Error report created by /usr/lib/tcltk/linuxcnc/show_errors.tcl: Print file information: RUN_IN_PLACE=no LINUXCNC_DIR= LINUXCNC_BIN_DIR=/usr/bin LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc LINUXCNC_SCRIPT_DIR= LINUXCNC_RTLIB_DIR=/usr/lib/linuxcnc/modules LINUXCNC_CONFIG_DIR= LINUXCNC_LANG_DIR=/usr/lib/tcltk/linuxcnc/msgs INIVAR=inivar HALCMD=halcmd LINUXCNC_EMCSH=/usr/bin/wish8.6 LINUXCNC - 2.9.0~pre1+git20230208.f1270d6ed7 Machine configuration directory is '/home/cnc/linuxcnc/configs/test1' Machine configuration file is 'test1.ini' INIFILE=/home/cnc/linuxcnc/configs/test1/test1.ini VERSION=1.1 PARAMETER_FILE=parameters.var TPMOD= HOMEMOD= TASK=milltask HALUI= DISPLAY=gmoccapy COORDINATES=XYZ KINEMATICS=trivkins coordinates=XYZ Starting LinuxCNC... Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Starting LinuxCNC IO program: iov2 linuxcnc TPMOD=tpmod HOMEMOD=homemod EMCMOT=motmod Found file(REL): ./main.hal hm2: loading Mesa HostMot2 driver version 0.15 hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.2 hm2_eth: 10.10.10.10: INFO: Hardware address (MAC): 00:60:1b:15:80:0f hm2_eth: Unrecognized ethernet board found: 7I95T -- port names will be wrong hm2_eth: discovered 7I95T hm2/hm2_7i95.0: Low Level init 0.15 hm2/hm2_7i95.0: Smart Serial Firmware Version 43 Board hm2_7i95.0.7i83.0.1 Hardware Mode 0 = standard Board hm2_7i95.0.7i83.0.1 Software Mode 0 = analogout_enables hm2/hm2_7i95.0: 58 I/O Pins used: hm2/hm2_7i95.0: IO Pin 000 (??-01): StepGen #0, pin Step (Output) hm2/hm2_7i95.0: IO Pin 001 (??-02): StepGen #0, pin Direction (Output) hm2/hm2_7i95.0: IO Pin 002 (??-03): StepGen #1, pin Step (Output) hm2/hm2_7i95.0: IO Pin 003 (??-04): StepGen #1, pin Direction (Output) hm2/hm2_7i95.0: IO Pin 004 (??-05): StepGen #2, pin Step (Output) hm2/hm2_7i95.0: IO Pin 005 (??-06): StepGen #2, pin Direction (Output) hm2/hm2_7i95.0: IO Pin 006 (??-07): StepGen #3, pin Step (Output) hm2/hm2_7i95.0: IO Pin 007 (??-08): StepGen #3, pin Direction (Output) hm2/hm2_7i95.0: IO Pin 008 (??-09): StepGen #4, pin Step (Output) hm2/hm2_7i95.0: IO Pin 009 (??-10): StepGen #4, pin Direction (Output) hm2/hm2_7i95.0: IO Pin 010 (??-11): StepGen #5, pin Step (Output) hm2/hm2_7i95.0: IO Pin 011 (??-12): StepGen #5, pin Direction (Output) hm2/hm2_7i95.0: IO Pin 012 (??-13): IOPort hm2/hm2_7i95.0: IO Pin 013 (??-14): IOPort hm2/hm2_7i95.0: IO Pin 014 (??-15): IOPort hm2/hm2_7i95.0: IO Pin 015 (??-16): Smart Serial Interface #0, pin rx1 (Input) hm2/hm2_7i95.0: IO Pin 016 (??-17): Smart Serial Interface #0, pin tx1 (Output) hm2/hm2_7i95.0: IO Pin 017 (??-18): Smart Serial Interface #0, pin txen1 (Output) hm2/hm2_7i95.0: IO Pin 018 (??-19): Muxed Encoder #0, pin Muxed A (Input) hm2/hm2_7i95.0: IO Pin 019 (??