Error report created by /usr/lib/tcltk/linuxcnc/show_errors.tcl: Print file information: RUN_IN_PLACE=no LINUXCNC_DIR= LINUXCNC_BIN_DIR=/usr/bin LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc LINUXCNC_SCRIPT_DIR= LINUXCNC_RTLIB_DIR=/usr/lib/linuxcnc/modules LINUXCNC_CONFIG_DIR= LINUXCNC_LANG_DIR=/usr/lib/tcltk/linuxcnc/msgs INIVAR=inivar HALCMD=halcmd LINUXCNC_EMCSH=/usr/bin/wish8.6 LINUXCNC - 2.9.3 Machine configuration directory is '/home/edmuser/linuxcnc/configs/BaxEDM-2axis-WireEDM' Machine configuration file is '2axis-WireEDM.ini' INIFILE=/home/edmuser/linuxcnc/configs/BaxEDM-2axis-WireEDM/2axis-WireEDM.ini VERSION=1.1 PARAMETER_FILE=baxedm_mm.var TPMOD= HOMEMOD= TASK=milltask HALUI=halui DISPLAY=axis COORDINATES=XYZ KINEMATICS=trivkins coordinates=xyz Starting LinuxCNC... Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Starting LinuxCNC IO program: io libnml/buffer/shmem.cc 320: Shared memory buffers toolCmd and toolCmd may conflict. (key=1004(0x3EC)) libnml/buffer/shmem.cc 320: Shared memory buffers toolSts and toolSts may conflict. (key=1005(0x3ED)) libnml/buffer/shmem.cc 320: Shared memory buffers emcError and emcError may conflict. (key=1003(0x3EB)) emc/iotask/ioControl.cc 786: can't load tool table. Starting HAL User Interface program: halui linuxcnc TPMOD=tpmod HOMEMOD=homemod EMCMOT=motmod Found file(REL): ./2axis-WireEDM.hal Starting TASK program: milltask Starting DISPLAY program: axis Shutting down and cleaning up LinuxCNC... task: 3831 cycles, min=0.000012, max=0.004190, avg=0.001074, 0 latency excursions (> 10x expected cycle time of 0.001000s) Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments Debug file information: Note: Using POSIX realtime /usr/bin/env: ‘python’: No such file or directory /usr/bin/env: ‘python’: No such file or directory note: MAXV max: 12.000 units/sec 720.000 units/min note: LJOG max: 12.000 units/sec 720.000 units/min note: LJOG default: 100.000 units/sec 6000.000 units/min note: jog_order='XYZ' note: jog_invert=set() [QTvcp][DEBUG] DEBUGGING logging on (qtvcp:540) [QTvcp.QTVCP.QT_ISTAT][DEBUG] Machine is METRIC based. unit Conversion constant=0.03937007874015748 (qt_istat.py:162) [QTvcp.QTVCP.QT_ISTAT][DEBUG] TRAJ COORDINATES: XYZ (qt_istat.py:173) [QTvcp.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No DEFAULT_LINEAR_VELOCITY Entry in DISPLAY, Using: 25 (qt_istat.py:532) [QTvcp.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MIN_LINEAR_VELOCITY Entry in DISPLAY, Using: 0 (qt_istat.py:532) [QTvcp.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MAX_LINEAR_VELOCITY Entry in DISPLAY, Using: 125 (qt_istat.py:532) [QTvcp.QTVCP.QT_ISTAT][DEBUG] DEFAULT_LINEAR_VELOCITY = 1500.0 (qt_istat.py:357) [QTvcp.QTVCP.QT_ISTAT][DEBUG] MIN_LINEAR_VELOCITY = 0.0 (qt_istat.py:358) [QTvcp.QTVCP.QT_ISTAT][DEBUG] MAX_LINEAR_VELOCITY = 7500.0 (qt_istat.py:359) [QTvcp.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No DEFAULT_SPINDLE_0_SPEED Entry in DISPLAY, Using: 200 (qt_istat.py:532) [QTvcp.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MIN_SPINDLE_0_SPEED Entry in DISPLAY, Using: 100 (qt_istat.py:532) [QTvcp.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MAX_SPINDLE_0_SPEED Entry in DISPLAY, Using: 2500 (qt_istat.py:532) [QTvcp.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MAX_SPINDLE_0_OVERRIDE Entry in DISPLAY, Using: 1 (qt_istat.py:532) [QTvcp.