre V2 : Mitigation: Enhanced / Automatic IBRS [ 0.227259] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.227259] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT [ 0.227264] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.227265] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.227288] MDS: Mitigation: Clear CPU buffers [ 0.227289] MMIO Stale Data: Unknown: No mitigations [ 0.227289] SRBDS: Vulnerable: No microcode [ 0.227294] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.227294] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.227295] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.227296] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.227296] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.227440] Freeing SMP alternatives memory: 24K [ 0.228082] pid_max: default: 32768 minimum: 301 [ 0.228109] Security Framework initialized [ 0.228110] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.228124] AppArmor: AppArmor initialized [ 0.229753] Dentry cache hash table entries: 1048576 (order: 12, 16777216 bytes) [ 0.232037] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.232063] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.232075] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.232470] smpboot: CPU0: Intel(R) Core(TM) i5-3470 CPU @ 3.20GHz (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.235543] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.235634] ... version: 3 [ 0.235690] ... bit width: 48 [ 0.235746] ... generic registers: 8 [ 0.235802] ... value mask: 0000ffffffffffff [ 0.235860] ... max period: 00007fffffffffff [ 0.235916] ... fixed-purpose events: 3 [ 0.235973] ... event mask: 00000007000000ff [ 0.236080] rcu: Hierarchical SRCU implementation. [ 0.236664] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.236765] smp: Bringing up secondary CPUs ... [ 0.236931] x86: Booting SMP configuration: [ 0.236988] .... node #0, CPUs: #1 #2 #3 [ 0.246138] smp: Brought up 1 node, 4 CPUs [ 0.246138] smpboot: Max logical packages: 1 [ 0.246138] smpboot: Total of 4 processors activated (25540.66 BogoMIPS) [ 0.247473] devtmpfs: initialized [ 0.247588] x86/mm: Memory block size: 128MB [ 0.248533] PM: Registering ACPI NVS region [mem 0xd2a65000-0xd2aa7fff] (274432 bytes) [ 0.248608] PM: Registering ACPI NVS region [mem 0xd9720000-0xd97fffff] (917504 bytes) [ 0.248739] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.248826] futex hash table entries: 1024 (order: 5, 131072 bytes) [ 0.248931] pinctrl core: initialized pinctrl subsystem [ 0.249146] NET: Registered protocol family 16 [ 0.249284] audit: initializing netlink subsys (disabled) [ 0.249450] cpuidle: using governor ladder [ 0.249509] cpuidle: using governor menu [ 0.249595] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.249665] ACPI: bus type PCI registered [ 0.249721] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.249838] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.249911] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.249977] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override. [ 0.250117] PCI: Using configuration type 1 for base access [ 0.250205] audit: type=2000 audit(1723194700.040:1): state=initialized audit_enabled=0 res=1 [ 0.250285] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 0.251222] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.251442] ACPI: Added _OSI(Module Device) [ 0.251498] ACPI: Added _OSI(Processor Device) [ 0.251555] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.251612] ACPI: Added _OSI(Processor Aggregator Device) [ 0.251671] ACPI: Added _OSI(Linux-Dell-Video) [ 0.251727] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.255438] ACPI: 3 ACPI AML tables successfully acquired and loaded [ 0.256606] ACPI BIOS Error (bug): Could not resolve [\_PR.CPU0._PPC], AE_NOT_FOUND (20180810/psargs-330) [ 0.256683] ACPI Error: Method parse/execution failed \_PR.CPU0._PDC, AE_NOT_FOUND (20180810/psparse-516) [ 0.256928] ACPI: Dynamic OEM Table Load: [ 0.256986] ACPI: SSDT 0xFFFFA02F54CCE000 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.257615] ACPI: Interpreter enabled [ 0.257687] ACPI: (supports S0 S3 S4 S5) [ 0.257743] ACPI: Using IOAPIC for interrupt routing [ 0.257819] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.258042] ACPI: Enabled 15 GPEs in block 00 to 3F [ 0.264234] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.264297] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.264534] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME] [ 0.264704] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR] [ 0.264763] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.265181] PCI host bridge to bus 0000:00 [ 0.265239] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.265299] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.265360] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.265430] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.265499] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.265569] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.265639] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.265710] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.265780] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.265851] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window] [ 