[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x414fd0b1] [ 0.000000] Linux version 6.1.61-rt15 (root@raspberrypi) (aarch64-linux-gnu-gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_RT Fri Nov 17 07:22:30 AEST 2023 [ 0.000000] random: crng init done [ 0.000000] Machine model: Raspberry Pi 5 Model B Rev 1.0 [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x000000003a000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000007ffff] [ 0.000000] node 0: [mem 0x0000000000080000-0x000000003f7fffff] [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000ffffffff] [ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 14 pages/cpu s178944 r8192 d42240 u229376 [ 0.000000] pcpu-alloc: s178944 r8192 d42240 u229376 alloc=14*16384 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: detected: Hardware dirty bit management [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=D8:3A:DD:C2:2C:4B vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=486f86bd-02 rootfstype=ext4 fsck.repair=yes loglevel=5 net.ifnames=0 processor.max_cstate=1 isolcpus=2,3 firmware_class.path=/lib/firmware/updates/brcm rootwait [ 0.000000] Dentry cache hash table entries: 524288 (order: 8, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 7, 2097152 bytes, linear) [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 4048304K/4186112K available (12480K kernel code, 2230K rwdata, 4096K rodata, 4480K init, 1241K bss, 72272K reserved, 65536K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 40053 entries in 40 pages [ 0.000000] ftrace: allocated 40 pages with 2 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [ 0.000000] No expedited grace period (rcu_normal_after_boot). [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000156] Console: colour dummy device 80x25 [ 0.000176] printk: console [tty1] enabled [ 0.000189] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000) [ 0.000194] pid_max: default: 32768 minimum: 301 [ 0.000215] LSM: Security Framework initializing [ 0.000275] Mount-cache hash table entries: 8192 (order: 2, 65536 bytes, linear) [ 0.000286] Mountpoint-cache hash table entries: 8192 (order: 2, 65536 bytes, linear) [ 0.000739] cgroup: Disabling memory control group subsystem [ 0.001231] cblist_init_generic: Setting adjustable number of callback queues. [ 0.001239] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.001278] cblist_init_generic: Setting adjustable number of callback queues. [ 0.001280] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.001311] cblist_init_generic: Setting adjustable number of callback queues. [ 0.001314] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.001463] rcu: Hierarchical SRCU implementation. [ 0.001465] rcu: Max phase no-delay instances is 1000. [ 0.001491] printk: console [tty1] printing thread started [ 0.002205] EFI services will not be available. [ 0.002323] smp: Bringing up secondary CPUs ... [ 0.002646] Detected PIPT I-cache on CPU1 [ 0.002697] CPU1: Booted secondary processor 0x0000000100 [0x414fd0b1] [ 0.003049] Detected PIPT I-cache on CPU2 [ 0.003089] CPU2: Booted secondary processor 0x0000000200 [0x414fd0b1] [ 0.003432] Detected PIPT I-cache on CPU3 [ 0.003467] CPU3: Booted secondary processor 0x0000000300 [0x414fd0b1] [ 0.003512] smp: Brought up 1 node, 4 CPUs [ 0.003516] SMP: Total of 4 processors activated. [ 0.003524] CPU features: detected: 32-bit EL0 Support [ 0.003526] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.003528] CPU features: detected: Common not Private translations [ 0.003529] CPU features: detected: CRC32 instructions [ 0.003532] CPU features: detected: RCpc load-acquire (LDAPR) [ 0.003533] CPU features: detected: LSE atomic instructions [ 0.003534] CPU features: detected: Privileged Access Never [ 0.003536] CPU features: detected: RAS Extension Support [ 0.003538] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.003579] CPU: All CPU(s) started at EL2 [ 0.003581] alternatives: applying system-wide alternatives [ 0.005546] devtmpfs: initialized [ 0.013483] Enabled cp15_barrier support [ 0.013490] Enabled setend support [ 0.013595] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.013601] futex hash table entries: 1024 (order: 2, 65536 bytes, linear) [ 0.013886] pinctrl core: initialized pinctrl subsystem [ 0.014192] DMI not present or invalid. [ 0.014381] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.015163] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.015216] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.015270] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.015296] audit: initializing netlink subsys (disabled) [ 0.015359] audit: type=2000 audit(0.012:1): state=initialized audit_enabled=0 res=1 [ 0.015646] thermal_sys: Registered thermal governor 'step_wise' [ 0.015664] cpuidle: using governor menu [ 