2688
  PID TTY      STAT   TIME COMMAND
2715
  PID TTY      STAT   TIME COMMAND
 2715 pts/0    S+     0:00 milltask -ini /home/linuxcnc/linuxcnc/configs/by_interface.parport.stepper/stepper_mm.ini
  PID TTY      STAT   TIME COMMAND
 2715 pts/0    S+     0:00 milltask -ini /home/linuxcnc/linuxcnc/configs/by_interface.parport.stepper/stepper_mm.ini
  PID TTY      STAT   TIME COMMAND
 2715 pts/0    S+     0:00 milltask -ini /home/linuxcnc/linuxcnc/configs/by_interface.parport.stepper/stepper_mm.ini
  PID TTY      STAT   TIME COMMAND
 2715 pts/0    S+     0:00 milltask -ini /home/linuxcnc/linuxcnc/configs/by_interface.parport.stepper/stepper_mm.ini
  PID TTY      STAT   TIME COMMAND
 2715 pts/0    S+     0:00 milltask -ini /home/linuxcnc/linuxcnc/configs/by_interface.parport.stepper/stepper_mm.ini
  PID TTY      STAT   TIME COMMAND
 2715 pts/0    S+     0:00 milltask -ini /home/linuxcnc/linuxcnc/configs/by_interface.parport.stepper/stepper_mm.ini
  PID TTY      STAT   TIME COMMAND
 2715 pts/0    S+     0:00 milltask -ini /home/linuxcnc/linuxcnc/configs/by_interface.parport.stepper/stepper_mm.ini
  PID TTY      STAT   TIME COMMAND
 2715 pts/0    S+     0:00 milltask -ini /home/linuxcnc/linuxcnc/configs/by_interface.parport.stepper/stepper_mm.ini
  PID TTY      STAT   TIME COMMAND
 2715 pts/0    S+     0:00 milltask -ini /home/linuxcnc/linuxcnc/configs/by_interface.parport.stepper/stepper_mm.ini
  PID TTY      STAT   TIME COMMAND
 2715 pts/0    S+     0:01 milltask -ini /home/linuxcnc/linuxcnc/configs/by_interface.parport.stepper/stepper_mm.ini
  PID TTY      STAT   TIME COMMAND
 2715 pts/0    S+     0:01 milltask -ini /home/linuxcnc/linuxcnc/configs/by_interface.parport.stepper/stepper_mm.ini
  PID TTY      STAT   TIME COMMAND
 2715 pts/0    S+     0:01 milltask -ini /home/linuxcnc/linuxcnc/configs/by_interface.parport.stepper/stepper_mm.ini
  PID TTY      STAT   TIME COMMAND
 2715 pts/0    S+     0:01 milltask -ini /home/linuxcnc/linuxcnc/configs/by_interface.parport.stepper/stepper_mm.ini
  PID TTY      STAT   TIME COMMAND
 2715 pts/0    S+     0:01 milltask -ini /home/linuxcnc/linuxcnc/configs/by_interface.parport.stepper/stepper_mm.ini
  PID TTY      STAT   TIME COMMAND
 2715 pts/0    S+     0:01 milltask -ini /home/linuxcnc/linuxcnc/configs/by_interface.parport.stepper/stepper_mm.ini
  PID TTY      STAT   TIME COMMAND
 2715 pts/0    S+     0:01 milltask -ini /home/linuxcnc/linuxcnc/configs/by_interface.parport.stepper/stepper_mm.ini
  PID TTY      STAT   TIME COMMAND
 2715 pts/0    S+     0:01 milltask -ini /home/linuxcnc/linuxcnc/configs/by_interface.parport.stepper/stepper_mm.ini
  PID TTY      STAT   TIME COMMAND
 2715 pts/0    S+     0:01 milltask -ini /home/linuxcnc/linuxcnc/configs/by_interface.parport.stepper/stepper_mm.ini
  PID TTY      STAT   TIME COMMAND
 2715 pts/0    S+     0:01 milltask -ini /home/linuxcnc/linuxcnc/configs/by_interface.parport.stepper/stepper_mm.ini
  PID TTY      STAT   TIME COMMAND
Stopping realtime threads
Unloading hal components