0.265921] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.265986] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000 [ 0.266069] pci 0000:00:02.0: [8086:0152] type 00 class 0x030000 [ 0.266077] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit] [ 0.266081] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.266084] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.266196] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.266220] pci 0000:00:16.0: reg 0x10: [mem 0xf7d06000-0xf7d0600f 64bit] [ 0.266291] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.266374] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.266394] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d04000-0xf7d043ff] [ 0.266472] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.266551] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.266640] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.266725] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 0.266810] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.266894] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 0.266979] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.267068] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.267088] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d03000-0xf7d033ff] [ 0.267166] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.267256] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100 [ 0.267426] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601 [ 0.267442] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7] [ 0.267448] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3] [ 0.267455] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097] [ 0.267462] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083] [ 0.267469] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.267476] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d02000-0xf7d027ff] [ 0.267514] pci 0000:00:1f.2: PME# supported from D3hot [ 0.267585] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.267602] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d01000-0xf7d010ff 64bit] [ 0.267621] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.267747] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.267977] pci 0000:02:00.0: [9710:9900] type 00 class 0x070103 [ 0.268222] pci 0000:02:00.0: reg 0x10: [io 0xe010-0xe017] [ 0.268417] pci 0000:02:00.0: reg 0x14: [io 0xe000-0xe007] [ 0.268507] pci 0000:02:00.0: reg 0x18: [mem 0xf7c01000-0xf7c01fff] [ 0.268891] pci 0000:02:00.0: reg 0x24: [mem 0xf7c00000-0xf7c00fff] [ 0.270792] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.331309] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.331370] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] [ 0.331373] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.331442] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.331475] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.331507] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref] [ 0.331527] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref] [ 0.331646] pci 0000:03:00.0: supports D1 D2 [ 0.331646] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.331766] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.331826] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.331834] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.332225] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.332322] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.332429] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.332524] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.332621] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.332727] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.332832] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.332938] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.333137] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.333199] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.333273] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.333331] vgaarb: loaded [ 0.333426] pps_core: LinuxPPS API ver. 1 registered [ 0.333484] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.333556] PTP clock support registered [ 0.333618] EDAC MC: Ver: 3.0.0 [ 0.333809] PCI: Using ACPI for IRQ routing [ 0.335311] PCI: pci_cache_line_size set to 64 bytes [ 0.335427] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.335429] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff] [ 0.335429] e820: reserve RAM buffer [mem 0xd2a65000-0xd3ffffff] [ 0.335430] e820: reserve RAM buffer [mem 0xd6d7e000-0xd7ffffff] [ 0.335431] e820: reserve RAM buffer [mem 0xd7741000-0xd7ffffff] [ 0.335432] e820: reserve RAM buffer [mem 0xd7fb4000-0xd7ffffff] [ 0.335433] e820: reserve RAM buffer [mem 0xd9720000-0xdbffffff] [ 0.335434] e820: reserve RAM buffer [mem 0xdaf24000-0xdbffffff] [ 0.335435] e820: reserve RAM buffer [mem 0xdafa7000-0xdbffffff] [ 0.335436] e820: reserve RAM buffer [mem 0x21f600000-0x21fffffff] [ 0.336929] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.336993] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.339235] clocksource: Switched to clocksource tsc-early [ 0.350222] VFS: Disk quotas dquot_6.6.0 [ 0.350296] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.350489] AppArmor: AppArmor