~/linuxcnc/configs/sim$ ./run LINUXCNC - 2.8.4 Machine configuration directory is '/home/cnc/linuxcnc/configs/sim' Machine configuration file is 'qtvcp_tab.ini' Starting LinuxCNC... emc/iotask/ioControl.cc 702: can't load tool table. twopass:invoked with <> options twopass:found /usr/share/linuxcnc/hallib/basic_sim.tcl setup_kins: cmd=loadrt trivkins twopass:pass0: loadusr -W hal_manualtoolchange Note: Using POSIX realtime setup_kins: cmd=loadrt trivkins task: main loop took 0.016455 seconds task: main loop took 0.011903 seconds note: MAXV max: 1.200 units/sec 72.000 units/min note: LJOG max: 1.200 units/sec 72.000 units/min note: LJOG default: 0.250 units/sec 15.000 units/min note: jog_order='XYZ' note: jog_invert=set([]) [QtDesigner][INFO] Logging to "/home/cnc/qtdesigner.log" (logger.py:88) [QtDesigner.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MIN_LINEAR_VELOCITY Entry in DISPLAY, Using: 1 (qt_istat.py:365) [QtDesigner.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No DEFAULT_ANGULAR_VELOCITY Entry in DISPLAY, Using: 6 (qt_istat.py:365) [QtDesigner.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MIN_ANGULAR_VELOCITY Entry in DISPLAY, Using: 1 (qt_istat.py:365) [QtDesigner.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MAX_ANGULAR_VELOCITY Entry in DISPLAY, Using: 60 (qt_istat.py:365) [QtDesigner.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No DEFAULT_SPINDLE_0_SPEED Entry in DISPLAY, Using: 200 (qt_istat.py:365) [QtDesigner.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MIN_SPINDLE_0_SPEED Entry in DISPLAY, Using: 100 (qt_istat.py:365) [QtDesigner.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MAX_SPINDLE_0_SPEED Entry in DISPLAY, Using: 2500 (qt_istat.py:365) [QtDesigner.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MAX_SPINDLE_0_OVERRIDE Entry in DISPLAY, Using: 1 (qt_istat.py:365) [QtDesigner.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MIN_SPINDLE_0_OVERRIDE Entry in DISPLAY, Using: 0.5 (qt_istat.py:365) [QtDesigner.QTVCP.QT_ISTAT][WARNING] Embeded tab configuration -invalaid number of TAB_NAMES vrs TAB_LOCATION - guessng default. (qt_istat.py:340) [QTvcp][INFO] Logging to "/home/cnc/qtvcp.log" (logger.py:88) Waiting for component 'qtvcp_embed' to become ready..............................................................task: main loop took 0.025491 seconds ..........................................................................................................................................................................[QTvcp.QTVCP.LIB.SYS_NOTIFY][WARNING] Descktop Notify not availale:: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. (sys_notify.py:67) .