Error report created by /usr/lib/tcltk/linuxcnc/show_errors.tcl: Print file information: RUN_IN_PLACE=no LINUXCNC_DIR= LINUXCNC_BIN_DIR=/usr/bin LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc LINUXCNC_SCRIPT_DIR= LINUXCNC_RTLIB_DIR=/usr/lib/linuxcnc/modules LINUXCNC_CONFIG_DIR= LINUXCNC_LANG_DIR=/usr/lib/tcltk/linuxcnc/msgs INIVAR=inivar HALCMD=halcmd LINUXCNC_EMCSH=/usr/bin/wish8.6 LINUXCNC - 2.9.3 Machine configuration directory is '/home/cnc/linuxcnc/configs/7i95t_qtdragon' Machine configuration file is '7i95t_qtdragon.ini' INIFILE=/home/cnc/linuxcnc/configs/7i95t_qtdragon/7i95t_qtdragon.ini VERSION=1.1 PARAMETER_FILE=parameters.var TPMOD= HOMEMOD= TASK=milltask HALUI= DISPLAY=qtdragon COORDINATES=XYZ KINEMATICS=trivkins coordinates=XYZ Starting LinuxCNC... Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Starting LinuxCNC IO program: iov2 libnml/buffer/shmem.cc 320: Shared memory buffers toolCmd and toolCmd may conflict. (key=1004(0x3EC)) libnml/buffer/shmem.cc 320: Shared memory buffers toolSts and toolSts may conflict. (key=1005(0x3ED)) libnml/buffer/shmem.cc 320: Shared memory buffers emcError and emcError may conflict. (key=1003(0x3EB)) linuxcnc TPMOD=tpmod HOMEMOD=homemod EMCMOT=motmod Found file(REL): ./main.hal Found file(REL): ./io.hal Starting TASK program: milltask Starting DISPLAY program: qtdragon Can't execute DISPLAY program qtdragon Shutting down and cleaning up LinuxCNC... task: 27 cycles, min=0.000004, max=0.010671, avg=0.004817, 0 latency excursions (> 10x expected cycle time of 0.010000s) iov2: exiting hm2: loading Mesa HostMot2 driver version 0.15 hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.2 hm2_eth: 10.10.10.10: INFO: Hardware address (MAC): 00:60:1b:15:81:41 hm2_eth: discovered 7I95T hm2/hm2_7i95.0: Low Level init 0.15 hm2/hm2_7i95.0: Smart Serial Firmware Version 43 hm2/hm2_7i95.0: 58 I/O Pins used: hm2/hm2_7i95.0: IO Pin 000 (TB3-02/TB3-03): StepGen #0, pin Step (Output) hm2/hm2_7i95.0: IO Pin 001 (TB3-04/TB3-05): StepGen #0, pin Direction (Output) hm2/hm2_7i95.0: IO Pin 002 (TB3-08/TB3-09): StepGen #1, pin Step (Output) hm2/hm2_7i95.0: IO Pin 003 (TB3-10/TB3-11): StepGen #1, pin Direction (Output) hm2/hm2_7i95.0: IO Pin 004 (TB3-14/TB3-15): StepGen #2, pin Step (Output) hm2/hm2_7i95.0: IO Pin 005 (TB3-16/TB3-17): StepGen #2, pin Direction (Output) hm2/hm2_7i95.0: IO Pin 006 (TB3-20/TB3-21): StepGen #3, pin Step (Output) hm2/hm2_7i95.0: IO Pin 007 (TB3-22/TB3-23): StepGen #3, pin Direction (Output) hm2/hm2_7i95.0: IO Pin 008 (TB4-02/TB4-03): StepGen #4, pin Step (Output) hm2/hm2_7i95.0: IO Pin 009 (TB4-04/TB4-05): StepGen #4, pin Direction (Output) hm2/hm2_7i95.0: IO Pin 010 (TB4-08/TB4-09): StepGen #5, pin Step (Output) hm2/hm2_7i95.0: IO Pin 011 (TB4-10/TB4-11): StepGen #5, pin Direction (Output) hm2/hm2_7i95.0: IO Pin 012 (TB4-14/TB4-15): IOPort hm2/hm2_7i95.0: IO Pin 013 (TB4-16/TB4-17): IOPort hm2/hm2_7i95.0: IO Pin 014 (TB3-16/TB3-17): IOPort