sandor@proto2:~$ linuxcnc /home/sandor/linuxcnc/configs/proto2/proto2.ini LINUXCNC - 2.8.0 Machine configuration directory is '/home/sandor/linuxcnc/configs/proto2' Machine configuration file is 'proto2.ini' Starting LinuxCNC... Found file(REL): ./proto2.hal Note: Using POSIX realtime config string '0 out 1 in' Found file(REL): ./custom.hal Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) vfdmod: reading 'spindle.rpm-out' from address 4096 (0x1000)... [01][03][10][00][00][01][80][CA] Waiting for a confirmation... <01><03><00><02><1D> ERROR CRC received 0x21D != CRC calculated 0x20F0 vfdmod: setting command speed value to 2500 (0x09C4)... [01][06][10][00][09][C4][8A][C9] Waiting for a confirmation... <4C><01><06> Request for slave 76 ignored (not 1) The responding slave 76 isn't the requested slave 1 vfdmod: reading 'spindle.rpm-out' from address 4096 (0x1000)... [01][03][10][00][00][01][80][CA] Waiting for a confirmation... <10><00><09><8A><01><03><00><02><09> Request for slave 16 ignored (not 1) The responding slave 16 isn't the requested slave 1 vfdmod: setting command speed value to 2500 (0x09C4)... [01][06][10][00][09][C4][8A][C9] Waiting for a confirmation... <01><06><10><00><09><8A> vfdmod: setting control word value to 6 (0x0006)... [01][06][20][00][00][06][02][08] Waiting for a confirmation... <01><06><20><00><00><06><02><08> note: MAXV max: 48.000 units/sec 2880.000 units/min note: LJOG max: 48.000 units/sec 2880.000 units/min note: LJOG default: 50.000 units/sec 3000.000 units/min note: jog_order='XYZ' note: jog_invert=set([]) vfdmod: reading 'spindle.rpm-out' from address 4096 (0x1000)... [01][03][10][00][00][01][80][CA] Waiting for a confirmation... <01><03><00><02><09> ERROR CRC received 0x209 != CRC calculated 0x20F0 vfdmod: setting command speed value to 2500 (0x09C4)... [01][06][10][00][09][C4][8A][C9] Waiting for a confirmation... ERROR Connection timed out: select vfdmod: reading 'spindle.rpm-out' from address 4096 (0x1000)... [01][03][10][00][00][01][80][CA] Waiting for a confirmation... <01><03><00><02><09> ERROR CRC received 0x209 != CRC calculated 0x20F0 vfdmod: setting command speed value to 2500 (0x09C4)... [01][06][10][00][09][C4][8A][C9] Waiting for a confirmation... <01><06> Request for slave 196 ignored (not 1) The responding slave 196 isn't the requested slave 1 vfdmod: reading 'spindle.rpm-out' from address 4096 (0x1000)... [01][03][10][00][00][01][80][CA] Waiting for a confirmation... <10><00><09><8A><01><03><00><02><09> Request for slave 16 ignored (not 1) The responding slave 16 isn't the requested slave 1 vfdmod: setting command speed value to 2500 (0x09C4)... [01][06][10][00][09][C4][8A][C9] Waiting for a confirmation... <01><06><10><00><09><8A> vfdmod: setting control word value to 6 (0x0006)... [01][06][20][00][00][06][02][08] Waiting for a confirmation... <01><06><20><00><00><06><02><08> vfdmod: reading 'spindle.rpm-out' from address 4096 (0x1000)... [01][03][10][00][00][01][80][CA] Waiting for a confirmation... <01><03><00><02><09> ERROR CRC received 0x209 != CRC calculated 0x20F0 vfdmod: setting command speed value to 2500 (0x09C4)... [01][06][10][00][09][C4][8A][C9] Waiting for a confirmation... <01><06> Request for slave 196 ignored (not 1) The responding slave 196 isn't the requested slave 1 vfdmod: reading 