cnc@debian:~$ sudo halcmd show param *.tmax
Parameters:
Owner   Type  Dir         Value  Name
    35  s32   RW          46132  debounce.0.tmax
    26  s32   RW              0  hm2_7i76e.0.read-request.tmax
    26  s32   RW        2818127  hm2_7i76e.0.read.tmax
    26  s32   RW        2377469  hm2_7i76e.0.write.tmax
    19  s32   RW          52251  motion-command-handler.tmax
    19  s32   RW          92178  motion-controller.tmax
    66  s32   RW          50179  not.0.tmax
    32  s32   RW          50883  or2.0.tmax
    32  s32   RW          47958  or2.1.tmax
    32  s32   RW          46976  or2.2.tmax
    29  s32   RW          52434  pid.s.do-pid-calcs.tmax
    29  s32   RW           6309  pid.x.do-pid-calcs.tmax
    29  s32   RW          18386  pid.y.do-pid-calcs.tmax
    29  s32   RW          54964  pid.y2.do-pid-calcs.tmax
    29  s32   RW          56308  pid.z.do-pid-calcs.tmax
    20  s32   RW        3190406  servo-thread.tmax
    63  s32   RW          49575  time.0.tmax