Error report created by /usr/lib/tcltk/linuxcnc/show_errors.tcl: Print file information: RUN_IN_PLACE=no LINUXCNC_DIR= LINUXCNC_BIN_DIR=/usr/bin LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc LINUXCNC_SCRIPT_DIR= LINUXCNC_RTLIB_DIR=/usr/lib/linuxcnc/modules LINUXCNC_CONFIG_DIR= LINUXCNC_LANG_DIR=/usr/lib/tcltk/linuxcnc/msgs INIVAR=inivar HALCMD=halcmd LINUXCNC_EMCSH=/usr/bin/wish8.6 LINUXCNC - 2.9.0~pre0 Machine configuration directory is '/home/doug/linuxcnc/configs/LR3_LinuxCNC_Base_Config' Machine configuration file is 'LR3_LinuxCNC_Base_Config.ini' INIFILE=/home/doug/linuxcnc/configs/LR3_LinuxCNC_Base_Config/LR3_LinuxCNC_Base_Config.ini VERSION=1.1 PARAMETER_FILE=linuxcnc.var TPMOD= HOMEMOD= TASK=milltask HALUI=halui DISPLAY=axis COORDINATES=XYYZZ KINEMATICS=trivkins coordinates=XYYZZ kinstype=BOTH Starting LinuxCNC... Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Starting LinuxCNC IO program: io Starting HAL User Interface program: halui linuxcnc TPMOD=tpmod HOMEMOD=homemod EMCMOT=motmod Found file(REL): ./LR3_LinuxCNC_Base_Config.hal Shutting down and cleaning up LinuxCNC... Running HAL shutdown script identityKinematicsSetup: coordinates:XYYZZ Joint 0 ==> Axis X Joint 1 ==> Axis Y Joint 2 ==> Axis Y Joint 3 ==> Axis Z Joint 4 ==> Axis Z hm2: loading Mesa HostMot2 driver version 0.15 hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.2 hm2_eth: 10.10.10.10: INFO: Hardware address (MAC): 00:60:1b:16:81:00 hm2_eth: Unrecognized ethernet board found: 7I96S -- port names will be wrong hm2_eth: discovered 7I96S hm2/hm2_7i96.0: Low Level init 0.15 hm2/hm2_7i96.0: Smart Serial Firmware Version 43 hm2/hm2_7i96.0: 51 I/O Pins used: hm2/hm2_7i96.0: IO Pin 000 (??-01): InM Input Module #0, pin in0 (Input) hm2/hm2_7i96.0: IO Pin 001 (??-14): InM Input Module #0, pin in1 (Input) hm2/hm2_7i96.0: IO Pin 002 (??-02): InM Input Module #0, pin in2 (Input) hm2/hm2_7i96.0: IO Pin 003 (??-15): InM Input Module #0, pin in3 (Input) hm2/hm2_7i96.0: IO Pin 004 (??-03): InM Input Module #0, pin in4 (Input) hm2/hm2_7i96.0: IO Pin 005 (??-16): InM Input Module #0, pin in5 (Input) hm2/hm2_7i96.0: IO Pin 006 (??-04): InM Input Module #0, pin in6 (Input) hm2/hm2_7i96.0: IO Pin 007 (??-17): InM Input Module #0, pin in7 (Input) hm2/hm2_7i96.0: IO Pin 008 (??-05): InM Input Module #0, pin in8 (Input) hm2/hm2_7i96.0: IO Pin 009 (??-06): InM Input Module #0, pin in9 (Input) hm2/hm2_7i96.0: IO Pin 010 (??-07): InM Input Module #0, pin in10 (Input) hm2/hm2_7i96.0: IO Pin 011 (??-08): SSR #0, pin Out-00 (Output) hm2/hm2_7i96.0: IO Pin 012 (??-09): SSR #0, pin Out-01 (Output) hm2/hm2_7i96.0: IO Pin 013 (??-10): SSR #0, pin Out-02 (Output) hm2/hm2_7i96.0: IO Pin 014 (??-11): SSR #0, pin Out-03 (Output) hm2/hm2_7i96.0: IO Pin 015 (??-12): OutM Output Module #0, pin Out-04 (Output) hm2/hm2_7i96.0: IO Pin 016 (??-13): OutM Output Module #0, pin Out-05 (Output) hm2/hm2_7i96.0: IO Pin 017 (??-01): StepGen #0, pin Step (Output) hm2/hm2_7i96.0: IO Pin 018 (??-14): StepGen #0, pin Direction (Output) hm2/hm2_7i96.0: IO Pin 019 (??-02): StepGen #1, pin Step (Output) hm2/hm2_7i96.0: IO Pin 020 (??-15): StepGen #1, pin Direction (Output) hm2/hm2_7i96.0: IO Pin 021 (??-03): StepGen #2, pin Step (Output) hm2/hm2_7i96.0: IO Pin 022 (??-16): StepGen #2, pin Direction (Output) hm2/hm2_7i96.0: IO Pin 023 (??-04): StepGen #3, pin Step (Output) hm2/hm2_7i96.0: IO Pin 024 (??-17): StepGen #3, pin Direction (Output) hm2/hm2_7i96.0: IO Pin 025 (??-05): StepGen #4, pin Step (Output) hm2/hm2_7i96.0: IO Pin 026 (??-06): StepGen #4, pin Direction (Output) hm2/hm2_7i96.0: IO Pin 027 (??-07): Encoder #0, pin A (Input) hm2/hm2_7i96.0: IO Pin 028 (??