'spindle.rpm-out' from address 4096 (0x1000)... [01][03][10][00][00][01][80][CA] Waiting for a confirmation... <10><00><09><8A><01><03><00><02><09> Request for slave 16 ignored (not 1) The responding slave 16 isn't the requested slave 1 vfdmod: setting command speed value to 2500 (0x09C4)... [01][06][10][00][09][C4][8A][C9] Waiting for a confirmation... <01><06><10><00><09><8A> vfdmod: setting control word value to 6 (0x0006)... [01][06][20][00][00][06][02][08] Waiting for a confirmation... <01><06><20><00><00><06><02><08> vfdmod: reading 'spindle.rpm-out' from address 4096 (0x1000)... [01][03][10][00][00][01][80][CA] Waiting for a confirmation... <01><03><00><02><09> ERROR CRC received 0x209 != CRC calculated 0x20F0 vfdmod: setting command speed value to 2500 (0x09C4)... [01][06][10][00][09][C4][8A][C9] Waiting for a confirmation... ERROR Connection timed out: select vfdmod: reading 'spindle.rpm-out' from address 4096 (0x1000)... [01][03][10][00][00][01][80][CA] Waiting for a confirmation... <01><03><00><02><09> ERROR CRC received 0x209 != CRC calculated 0x20F0 vfdmod: setting command speed value to 2500 (0x09C4)... [01][06][10][00][09][C4][8A][C9] Waiting for a confirmation... <01><06> Request for slave 196 ignored (not 1) The responding slave 196 isn't the requested slave 1 vfdmod: reading 'spindle.rpm-out' from address 4096 (0x1000)... [01][03][10][00][00][01][80][CA] Waiting for a confirmation... <10><00><09><8A><01><03><00><02><09> Request for slave 16 ignored (not 1) The responding slave 16 isn't the requested slave 1 vfdmod: setting command speed value to 2500 (0x09C4)... [01][06][10][00][09][C4][8A][C9] Waiting for a confirmation... <01><06><10><00><09><8A> vfdmod: setting control word value to 6 (0x0006)... [01][06][20][00][00][06][02][08] Waiting for a confirmation... <01><06><20><00><00><06><02><08> vfdmod: reading 'spindle.rpm-out' from address 4096 (0x1000)... [01][03][10][00][00][01][80][CA] Waiting for a confirmation... <01><03><00><02><09> ERROR CRC received 0x209 != CRC calculated 0x20F0 vfdmod: setting command speed value to 2500 (0x09C4)... [01][06][10][00][09][C4][8A][C9] Waiting for a confirmation... <01><06> Request for slave 196 ignored (not 1) The responding slave 196 isn't the requested slave 1 vfdmod: reading 'spindle.rpm-out' from address 4096 (0x1000)... [01][03][10][00][00][01][80][CA] Waiting for a confirmation... <10><00><09><8A><01><03><00><02><09> Request for slave 16 ignored (not 1) The responding slave 16 isn't the requested slave 1 vfdmod: setting command speed value to 2500 (0x09C4)... [01][06][10][00][09][C4][8A][C9] Waiting for a confirmation... <01><06><10><00><09><8A> vfdmod: setting control word value to 6 (0x0006)... [01][06][20][00][00][06][02][08] Waiting for a confirmation... <01><06><20><00><00><06><02><08> vfdmod: reading 'spindle.rpm-out' from address 4096 (0x1000)... [01][03][10][00][00][01][80][CA] Waiting for a confirmation... <01><03><00><02><09> ERROR CRC received 0x209 != CRC calculated 0x20F0 vfdmod: setting command speed value to 2500 (0x09C4)... [01][06][10][00][09][C4][8A][C9] Waiting for a confirmation... ERROR Connection timed out: select vfdmod: reading 'spindle.rpm-out' from address 4096 (0x1000)... [01][03][10][00][00][01][80][CA] Waiting for a confirmation... <01><03><00><02><09> ERROR CRC received 0x209 != CRC