[QtDesigner.QTVCP.QT_PSTAT][DEBUG] BASENAME cam_align (qt_pstat.py:58) [QtDesigner.QTVCP.QT_PSTAT][DEBUG] Checking for handler file in: /home/cnc/linuxcnc/configs/sim/cam_align_handler.py (qt_pstat.py:78) [QtDesigner.QTVCP.QT_PSTAT][DEBUG] Checking for default handler file in: /usr/share/qtvcp/panels/cam_align/cam_align_handler.py (qt_pstat.py:84) [QtDesigner.QTVCP.QT_PSTAT][INFO] Using DEFAULT handler file path: /usr/share/qtvcp/panels/cam_align/cam_align_handler.py (qt_pstat.py:87) [QtDesigner.QTVCP.QT_PSTAT][DEBUG] Checking for .ui in: /home/cnc/linuxcnc/configs/sim/cam_align.ui (qt_pstat.py:104) [QtDesigner.QTVCP.QT_PSTAT][DEBUG] Checking for .ui in: /usr/share/qtvcp/panels/cam_align/cam_align.ui (qt_pstat.py:109) [QtDesigner.QTVCP.QT_PSTAT][INFO] Using DEFAULT ui file from /usr/share/qtvcp/panels/cam_align/cam_align.ui (qt_pstat.py:111) [QtDesigner.QTVCP.QT_PSTAT][DEBUG] Checking for .qss in: /home/cnc/linuxcnc/configs/sim/cam_align.qss (qt_pstat.py:144) [QtDesigner.QTVCP.QT_PSTAT][DEBUG] Checking for .qss in: /usr/share/qtvcp/panels/cam_align/cam_align.qss (qt_pstat.py:149) [QtDesigner.QTVCP.QT_PSTAT][INFO] No qss file found (qt_pstat.py:155) [QtDesigner.QTVCP.QT_PSTAT][DEBUG] Checking for .qrc in: /home/cnc/linuxcnc/configs/sim/cam_align.qrc (qt_pstat.py:170) [QtDesigner.QTVCP.QT_PSTAT][DEBUG] Checking for .qrc in: /usr/share/qtvcp/panels/cam_align/cam_align.qrc (qt_pstat.py:176) [QtDesigner.QTVCP.QT_PSTAT][INFO] No qrc file found (qt_pstat.py:183) [QtDesigner.QTVCP.QT_PSTAT][DEBUG] Checking for resources.py in: /home/cnc/linuxcnc/configs/sim/resources.py (qt_pstat.py:199) [QtDesigner.QTVCP.QT_PSTAT][DEBUG] Checking for resources.py in: /usr/share/qtvcp/panels/cam_align/resources.py (qt_pstat.py:210) [QtDesigner.QTVCP.QT_PSTAT][INFO] No resources.py file found, No QRC file to compile one from. (qt_pstat.py:222) [QTvcp][INFO] Building A VCP Panel (qtvcp:162) [QTvcp][INFO] No handler file specified - using /usr/share/qtvcp/panels/cam_align/cam_align_handler.py (qtvcp:165) [QTvcp][DEBUG] Loading the handler file (qtvcp:200) [QTvcp][DEBUG] Adding the key events filter (qtvcp:206) [QTvcp.QTVCP.QT_MAKEGUI][INFO] No resource file to load: None (qt_makegui.py:173) ...........[QTvcp][DEBUG] Calling the handler file's initialized__ function (qtvcp:219) [QtDesigner.QTVCP.QT_TSTAT][DEBUG] Toolfile does not exist' sim.tbl (qt_tstat.py:113) [QTvcp][DEBUG] Set HAL ready (qtvcp:236) [QTvcp][CRITICAL] Forwarding events to AXIS is not well tested yet (qtvcp:243) [QTvcp][DEBUG] Show window (qtvcp:296) [QTvcp.QTVCP.QT_MAKEPINS][INFO] No preference file - can not set preference geometry. (qt_makepins.py:106) mux2: already exists mux2: already exists rumblepad.hal:111: waitpid failed /usr/bin/rtapi_app mux2 rumblepad.hal:111: /usr/bin/rtapi_app exited without becoming ready rumblepad.hal:111: insmod for mux2 failed, returned -1 TCL error in asynchronous code: while executing "140563265310144check_dynamic_tabs" ("after" script) Shutting down and cleaning up LinuxCNC... [QTvcp][INFO] Preference path: None (qtvcp:317) task: 26708 cycles, min=0.000042, max=0.025491, avg=0.001076, 3 latency excursions (> 10x expected cycle time of 0.001000s) Note: Using POSIX realtime LinuxCNC terminated with an error. You can find more information in the log: /home/cnc/linuxcnc_debug.txt and /home/cnc/linuxcnc_print.txt as well as in the output of the shell command 'dmesg' and in the terminal cnc@cnc0:~/linuxcnc/configs/sim$ dmesg dmesg: read kernel buffer failed: Die Operation ist nicht erlaubt