Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1)

vfdmod: reading 'spindle.rpm-out' from address 12289 (0x3001)...
halcmd: [01][03][30][01][00][01][DA][CA]
Waiting for a confirmation...
<01><03><02><00><00><B8><44>
vfdmod: returned value is 0 (0x0000)

vfdmod: reading 'parameters.MainLineVoltage' from address 12290 (0x3002)...
[01][03][30][02][00][01][2A][CA]
Waiting for a confirmation...
<01><03><02><00><00><B8><44>
vfdmod: returned value is 0 (0x0000)

vfdmod: reading 'parameters.OutputCurent' from address 12292 (0x3004)...
[01][03][30][04][00][01][CA][CB]
Waiting for a confirmation...
<01><03><02><00><00><B8><44>
vfdmod: returned value is 0 (0x0000)

vfdmod: reading 'parameters.OutputPower' from address 12294 (0x3006)...
[01][03][30][06][00][01][6B][0B]
Waiting for a confirmation...
<01><03><02><00><00><B8><44>
vfdmod: returned value is 0 (0x0000)

vfdmod: reading 'parameters.OutputTorque' from address 12295 (0x3007)...
[01][03][30][07][00][01][3A][CB]
Waiting for a confirmation...
<01><03><02><01><46><38><26>
vfdmod: returned value is 326 (0x0146)

vfdmod: reading 'parameters.OutputVoltage' from address 12291 (0x3003)...
[01][03][30][03][00][01][7B][0A]
Waiting for a confirmation...
<01><03><02><00><00><B8><44>
vfdmod: returned value is 0 (0x0000)

vfdmod: reading 'parameters.P00.00' from address 0 (0x0000)...
[01][03][00][00][00][01][84][0A]
Waiting for a confirmation...
<01><03><02><00><01><79><84>
vfdmod: returned value is 1 (0x0001)

vfdmod: reading 'parameters.P00.01' from address 1 (0x0001)...
[01][03][00][01][00][01][D5][CA]
Waiting for a confirmation...
<01><03><02><00><07><F9><86>
vfdmod: returned value is 7 (0x0007)

vfdmod: reading 'parameters.P00.02' from address 2 (0x0002)...
[01][03][00][02][00][01][25][CA]
Waiting for a confirmation...
<01><03><02><00><02><39><85>
vfdmod: returned value is 2 (0x0002)

vfdmod: reading 'parameters.TargetFrequency' from address 12288 (0x3000)...
[01][03][30][00][00][01][8B][0A]
Waiting for a confirmation...
<01><03><02><0A><69><7E><CA>
vfdmod: returned value is 2665 (0x0A69)

vfdmod: setting command speed value to 666 (0x029A)...
[01][06][20][00][02][9A][03][01]
Waiting for a confirmation...
<01><06><20><00><02><9A><03><01>

vfdmod: setting control word value to 5 (0x0005)...
[01][06][10][00][00][05][4D][09]
Waiting for a confirmation...
<01><06><10><00><00><05><4D><09>

vfdmod: reading 'spindle.rpm-out' from address 12289 (0x3001)...
[01][03][30][01][00][01][DA][CA]
Waiting for a confirmation...
<01><03><02><00><00><B8><44>
vfdmod: returned value is 0 (0x0000)

vfdmod: reading 'parameters.MainLineVoltage' from address 12290 (0x3002)...
[01][03][30][02][00][01][2A][CA]
Waiting for a confirmation...
<01><03><02><00><00><B8><44>
vfdmod: returned value is 0 (0x0000)

vfdmod: reading 'parameters.OutputCurent' from address 12292 (0x3004)...
[01][03][30][04][00][01][CA][CB]
Waiting for a confirmation...
<01><03><02><00><00><B8><44>
vfdmod: returned value is 0 (0x0000)

vfdmod: reading 'parameters.OutputPower' from address 12294 (0x3006)...
[01][03][30][06][00][01][6B][0B]
Waiting for a confirmation...
<01><03><02><00><00><B8><44>
vfdmod: returned value is 0 (0x0000)

vfdmod: reading 'parameters.OutputTorque' from address 12295 (0x3007)...
[01][03][30][07][00][01][3A][CB]
Waiting for a confirmation...
<01><03><02><01><46><38><26>
vfdmod: returned value is 326 (0x0146)

vfdmod: reading 'parameters.OutputVoltage' from address 12291 (0x3003)...
[01][03][30][03][00][01][7B][0A]
Waiting for a confirmation...
<01><03><02><00><00><B8><44>
vfdmod: returned value is 0 (0x0000)