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MIN_SPINDLE_0_OVERRIDE Entry in DISPLAY, Using: 0.5 (qt_istat.py:532) [QTvcp.QTVCP.QT_ISTAT][WARNING] Embedded tab configuration -invalid number of TAB_NAMES vs TAB_LOCATION - guessing default. (qt_istat.py:446) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Passed name=baxedm2, BASENAME=baxedm2 BASEPATH=baxedm2 (qt_pstat.py:100) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for handler file in: /home/edmuser/linuxcnc/configs/BaxEDM-2axis-WireEDM/qtvcp/panels/baxedm2/baxedm2_handler.py (qt_pstat.py:124) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for handler file in: /home/edmuser/linuxcnc/configs/BaxEDM-2axis-WireEDM/baxedm2_handler.py (qt_pstat.py:124) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for default handler file in: /usr/share/qtvcp/panels/baxedm2/baxedm2_handler.py (qt_pstat.py:131) [QTvcp.QTVCP.QT_PSTAT][INFO] No handler file found. (qt_pstat.py:137) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .ui in: /home/edmuser/linuxcnc/configs/BaxEDM-2axis-WireEDM/qtvcp/panels/baxedm2/baxedm2.ui (qt_pstat.py:157) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .ui in: /home/edmuser/linuxcnc/configs/BaxEDM-2axis-WireEDM/baxedm2.ui (qt_pstat.py:157) [QTvcp.QTVCP.QT_PSTAT][INFO] Using LOCAL ui file from: /home/edmuser/linuxcnc/configs/BaxEDM-2axis-WireEDM/baxedm2.ui (qt_pstat.py:159) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .qss in: /home/edmuser/linuxcnc/configs/BaxEDM-2axis-WireEDM/qtvcp/panels/baxedm2/baxedm2.qss (qt_pstat.py:201) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .qss in: /home/edmuser/linuxcnc/configs/BaxEDM-2axis-WireEDM/baxedm2.qss (qt_pstat.py:201) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .qss in: /usr/share/qtvcp/panels/baxedm2/baxedm2.qss (qt_pstat.py:208) [QTvcp.QTVCP.QT_PSTAT][INFO] No qss file found. (qt_pstat.py:214) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .qrc in: /home/edmuser/linuxcnc/configs/BaxEDM-2axis-WireEDM/qtvcp/panels/baxedm2/baxedm2.qrc (qt_pstat.py:230) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .qrc in: /home/edmuser/linuxcnc/configs/BaxEDM-2axis-WireEDM/baxedm2.qrc (qt_pstat.py:230) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .qrc in: /usr/share/qtvcp/panels/baxedm2/baxedm2.qrc (qt_pstat.py:238) [QTvcp.QTVCP.QT_PSTAT][INFO] No qrc file found. (qt_pstat.py:245) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for resources.py in: /home/edmuser/linuxcnc/configs/BaxEDM-2axis-WireEDM/qtvcp/panels/resources.py (qt_pstat.py:255) [QTvcp.QTVCP.QT_PSTAT][INFO] No resources.py file found, no QRC file to compile one from. (qt_pstat.py:266) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for translation file in: /home/edmuser/linuxcnc/configs/BaxEDM-2axis-WireEDM/qtvcp/screens/baxedm2/baxedm2.qrc (qt_pstat.py:277) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for translation file in: /home/edmuser/linuxcnc/configs/BaxEDM-2axis-WireEDM/baxedm2/languages/baxedm2_en.qm (qt_pstat.py:277) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for translation file in: /usr/share/qtvcp/screens/baxedm2/languages/baxedm2_en.qm (qt_pstat.py:284) [QTvcp.QTVCP.QT_PSTAT][INFO] Using no translations, default system locale is: en (qt_pstat.py:289) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for LOCAL about file in: /home/edmuser/linuxcnc/configs/BaxEDM-2axis-WireEDM/baxedm2_ABOUT (qt_pstat.py:305) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for LOCAL about file in: /home/edmuser/linuxcnc/configs/BaxEDM-2axis-WireEDM/qtvcp/panels/baxedm2_ABOUT (qt_pstat.py:305) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for DEFAULT about file in: /usr/share/qtvcp/panels/baxedm2/baxedm2_ABOUT (qt_pstat.py:311) [QTvcp.QTVCP.QT_PSTAT][DEBUG] No about file found. (qt_pstat.py:317) [QTvcp][INFO] Building A VCP Panel with: Python 3 (qtvcp:197) [QTvcp][INFO] No handler file specified - using: None (qtvcp:200) [QTvcp.QTVCP.QT_MAKEGUI][INFO] Qsettings file path: /home/edmuser/.config/QtVcp/baxedm2.conf (qt_makegui.py:98) [QTvcp.QTVCP.QT_MAKEGUI][INFO] No resource file to load: None (qt_makegui.py:196) [QTvcp.QTVCP.WIDGETS.SCREEN_OPTIONS][DEBUG] Preference File Path: ~/.qtvcp_screen_preferences (screen_options.py:313) [QTvcp.QTVCP.QT_MAKEPINS][DEBUG] QTVCP: Parsing for HAL