0.015795] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.015837] ASID allocator initialised with 32768 entries [ 0.016108] Serial: AMBA PL011 UART driver [ 0.017628] bcm2835-mbox 107c013880.mailbox: mailbox enabled [ 0.018070] 107d001000.serial: ttyAMA10 at MMIO 0x107d001000 (irq = 15, base_baud = 0) is a PL011 rev2 [ 0.018114] printk: console [ttyAMA10] enabled [ 0.018118] printk: console [ttyAMA10] printing thread started [ 0.022722] raspberrypi-firmware soc:firmware: Attached to firmware from 2023-10-30T16:45:10, variant start_cd [ 0.026725] raspberrypi-firmware soc:firmware: Firmware hash is 30de0ba500000000000000000000000000000000 [ 0.036243] KASLR enabled [ 0.055539] bcm2835-dma 1000010000.dma: DMA legacy API manager, dmachans=0x1 [ 0.057097] iommu: Default domain type: Translated [ 0.057099] iommu: DMA domain TLB invalidation policy: strict mode [ 0.057253] SCSI subsystem initialized [ 0.057348] usbcore: registered new interface driver usbfs [ 0.057371] usbcore: registered new interface driver hub [ 0.057388] usbcore: registered new device driver usb [ 0.057465] usb_phy_generic phy: supply vcc not found, using dummy regulator [ 0.057600] pps_core: LinuxPPS API ver. 1 registered [ 0.057602] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.057608] PTP clock support registered [ 0.058075] vgaarb: loaded [ 0.058228] clocksource: Switched to clocksource arch_sys_counter [ 0.058383] VFS: Disk quotas dquot_6.6.0 [ 0.058398] VFS: Dquot-cache hash table entries: 2048 (order 0, 16384 bytes) [ 0.058443] FS-Cache: Loaded [ 0.058525] CacheFiles: Loaded [ 0.061872] NET: Registered PF_INET protocol family [ 0.061985] IP idents hash table entries: 65536 (order: 5, 524288 bytes, linear) [ 0.063360] tcp_listen_portaddr_hash hash table entries: 2048 (order: 2, 81920 bytes, linear) [ 0.063405] Table-perturb hash table entries: 65536 (order: 4, 262144 bytes, linear) [ 0.063411] TCP established hash table entries: 32768 (order: 4, 262144 bytes, linear) [ 0.063561] TCP bind hash table entries: 32768 (order: 7, 2621440 bytes, linear) [ 0.065505] TCP: Hash tables configured (established 32768 bind 32768) [ 0.065681] MPTCP token hash table entries: 4096 (order: 3, 229376 bytes, linear) [ 0.065822] UDP hash table entries: 2048 (order: 3, 196608 bytes, linear) [ 0.065991] UDP-Lite hash table entries: 2048 (order: 3, 196608 bytes, linear) [ 0.066220] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.118310] RPC: Registered named UNIX socket transport module. [ 0.118312] RPC: Registered udp transport module. [ 0.118314] RPC: Registered tcp transport module. [ 0.118315] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.118319] PCI: CLS 0 bytes, default 64 [ 0.118515] Trying to unpack rootfs image as initramfs... [ 0.126536] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 counters available [ 0.126711] kvm [1]: IPA Size Limit: 40 bits [ 0.126725] kvm [1]: GICV region size/alignment is unsafe, using trapping (reduced performance) [ 0.130566] kvm [1]: vgic interrupt IRQ9 [ 0.134349] kvm [1]: VHE mode initialized successfully [ 0.368228] Initialise system trusted keyrings [ 0.368383] workingset: timestamp_bits=46 max_order=18 bucket_order=0 [ 0.375988] zbud: loaded [ 0.377774] NFS: Registering the id_resolver key type [ 0.377788] Key type id_resolver registered [ 0.377790] Key type id_legacy registered [ 0.377861] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.377864] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.377981] F2FS not supported on PAGE_SIZE(16384) != 4096 [ 0.378137] Key type asymmetric registered [ 0.378140] Asymmetric key parser 'x509' registered [ 0.378164] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.383873] io scheduler mq-deadline registered [ 0.383879] io scheduler kyber registered [ 0.385036] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d503000, parent irq: 31) [ 0.385281] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508380, parent irq: 32) [ 0.385426] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508400, parent irq: 33) [ 0.385572] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d517b00, parent irq: 34) [ 0.387909] gpio-461 (RP1 RUN pin): hogged as output/high [ 0.389874] bcm2708_fb soc:fb: FB found 1 display(s) [ 0.401692] Freeing initrd memory: 20992K [ 0.408375] Console: switching to colour frame buffer device 240x67 [ 0.411794] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1920x1080 [ 0.444955] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled [ 0.445626] 107d50c000.serial: ttyS0 at MMIO 0x107d50c000 (irq = 37, base_baud = 6000000) is a 16550A [ 0.445704] serial serial0: tty port ttyS0 registered [ 0.446266] iproc-rng200 107d208000.rng: hwrng registered [ 0.446377] vc-mem: phys_addr:0x00000000 mem_base=0x3fc00000 mem_size:0x40000000(1024 MiB) [ 0.447023] bcm2712-iommu-cache 1000005b00.iommuc: bcm2712_iommu_cache_probe [ 0.451933] brd: module loaded [ 0.455177] loop: module loaded [ 0.455401] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 0.455626] Loading iSCSI transport class v2.0-870. [ 0.457481] usbcore: registered new interface driver r8152 [ 0.457513] usbcore: registered new interface driver lan78xx [ 0.457537] usbcore: registered new interface driver smsc95xx [ 0.457649] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 0.457698] dwc_otg: FIQ enabled [ 0.457700] dwc_otg: NAK holdoff enabled [ 0.457701] dwc_otg: FIQ split-transaction FSM enabled [ 0.457705] Module dwc_common_port init [ 0.457940] usbcore: registered new interface driver uas [ 0.457965] usbcore: registered new interface driver usb-storage [ 0.458135] mousedev: PS/2 mouse device common for all mice [ 0.466027] rpi-rtc soc:rpi_rtc: registered as rtc0 [ 0.467492] rpi-rtc soc:rpi_rtc: setting system clock to 1970-01-01T00:00:07 UTC (7) [ 0.468173] bcm2835-wdt bcm2835-wdt: Poweroff handler already present! [ 0.468175] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 0.471069] sdhci: Secure Digital Host Controller Interface driver [ 0.471071] sdhci: Copyright(c) Pierre Ossman [ 0.471168] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.471585] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 0.471608] hid: raw HID events driver (C) Jiri Kosina [ 0.471657] usbcore: registered new interface driver usbhid [ 0.471659] usbhid: USB HID core driver [ 0.471837] NET: Registered PF_PACKET protocol family [ 0.471871] Key type dns_resolver registered [ 0.472160] registered taskstats version 1 [ 0.472176] Loading compiled-in X.509 certificates [ 0.479716] Loaded X.509 cert 'Build time autogenerated kernel key: 8b31f088b3f1407439c6b49429a990a2e311826c' [ 0.479901] Key type .fscrypt registered [ 0.479903] Key type fscrypt-provisioning registered [ 0.482097] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@120000 ranges: [ 0.482104] brcm-pcie 1000120000.pcie: No bus range found for /axi/pcie@120000, using [bus 00-ff] [ 0.482129] brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000 [ 0.482140] brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000 [ 0.482163] brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000 [ 0.482175] brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000 [ 0.483390] brcm-pcie 1000120000.pcie: setting SCB_ACCESS_EN, READ_UR_MODE, MAX_BURST_SIZE [ 0.483399] brcm-pcie 1000120000.pcie: Forcing gen 2 [ 0.483485] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0000:00 [ 0.483489] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.483492] pci_bus 0000:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb]) [ 0.483496] pci_bus 0000:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff]) [ 0.483515] pci 0000:00:00.0: [14e4:2712] type 01 class 0x060400 [ 0.483573] pci 0000:00:00.0: PME# supported from D0 D3hot [ 0.484581] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.590237] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC) [ 0.590269] pci 0000:01:00.0: [1de4:0001] type 00 class 0x020000 [ 0.590288] pci 0000:01:00.0: reg 0x10: [mem 0xffffc000-0xffffffff] [ 0.590298] pci 0000:01:00.0: reg 0x14: [mem 0xffc00000-0xffffffff] [ 0.590307] pci 0000:01:00.0: reg 0x18: [mem 0xffff0000-0xffffffff] [ 0.590400] pci 0000:01:00.0: supports D1 [ 0.590402] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold [ 0.602258] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.602271] pci 0000:00:00.0: BAR 8: assigned [mem 0x1f00000000-0x1f005fffff] [ 0.602276] pci 0000:01:00.0: BAR 1: assigned [mem 0x1f00000000-0x1f003fffff] [ 0.602283] pci 0000:01:00.0: BAR 2: assigned [mem 0x1f00400000-0x1f0040ffff] [ 0.602288] pci 0000:01:00.0: BAR 0: assigned [mem 0x1f00410000-0x1f00413fff] [ 0.602294] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.602298] pci 0000:00:00.0: bridge window [mem 0x1f00000000-0x1f005fffff] [ 0.602306] pci 0000:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 [ 0.602316] pci 0000:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512 [ 0.602483] pcieport 0000:00:00.0: enabling device (0000 -> 0002) [ 0.602613] pcieport 0000:00:00.0: PME: Signaling with IRQ 38 [ 0.602738] pcieport 0000:00:00.0: AER: enabled with IRQ 38 [ 0.602929] rp1 0000:01:00.0: bar0 len 0x4000, start 0x1f00410000, end 0x1f00413fff, flags, 0x40200 [ 0.602933] rp1 0000:01:00.0: bar1 len 0x400000, start 0x1f00000000, end 0x1f003fffff, flags, 0x40200 [ 0.602944] rp1 0000:01:00.0: enabling device (0000 -> 0002) [ 0.605026] rp1 0000:01:00.0: chip_id 0x20001927 [ 0.630457] macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 106 (d8:3a:dd:c2:2c:4b) [ 0.631492] dw_axi_dmac_platform 1f00188000.dma: DesignWare AXI DMA Controller, 8 channels [ 0.690356] xhci-hcd xhci-hcd.0: xHCI Host Controller [ 0.690365] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1 [ 0.690828] xhci-hcd xhci-hcd.0: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000000000010810 [ 0.690896] xhci-hcd xhci-hcd.0: irq 131, io mem 0x1f00200000 [ 0.691001] xhci-hcd xhci-hcd.0: xHCI Host Controller [ 0.691004] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2 [ 0.691008] xhci-hcd xhci-hcd.0: Host supports USB 3.0 SuperSpeed [ 0.691090] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.691094] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.691096] usb usb1: Product: xHCI Host Controller [ 0.691099] usb usb1: Manufacturer: Linux 6.1.61-rt15 xhci-hcd [ 0.691101] usb usb1: SerialNumber: xhci-hcd.0 [ 0.691369] hub 1-0:1.0: USB hub found [ 0.691388] hub 1-0:1.0: 2 ports detected [ 0.691710] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.691714] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.691716] usb usb2: Product: xHCI Host Controller [ 0.691718] usb usb2: Manufacturer: Linux 6.1.61-rt15 xhci-hcd [ 0.691720] usb usb2: SerialNumber: xhci-hcd.0 [ 0.691947] hub 2-0:1.0: USB hub found [ 0.691961] hub 2-0:1.0: 1 port detected [ 0.754379] xhci-hcd xhci-hcd.1: xHCI Host Controller [ 0.754386] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 3 [ 0.754847] xhci-hcd xhci-hcd.1: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000000000010810 [ 0.754921] xhci-hcd xhci-hcd.1: irq 136, io mem 0x1f00300000 [ 0.755021] xhci-hcd xhci-hcd.1: xHCI Host Controller [ 0.755024] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4 [ 0.755028] xhci-hcd xhci-hcd.1: Host supports USB 3.0 SuperSpeed [ 0.755109] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.755113] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.755115] usb usb3: Product: xHCI Host Controller [ 0.755118] usb usb3: Manufacturer: Linux 6.1.61-rt15 xhci-hcd [ 0.755120] usb usb3: SerialNumber: xhci-hcd.1 [ 0.755382] hub 3-0:1.0: USB hub found [ 0.755399] hub 3-0:1.0: 2 ports detected [ 0.755708] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.755711] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.755713] usb usb4: Product: xHCI Host Controller [ 0.755715] usb usb4: Manufacturer: Linux 6.1.61-rt15 xhci-hcd [ 0.755717] usb usb4: SerialNumber: xhci-hcd.1 [ 0.755947] hub 4-0:1.0: USB hub found [ 0.755963] hub 4-0:1.0: 1 port detected [ 0.756995] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 [ 0.757333] platform 1000800000.codec: bcm2712_iommu_probe_device: MMU 1000005100.iommu [ 0.757336] platform 1000800000.codec: bcm2712_iommu_device_group: MMU 1000005100.iommu [ 0.757344] platform 1000800000.codec: Adding to iommu group 0 [ 0.757363] platform 1000880000.pisp_be: bcm2712_iommu_probe_device: MMU 1000005100.iommu [ 0.757364] platform 1000880000.pisp_be: bcm2712_iommu_device_group: MMU 1000005100.iommu [ 0.757372] platform 1000880000.pisp_be: Adding to iommu group 0 [ 0.757412] platform 1000800000.codec: bcm2712_iommu_attach_dev: MMU 1000005100.iommu [ 0.757413] platform 1000880000.pisp_be: bcm2712_iommu_attach_dev: MMU 1000005100.iommu [ 0.757418] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_probe: Success [ 0.757862] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 [ 0.758203] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_probe: Success [ 0.758828] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 [ 0.759180] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_probe: Success [ 0.759353] sdhci-brcmstb 1000fff000.mmc: there is not valid maps for state default [ 0.759809] mmc0: CQHCI version 5.10 [ 0.759846] mmc1: CQHCI version 5.10 [ 0.762379] of_cfs_init [ 0.762416] of_cfs_init: OK [ 0.795939] mmc0: SDHCI controller on 1000fff000.mmc [1000fff000.mmc] using ADMA 64-bit [ 0.891045] mmc0: new ultra high speed SDR104 SDHC card at address 5048 [ 0.891359] mmcblk0: mmc0:5048 SD32G 29.7 GiB [ 0.893216] mmcblk0: p1 p2 [ 0.893409] mmcblk0: mmc0:5048 SD32G 29.7 GiB (quirks 0x00004000) [ 0.948794] mmc1: SDHCI controller on 1001100000.mmc [1001100000.mmc] using ADMA 64-bit [ 0.952183] Freeing unused kernel memory: 4480K [ 0.952235] Run /init as init process [ 0.952237] with arguments: [ 0.952238] /init [ 0.952239] with environment: [ 0.952240] HOME=/ [ 0.952241] TERM=linux [ 0.954276] usb 1-2: new full-speed USB device number 2 using xhci-hcd [ 0.982717] mmc1: new ultra high speed DDR50 SDIO card at address 0001 [ 1.010261] usb 3-2: new full-speed USB device number 2 using xhci-hcd [ 1.106076] usb 1-2: New USB device found, idVendor=17ef, idProduct=6071, bcdDevice= 1.00 [ 1.106084] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.106087] usb 1-2: Product: Lenovo 500 Wireless HID [ 1.106090] usb 1-2: Manufacturer: Lenovo [ 1.147261] input: Lenovo Lenovo 500 Wireless HID as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-2/1-2:1.0/0003:17EF:6071.0001/input/input0 [ 1.160836] usb 3-2: New USB