-20): Muxed Encoder #0, pin Muxed B (Input) hm2/hm2_7i95.0: IO Pin 020 (??-21): Muxed Encoder #0, pin Muxed Index (Input) hm2/hm2_7i95.0: IO Pin 021 (??-22): Muxed Encoder #1, pin Muxed A (Input) hm2/hm2_7i95.0: IO Pin 022 (??-23): Muxed Encoder #1, pin Muxed B (Input) hm2/hm2_7i95.0: IO Pin 023 (??-24): Muxed Encoder #1, pin Muxed Index (Input) hm2/hm2_7i95.0: IO Pin 024 (??-25): Muxed Encoder #2, pin Muxed A (Input) hm2/hm2_7i95.0: IO Pin 025 (??-26): Muxed Encoder #2, pin Muxed B (Input) hm2/hm2_7i95.0: IO Pin 026 (??-27): Muxed Encoder #2, pin Muxed Index (Input) hm2/hm2_7i95.0: IO Pin 027 (??-28): Muxed Encoder Select #0, pin Mux Select 0 (Output) hm2/hm2_7i95.0: IO Pin 028 (??-29): InMux Input Mux #0, pin addr0 (Output) hm2/hm2_7i95.0: IO Pin 029 (??-30): InMux Input Mux #0, pin addr1 (Output) hm2/hm2_7i95.0: IO Pin 030 (??-31): InMux Input Mux #0, pin addr2 (Output) hm2/hm2_7i95.0: IO Pin 031 (??-32): InMux Input Mux #0, pin addr3 (Output) hm2/hm2_7i95.0: IO Pin 032 (??-33): InMux Input Mux #0, pin addr4 (Output) hm2/hm2_7i95.0: IO Pin 033 (??-34): InMux Input Mux #0, pin muxdata (Input) hm2/hm2_7i95.0: IO Pin 034 (??-35): SSR #0, pin Out-00 (Output) hm2/hm2_7i95.0: IO Pin 035 (??-36): SSR #0, pin Out-01 (Output) hm2/hm2_7i95.0: IO Pin 036 (??-37): SSR #0, pin Out-02 (Output) hm2/hm2_7i95.0: IO Pin 037 (??-38): SSR #0, pin Out-03 (Output) hm2/hm2_7i95.0: IO Pin 038 (??-39): SSR #0, pin Out-04 (Output) hm2/hm2_7i95.0: IO Pin 039 (??-40): SSR #0, pin Out-05 (Output) hm2/hm2_7i95.0: IO Pin 040 (??-41): SSR #0, pin AC Ref (internal) (Output) hm2/hm2_7i95.0: IO Pin 041 (??-42): IOPort hm2/hm2_7i95.0: IO Pin 042 (??-43): IOPort hm2/hm2_7i95.0: IO Pin 043 (??-44): IOPort hm2/hm2_7i95.0: IO Pin 044 (??-45): IOPort hm2/hm2_7i95.0: IO Pin 045 (??-46): IOPort hm2/hm2_7i95.0: IO Pin 046 (??-47): IOPort hm2/hm2_7i95.0: IO Pin 047 (??-48): IOPort hm2/hm2_7i95.0: IO Pin 048 (??-49): IOPort hm2/hm2_7i95.0: IO Pin 049 (??-50): IOPort hm2/hm2_7i95.0: IO Pin 050 (??-51): IOPort hm2/hm2_7i95.0: IO Pin 051 (??-52): IOPort hm2/hm2_7i95.0: IO Pin 0Shutting down and cleaning up LinuxCNC... iov2: exiting 52 (??-53): IOPort hm2/hm2_7i95.0: IO Pin 053 (??-54): IOPort hm2/hm2_7i95.0: IO Pin 054 (??-55): IOPort hm2/hm2_7i95.0: IO Pin 055 (??-56): IOPort hm2/hm2_7i95.0: IO Pin 056 (??-57): IOPort hm2/hm2_7i95.0: IO Pin 057 (??