cnc@debian:~$ sudo dmesg | tail -50
[sudo] password for cnc: 
[    5.966756] input: Touch p303 Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:1FF7:0013.0001/input/input21
[    5.978572] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[    6.034352] kvm: disabled by bios
[    6.103325] usbcore: registered new interface driver r8188eu
[    6.110774] input: Touch p303 as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:1FF7:0013.0001/input/input22
[    6.121448] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[    6.149033] hid-multitouch 0003:1FF7:0013.0001: input,hiddev0,hidraw0: USB HID v1.11 Pointer [Touch p303] on usb-0000:00:14.0-1/input0
[    6.157445] kvm: disabled by bios
[    6.202850] intel_rapl: Found RAPL domain package
[    6.202853] intel_rapl: Found RAPL domain core
[    6.202854] intel_rapl: Found RAPL domain uncore
[    6.202860] intel_rapl: RAPL package 0 domain package locked by BIOS
[    6.505761] r8188eu 1-1.4:1.0 wlx8416f90eba86: renamed from wlan0
[    6.706935] Adding 998396k swap on /dev/sda5.  Priority:-2 extents:1 across:998396k SSFS
[    7.276887] systemd-journald[324]: Received request to flush runtime journal from PID 1
[    7.867444] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[    8.073512] broken atomic modeset userspace detected, disabling atomic
[    8.119487] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[    8.124155] IPv6: ADDRCONF(NETDEV_UP): wlx8416f90eba86: link is not ready
[    8.128174] r8188eu 1-1.4:1.0: firmware: direct-loading firmware rtlwifi/rtl8188eufw.bin
[    8.871872] MAC Address = 84:16:f9:0e:ba:86
[    8.875748] IPv6: ADDRCONF(NETDEV_UP): wlx8416f90eba86: link is not ready
[    8.965957] IPv6: ADDRCONF(NETDEV_UP): wlx8416f90eba86: link is not ready
[    9.836940] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[    9.836946] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
[   10.299084] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[   34.015771] r8188eu 1-1.4:1.0: firmware: direct-loading firmware rtlwifi/rtl8188eufw.bin
[   67.033317] r8188eu 1-1.4:1.0: firmware: direct-loading firmware rtlwifi/rtl8188eufw.bin
[  110.049121] r8188eu 1-1.4:1.0: firmware: direct-loading firmware rtlwifi/rtl8188eufw.bin
[  163.019996] r8188eu 1-1.4:1.0: firmware: direct-loading firmware rtlwifi/rtl8188eufw.bin
[  226.068802] r8188eu 1-1.4:1.0: firmware: direct-loading firmware rtlwifi/rtl8188eufw.bin
[  289.032520] r8188eu 1-1.4:1.0: firmware: direct-loading firmware rtlwifi/rtl8188eufw.bin
[  352.052220] r8188eu 1-1.4:1.0: firmware: direct-loading firmware rtlwifi/rtl8188eufw.bin
[  415.069531] r8188eu 1-1.4:1.0: firmware: direct-loading firmware rtlwifi/rtl8188eufw.bin
[  478.023053] r8188eu 1-1.4:1.0: firmware: direct-loading firmware rtlwifi/rtl8188eufw.bin
[  541.046613] r8188eu 1-1.4:1.0: firmware: direct-loading firmware rtlwifi/rtl8188eufw.bin
[  604.035308] r8188eu 1-1.4:1.0: firmware: direct-loading firmware rtlwifi/rtl8188eufw.bin
[  667.016607] r8188eu 1-1.4:1.0: firmware: direct-loading firmware rtlwifi/rtl8188eufw.bin
[  730.012312] r8188eu 1-1.4:1.0: firmware: direct-loading firmware rtlwifi/rtl8188eufw.bin
[  793.064759] r8188eu 1-1.4:1.0: firmware: direct-loading firmware rtlwifi/rtl8188eufw.bin
[  856.037551] r8188eu 1-1.4:1.0: firmware: direct-loading firmware rtlwifi/rtl8188eufw.bin
[  919.020000] r8188eu 1-1.4:1.0: firmware: direct-loading firmware rtlwifi/rtl8188eufw.bin
[  982.069059] r8188eu 1-1.4:1.0: firmware: direct-loading firmware rtlwifi/rtl8188eufw.bin
[ 1045.058080] r8188eu 1-1.4:1.0: firmware: direct-loading firmware rtlwifi/rtl8188eufw.bin
[ 1108.067627] r8188eu 1-1.4:1.0: firmware: direct-loading firmware rtlwifi/rtl8188eufw.bin
[ 1171.023825] r8188eu 1-1.4:1.0: firmware: direct-loading firmware rtlwifi/rtl8188eufw.bin
[ 1234.007870] r8188eu 1-1.4:1.0: firmware: direct-loading firmware rtlwifi/rtl8188eufw.bin
[ 1297.068800] r8188eu 1-1.4:1.0: firmware: direct-loading firmware rtlwifi/rtl8188eufw.bin
[ 1327.319770] perf: interrupt took too long (2513 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
[ 1360.037801] r8188eu 1-1.4:1.0: firmware: direct-loading firmware rtlwifi/rtl8188eufw.bin