Error report created by /usr/lib/tcltk/linuxcnc/show_errors.tcl: Print file information: RUN_IN_PLACE=no LINUXCNC_DIR= LINUXCNC_BIN_DIR=/usr/bin LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc LINUXCNC_SCRIPT_DIR= LINUXCNC_RTLIB_DIR=/usr/lib/linuxcnc/modules LINUXCNC_CONFIG_DIR= LINUXCNC_LANG_DIR=/usr/lib/tcltk/linuxcnc/msgs INIVAR=inivar HALCMD=halcmd LINUXCNC_EMCSH=/usr/bin/wish8.6 LINUXCNC - 2.9.0~pre0+git20221105.ffb6bda926 Machine configuration directory is '/home/riveter/linuxcnc/configs/Riveter' Machine configuration file is 'Riveter.ini' INIFILE=/home/riveter/linuxcnc/configs/Riveter/Riveter.ini VERSION=1.1 PARAMETER_FILE=linuxcnc.var TPMOD= HOMEMOD= TASK=milltask HALUI=halui DISPLAY=qtvcp qtdragon -d COORDINATES=XYZ KINEMATICS=trivkins coordinates=XYZ Starting LinuxCNC... Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Starting LinuxCNC IO program: io Starting HAL User Interface program: halui linuxcnc TPMOD=tpmod HOMEMOD=homemod EMCMOT=motmod Found file(REL): ./Riveter.hal Found file(REL): ./custom.hal Starting TASK program: milltask Starting DISPLAY program: qtvcp hm2/hm2_7i92.0: Smart Serial port 0: DoIt not cleared from previous servo thread. Servo thread rate probably too fast. This message will not be repeated, but the hm2_7i92.0.sserial.0.fault-count pin will indicate if this is happening frequently. Shutting down and cleaning up LinuxCNC... Running HAL shutdown script task: 81625 cycles, min=0.000007, max=0.010261, avg=0.010119, 0 latency excursions (> 10x expected cycle time of 0.010000s) INFO CLASSICLADDER---I/O Modbus master closed! INFO CLASSICLADDER---I/O Modbus master (Ethernet) init ok ! ERROR CLASSICLADDER- Error initializing classicladder user module. hm2: loading Mesa HostMot2 driver version 0.15 hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.2 hm2_eth: 192.168.1.121: INFO: Hardware address (MAC): 00:60:1b:12:08:16 hm2_eth: discovered 7I92 hm2/hm2_7i92.0: Low Level init 0.15 hm2/hm2_7i92.0: Smart Serial Firmware Version 43 Board hm2_7i92.0.7i77.0.0 Hardware Mode 0 = standard Board hm2_7i92.0.7i77.0.0 Software Mode 0 = input_output Board hm2_7i92.0.7i77.0.0 Software Mode 1 = io_analog Board hm2_7i92.0.7i77.0.0 Software Mode 2 = io_analog_fieldvoltage Board hm2_7i92.0.7i77.0.0 Software Mode 3 = io_encoder_analog_fieldvoltage Board hm2_7i92.0.7i77.0.1 Hardware Mode 0 = standard Board hm2_7i92.0.7i77.0.1 Software Mode 0 = analogout_enables hm2/hm2_7i92.0: 34 I/O Pins used: hm2/hm2_7i92.0: IO Pin 000 (P2-01): IOPort hm2/hm2_7i92.0: IO Pin 001 (P2-14): IOPort hm2/hm2_7i92.0: IO Pin 002 (P2-02): IOPort hm2/hm2_7i92.0: IO Pin 003 (P2-15): Smart Serial Interface #0, pin tx1 (Output) hm2/hm2_7i92.0: IO Pin 004 (P2-03): Smart Serial Interface #0, pin rx1 (Input) hm2/hm2_7i92.0: IO Pin 005 (P2-16): Smart Serial Interface #0, pin tx0 (Output) hm2/hm2_7i92.0: IO Pin 006 (P2-04): Smart Serial Interface #0, pin rx0 (Input) hm2/hm2_7i92.0: IO Pin 007 (P2-17): Muxed Encoder Select #0, pin Mux Select 0 (Output) hm2/hm2_7i92.0: IO Pin 008 (P2-05): Muxed Encoder #0, pin Muxed A (Input) hm2/hm2_7i92.0: IO Pin 009 (P2-06): Muxed Encoder #0, pin Muxed B (Input) hm2/hm2_7i92.0: IO Pin 010 (P2-07): Muxed Encoder #0, pin Muxed Index (Input) hm2/hm2_7i92.0: IO Pin 011 (P2-08): Muxed Encoder #1, pin Muxed A (Input) hm2/hm2_7i92.0: IO Pin 012 (P2-09): Muxed Encoder #1, pin Muxed B (Input) hm2/hm2_7i92.0: IO Pin 013 (P2-10): Muxed Encoder #1, pin Muxed Index (Input) hm2/hm2_7i92.0: IO Pin 014 (P2-11): IOPort hm2/hm2_7i92.0: IO Pin 015 (P2-12): IOPort hm2/hm2_7i92.0: IO Pin 016 (P2-13): IOPort hm2/hm2_7i92.0: IO Pin 017 (P1-01): IOPort hm2/hm2_7i92.0: IO Pin 018 (P1-14): IOPort hm2/hm2_7i92.0: IO Pin 019 (P1-02): IOPort hm2/hm2_7i92.0: IO Pin 020 (P1-15): IOPort hm2/hm2_7i92.0: IO Pin 021 (P1-03): IOPort hm2/hm2_7i92.0: IO Pin 022 (P1-16): IOPort hm2/hm2_7i92.0: IO Pin 023 (P1-04): IOPort hm2/hm2_7i92.0: IO Pin 024 (P1-17): IOPort hm2/hm2_7i92.0: IO Pin 025 (P1-05): IOPort hm2/hm2_7i92.0: IO Pin 026 (P1-06): IOPort hm2/hm2_7i92.0: IO Pin 027 (P1-07): IOPort hm2/hm2_7i92.0: IO Pin 028 (P1-08): IOPort hm2/hm2_7i92.0: IO Pin 029 (P1-09): IOPort hm2/hm2_7i92.0: IO Pin 030 (P1-10): IOPort hm2/hm2_7i92.0: IO Pin 031 (P1-11): IOPort hm2/hm2_7i92.0: IO Pin 032 (P1-12): IOPort hm2/hm2_7i92.0: IO Pin 033 (P1-13): IOPort hm2/hm2_7i92.0: registered creating ladder-state hm2_eth: in hm2_eth_reset hm2_eth: HostMot2 ethernet driver unloaded hm2: unloading Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments Debug file information: Note: Using POSIX non-realtime [QTvcp.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No DEFAULT_SPINDLE_0_SPEED Entry in DISPLAY, Using: 200 (qt_istat.py:477) [QTvcp.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MIN_SPINDLE_0_SPEED Entry in DISPLAY, Using: 100 (qt_istat.py:477) [QTvcp.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MAX_SPINDLE_0_SPEED Entry in DISPLAY, Using: 2500 (qt_istat.py:477) [QTvcp.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MAX_SPINDLE_0_OVERRIDE Entry in DISPLAY, Using: 1 (qt_istat.py:477) [QTvcp.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MIN_SPINDLE_0_OVERRIDE Entry in DISPLAY, Using: 0.5 (qt_istat.py:477) [QTvcp.QTVCP.LIB.QT_PDF.PDFVIEWER][WARNING] PDFViwer - Is python3-poppler-qt5 installed? (PDFViewer.py:15) [QTvcp.QTVCP.WIDGETS.STATUS_LABEL][WARNING] lbl_maxv_percent : no option recognised (status_label.py:158) [QTvcp.QTVCP.WIDGETS.STATUS_LABEL][WARNING] lbl_max_rapid : no option recognised (status_label.py:158) [QTvcp.QTVCP.WIDGETS.STATUS_LABEL][WARNING] lbl_runtime : no option recognised (status_label.py:158) [QTvcp.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No USE_PROBE Entry in PROBE, Using: none (qt_istat.py:477) [QTvcp.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No DEFAULT_SPINDLE_0_SPEED Entry in DISPLAY, Using: 500 (qt_istat.py:477) [QTvcp.QTVCP.LIB.QT_NGCGUI.NGCGUI][DEBUG] UI Filename: /usr/lib/python3/dist-packages/qtvcp/lib/qt_ngcgui/ngcgui.ui (ngcgui.py:458) [QTvcp.QTVCP.LIB.QT_NGCGUI.NGCGUI][DEBUG] UI Filename: /usr/lib/python3/dist-packages/qtvcp/lib/qt_ngcgui/ngcgui.ui Didn't find a path NGCGUI files (ngcgui.py:485) Could not create pixmap from :/images/images/qtdragon/images/brushed_metal.png Could not create pixmap from :/images/images/qtdragon/images/brushed_metal.png Could not create pixmap from :/images/images/qtdragon/images/brushed_metal.png hm2/hm2_7i92.0: Smart Serial port 0: DoIt not cleared from previous servo thread. Servo thread rate probably too fast. This message will not be repeated, but the hm2_7i92.0.sserial.0.fault-count pin will indicate if this is happening frequently. [QTvcp][CRITICAL] Aborted from Error Dialog Qtvcp encountered an error. The following information may be useful in troubleshooting: LinuxCNC Version : 2.9.0~pre0+git20221105.ffb6bda926 Traceback (most recent call last): File "/usr/lib/python3/dist-packages/OpenGL/latebind.py", line 43, in __call__ return self._finalCall( *args, **named ) TypeError: 'NoneType' object is not callable During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/qt5_graphics.py", line 760, in initializeGL self.realize() File "/usr/lib/python3/dist-packages/qt5_graphics.py", line 523, in realize self.font_base, width, linespace = glnav.use_pango_font(self._font, 0, 128) File "/usr/lib/python3/dist-packages/glnav.py", line 65, in use_pango_font glBitmap(0, 0, 0, 0, 0, h-d, ''.encode()) File "/usr/lib/python3/dist-packages/OpenGL/latebind.py", line 47, in __call__ return self._finalCall( *args, **named ) File "/usr/lib/python3/dist-packages/OpenGL/wrapper.py", line 700, in wrapperCall raise err File "/usr/lib/python3/dist-packages/OpenGL/wrapper.py", line 693, in wrapperCall result = wrappedOperation( *cArguments ) File "/usr/lib/python3/dist-packages/OpenGL/platform/baseplatform.py", line 415, in __call__ return self( *args, **named ) File "/usr/lib/python3/dist-packages/OpenGL/error.py", line 230, in glCheckError raise self._errorClass( OpenGL.error.GLError: GLError( err = 1285, description = b'out of memory', baseOperation = glBitmap, pyArgs = (0, 0, 0, 0, 0, 20.0, b''), cArgs = (0, 0, 0, 0, 0, 20.0, b''), cArguments = (0, 0, 0, 0, 0, 20.0, b'') ) (qtvcp:503) qtvcp_postgui.hal:3: Pin 'hal_manualtoolchange.change' does not exist 5007 5059 Stopping realtime threads Unloading hal components Note: Using POSIX non-realtime ----------------------------------------------------------------------- Info report created by linuxcnc_info: The file: /tmp/linuxcnc_info.txt can be posted to a forum or a web site like: http://pastebin.com in order to provide information about the linuxcnc system and configuration. Date: Tue Jan 17 12:49:04 PM CST 2023 UTC Date: Tue Jan 17 06:49:04 PM UTC 2023 this program: /usr/bin/linuxcnc_info uptime: 12:49:04 up 3:12, 1 user, load average: 0.02, 0.16, 0.23 lsb_release -sa: Debian Debian GNU/Linux bookworm/sid n/a bookworm linuxcnc: /usr/bin/linuxcnc pwd: /home/riveter/linuxcnc/configs/Riveter USER: riveter LOGNAME: riveter HOME: /home/riveter EDITOR: VISUAL: LANGUAGE: TERM: dumb COLORTERM: DISPLAY: :0.0 DESKTOP: lightdm-xsession display size: 1366x768 pixels (361x203 millimeters) PATH: /usr/bin:/home/riveter/linuxcnc/configs/Riveter/bin:/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games uname items: nodename -n: Riveter kernel-name -s: Linux kernel-vers -v: #1 SMP PREEMPT_DYNAMIC Debian 6.0.12-1 (2022-12-09) machine -m: x86_64 processor -p: unknown platform -i: unknown oper system -o: GNU/Linux /proc items: cmdline: BOOT_IMAGE=/boot/vmlinuz-6.0.0-6-amd64 root=UUID=f790e651-d283-4f84-abc8-7d65801cb140 ro quiet model name: 11th Gen Intel(R) Core(TM) i5-11400 @ 2.60GHz cores: 6 cpu MHz: 801.124 parport: serial: 0000-0000 : serial Versions: gcc: gcc (Debian 12.2.0-13) 12.2.0 python: Python 3.10.9 git: git version 2.39.0 git commit: NA tcl: 8.6 tk: 8.6 glade: not_in_PATH linuxcnc_var all: LINUXCNCVERSION: 2.9.0~pre0+git20221105.ffb6bda926 LINUXCNC_AUX_GLADEVCP: /usr/share/linuxcnc/aux_gladevcp LINUXCNC_AUX_EXAMPLES: /usr/share/linuxcnc/aux_examples REALTIME: /usr/lib/linuxcnc/realtime RTS: uspace HALLIB_DIR: /usr/share/linuxcnc/hallib PYTHON: /usr/bin/python3 dpkg -l '*linuxcnc*': Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Architecture Description +++-===================================-=====================================-============-===================================================================== ii linux-headers-6.1.0-rt5-linuxcnc-rt 6.1.0-rt5-linuxcnc-rt-4 amd64 Linux kernel headers for 6.1.0-rt5-linuxcnc-rt on amd64 ii linux-image-6.1.0-rt5-linuxcnc-rt 6.1.0-rt5-linuxcnc-rt-4 amd64 Linux kernel, version 6.1.0-rt5-linuxcnc-rt un linuxcnc (no description available) un linuxcnc-dev (no description available) un linuxcnc-doc (no description available) ii linuxcnc-doc-en 2.9.0~pre0+git20221105.ffb6bda926-1.2 all motion controller for CNC machines and robots (English documentation) un linuxcnc-doc-es (no description available) un linuxcnc-doc-fr (no description available) un linuxcnc-sim (no description available) un linuxcnc-sim-dev (no description available) ii linuxcnc-uspace 2.9.0~pre0+git20221105.ffb6bda926-1.2 amd64 motion controller for CNC machines and robots ii linuxcnc-uspace-dev 2.9.0~pre0+git20221105.ffb6bda926-1.2 amd64 PC based motion controller for real-time Linux