Filesystem Enabled [ 0.350563] pnp: PnP ACPI init [ 0.350717] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.350782] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.350848] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.350908] system 00:01: [io 0x1000-0x100f] has been reserved [ 0.350968] system 00:01: [io 0xffff] has been reserved [ 0.351025] system 00:01: [io 0xffff] has been reserved [ 0.351084] system 00:01: [io 0x0400-0x0453] has been reserved [ 0.351144] system 00:01: [io 0x0458-0x047f] has been reserved [ 0.351203] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.351272] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.351333] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.351354] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.351397] system 00:03: [io 0x0454-0x0457] has been reserved [ 0.351458] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.351521] system 00:04: [io 0x0c00-0x0c7f] has been reserved [ 0.351583] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.351626] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.351688] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.351932] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.351991] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.352051] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.352112] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.352173] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.352233] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.352293] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.352354] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.353602] system 00:06: [mem 0xff000000-0xffffffff] has been reserved [ 0.353662] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.353723] system 00:06: [mem 0xdfa00000-0xdfa00fff] has been reserved [ 0.353784] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.353897] system 00:07: [mem 0x20000000-0x201fffff] has been reserved [ 0.353958] system 00:07: [mem 0x40004000-0x40004fff] has been reserved [ 0.354019] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.354029] pnp: PnP ACPI: found 8 devices [ 0.359755] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.359835] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.359904] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.359962] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] [ 0.360024] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.360089] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.360147] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.360210] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.360286] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.360287] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.360288] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.360289] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.360290] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.360290] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.360291] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window] [ 0.360292] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window] [ 0.360293] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window] [ 0.360294] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff window] [ 0.360295] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.360296] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 0.360297] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.360298] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.360369] NET: Registered protocol family 2 [ 0.360564] IP idents hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.361531] tcp_listen_portaddr_hash hash table entries: 4096 (order: 6, 262144 bytes) [ 0.361669] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.361987] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes) [ 0.362609] TCP: Hash tables configured (established 65536 bind 65536) [ 0.362722] UDP hash table entries: 4096 (order: 7, 524288 bytes) [ 0.362892] UDP-Lite hash table entries: 4096 (order: 7, 524288 bytes) [ 0.363067] NET: Registered protocol family 1 [ 0.363128] NET: Registered protocol family 44 [ 0.363203] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling [ 0.363299] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.387352] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6d0 took 23411 usecs [ 0.411346] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6d0 took 23348 usecs [ 0.411435] PCI: CLS mismatch (64 != 32), using 64 bytes [ 0.411481] Unpacking initramfs... [ 1.109585] Freeing initrd memory: 64956K [ 1.109682] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.109744] software IO TLB: mapped [mem 0xd2d7e000-0xd6d7e000] (64MB) [ 1.110421] Initialise system trusted keyrings [ 1.110488] Key type blacklist registered [ 1.110589] workingset: timestamp_bits=40 max_order=21 bucket_order=0 [ 1.111968] zbud: loaded [ 1.244849] Key type asymmetric registered [ 1.244907] Asymmetric key parser 'x509' registered [ 1.244973] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.245068] io scheduler noop registered [ 1.245125] io scheduler deadline registered [ 1.245208] io scheduler cfq registered (default) [ 1.245266] io scheduler mq-deadline registered [ 1.246202] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.246272] intel_idle: MWAIT substates: 0x1120 [ 1.246273] intel_idle: v0.4.1 model 0x3A [ 1.246423] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.246643] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.247079] Linux agpgart interface v0.103 [ 1.247185] AMD IOMMUv2 driver by Joerg Roedel [ 1.247254] AMD IOMMUv2 functionality not available on this system [ 1.247591] i8042: PNP: No PS/2 controller found. [ 1.247647] i8042: Probing ports directly. [ 1.250192] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.250254] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.250396] mousedev: PS/2 mouse device common for all mice [ 1.250478] rtc_cmos 00:02: RTC can wake from S4 [ 1.250705] rtc_cmos 00:02: registered as rtc0 [ 1.250776] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.250854] intel_pstate: Intel P-state driver initializing [ 1.251453] NET: Registered protocol family 10 [ 1.257304] Segment Routing with IPv6 [ 1.257377] mip6: Mobile IPv6 [ 1.257435] NET: Registered protocol family 17 [ 1.257518] mpls_gso: MPLS GSO support [ 1.257865] mce: Using 9 MCE banks [ 1.257948] microcode: sig=0x306a9, pf=0x2, revision=0x21 [ 1.258045] microcode: Microcode Update Driver: v2.2. [ 1.258062] sched_clock: Marking stable (1247290974, 10561083)->(1262791670, -4939613) [ 1.258446] registered taskstats version 1 [ 1.258510] Loading compiled-in X.509 certificates [ 1.289218] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 1.289300] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 1.289388] zswap: loaded using pool lzo/zbud [ 1.289560] AppArmor: AppArmor sha1 policy hashing enabled [ 1.289782] rtc_cmos 00:02: setting system clock to 2024-08-09 09:11:41 UTC (1723194701) [ 1.291072] Freeing unused kernel image memory: 1568K [ 1.291199] Write protecting the kernel read-only data: 16384k [ 1.291978] Freeing unused kernel image memory: 2032K [ 1.292292] Freeing unused kernel image memory: 900K [ 1.299385] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.299446] x86/mm: Checking user space page tables [ 1.305810] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.305871] Run /init as init process [ 1.384091] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 1.399225] ACPI: Power Button [PWRB] [ 1.399402] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.415221] ACPI: Power Button [PWRF] [ 1.486546] SCSI subsystem initialized [ 1.488280] cryptd: max_cpu_qlen set to 1000 [ 1.496117] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20180810/utaddress-213) [ 1.496211] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.496286] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180810/utaddress-213) [ 1.496378] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.496451] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180810/utaddress-213) [ 1.496542] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.496615] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180810/utaddress-213) [ 1.496706] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.496780] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 1.497403] ACPI: bus type USB registered [ 1.497476] usbcore: registered new interface driver usbfs [ 1.497541] usbcore: registered new interface driver hub [ 1.497609] usbcore: registered new device driver usb [ 1.505921] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.506687] ehci-pci: EHCI PCI platform driver [ 1.506880] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.506942] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.507022] ehci-pci 0000:00:1a.0: debug port 2 [ 1.514916] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.523233] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.523351] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.526991] AVX version of gcm_enc/dec engaged. [ 1.527050] AES CTR mode by8 optimization enabled [ 1.538662] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl, c8:1f:66:35:65:9e, XID 2c900800, IRQ 26 [ 1.538736] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.539970] r8169 0000:03:00.0 enp3s0: renamed from eth0 [ 1.543301] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d04000 [ 1.543435] libata version 3.00 loaded. [ 1.547051] ahci 0000:00:1f.2: version 3.0 [ 1.559224] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.559339] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.559411] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.559481] usb usb1: Product: EHCI Host Controller [ 1.559538] usb usb1: Manufacturer: Linux 4.19.0-27-rt-amd64 ehci_hcd [ 1.559598] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.567930] hub 1-0:1.0: USB hub found [ 1.568154] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.568232] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x1 impl SATA mode [ 1.568304] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst [ 1.568545] hub 1-0:1.0: 2 ports detected [ 1.569708] ACPI: Invalid active0 threshold [ 1.570257] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.570319] ACPI: Thermal Zone [TZ00] (28 C) [ 1.570494] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.570556] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.570636] ehci-pci 0000:00:1d.0: debug port 2 [ 1.572258] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.572318] ACPI: Thermal Zone [TZ01] (30 