hm2/hm2_7i95.0: IO Pin 015 (TB4-20/TB4-21): IOPort hm2/hm2_7i95.0: IO Pin 016 (TB4-22/TB4-23): IOPort hm2/hm2_7i95.0: IO Pin 017 (TB4-22/TB4-23): IOPort hm2/hm2_7i95.0: IO Pin 018 (TB1-01/TB1-09): Muxed Encoder #0, pin Muxed A (Input) hm2/hm2_7i95.0: IO Pin 019 (TB1-04/TB1-12): Muxed Encoder #0, pin Muxed B (Input) hm2/hm2_7i95.0: IO Pin 020 (TB1-07/TB1-15): Muxed Encoder #0, pin Muxed Index (Input) hm2/hm2_7i95.0: IO Pin 021 (TB1-17/TB2-01): Muxed Encoder #1, pin Muxed A (Input) hm2/hm2_7i95.0: IO Pin 022 (TB1-20/TB2-04): Muxed Encoder #1, pin Muxed B (Input) hm2/hm2_7i95.0: IO Pin 023 (TB1-23/TB2-07): Muxed Encoder #1, pin Muxed Index (Input) hm2/hm2_7i95.0: IO Pin 024 (TB2-09/TB2-17): Muxed Encoder #2, pin Muxed A (Input) hm2/hm2_7i95.0: IO Pin 025 (TB2-12/TB2-20): Muxed Encoder #2, pin Muxed B (Input) hm2/hm2_7i95.0: IO Pin 026 (TB2-15/TB2-23): Muxed Encoder #2, pin Muxed Index (Input) hm2/hm2_7i95.0: IO Pin 027 (Internal EncMux): Muxed Encoder Select #0, pin Mux Select 0 (Output) hm2/hm2_7i95.0: IO Pin 028 (Internal InMux0): InMux Input Mux #0, pin addr0 (Output) hm2/hm2_7i95.0: IO Pin 029 (Internal InMux1): InMux Input Mux #0, pin addr1 (Output) hm2/hm2_7i95.0: IO Pin 030 (Internal InMux2): InMux Input Mux #0, pin addr2 (Output) hm2/hm2_7i95.0: IO Pin 031 (Internal InMux3): InMux Input Mux #0, pin addr3 (Output) hm2/hm2_7i95.0: IO Pin 032 (Internal InMux4): InMux Input Mux #0, pin addr4 (Output) hm2/hm2_7i95.0: IO Pin 033 (Internal InMuxData): InMux Input Mux #0, pin muxdata (Input) hm2/hm2_7i95.0: IO Pin 034 (TB5-13/TB5-14): SSR #0, pin Out-00 (Output) hm2/hm2_7i95.0: IO Pin 035 (TB5-15/TB5-16): SSR #0, pin Out-01 (Output) hm2/hm2_7i95.0: IO Pin 036 (TB5-17/TB5-18): SSR #0, pin Out-02 (Output) hm2/hm2_7i95.0: IO Pin 037 (TB5-19/TB5-20): SSR #0, pin Out-03 (Output) hm2/hm2_7i95.0: IO Pin 038 (TB5-21/TB5-22): SSR #0, pin Out-04 (Output) hm2/hm2_7i95.0: IO Pin 039 (TB5-23/TB5-24): SSR #0, pin Out-05 (Output) hm2/hm2_7i95.0: IO Pin 040 (internal): SSR #0, pin AC Ref (internal) (Output) hm2/hm2_7i95.0: IO Pin 041 (P1-01/DB25-01): IOPort hm2/hm2_7i95.0: IO Pin 042 (P1-02/DB25-14): IOPort hm2/hm2_7i95.0: IO Pin 043 (P1-03/DB25-02): IOPort hm2/hm2_7i95.0: IO Pin 044 (P1-04/DB25-15): IOPort hm2/hm2_7i95.0: IO Pin 045 (P1-05/DB25-03): IOPort hm2/hm2_7i95.0: IO Pin 046 (P1-06/DB25-16): IOPort hm2/hm2_7i95.0: IO Pin 047 (P1-07/DB25-04): IOPort hm2/hm2_7i95.0: IO Pin 048 (P1-08/DB25-17): IOPort hm2/hm2_7i95.0: IO Pin 049 (P1-09/DB25-05): IOPort hm2/hm2_7i95.0: IO Pin 050 (P1-11/DB25-06): IOPort hm2/hm2_7i95.0: IO Pin 051 (P1-13/DB25-07): IOPort hm2/hm2_7i95.0: IO Pin 052 (P1-15/DB25-08): IOPort hm2/hm2_7i95.0: IO Pin 053 (P1-17/DB25-09): IOPort hm2/hm2_7i95.0: IO Pin 054 (P1-19/DB25-10): IOPort hm2/hm2_7i95.0: IO Pin 055 (P1-21/DB25-11): IOPort hm2/hm2_7i95.0: IO Pin 056 (P1-23/DB25-12): IOPort hm2/hm2_7i95.0: IO Pin 057 (P1-25/DB25-13): IOPort hm2/hm2_7i95.0: registered hm2_eth: in hm2_eth_reset hm2_eth: HostMot2 ethernet driver unloaded hm2: unloading Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments Debug file information: Note: Using POSIX realtime 65119 65164 Stopping realtime threads Unloading hal components Note: Using POSIX realtime ----------------------------------------------------------------------- Info report created by linuxcnc_info: The file: /tmp/linuxcnc_info.txt can be posted to a forum or a web site like: http://pastebin.com in order to provide information about the linuxcnc system and configuration. Date: Thu Dec 26 11:06:22 CST 2024 UTC Date: Thu Dec 26 17:06:22 UTC 2024 this program: /usr/bin/linuxcnc_info uptime: 11:06:22 up 4 days, 6:36, 2 users, load average: 0.43, 0.50, 0.50 lsb_release -sa: Debian Debian GNU/Linux 12 (bookworm) 12 bookworm linuxcnc: /usr/bin/linuxcnc pwd: /home/cnc/linuxcnc/configs/7i95t_qtdragon USER: cnc LOGNAME: cnc HOME: /home/cnc EDITOR: VISUAL: LANGUAGE: TERM: dumb COLORTERM: DISPLAY: :0.0 DESKTOP: lightdm-xsession display size: 1920x1080 pixels (508x285 millimeters) PATH: /usr/bin:/home/cnc/linuxcnc/configs/7i95t_qtdragon/bin:/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games uname items: nodename -n: cncpi kernel-name -s: Linux kernel-vers -v: #1 SMP PREEMPT_RT Sun Oct 6 11:04:42 NZDT 2024 machine -m: aarch64 processor -p: unknown platform -i: unknown oper system -o: GNU/Linux /proc items: cmdline: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe smsc95xx.macaddr=2C:CF:67:5E:BD:23 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=2fee646d-02 rootfstype=ext4 fsck.repair=yes loglevel=5 processor.max_cstate=1 isolcpus=2,3 firmware_class.path=/lib/firmware/updates/brcm rootwait cfg80211.ieee80211_regdom=US model name: cores: cpu MHz: parport: serial: Versions: gcc: gcc (Debian 12.2.0-14) 12.2.0 python: Python 3.11.2 git: git version 2.39.5 git commit: NA tcl: 8.6 tk: 8.6 glade: not_in_PATH linuxcnc_var all: LINUXCNCVERSION: 2.9.3 LINUXCNC_AUX_GLADEVCP: /usr/share/linuxcnc/aux_gladevcp LINUXCNC_AUX_EXAMPLES: /usr/share/linuxcnc/aux_examples REALTIME: /usr/lib/linuxcnc/realtime RTS: uspace HALLIB_DIR: /usr/share/linuxcnc/hallib PYTHON: /usr/bin/python3 dpkg -l '*linuxcnc*': Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Architecture Description +++-===================-============-============-===================================================================== un linuxcnc (no description available) un linuxcnc-dev (no description available) un linuxcnc-doc (no description available) ii linuxcnc-doc-en 1:2.9.3 all motion controller for CNC machines and robots (English documentation) un linuxcnc-doc-es (no description available) un linuxcnc-doc-fr (no description available) un linuxcnc-sim (no description available) un linuxcnc-sim-dev (no description available) ii linuxcnc-uspace 1:2.9.3 arm64 motion controller for CNC machines and robots ii linuxcnc-uspace-dev 1:2.9.3 arm64 PC based motion controller for real-time Linux