Error report created by /usr/lib/tcltk/linuxcnc/show_errors.tcl: Print file information: RUN_IN_PLACE=no LINUXCNC_DIR= LINUXCNC_BIN_DIR=/usr/bin LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc LINUXCNC_SCRIPT_DIR= LINUXCNC_RTLIB_DIR=/usr/lib/linuxcnc/modules LINUXCNC_CONFIG_DIR= LINUXCNC_LANG_DIR=/usr/lib/tcltk/linuxcnc/msgs INIVAR=inivar HALCMD=halcmd LINUXCNC_EMCSH=/usr/bin/wish8.6 LINUXCNC - 2.9.3 Machine configuration directory is '/home/andrew/linuxcnc/configs/pm728_7i96s_7i85s_7i73_xyz_mill_PB' Machine configuration file is 'pm728_7i96s_7i85s_7i73_xyz_mill_pb.ini' INIFILE=/home/andrew/linuxcnc/configs/pm728_7i96s_7i85s_7i73_xyz_mill_PB/pm728_7i96s_7i85s_7i73_xyz_mill_pb.ini VERSION=1.1 PARAMETER_FILE=sim.var TPMOD= HOMEMOD= TASK=milltask HALUI= DISPLAY=probe_basic COORDINATES=XYZ KINEMATICS=trivkins coordinates=XYZ Starting LinuxCNC... Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Starting LinuxCNC IO program: iov2 libnml/buffer/shmem.cc 320: Shared memory buffers toolCmd and toolCmd may conflict. (key=1004(0x3EC)) libnml/buffer/shmem.cc 320: Shared memory buffers toolSts and toolSts may conflict. (key=1005(0x3ED)) libnml/buffer/shmem.cc 320: Shared memory buffers emcError and emcError may conflict. (key=1003(0x3EB)) linuxcnc TPMOD=tpmod HOMEMOD=homemod EMCMOT=motmod twopass:invoked with <> options twopass:found ./main.hal hm2: loading Mesa HostMot2 driver version 0.15 hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.2 hm2_eth: 10.10.10.10: INFO: Hardware address (MAC): 00:60:1b:16:8d:43 hm2_eth: discovered 7I96S hm2/hm2_7i96s.0: Low Level init 0.15 hm2/hm2_7i96s.0: Smart Serial Firmware Version 43 Board hm2_7i96s.0.7i73.0.0 Hardware Mode 0 = nokeyboardnodisplay Board hm2_7i96s.0.7i73.0.0 Software Mode 0 = inputoutputencoder Board hm2_7i96s.0.7i73.0.0 Software Mode 1 = inputoutputencoderanalog Board hm2_7i96s.0.7i73.0.0 Software Mode 2 = inputoutputencoderanalog Board hm2_7i96s.0.7i73.0.0 Hardware Mode 1 = nokeyboarddisplay Board hm2_7i96s.0.7i73.0.0 Software Mode 0 = inputoutputencoderdisplay Board hm2_7i96s.0.7i73.0.0 Software Mode 1 = inputoutputencoderanalogdisplay Board hm2_7i96s.0.7i73.0.0 Software Mode 2 = inputoutputencoderanalogwidedisplay Board hm2_7i96s.0.7i73.0.0 Hardware Mode 2 = keyboard4by8nodisplay Board hm2_7i96s.0.7i73.0.0 Software Mode 0 = inputoutputencoderkeycode4by8 Board hm2_7i96s.0.7i73.0.0 Software Mode 1 = inputoutputencoderanalogkeycode4by8 Board hm2_7i96s.0.7i73.0.0 Software Mode 2 = inputoutputencoderanalogkeycode4by8 Board hm2_7i96s.0.7i73.0.0 Hardware Mode 3 = keyboard4by8display Board hm2_7i96s.0.7i73.0.0 Software Mode 0 = inputoutputencoderdisplaykeycode4by8 Board hm2_7i96s.0.7i73.0.0 Software Mode 1 = inputoutputencoderanalogdisplaykeycode4by8 Board hm2_7i96s.0.7i73.0.0 Software Mode 2 = inputoutputencoderanalogwidedisplaykeycode4by8 Board hm2_7i96s.0.7i73.0.0 Hardware Mode 4 = keyboard8by8nodisplay Board hm2_7i96s.0.7i73.0.0 Software Mode 0 = inputoutputencoderkeycode8by8 Board hm2_7i96s.0.7i73.0.0 Software Mode 1 = inputoutputencoderanalogkeycode8by8 Board hm2_7i96s.0.7i73.0.0 Software Mode 2 = inputoutputencoderanalogkeycode8by8 Board hm2_7i96s.0.7i73.0.0 Hardware Mode 5 = keyboard8by8display Board hm2_7i96s.0.7i73.0.0 Software Mode 0 = inputoutputencoderdisplaykeycode8by8 Board hm2_7i96s.0.7i73.0.0 Software Mode 1 = inputoutputencoderanalogdisplaykeycode8by8 Board hm2_7i96s.0.7i73.0.0 Software Mode 2 = inputoutputencoderanalogwidedisplaykeycode8by8 hm2/hm2_7i96s.0: 51 I/O Pins used: hm2/hm2_7i96s.0: IO Pin 000 (TB3-01): InM Input Module #0, pin in0 (Input) hm2/hm2_7i96s.0: IO Pin 001 (TB3-02): InM Input Module #0, pin in1 (Input) hm2/hm2_7i96s.0: IO Pin 002 (TB3-03): InM Input Module #0, pin in2 (Input) hm2/hm2_7i96s.0: IO Pin 003 (TB3-04): InM Input Module #0, pin in3 (Input) hm2/hm2_7i96s.0: IO Pin 004 (TB3-05): InM Input Module #0, pin in4 (Input) hm2/hm2_7i96s.0: IO Pin 005 (TB3-06): InM Input Module #0, pin in5 (Input) hm2/hm2_7i96s.0: IO Pin 006 (TB3-07): InM Input Module #0, pin in6 (Input) hm2/hm2_7i96s.0: IO Pin 007 (TB3-08): InM Input Module #0, pin in7 (Input) hm2/hm2_7i96s.0: IO Pin 008 (TB3-09): InM Input Module #0, pin in8 (Input) hm2/hm2_7i96s.0: IO Pin 009 (TB3-10): InM Input Module #0, pin in9 (Input) hm2/hm2_7i96s.0: IO Pin 010 (TB3-11): InM Input Module #0, pin in10 (Input) hm2/hm2_7i96s.0: IO Pin 011 (TB3-13/TB3-14): SSR #0, pin Out-00 (Output) hm2/hm2_7i96s.0: IO Pin 012 (TB3-15/TB3-16): SSR #0, pin Out-01 (Output) hm2/hm2_7i96s.0: IO Pin 013 (TB3-17/TB3-18): SSR #0, pin Out-02 (Output) hm2/hm2_7i96s.0: IO Pin 014 (TB3-19/TB3-20): SSR #0, pin Out-03 (Output) hm2/hm2_7i96s.0: IO Pin 015 (TB3-21/TB3-22): OutM Output Module #0, pin Out-04 (Output) hm2/hm2_7i96s.0: IO Pin 016 (TB3-23/TB3-24): OutM Output Module #0, pin Out-05 (Output) hm2/hm2_7i96s.0: IO Pin 017 (TB1-02/TB1-03): StepGen #0, pin Step (Output) hm2/hm2_7i96s.0: IO Pin 018 (TB1-04/TB1-05): StepGen #0, pin Direction (Output) hm2/hm2_7i96s.0: IO Pin 019 (TB1-08/TB1-09): StepGen #1, pin Step (Output) hm2/hm2_7i96s.0: IO Pin 020 (TB1-10/TB1-11): StepGen #1, pin Direction (Output) hm2/hm2_7i96s.0: IO Pin 021 (TB1-14/TB1-15): StepGen #2, pin Step (Output) hm2/hm2_7i96s.0: IO Pin 022 (TB1-16/TB1-17): StepGen #2, pin Direction (Output) hm2/hm2_7i96s.0: IO Pin 023 (TB1-20/TB1-21): StepGen #3, pin Step (Output) hm2/hm2_7i96sStarting TASK program: milltask Starting DISPLAY program: probe_basic emcMotionInit: emcTrajInit failed emcMotionInit: emcTrajInit failed emcMotionInit: emcTrajInit failed emcMotionInit: emcTrajInit failed emcMotionInit: emcTrajInit failed emcMotionInit: emcTrajInit failed emcMotionInit: emcTrajInit failed emcMotionInit: emcTrajInit failed emcMotionInit: emcTrajInit failed emcMotionInit: emcTrajInit failed emc/task/emctaskmain.cc 3054: can't initialize motion ['X: Front View', 'Y: Front View', 'Z: Top View', 'Z2: Bottom View', 'P: Isometric'] ['X', 'Y', 'Z', 'Z2', 'P'] ['X: Front View', 'Y: Front View', 'Z: Top View', 'Z2: Bottom View', 'P: Isometric'] ['X', 'Y', 'Z', 'Z2', 'P'] 4 Shutting down and cleaning up LinuxCNC... iov2: exiting .0: IO Pin 024 (TB1-22-TB1-23): StepGen #3, pin Direction (Output) hm2/hm2_7i96s.0: IO Pin 025 (TB2-02/TB2-03): StepGen #4, pin Step (Output) hm2/hm2_7i96s.0: IO Pin 026 (TB2-04/TB2-05): StepGen #4, pin Direction (Output) hm2/hm2_7i96s.0: IO Pin 027 (TB2-07/TB2-08): Muxed Encoder #2, pin Muxed A (Input) hm2/hm2_7i96s.0: IO Pin 028 (TB2-10/TB2-11): Muxed Encoder #2, pin Muxed B (Input) hm2/hm2_7i96s.0: IO Pin 029 (TB2-13/TB2-14): Muxed Encoder #2, pin Muxed Index (Input) hm2/hm2_7i96s.0: IO Pin 030 (TB2-16/TB2-17): Smart Serial Interface #0, pin rx0 (Input) hm2/hm2_7i96s.0: IO Pin 031 (TB2-18/TB2-19): Smart Serial Interface #0, pin tx0 (Output) hm2/hm2_7i96s.0: IO Pin 032 (internal): Smart Serial Interface #0, pin txen0 (Output) hm2/hm2_7i96s.0: IO Pin 033 (internal): SSR #0, pin AC Ref (internal) (Output) hm2/hm2_7i96s.0: IO Pin 034 (P1-01/DB25-01): IOPort hm2/hm2_7i96s.0: IO Pin 035 (P1-02/DB25-14): IOPort hm2/hm2_7i96s.0: IO Pin 036 (P1-03/DB25-02): StepGen #8, pin Step (Output) hm2/hm2_7i96s.0: IO Pin 037 (P1-04/DB25-15): StepGen #8, pin Direction (Output) hm2/hm2_7i96s.0: IO Pin 038 (P1-05/DB25-03): StepGen #7, pin Step (Output) hm2/hm2_7i96s.0: IO Pin 039 (P1-06/DB25-16): StepGen #7, pin Direction (Output) hm2/hm2_7i96s.0: IO Pin 040 (P1-07/DB25-04): StepGen #6, pin Step (Output) hm2/hm2_7i96s.0: IO Pin 041 (P1-08/DB25-17): StepGen #6, pin Direction (Output) hm2/hm2_7i96s.0: IO Pin 042 (P1-09/DB25-05): StepGen #5, pin Step (Output) hm2/hm2_7i96s.0: IO Pin 043 (P1-11/DB25-06): StepGen #5, pin Direction (Output) hm2/hm2_7i96s.0: IO Pin 044 (P1-13/DB25-07): Muxed Encoder Select #0, pin Mux Select 0 (Output) hm2/hm2_7i96s.0: IO Pin 045 (P1-15/DB25-08): Muxed Encoder #0, pin Muxed A (Input) hm2/hm2_7i96s.0: IO Pin 046 (P1-17/DB25-09): Muxed Encoder #0, pin Muxed B (Input) hm2/hm2_7i96s.0: IO Pin 047 (P1-19/DB25-10): Muxed Encoder #0, pin Muxed Index (Input) hm2/hm2_7i96s.0: IO Pin 048 (P1-21/DB25-11): Muxed Encoder #1, pin Muxed A (Input) hm2/hm2_7i96s.0: IO Pin 049 (P1-23/DB25-12): Muxed Encoder #1, pin Muxed B (Input) hm2/hm2_7i96s.0: IO Pin 050 (P1-25/DB25-13): Muxed Encoder #1, pin Muxed Index (Input) hm2/hm2_7i96s.0: registered hm2_eth: in hm2_eth_reset hm2_eth: HostMot2 ethernet driver unloaded hm2: unloading Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments Debug file information: Note: Using POSIX realtime INIFILE: ERR_CONVERSION, section=DISPLAY, tag=MAX_FEED_OVERRIDE, num=1, lineNo=24 [qtpyvcp][INFO] Logging to /home/andrew/qtpyvcp.log (logger.py:117) [qtpyvcp][INFO] QtPyVCP Version: 0+unknown (opt_parser.py:207) [qtpyvcp.utilities.info][INFO] The machine has 3 axes and 3 joints (info.py:414) [qtpyvcp.utilities.info][INFO] The Axis/Joint mapping is: (info.py:415) [qtpyvcp.utilities.info][INFO] Axis X --> Joint 0 (info.py:423) [qtpyvcp.utilities.info][INFO] Axis Y --> Joint 1 (info.py:423) [qtpyvcp.utilities.info][INFO] Axis Z --> Joint 2 (info.py:423) [qtpyvcp.utilities.info][WARNING] No [TRAJ] SPINDLES entry in INI, using 1 (info.py:127) [qtpyvcp.utilities.info][WARNING] No [DISPLAY] DEFAULT_SPINDLE_SPEED entry found in INI, using 300rpm (info.py:229) INIFILE: ERR_CONVERSION, section=DISPLAY, tag=MAX_FEED_OVERRIDE, num=1, lineNo=24 Waiting for component 'inihal' to become ready. While waiting for 'inihal', component 'qtpyvcp' loaded. Did you specify the correct name via 'loadusr -Wn'?INIFILE: ERR_CONVERSION, section=DISPLAY, tag=MAX_FEED_OVERRIDE, num=1, lineNo=24 ...