C) [ 1.574605] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.579255] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d03000 [ 1.583244] scsi host0: ahci [ 1.591247] scsi host1: ahci [ 1.595247] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.595351] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.595424] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.595493] usb usb2: Product: EHCI Host Controller [ 1.596739] usb usb2: Manufacturer: Linux 4.19.0-27-rt-amd64 ehci_hcd [ 1.596799] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.597011] hub 2-0:1.0: USB hub found [ 1.597110] hub 2-0:1.0: 2 ports detected [ 1.603237] scsi host2: ahci [ 1.611477] scsi host3: ahci [ 1.611599] ata1: SATA max UDMA/133 abar m2048@0xf7d02000 port 0xf7d02100 irq 27 [ 1.611671] ata2: DUMMY [ 1.611725] ata3: DUMMY [ 1.611779] ata4: DUMMY [ 1.615290] [drm] Replacing VGA console driver [ 1.616320] Console: switching to colour dummy device 80x25 [ 1.617171] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.617175] [drm] Driver supports precise vblank timestamp query. [ 1.618888] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.702954] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0 [ 1.735472] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.736053] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 1.823214] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.842542] fbcon: inteldrmfb (fb0) is primary device [ 1.851231] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.919941] Console: switching to colour frame buffer device 240x75 [ 1.925724] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.930041] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.930043] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.930044] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.931351] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 1.938175] ata1.00: ATA-9: SPCC Solid State Disk, S0222A0, max UDMA/133 [ 1.938176] ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 1.941304] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.946238] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.946240] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.946273] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.947514] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 1.954450] ata1.00: configured for UDMA/133 [ 1.955691] scsi 0:0:0:0: Direct-Access ATA SPCC Solid State 2A0 PQ: 0 ANSI: 5 [ 1.973995] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 1.974030] sd 0:0:0:0: [sda] Write Protect is off [ 1.974049] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.974056] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.975706] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 1.976294] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.979577] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 1.979616] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.979930] hub 1-1:1.0: USB hub found [ 1.980063] hub 1-1:1.0: 4 ports detected [ 2.007675] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 2.007709] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.008017] hub 2-1:1.0: USB hub found [ 2.008170] hub 2-1:1.0: 6 ports detected [ 2.072082] PM: Image not found (code -22) [ 2.127251] tsc: Refined TSC clocksource calibration: 3192.746 MHz [ 2.127282] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e058540c6e, max_idle_ns: 440795222505 ns [ 2.127324] clocksource: Switched to clocksource tsc [ 2.177237] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 2.267222] usb 1-1.1: new high-speed USB device number 3 using ehci-pci [ 2.299230] usb 2-1.5: new low-speed USB device number 3 using ehci-pci [ 2.391804] usb 1-1.1: New USB device found, idVendor=148f, idProduct=5572, bcdDevice= 1.01 [ 2.391839] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.391865] usb 1-1.1: Product: 802.11 n WLAN [ 2.391881] usb 1-1.1: Manufacturer: Ralink [ 2.393172] usb 1-1.1: SerialNumber: 1.0 [ 2.397789] systemd[1]: RTC configured in localtime, applying delta of -240 minutes to system time. [ 2.412094] usb 2-1.5: New USB device found, idVendor=413c, idProduct=301a, bcdDevice= 1.00 [ 2.413437] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.414748] usb 2-1.5: Product: Dell MS116 USB Optical Mouse [ 2.416073] usb 2-1.5: Manufacturer: PixArt [ 2.420697] systemd[1]: Inserted module 'autofs4' [ 2.437746] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 2.459308] systemd[1]: Detected architecture x86-64. [ 2.469633] systemd[1]: Set hostname to . [ 2.495231] usb 2-1.6: new low-speed USB device number 4 using ehci-pci [ 2.612107] usb 2-1.6: New USB device found, idVendor=03f0, idProduct=0024, bcdDevice= 3.00 [ 2.613593] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.615030] usb 2-1.6: Product: HP Basic USB Keyboard [ 2.616468] usb 2-1.6: Manufacturer: CHICONY [ 2.647577] systemd[1]: Listening on Syslog Socket. [ 2.650679] systemd[1]: Listening on udev Control Socket. [ 2.653694] systemd[1]: Listening on fsck to fsckd communication Socket. [ 2.656725] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 2.659800] systemd[1]: Listening on Journal Socket. [ 2.664353] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 2.667411] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 