./run
LINUXCNC - 2.8.4
Machine configuration directory is '/home/cnc/linuxcnc/configs/cnc0'
Machine configuration file is 'cnc0-inc.ini.expanded'
Starting LinuxCNC...
twopass:invoked with <> options
twopass:found ./cnc0.hal
twopass:found ./custom.hal
twopass:pass0: loadusr -W hal_manualtoolchange
Note: Using POSIX realtime
config string '0x378 out'
No parport registered at 0x378. This is not always an error. Continuing.
No parport registered at 0x378. This is not always an error. Continuing.

task: main loop took 0.012252 seconds
note: MAXV     max: 30.000 units/sec 1800.000 units/min
note: LJOG     max: 30.000 units/sec 1800.000 units/min
note: LJOG default: 20.000 units/sec 1200.000 units/min
note: jog_order='XYZ'
note: jog_invert=set([])
[QtDesigner][INFO]  Logging to "/home/cnc/qtdesigner.log" (logger.py:88)
[QtDesigner.QTVCP.QT_ISTAT][WARNING]  INI Parsing Error, No DEFAULT_ANGULAR_VELOCITY Entry in DISPLAY, Using: 6 (qt_istat.py:365)
[QtDesigner.QTVCP.QT_ISTAT][WARNING]  INI Parsing Error, No MIN_ANGULAR_VELOCITY Entry in DISPLAY, Using: 1 (qt_istat.py:365)
[QtDesigner.QTVCP.QT_ISTAT][WARNING]  INI Parsing Error, No MAX_ANGULAR_VELOCITY Entry in DISPLAY, Using: 60 (qt_istat.py:365)
[QtDesigner.QTVCP.QT_ISTAT][WARNING]  INI Parsing Error, No DEFAULT_SPINDLE_0_SPEED Entry in DISPLAY, Using: 200 (qt_istat.py:365)
[QtDesigner.QTVCP.QT_ISTAT][WARNING]  INI Parsing Error, No MIN_SPINDLE_0_SPEED Entry in DISPLAY, Using: 100 (qt_istat.py:365)
[QtDesigner.QTVCP.QT_ISTAT][WARNING]  INI Parsing Error, No MAX_SPINDLE_0_SPEED Entry in DISPLAY, Using: 2500 (qt_istat.py:365)
[QtDesigner.QTVCP.QT_ISTAT][WARNING]  INI Parsing Error, No MAX_SPINDLE_0_OVERRIDE Entry in DISPLAY, Using: 1 (qt_istat.py:365)
[QtDesigner.QTVCP.QT_ISTAT][WARNING]  INI Parsing Error, No MIN_SPINDLE_0_OVERRIDE Entry in DISPLAY, Using: 0.5 (qt_istat.py:365)
[QtDesigner.QTVCP.QT_ISTAT][WARNING]  Embeded tab configuration -invalaid number of TAB_NAMES vrs TAB_LOCATION - guessng default. (qt_istat.py:340)
[QTvcp][INFO]  Logging to "/home/cnc/qtvcp.log" (logger.py:88)
Usage: qtvcp [options] myfile.ui

qtvcp: error: no such option: -U
<commandline>:0: waitpid failed qtvcp qtvcp_embed
<commandline>:0: qtvcp exited without becoming ready
Embeded tab command "halcmd loadusr -Wn qtvcp_embed qtvcp -d -c qtvcp_embed -x 83886375 -U size=800,600 cam_align" exited with error: 1
Shutting down and cleaning up LinuxCNC...
task: 878 cycles, min=0.000027, max=0.012252, avg=0.001088, 1 latency excursions (> 10x expected cycle time of 0.001000s)
Note: Using POSIX realtime
LinuxCNC terminated with an error.  You can find more information in the log:
    /home/cnc/linuxcnc_debug.txt
and
    /home/cnc/linuxcnc_print.txt
as well as in the output of the shell command 'dmesg' and in the terminal