-58): IOPort hm2/hm2_7i95.0: registered hm2_eth: in hm2_eth_reset hm2_eth: HostMot2 ethernet driver unloaded hm2: unloading Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments Debug file information: Note: Using POSIX realtime ./main.hal:53: parameter or pin 'hm2_7i95.0.7i83.0.0.analogout1-scalemax' not found 6965 Stopping realtime threads Unloading hal components Note: Using POSIX realtime ----------------------------------------------------------------------- Info report created by linuxcnc_info: The file: /tmp/linuxcnc_info.txt can be posted to a forum or a web site like: http://pastebin.com in order to provide information about the linuxcnc system and configuration. Date: Sun Dec 10 09:13:14 AM EST 2023 UTC Date: Sun Dec 10 02:13:14 PM UTC 2023 this program: /usr/bin/linuxcnc_info uptime: 09:13:14 up 6 days, 18:42, 1 user, load average: 2.50, 1.75, 1.19 lsb_release -sa: Debian Debian GNU/Linux 12 (bookworm) 12 bookworm linuxcnc: /usr/bin/linuxcnc pwd: /home/cnc/linuxcnc/configs/test1 USER: cnc LOGNAME: cnc HOME: /home/cnc EDITOR: VISUAL: LANGUAGE: TERM: dumb COLORTERM: DISPLAY: :1 DESKTOP: plasmawayland display size: 1920x1080 pixels (508x286 millimeters) PATH: /usr/bin:/home/cnc/linuxcnc/configs/test1/bin:/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games uname items: nodename -n: CNC kernel-name -s: Linux kernel-vers -v: #1 SMP PREEMPT_RT Debian 6.1.38-3 (2023-08-07) machine -m: x86_64 processor -p: unknown platform -i: unknown oper system -o: GNU/Linux /proc items: cmdline: BOOT_IMAGE=/boot/vmlinuz-6.1.0-11-rt-amd64 root=UUID=ee501371-2798-435e-b06b-aaf9b312855d ro quiet model name: Intel(R) Core(TM) i5-6500T CPU @ 2.50GHz cores: 4 cpu MHz: 900.021 parport: serial: 0000-0000 : serial 0000-0000 : serial Versions: gcc: gcc (Debian 12.2.0-14) 12.2.0 python: Python 3.11.2 git: git version 2.39.2 git commit: NA tcl: 8.6 tk: 8.6 glade: not_in_PATH linuxcnc_var all: LINUXCNCVERSION: 2.9.0~pre1+git20230208.f1270d6ed7 LINUXCNC_AUX_GLADEVCP: /usr/share/linuxcnc/aux_gladevcp LINUXCNC_AUX_EXAMPLES: /usr/share/linuxcnc/aux_examples REALTIME: /usr/lib/linuxcnc/realtime RTS: uspace HALLIB_DIR: /usr/share/linuxcnc/hallib PYTHON: /usr/bin/python3 dpkg -l '*linuxcnc*': Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Architecture Description +++-===================-===================================-============-===================================================================== un linuxcnc (no description available) un linuxcnc-dev (no description available) un linuxcnc-doc (no description available) ii linuxcnc-doc-en 2.9.0~pre1+git20230208.f1270d6ed7-1 all motion controller for CNC machines and robots (English documentation) un linuxcnc-doc-es (no description available) un linuxcnc-doc-fr (no description available) un linuxcnc-sim (no description available) un linuxcnc-sim-dev (no description available) ii linuxcnc-uspace 2.9.0~pre1+git20230208.f1270d6ed7-1 amd64 motion controller for CNC machines and robots ii linuxcnc-uspace-dev 2.9.0~pre1+git20230208.f1270d6ed7-1 amd64 PC based motion controller for real-time Linux