2.751007] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 3.033109] systemd-journald[285]: Received request to flush runtime journal from PID 1 [ 3.255612] loop: module loaded [ 3.263509] EDAC ie31200: No ECC support [ 3.268425] EDAC ie31200: No ECC support [ 3.307601] iTCO_vendor_support: vendor-support=0 [ 3.309427] hidraw: raw HID events driver (C) Jiri Kosina [ 3.328760] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.337912] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 3.368006] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 3.368064] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 3.368143] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 3.382680] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 3.382681] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 3.382682] RAPL PMU: hw unit of domain package 2^-16 Joules [ 3.382682] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 3.428718] usbcore: registered new interface driver usbhid [ 3.428719] usbhid: USB HID core driver [ 3.456112] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 3.555077] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 3.770745] input: PixArt Dell MS116 USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:413C:301A.0001/input/input7 [ 3.772470] hid-generic 0003:413C:301A.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-0000:00:1d.0-1.5/input0 [ 3.773777] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:03F0:0024.0002/input/input8 [ 3.835674] hid-generic 0003:03F0:0024.0002: input,hidraw1: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:1d.0-1.6/input0 [ 4.029350] intel_rapl: Found RAPL domain package [ 4.030485] intel_rapl: Found RAPL domain core [ 4.032802] intel_rapl: Found RAPL domain uncore [ 4.033914] intel_rapl: RAPL package 0 domain package locked by BIOS [ 4.151585] usb 1-1.1: reset high-speed USB device number 3 using ehci-pci [ 4.158228] Adding 2974716k swap on /dev/sda6. Priority:-2 extents:1 across:2974716k SSFS [ 4.234748] audit: type=1400 audit(1723209104.439:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=416 comm="apparmor_parser" [ 4.236326] audit: type=1400 audit(1723209104.443:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=416 comm="apparmor_parser" [ 4.241325] audit: type=1400 audit(1723209104.447:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=415 comm="apparmor_parser" [ 4.243140] audit: type=1400 audit(1723209104.447:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=415 comm="apparmor_parser" [ 4.244940] audit: type=1400 audit(1723209104.451:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=417 comm="apparmor_parser" [ 4.246177] audit: type=1400 audit(1723209104.451:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=417 comm="apparmor_parser" [ 4.249869] audit: type=1400 audit(1723209104.455:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=419 comm="apparmor_parser" [ 4.261688] audit: type=1400 audit(1723209104.467:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=421 comm="apparmor_parser" [ 4.263633] audit: type=1400 audit(1723209104.471:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=420 comm="apparmor_parser" [ 4.268948] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected [ 4.309797] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 000f detected [ 4.324340] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 4.324587] usbcore: registered new interface driver rt2800usb [ 4.333029] rt2800usb 1-1.1:1.0 wlx24050f34376a: renamed from wlan0 [ 5.166043] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 5.179224] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw [ 5.182331] RTL8211E Gigabit Ethernet r8169-300:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE) [ 5.393299] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 5.427093] IPv6: ADDRCONF(NETDEV_UP): wlx24050f34376a: link is not ready [ 5.428387] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 5.430788] rt2800usb 1-1.1:1.0: firmware: direct-loading firmware rt2870.bin [ 5.432593] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 [ 5.809909] IPv6: ADDRCONF(NETDEV_UP): wlx24050f34376a: link is not ready [ 6.742169] IPv6: ADDRCONF(NETDEV_UP): wlx24050f34376a: link is not ready [ 6.870166] IPv6: ADDRCONF(NETDEV_UP): wlx24050f34376a: link is not ready [ 16.469826] IPv6: ADDRCONF(NETDEV_UP): wlx24050f34376a: link is not ready [ 24.581703] wlx24050f34376a: authenticate with 9c:c9:eb:1b:69:14 [ 24.697044] wlx24050f34376a: send auth to 9c:c9:eb:1b:69:14 (try 1/3) [ 24.713327] wlx24050f34376a: authenticated [ 24.715344] wlx24050f34376a: associate with 9c:c9:eb:1b:69:14 (try 1/3) [ 24.720276] wlx24050f34376a: RX AssocResp from 9c:c9:eb:1b:69:14 (capab=0x31 status=0 aid=9) [ 24.733772] wlx24050f34376a: associated [ 24.837514] IPv6: ADDRCONF(NETDEV_CHANGE): wlx24050f34376a: link becomes ready [ 25.060205] FS-Cache: Loaded [ 25.063537] Key type dns_resolver registered [ 25.097940] FS-Cache: Netfs 'cifs' registered for caching [ 25.099163] Key type cifs.spnego registered [ 25.101598] Key type cifs.idmap registered [ 25.103029] No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount. [ 25.526905] broken atomic modeset userspace detected, disabling atomic [ 141.862403] pci 0000:02:00.0: enabling device (0000 -> 0003) [ 190.401437] fuse init (API version 7.27)