widgets. (qt_makepins.py:144) [QTvcp.QTVCP.WIDGETS.SCREEN_OPTIONS][INFO] Installing Embedded tab:BaxEDM, default, halcmd loadusr -Wn qtvcp_embed qtvcp -d -c qtvcp_embed -x {XID} baxedm2 (screen_options.py:461) [QTvcp.QTVCP.WIDGETS.SCREEN_OPTIONS][WARNING] problem inserting VCP 'BaxEDM' to location: rightTab : 'VCPWindow' object has no attribute 'rightTab' (screen_options.py:485) [QTvcp.QTVCP.QT_TSTAT][DEBUG] Toolfile does not exist' lathe.tbl (qt_tstat.py:113) [QTvcp.QTVCP.QT_TSTAT][DEBUG] Toolfile does not exist' lathe.tbl (qt_tstat.py:113) [QTvcp][DEBUG] Set HAL ready. (qtvcp:323) baxedm_postgui.hal:65: Pin 'baxuipushbuttons.executeM119P0' does not exist [QTvcp][CRITICAL] Forwarding events to AXIS is not well tested yet. (qtvcp:332) [QTvcp][DEBUG] Show window. (qtvcp:380) [QTvcp.QTVCP.QT_MAKEPINS][DEBUG] Calculating geometry of main window using natural placement: 136 168 843 706 (qt_makepins.py:200) 4826 4860 Stopping realtime threads Unloading hal components Note: Using POSIX realtime ----------------------------------------------------------------------- Info report created by linuxcnc_info: The file: /tmp/linuxcnc_info.txt can be posted to a forum or a web site like: http://pastebin.com in order to provide information about the linuxcnc system and configuration. Date: Sat Oct 12 09:57:05 AM EDT 2024 UTC Date: Sat Oct 12 01:57:05 PM UTC 2024 this program: /usr/bin/linuxcnc_info uptime: 09:57:05 up 26 min, 1 user, load average: 1.95, 1.87, 1.55 lsb_release -sa: Debian Debian GNU/Linux 12 (bookworm) 12 bookworm linuxcnc: /usr/bin/linuxcnc pwd: /home/edmuser/linuxcnc/configs/BaxEDM-2axis-WireEDM USER: edmuser LOGNAME: edmuser HOME: /home/edmuser EDITOR: VISUAL: LANGUAGE: TERM: dumb COLORTERM: DISPLAY: :0.0 DESKTOP: lightdm-xsession display size: 1920x1080 pixels (508x285 millimeters) PATH: /usr/bin:/home/edmuser/linuxcnc/configs/BaxEDM-2axis-WireEDM/bin:/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games uname items: nodename -n: edmpc kernel-name -s: Linux kernel-vers -v: #1 SMP PREEMPT_RT Debian 6.1.99-1 (2024-07-15) machine -m: x86_64 processor -p: unknown platform -i: unknown oper system -o: GNU/Linux /proc items: cmdline: BOOT_IMAGE=/boot/vmlinuz-6.1.0-23-rt-amd64 root=UUID=8fe0d254-2485-41c9-9b0f-aa9908b8e450 ro quiet model name: Intel(R) Celeron(R) J4125 CPU @ 2.00GHz cores: 4 cpu MHz: 2595.855 parport: serial: Versions: gcc: gcc (Debian 12.2.0-14) 12.2.0 python: Python 3.11.2 git: git version 2.39.5 git commit: NA tcl: 8.6 tk: 8.6 glade: not_in_PATH linuxcnc_var all: LINUXCNCVERSION: 2.9.3 LINUXCNC_AUX_GLADEVCP: /usr/share/linuxcnc/aux_gladevcp LINUXCNC_AUX_EXAMPLES: /usr/share/linuxcnc/aux_examples REALTIME: /usr/lib/linuxcnc/realtime RTS: uspace HALLIB_DIR: /usr/share/linuxcnc/hallib PYTHON: /usr/bin/python3 dpkg -l '*linuxcnc*': Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Architecture Description +++-===================-=================-============-===================================================================== un linuxcnc (no description available) un linuxcnc-dev (no description available) un linuxcnc-doc (no description available) ii linuxcnc-doc-de 1:2.9.3 all motion controller for CNC machines and robots (German documentation) ii linuxcnc-doc-en 1:2.9.3 all motion controller for CNC machines and robots (English documentation) ii linuxcnc-doc-es 1:2.9.3 all motion controller for CNC machines and robots (Spanish documentation) ii linuxcnc-doc-fr 1:2.9.3 all motion controller for CNC machines and robots (French documentation) ii linuxcnc-ethercat 1.40.0.g8a607c0-0 amd64 LinuxCNC EtherCAT HAL driver un linuxcnc-sim (no description available) un linuxcnc-sim-dev (no description available) ii linuxcnc-uspace 1:2.9.3 amd64 motion controller for CNC machines and robots ii linuxcnc-uspace-dev 1:2.9.3 amd64 PC based motion controller for real-time Linux