device found, idVendor=1357, idProduct=1001, bcdDevice= 1.00 [ 1.160844] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.160847] usb 3-2: Product: USB Device [ 1.160849] usb 3-2: Manufacturer: HL 0000 00 00 00-01 [ 1.165605] input: pwr_button as /devices/platform/pwr_button/input/input1 [ 1.197607] input: HL 0000 00 00 00-01 USB Device as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2:1.0/0003:1357:1001.0002/input/input2 [ 1.206721] hid-generic 0003:17EF:6071.0001: input,hidraw0: USB HID v1.11 Keyboard [Lenovo Lenovo 500 Wireless HID] on usb-xhci-hcd.0-2/input0 [ 1.219224] input: Lenovo Lenovo 500 Wireless HID Consumer Control as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-2/1-2:1.1/0003:17EF:6071.0003/input/input3 [ 1.266717] hid-generic 0003:1357:1001.0002: input,hidraw1: USB HID v1.01 Keyboard [HL 0000 00 00 00-01 USB Device] on usb-xhci-hcd.1-2/input0 [ 1.283123] input: HL 0000 00 00 00-01 USB Device as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2:1.1/0003:1357:1001.0004/input/input6 [ 1.326496] input: Lenovo Lenovo 500 Wireless HID System Control as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-2/1-2:1.1/0003:17EF:6071.0003/input/input4 [ 1.326743] hid-generic 0003:1357:1001.0004: input,hidraw2: USB HID v1.01 Mouse [HL 0000 00 00 00-01 USB Device] on usb-xhci-hcd.1-2/input1 [ 1.326970] hid-generic 0003:17EF:6071.0003: input,hiddev96,hidraw3: USB HID v1.11 Device [Lenovo Lenovo 500 Wireless HID] on usb-xhci-hcd.0-2/input1 [ 1.329515] input: HL 0000 00 00 00-01 USB Device Consumer Control as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2:1.2/0003:1357:1001.0005/input/input7 [ 1.347102] input: Lenovo Lenovo 500 Wireless HID Mouse as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-2/1-2:1.2/0003:17EF:6071.0006/input/input9 [ 1.386516] input: HL 0000 00 00 00-01 USB Device System Control as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2:1.2/0003:1357:1001.0005/input/input8 [ 1.386751] hid-generic 0003:17EF:6071.0006: input,hiddev97,hidraw4: USB HID v1.11 Mouse [Lenovo Lenovo 500 Wireless HID] on usb-xhci-hcd.0-2/input2 [ 1.386916] hid-generic 0003:1357:1001.0005: input,hidraw5: USB HID v1.01 Device [HL 0000 00 00 00-01 USB Device] on usb-xhci-hcd.1-2/input2 [ 1.538446] uart-pl011 107d001000.serial: no DMA platform data [ 1.622538] raid6: neonx8 gen() 7813 MB/s [ 1.690249] raid6: neonx4 gen() 6502 MB/s [ 1.758306] raid6: neonx2 gen() 5091 MB/s [ 1.826256] raid6: neonx1 gen() 4639 MB/s [ 1.894298] raid6: int64x8 gen() 3270 MB/s [ 1.962240] raid6: int64x4 gen() 3054 MB/s [ 2.030278] raid6: int64x2 gen() 2392 MB/s [ 2.098244] raid6: int64x1 gen() 2308 MB/s [ 2.098245] raid6: using algorithm neonx8 gen() 7813 MB/s [ 2.166238] raid6: .... xor() 5302 MB/s, rmw enabled [ 2.166240] raid6: using neon recovery algorithm [ 2.169868] xor: measuring software checksum speed [ 2.170897] 8regs : 9937 MB/sec [ 2.171901] 32regs : 9835 MB/sec [ 2.172623] arm64_neon : 13673 MB/sec [ 2.172624] xor: using function: arm64_neon (13673 MB/sec) [ 2.216567] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 2.640530] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [ 2.951423] systemd[1]: System time before build time, advancing clock. [ 3.033425] NET: Registered PF_INET6 protocol family [ 3.033966] Segment Routing with IPv6 [ 3.033976] In-situ OAM (IOAM) with IPv6 [ 3.073125] systemd[1]: systemd 252.23-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 3.073136] systemd[1]: Detected architecture arm64. [ 3.078146] systemd[1]: Hostname set to . [ 3.289238] systemd[1]: /etc/systemd/system/rc-local.service:11: Support for option SysVStartPriority= has been removed and it is ignored [ 3.390814] systemd[1]: Queued start job for default target graphical.target. [ 3.419183] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ 3.419694] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 3.420091] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. [ 3.420476] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. [ 3.420754] systemd[1]: Created slice user.slice - User and Session Slice. [ 3.420881] systemd[1]: Started ntpsec-systemd-netif.path. [ 3.421026] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 3.421332] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. [ 3.421410] systemd[1]: Expecting device dev-disk-by\x2duuid-5746\x2d22D9.device - /dev/disk/by-uuid/5746-22D9... [ 3.421463] systemd[1]: Expecting device dev-serial1.device - /dev/serial1... [ 3.421523] systemd[1]: Expecting device dev-ttyAMA10.device - /dev/ttyAMA10... [ 3.421605] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ 3.421686] systemd[1]: Reached target remote-fs.target - Remote File Systems. [ 3.421735] systemd[1]: Reached target slices.target - Slice Units. [ 3.421798] systemd[1]: Reached target swap.target - Swaps. [ 