RUN_IN_PLACE=no
LINUXCNC_DIR=
LINUXCNC_BIN_DIR=/usr/bin
LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc
LINUXCNC_SCRIPT_DIR=
LINUXCNC_RTLIB_DIR=/usr/lib/linuxcnc/modules
LINUXCNC_CONFIG_DIR=
LINUXCNC_LANG_DIR=/usr/lib/tcltk/linuxcnc/msgs
INIVAR=inivar
HALCMD=halcmd
LINUXCNC_EMCSH=/usr/bin/wish8.6
INIFILE=/home/dylan/linuxcnc/configs/hackbot_srt/hackbot_srt.ini
VERSION=1.1
PARAMETER_FILE=xyzab-srt.var
TPMOD=
HOMEMOD=
TASK=milltask
HALUI=halui
DISPLAY=axis
COORDINATES=XYZABC
KINEMATICS=xyzab_srt
Starting LinuxCNC server program: linuxcncsvr
Loading Real Time OS, RTAPI, and HAL_LIB modules
Starting LinuxCNC IO program: io
Starting HAL User Interface program: halui
Starting TASK program: milltask
Running HAL command: net :kinstype-select <= motion.analog-out-03 => motion.switchkins-type
Running HAL command: net  :tool-offset     motion.tooloffset.z          xyzab_srt_kins.tool-offset-z
Running HAL command: net  :pivot-y                                      xyzab_srt_kins.y-pivot
Running HAL command: net  :pivot-z                                      xyzab_srt_kins.z-pivot
Running HAL command: net  :offset-x                                     xyzab_srt_kins.x-offset
Running HAL command: net  :offset-z                                     xyzab_srt_kins.z-offset
Running HAL command: sets :pivot-y      0
Running HAL command: sets :pivot-z      100
Running HAL command: sets :offset-x     0
Running HAL command: sets :offset-z     0
Starting DISPLAY program: axis
Removing HAL_LIB, RTAPI, and Real Time OS modules
Removing NML shared memory segments