calculated 0x20F0 vfdmod: setting command speed value to 2500 (0x09C4)... [01][06][10][00][09][C4][8A][C9] Waiting for a confirmation... <01><06> Request for slave 196 ignored (not 1) The responding slave 196 isn't the requested slave 1 vfdmod: reading 'spindle.rpm-out' from address 4096 (0x1000)... [01][03][10][00][00][01][80][CA] Waiting for a confirmation... <10><00><09><8A><01><03><00><02><09> Request for slave 16 ignored (not 1) The responding slave 16 isn't the requested slave 1 vfdmod: setting command speed value to 2500 (0x09C4)... [01][06][10][00][09][C4][8A][C9] Waiting for a confirmation... <01><06><10><00><09><8A> vfdmod: setting control word value to 6 (0x0006)... [01][06][20][00][00][06][02][08] Waiting for a confirmation... <01><06><20><00><00><06><02><08> vfdmod: reading 'spindle.rpm-out' from address 4096 (0x1000)... [01][03][10][00][00][01][80][CA] Waiting for a confirmation... <01><03><00><02><09> ERROR CRC received 0x209 != CRC calculated 0x20F0 vfdmod: setting command speed value to 2500 (0x09C4)... [01][06][10][00][09][C4][8A][C9] Waiting for a confirmation... ERROR Connection timed out: select vfdmod: reading 'spindle.rpm-out' from address 4096 (0x1000)... [01][03][10][00][00][01][80][CA] Waiting for a confirmation... <01><03><00><02><09> ERROR CRC received 0x209 != CRC calculated 0x20F0 vfdmod: setting command speed value to 2500 (0x09C4)... [01][06][10][00][09][C4][8A][C9] Waiting for a confirmation... <01><06> Request for slave 196 ignored (not 1) The responding slave 196 isn't the requested slave 1 vfdmod: reading 'spindle.rpm-out' from address 4096 (0x1000)... [01][03][10][00][00][01][80][CA] Waiting for a confirmation... <10><00><09><8A><01><03><00><02><09> Request for slave 16 ignored (not 1) The responding slave 16 isn't the requested slave 1 vfdmod: setting command speed value to 2500 (0x09C4)... [01][06][10][00][09][C4][8A][C9] Waiting for a confirmation... <01><06><10><00><09><8A> vfdmod: setting control word value to 6 (0x0006)... [01][06][20][00][00][06][02][08] Waiting for a confirmation... <01><06><20><00><00><06><02><08> vfdmod: reading 'spindle.rpm-out' from address 4096 (0x1000)... Shutting down and cleaning up LinuxCNC... [01][03][10][00][00][01][80][CA] Waiting for a confirmation... <01><03><00><02><09> ERROR CRC received 0x209 != CRC calculated 0x20F0 vfdmod: setting command speed value to 2500 (0x09C4)... [01][06][10][00][09][C4][8A][C9] Waiting for a confirmation... <01><06> Request for slave 196 ignored (not 1) The responding slave 196 isn't the requested slave 1 vfdmod: reading 'spindle.rpm-out' from address 4096 (0x1000)... [01][03][10][00][00][01][80][CA] Waiting for a confirmation... task: 704 cycles, min=0.000058, max=0.037836, avg=0.009889, 0 latency excursions (> 10x expected cycle time of 0.010000s) <10><00><09><8A><01><03><00><02><09> Request for slave 16 ignored (not 1) The responding slave 16 isn't the requested slave 1 vfdmod: setting command speed value to 2500 (0x09C4)... [01][06][10][00][09][C4][8A][C9] Waiting for a confirmation... <01><06><10><00><09><8A> vfdmod: setting control word value to 6 (0x0006)... [01][06][20][00][00][06][02][08] Waiting for a confirmation... <01><06><20><00><00><06><02><08> vfdmod: close request received. vfdmod: application closed. Note: Using POSIX realtime sandor@proto2:~$