3.421856] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ 3.422096] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. [ 3.422261] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 3.422677] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. [ 3.422916] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 3.423158] systemd[1]: Listening on systemd-journald.socket - Journal Socket. [ 3.426180] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 3.426435] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 3.426681] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages). [ 3.427906] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 3.429435] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 3.431083] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... [ 3.433828] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock... [ 3.439519] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... [ 3.441245] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 3.444938] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... [ 3.447232] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... [ 3.452625] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... [ 3.458589] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... [ 3.460612] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... [ 3.475930] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... [ 3.476418] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). [ 3.479350] systemd[1]: Starting systemd-journald.service - Journal Service... [ 3.493098] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 3.495252] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 3.504872] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 3.506460] fuse: init (API version 7.37) [ 3.509873] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 3.517239] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ 3.522130] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ 3.522847] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. [ 3.525296] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 3.526158] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock. [ 3.527017] snd_bcm2835: unknown parameter 'enable_compat_alsa' ignored [ 3.535585] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 3.539716] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 3.539978] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. [ 3.540662] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. [ 3.540867] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. [ 3.541331] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 3.541518] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. [ 3.542750] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 3.542943] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. [ 3.543980] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 3.544192] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. [ 3.545212] systemd[1]: modprobe@loop.service: Deactivated successfully. [ 3.545408] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. [ 3.546479] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules. [ 3.556081] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. [ 3.571769] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. [ 3.590735] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... [ 3.595414] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... [ 3.596142] systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes). [ 3.596244] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [ 3.597779] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed... [ 3.599131] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. [ 3.600706] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables... [ 3.603786] systemd[1]: Starting systemd-sysusers.service - Create System Users... [ 3.609103] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. [ 3.656831] systemd[1]: Started systemd-journald.service - Journal Service. [ 3.704434] systemd-journald[319]: Received client request to flush runtime journal. [ 4.333304] rpi-gpiomem 107d508500.gpiomem: window base 0x107d508500 size 0x00000040 [ 4.333420] rpi-gpiomem 107d508500.gpiomem: initialised 1 regions as /dev/gpiomem1 [ 4.333510] rpi-gpiomem 107d517c00.gpiomem: window base 0x107d517c00 size 0x00000040 [ 4.333569] rpi-gpiomem 107d517c00.gpiomem: initialised 1 regions as /dev/gpiomem2 [ 4.333641] rpi-gpiomem 107d504100.gpiomem: window base 0x107d504100 size 0x00000020 [ 4.333697] rpi-gpiomem 107d504100.gpiomem: initialised 1 regions as /dev/gpiomem3 [ 4.333768] rpi-gpiomem 107d510700.gpiomem: window base 0x107d510700 size 0x00000020 [ 4.333824] rpi-gpiomem 107d510700.gpiomem: initialised 1 regions as /dev/gpiomem4 [ 4.334047] rpi-gpiomem 1f000d0000.gpiomem: window base 0x1f000d0000 size 0x00030000 [ 4.334105] rpi-gpiomem 