LINUXCNC - 2.9.0~pre0
Machine configuration directory is '/home/pi/linuxcnc-master/configs/sim/axis/gladevcp'
Machine configuration file is 'gladevcp_panel.ini'
Starting LinuxCNC...
linuxcnc TPMOD=tpmod HOMEMOD=homemod EMCMOT=motmod
Note: Using POSIX realtime
Found file(LIB): /home/pi/linuxcnc-master/lib/hallib/basic_sim.tcl
setup_kins: cmd=loadrt trivkins
note: MAXV     max: 1.200 units/sec 72.000 units/min
note: LJOG     max: 1.200 units/sec 72.000 units/min
note: LJOG default: 0.250 units/sec 15.000 units/min
note: jog_order='XYZ'
note: jog_invert=set()
task: main loop took 0.010170 seconds
['halcmd', 'loadusr', '-Wn', 'gladevcp', 'gladevcp', '-c', 'gladevcp', '-d', '-x', '44040335', '-u', 'hitcounter.py', 'manual-example.ui']
[GladeVCP][INFO]  Logging to: /home/pi/gladevcp.log (logger.py:107)
[GladeVCP.QTVCP.QT_ISTAT][WARNING]  INI Parsing Error, No MIN_LINEAR_VELOCITY Entry in DISPLAY, Using: 1 (qt_istat.py:476)
[GladeVCP.QTVCP.QT_ISTAT][WARNING]  INI Parsing Error, No DEFAULT_SPINDLE_0_SPEED Entry in DISPLAY, Using: 200 (qt_istat.py:476)
[GladeVCP.QTVCP.QT_ISTAT][WARNING]  INI Parsing Error, No MIN_SPINDLE_0_SPEED Entry in DISPLAY, Using: 100 (qt_istat.py:476)
[GladeVCP.QTVCP.QT_ISTAT][WARNING]  INI Parsing Error, No MAX_SPINDLE_0_SPEED Entry in DISPLAY, Using: 2500 (qt_istat.py:476)
[GladeVCP.QTVCP.QT_ISTAT][WARNING]  INI Parsing Error, No MAX_SPINDLE_0_OVERRIDE Entry in DISPLAY, Using: 1 (qt_istat.py:476)
[GladeVCP.QTVCP.QT_ISTAT][WARNING]  INI Parsing Error, No MIN_SPINDLE_0_OVERRIDE Entry in DISPLAY, Using: 0.5 (qt_istat.py:476)
Traceback (most recent call last):
  File "/home/pi/linuxcnc-master/bin/gladevcp", line 54, in <module>
    import gladevcp.makepins
  File "/home/pi/linuxcnc-master/lib/python/gladevcp/__init__.py", line 1, in <module>
    from .hal_pythonplugin import *
  File "/home/pi/linuxcnc-master/lib/python/gladevcp/hal_pythonplugin.py", line 42, in <module>
    from .hal_sourceview import *
  File "/home/pi/linuxcnc-master/lib/python/gladevcp/hal_sourceview.py", line 28, in <module>
    gi.require_version("GtkSource","3.0")
  File "/usr/lib/python3/dist-packages/gi/__init__.py", line 126, in require_version
    raise ValueError('Namespace %s not available' % namespace)
ValueError: Namespace GtkSource not available
<commandline>:0: waitpid failed gladevcp gladevcp