[qtpyvcp][INFO] Loading global stylesheet: /usr/lib/python3/dist-packages/probe_basic/probe_basic.qss (application.py:186) ...[qtpyvcp.hal][INFO] Creating new HAL component: qtpyvcp_manualtoolchange (__init__.py:61) . While waiting for 'inihal', component 'qtpyvcp_manualtoolchange' loaded. Did you specify the correct name via 'loadusr -Wn'?...INIFILE: ERR_CONVERSION, section=DISPLAY, tag=MAX_FEED_OVERRIDE, num=1, lineNo=24 ..........INIFILE: ERR_CONVERSION, section=DISPLAY, tag=MAX_FEED_OVERRIDE, num=1, lineNo=24 ..........INIFILE: ERR_CONVERSION, section=DISPLAY, tag=MAX_FEED_OVERRIDE, num=1, lineNo=24 .......[qtpyvcp.actions.spindle_actions][ERROR] Error in spindle.override bindOk (spindle_actions.py:365) Traceback (most recent call last): File "/usr/lib/python3/dist-packages/qtpyvcp/actions/spindle_actions.py", line 347, in _or_bindOk widget.setMinimum(int(INFO.minSpindleOverride() * 100)) ^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/qtpyvcp/utilities/info.py", line 245, in minSpindleOverride return float(temp) ^^^^^^^^^^^ ValueError: could not convert string to float: '0.500000 # Recommended Setting for Probe Basic' ...INIFILE: ERR_CONVERSION, section=DISPLAY, tag=MAX_FEED_OVERRIDE, num=1, lineNo=24 ..........INIFILE: ERR_CONVERSION, section=DISPLAY, tag=MAX_FEED_OVERRIDE, num=1, lineNo=24 ..........INIFILE: ERR_CONVERSION, section=DISPLAY, tag=MAX_FEED_OVERRIDE, num=1, lineNo=24 ..........INIFILE: ERR_CONVERSION, section=DISPLAY, tag=MAX_FEED_OVERRIDE, num=1, lineNo=24 ..........HAL: ERROR: exit called before init :0: waitpid failed milltask inihal :0: milltask exited without becoming ready [qtpyvcp.actions.machine_actions][ERROR] Error in feed_override bindOk (machine_actions.py:411) Traceback (most recent call last): File "/usr/lib/python3/dist-packages/qtpyvcp/actions/machine_actions.py", line 394, in _feed_override_bindOk widget.setMaximum(int(INFO.maxFeedOverride() * 100)) ^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/qtpyvcp/utilities/info.py", line 252, in maxFeedOverride return float(temp) ^^^^^^^^^^^ ValueError: could not convert string to float: '2.000000 # Recommended Setting for Probe Basic' [qtpyvcp.app.launcher][CRITICAL] Unhandled exception in probe_basic line 8 (launcher.py:37) Traceback (most recent call last): File "/usr/bin/probe_basic", line 8, in sys.exit(main()) ^^^^^^ File "/usr/lib/python3/dist-packages/probe_basic/__init__.py", line 20, in main qtpyvcp.run_vcp(opts, VCP_CONFIG_FILE) File "/usr/lib/python3/dist-packages/qtpyvcp/__init__.py", line 26, in run_vcp run(*args, **kwargs) File "/usr/lib/python3/dist-packages/qtpyvcp/app/__init__.py", line 129, in run launch_application(opts, config) File "/usr/lib/python3/dist-packages/qtpyvcp/app/launcher.py", line 78, in launch_application loadWindows(config['windows']) File "/usr/lib/python3/dist-packages/qtpyvcp/app/launcher.py", line 230, in loadWindows window = _initialize_object_from_dict(window_dict) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/qtpyvcp/app/launcher.py", line 210, in _initialize_object_from_dict return obj(*args, **kwargs) ^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/probe_basic/probe_basic.py", line 53, in __init__ self.load_user_tabs() File "/usr/lib/python3/dist-packages/probe_basic/probe_basic.py", line 87, in load_user_tabs user_tab_folders = os.listdir(user_tabs_path) ^^^^^^^^^^^^^^^^^^^^^^^^^^ FileNotFoundError: [Errno 2] No such file or directory: 'user_tabs/ # REQUIRED Setting for Probe Basic' 15747 Stopping realtime threads Unloading hal components Note: Using POSIX realtime ----------------------------------------------------------------------- Info report created by linuxcnc_info: The file: /tmp/linuxcnc_info.txt can be posted to a forum or a web site like: http://pastebin.com in order to provide information about the linuxcnc system and configuration. Date: Tue 24 Dec 2024 14:31:22 AEDT UTC Date: Tue 24 Dec 2024 03:31:22 UTC this program: /usr/bin/linuxcnc_info uptime: 14:31:22 up 3:58, 1 user, load average: 1.03, 1.42, 1.49 lsb_release -sa: Debian Debian GNU/Linux 12 (bookworm) 12 bookworm linuxcnc: /usr/bin/linuxcnc pwd: /home/andrew/linuxcnc/configs/pm728_7i96s_7i85s_7i73_xyz_mill_PB USER: andrew LOGNAME: andrew HOME: /home/andrew EDITOR: VISUAL: LANGUAGE: en_AU:en TERM: dumb COLORTERM: DISPLAY: :0.0 DESKTOP: lightdm-xsession display size: 1920x1080 pixels (508x286 millimeters) PATH: /usr/bin:/home/andrew/linuxcnc/configs/pm728_7i96s_7i85s_7i73_xyz_mill_PB/bin:/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games uname items: nodename -n: debian kernel-name -s: Linux kernel-vers -v: #1 SMP PREEMPT_RT Debian 6.1.99-1 (2024-07-15) machine -m: x86_64 processor -p: unknown platform -i: unknown oper system -o: GNU/Linux /proc items: cmdline: BOOT_IMAGE=/boot/vmlinuz-6.1.0-23-rt-amd64 root=UUID=ebae6136-2075-4e7c-9850-1d42c8278b12 ro initrd=/install/gtk/initrd.gz quiet model name: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz cores: 2 cpu MHz: 3000.009 parport: serial: Versions: gcc: gcc (Debian 12.2.0-14) 12.2.0 python: Python 3.11.2 git: not_in_PATH git commit: NA tcl: 8.6 tk: 8.6 glade: not_in_PATH linuxcnc_var all: LINUXCNCVERSION: 2.9.3 LINUXCNC_AUX_GLADEVCP: /usr/share/linuxcnc/aux_gladevcp LINUXCNC_AUX_EXAMPLES: /usr/share/linuxcnc/aux_examples REALTIME: /usr/lib/linuxcnc/realtime RTS: uspace HALLIB_DIR: /usr/share/linuxcnc/hallib PYTHON: /usr/bin/python3 dpkg -l '*linuxcnc*': Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Architecture Description +++-===================-============-============-===================================================================== un linuxcnc (no description available) un linuxcnc-dev (no description available) un linuxcnc-doc (no description available) ii linuxcnc-doc-de 1:2.9.3 all motion controller for CNC machines and robots (German documentation) ii linuxcnc-doc-en 1:2.9.3 all motion controller for CNC machines and robots (English documentation) ii linuxcnc-doc-es 1:2.9.3 all motion controller for CNC machines and robots (Spanish documentation) ii linuxcnc-doc-fr 1:2.9.3 all motion controller for CNC machines and robots (French documentation) un linuxcnc-sim (no description available) un linuxcnc-sim-dev (no description available) ii linuxcnc-uspace 1:2.9.3 amd64 motion controller for CNC machines and robots ii linuxcnc-uspace-dev 1:2.9.3 amd64 PC based motion controller for real-time Linux