1f000d0000.gpiomem: initialised 1 regions as /dev/gpiomem0 [ 4.400131] mc: Linux media interface: v0.10 [ 4.539796] videodev: Linux video capture interface: v2.00 [ 4.640391] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned. [ 4.642444] rpivid 1000800000.codec: bcm2712_iommu_of_xlate: MMU 1000005100.iommu [ 4.660819] pispbe 1000880000.pisp_be: bcm2712_iommu_of_xlate: MMU 1000005100.iommu [ 4.670101] rpivid 1000800000.codec: Device registered as /dev/video19 [ 4.692158] pispbe 1000880000.pisp_be: pispbe_probe: HW version: 0x02252700 [ 4.692167] pispbe 1000880000.pisp_be: pispbe_probe: BatchStatus: 0x00000000 [ 4.692170] pispbe 1000880000.pisp_be: pispbe_probe: Status: 0x00000000 [ 4.692172] pispbe 1000880000.pisp_be: Register nodes for group 0 [ 4.692739] pispbe 1000880000.pisp_be: input device node registered as /dev/video20 [ 4.707424] pispbe 1000880000.pisp_be: tdn_input device node registered as /dev/video21 [ 4.707594] pispbe 1000880000.pisp_be: stitch_input device node registered as /dev/video22 [ 4.707849] pispbe 1000880000.pisp_be: hog_output device node registered as /dev/video23 [ 4.716351] pispbe 1000880000.pisp_be: output0 device node registered as /dev/video24 [ 4.720316] pispbe 1000880000.pisp_be: output1 device node registered as /dev/video25 [ 4.721948] pispbe 1000880000.pisp_be: tdn_output device node registered as /dev/video26 [ 4.730455] pispbe 1000880000.pisp_be: stitch_output device node registered as /dev/video27 [ 4.732076] pispbe 1000880000.pisp_be: config device node registered as /dev/video28 [ 4.733516] pispbe 1000880000.pisp_be: Register nodes for group 1 [ 4.738560] pispbe 1000880000.pisp_be: input device node registered as /dev/video29 [ 4.741688] pispbe 1000880000.pisp_be: tdn_input device node registered as /dev/video30 [ 4.742187] pispbe 1000880000.pisp_be: stitch_input device node registered as /dev/video31 [ 4.745727] pispbe 1000880000.pisp_be: hog_output device node registered as /dev/video32 [ 4.745873] pispbe 1000880000.pisp_be: output0 device node registered as /dev/video33 [ 4.745992] pispbe 1000880000.pisp_be: output1 device node registered as /dev/video34 [ 4.746120] pispbe 1000880000.pisp_be: tdn_output device node registered as /dev/video35 [ 4.747494] pispbe 1000880000.pisp_be: stitch_output device node registered as /dev/video36 [ 4.747667] pispbe 1000880000.pisp_be: config device node registered as /dev/video37 [ 4.945585] ec_master: loading out-of-tree module taints kernel. [ 4.948517] ec_master: module verification failed: signature and/or required key missing - tainting kernel [ 4.961783] EtherCAT: Master driver 1.5.2 1.5.2.431.g4ad89af-1+431.1 [ 4.962471] EtherCAT: 1 master waiting for devices. [ 5.120328] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 5.125924] Bluetooth: Core ver 2.22 [ 5.125962] NET: Registered PF_BLUETOOTH protocol family [ 5.125964] Bluetooth: HCI device and connection manager initialized [ 5.125972] Bluetooth: HCI socket layer initialized [ 5.125977] Bluetooth: L2CAP socket layer initialized [ 5.125985] Bluetooth: SCO socket layer initialized [ 5.140045] Bluetooth: HCI UART driver ver 2.3 [ 5.140053] Bluetooth: HCI UART protocol H4 registered [ 5.140101] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 5.140266] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator [ 5.140347] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator [ 5.140440] Bluetooth: HCI UART protocol Broadcom registered [ 5.184047] ec_generic: EtherCAT master generic Ethernet device module 1.5.2 1.5.2.431.g4ad89af-1+431.1 [ 5.184066] EtherCAT: Accepting D8:3A:DD:C2:2C:4B as main device for master 0. [ 5.184079] ec_generic: Binding socket to interface 2 (eth0). [ 5.202494] EtherCAT 0: Starting EtherCAT-IDLE thread. [ 5.272785] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 5.273117] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 5.273710] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 5.420180] zram: Added device: zram0 [ 5.511482] zram0: detected capacity change from 0 to 2097152 [ 5.535009] Bluetooth: hci0: BCM: chip id 107 [ 5.535109] Adding 1048560k swap on /dev/zram0. Priority:100 extents:1 across:1048560k SSFS [ 5.536996] Bluetooth: hci0: BCM: features 0x2f [ 5.538415] Bluetooth: hci0: BCM4345C0 [ 5.538421] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000 [ 5.551044] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.hcd' Patch [ 5.568951] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 5.580337] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 5.580409] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,5-model-b.bin failed with error -2 [ 5.580794] usbcore: registered new interface driver brcmfmac [ 5.749267] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Nov 1 2021 00:37:25 version 7.45.241 (1a2f2fa CY) FWID 01-703fd60 [ 