-08): Encoder #0, pin B (Input) hm2/hm2_7i96.0: IO Pin 029 (??-09): Encoder #0, pin Index (Input) hm2/hm2_7i96.0: IO Pin 030 (??-10): IOPort hm2/hm2_7i96.0: IO Pin 031 (??-11): IOPort hm2/hm2_7i96.0: IO Pin 032 (??-12): IOPort hm2/hm2_7i96.0: IO Pin 033 (??-13): SSR #0, pin AC Ref (internal) (Output) hm2/hm2_7i96.0: IO Pin 034 (??-01): IOPort hm2/hm2_7i96.0: IO Pin 035 (??-14): IOPort hm2/hm2_7i96.0: IO Pin 036 (??-02): IOPort hm2/hm2_7i96.0: IO Pin 037 (??-15): IOPort hm2/hm2_7i96.0: IO Pin 038 (??-03): IOPort hm2/hm2_7i96.0: IO Pin 039 (??-16): IOPort hm2/hm2_7i96.0: IO Pin 040 (??-04): IOPort hm2/hm2_7i96.0: IO Pin 041 (??-17): IOPort hm2/hm2_7i96.0: IO Pin 042 (??-05): IOPort hm2/hm2_7i96.0: IO Pin 043 (??-06): IOPort hm2/hm2_7i96.0: IO Pin 044 (??-07): IOPort hm2/hm2_7i96.0: IO Pin 045 (??-08): IOPort hm2/hm2_7i96.0: IO Pin 046 (??-09): IOPort hm2/hm2_7i96.0: IO Pin 047 (??-10): IOPort hm2/hm2_7i96.0: IO Pin 048 (??-11): IOPort hm2/hm2_7i96.0: IO Pin 049 (??-12): IOPort hm2/hm2_7i96.0: IO Pin 050 (??-13): IOPort hm2/hm2_7i96.0: registered hm2_eth: in hm2_eth_reset hm2_eth: HostMot2 ethernet driver unloaded hm2: unloading Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments Debug file information: Note: Using POSIX realtime ./LR3_LinuxCNC_Base_Config.hal:10: parameter or pin 'hm2_7i96s.0.watchdog.timeout_ns' not found 108524 Stopping realtime threads Unloading hal components Note: Using POSIX realtime ----------------------------------------------------------------------- Info report created by linuxcnc_info: The file: /tmp/linuxcnc_info.txt can be posted to a forum or a web site like: http://pastebin.com in order to provide information about the linuxcnc system and configuration. Date: Fri Dec 30 10:01:12 PM EST 2022 UTC Date: Sat Dec 31 03:01:12 AM UTC 2022 this program: /usr/bin/linuxcnc_info uptime: 22:01:12 up 14:36, 1 user, load average: 4.31, 2.40, 1.96 lsb_release -sa: Linuxmint Linux Mint 21 21 vanessa linuxcnc: /usr/bin/linuxcnc pwd: /home/doug/linuxcnc/configs/LR3_LinuxCNC_Base_Config USER: doug LOGNAME: doug HOME: /home/doug EDITOR: VISUAL: LANGUAGE: en_US TERM: dumb COLORTERM: DISPLAY: :0 DESKTOP: mate display size: 1366x768 pixels (361x203 millimeters) PATH: /usr/bin:/home/doug/linuxcnc/configs/LR3_LinuxCNC_Base_Config/bin:/usr/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin uname items: nodename -n: doug-Aspire-V3-572P kernel-name -s: Linux kernel-vers -v: #1 SMP PREEMPT_RT Debian 5.18.5-1 (2022-06-16) machine -m: x86_64 processor -p: x86_64 platform -i: x86_64 oper system -o: GNU/Linux /proc items: cmdline: BOOT_IMAGE=/boot/vmlinuz-5.18.0-2-rt-amd64 root=UUID=9399c7c0-9946-4d30-9c91-333c2cbe9fd5 ro quiet splash model name: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz cores: 2 cpu MHz: 2389.899 parport: serial: Versions: gcc: gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0 python: Python 3.10.6 git: not_in_PATH git commit: NA tcl: 8.6 tk: 8.6 glade: not_in_PATH linuxcnc_var all: LINUXCNCVERSION: 2.9.0~pre0 LINUXCNC_AUX_GLADEVCP: /usr/share/linuxcnc/aux_gladevcp LINUXCNC_AUX_EXAMPLES: /usr/share/linuxcnc/aux_examples REALTIME: /usr/lib/linuxcnc/realtime RTS: uspace HALLIB_DIR: /usr/share/linuxcnc/hallib PYTHON: /usr/bin/python3 dpkg -l '*linuxcnc*': Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Architecture Description +++-===============-===================================-============-============================================= un linuxcnc (no description available) un linuxcnc-doc (no description available) un linuxcnc-doc-en (no description available) un linuxcnc-sim (no description available) ii linuxcnc-uspace 2.9.0~pre0+git20220402.2500863908-4 amd64 motion controller for CNC machines and robots