#<_generalheight>= 3             ( CHANGING THESE GENERAL # WILL CHANGE THE VALUES IN ALL PROGRAMS LISTED BELOW )
#<_generalspeed>=  400                          
#<_generalspace>=  .25






/o<1_2hlrect201>            call
/o<1_2hlrect202>            call
/o<1_2hlrect203>            call
/o<1_2hlrect204>            call
/o<1_2hlrect205>            call
/o<1_2hlrect206>            call


o<1_2hlrect_2_1hlrect_101>  call
o<1_2hlrect_2_1hlrect_102>  call
o<1_2hlrect_2_1hlrect_103>  call
o<1_2hlrect_2_1hlrect_104>  call





/o<1_singlehlrect1>      call
/o<1_singlehlrect2>      call                 ( THIS GROUP WILL MAKE 1 RECTANGLE WITH 1 CHASE HOLE CENTERED IN EACH )
/o<1_singlehlrect3>      call
/o<1_singlehlrect4>      call




 
/o<2_singlehlrect401>        call
/o<2_singlehlrect402>        call             ( THIS GROUP WILL MAKE 2 RECTANGLES WITH 1 CHASE HOLE CENTERED IN EACH )
/o<2_singlehlrect403>        call
/o<2_singlehlrect404>        call


/o<3_singlehlrect501>        call
/o<3_singlehlrect502>        call
/o<3_singlehlrect503>        call              ( THIS GROUP WILL MAKE 3 RECTANGLES WITH 1 CHASE HOLE CENTERED IN EACH )
/o<3_singlehlrect504>        call
/o<3_singlehlrect505>        call
/o<3_singlehlrect506>        call




/o<111>   call

/o1221    call
  

	          
m2