5.983213] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.983218] Bluetooth: BNEP filters: protocol multicast [ 5.983228] Bluetooth: BNEP socket layer initialized [ 6.118400] macb 1f00100000.ethernet eth0: PHY [1f00100000.ethernet-ffffffff:01] driver [Broadcom BCM54213PE] (irq=POLL) [ 6.118410] macb 1f00100000.ethernet eth0: configuring for phy/rgmii-id link mode [ 6.128433] pps pps0: new PPS source ptp0 [ 6.128948] macb 1f00100000.ethernet: gem-ptp-timer ptp clock registered. [ 6.180219] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled [ 6.318941] Bluetooth: hci0: BCM: features 0x2f [ 6.320368] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+ [ 6.320371] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0342 [ 6.320678] Bluetooth: hci0: BCM: Using default device address (43:45:c0:00:1f:ac) [ 6.338758] Bluetooth: MGMT ver 1.22 [ 6.347325] NET: Registered PF_ALG protocol family [ 6.720343] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled [ 8.191678] macb 1f00100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 8.191698] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 8.198246] EtherCAT 0: Link state of ecm0 changed to UP. [ 8.210292] EtherCAT 0: 5 slave(s) responding on main device. [ 8.210297] EtherCAT 0: Slave states on main device: INIT. [ 8.210517] EtherCAT 0: Scanning bus. [ 8.651651] EtherCAT ERROR 0-3: SDO upload 0x0000:00 aborted. [ 8.651658] EtherCAT ERROR 0-3: SDO abort message 0x06020000: "This object does not exist in the object directory". [ 8.651661] EtherCAT ERROR 0-3: Failed to read number of mapped PDO entries. [ 8.651663] EtherCAT ERROR 0-3: Failed to read mapped PDO entries for PDO 0x0000. [ 8.656426] EtherCAT ERROR 0-3: SDO upload 0x0000:00 aborted. [ 8.656429] EtherCAT ERROR 0-3: SDO abort message 0x06020000: "This object does not exist in the object directory". [ 8.656432] EtherCAT ERROR 0-3: Failed to read number of mapped PDO entries. [ 8.656433] EtherCAT ERROR 0-3: Failed to read mapped PDO entries for PDO 0x0000. [ 8.708903] EtherCAT ERROR 0-4: SDO upload 0x0000:00 aborted. [ 8.708909] EtherCAT ERROR 0-4: SDO abort message 0x06020000: "This object does not exist in the object directory". [ 8.708913] EtherCAT ERROR 0-4: Failed to read number of mapped PDO entries. [ 8.708915] EtherCAT ERROR 0-4: Failed to read mapped PDO entries for PDO 0x0000. [ 8.713866] EtherCAT ERROR 0-4: SDO upload 0x0000:00 aborted. [ 8.713870] EtherCAT ERROR 0-4: SDO abort message 0x06020000: "This object does not exist in the object directory". [ 8.713873] EtherCAT ERROR 0-4: Failed to read number of mapped PDO entries. [ 8.713874] EtherCAT ERROR 0-4: Failed to read mapped PDO entries for PDO 0x0000. [ 8.713878] EtherCAT 0: Bus scanning completed in 500 ms. [ 8.713881] EtherCAT 0: Using slave 0 as DC reference clock. [ 8.718227] EtherCAT 0: Slave states on main device: INIT, PREOP. [ 8.766264] EtherCAT 0: Slave states on main device: PREOP. [ 10.146358] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled [ 10.159145] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled [ 13.119256] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 37.618779] EtherCAT: Requesting master 0... [ 37.618790] EtherCAT: Successfully requested master 0. [ 37.754455] EtherCAT 0: Domain0: Logical address 0x00000000, 56 byte, expected working counter 9. [ 37.754461] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 56 byte, type LRW. [ 37.754479] EtherCAT 0: Master thread exited. [ 37.754483] EtherCAT 0: Starting EtherCAT-OP thread. [ 41.417985] EtherCAT 0: Slave states on main device: OP. [ 45.635912] EtherCAT 0: Master thread exited. [ 45.635957] EtherCAT 0: Starting EtherCAT-IDLE thread. [ 45.636020] EtherCAT ERROR 0-4: Failed to receive AL state datagram: Datagram initialized. [ 45.636040] EtherCAT 0: Releasing master... [ 45.636044] EtherCAT 0: Released. [ 45.641988] EtherCAT 0: Slave states on main device: SAFEOP, OP + ERROR. [ 45.678216] EtherCAT ERROR 0-3: AL status message 0x001A: "Synchronization error". [ 45.678427] EtherCAT 0-3: Acknowledged state SAFEOP. [ 45.686179] EtherCAT ERROR 0-4: AL status message 0x001A: "Synchronization error". [ 45.686387] EtherCAT 0-4: Acknowledged state SAFEOP. [ 45.693983] EtherCAT 0: Slave states on main device: PREOP. [ 46.461941] EtherCAT WARNING: Datagram 00000000fd2d276d (master-fsm) was SKIPPED 1 time. [ 56.189141] EtherCAT: Requesting master 0... [ 56.189152] EtherCAT: Successfully requested master 0. [ 56.314499] EtherCAT 0: Domain0: Logical address 0x00000000, 56 byte, expected working counter 9. [ 56.314504] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 56 byte, type LRW. [ 56.314573] EtherCAT 0: Master thread exited. [ 56.314577] EtherCAT 0: Starting EtherCAT-OP thread. [ 56.314632] EtherCAT WARNING 0: 1 datagram UNMATCHED! [ 57.282105] EtherCAT 0: Slave states on main device: OP.