(1001)
(MACHINE)
(  VENDOR LINUX CNC PLASMA)
(  DESCRIPTION CNC PLASMA MACHINE)
N10 G21
N15 G90 G40
N20 G17 G91.1
N25 G64 P0.254 Q0.254
N30 M52 P1.
N35 M65 P2.
N40 M65 P3.
N45 M68 E3 Q0.

(HOLES)
(--------------------------------------------------------------------------------------------------)
(- THIS SECTION IS SET UP TO CENTER PUNCH THE SELECTED HOLES.                                     -)
(- ANY OTHER TYPE OF OPERATIONS IN THIS SECTION WILL NOT WORK CORRECTLY                           -)
(--------------------------------------------------------------------------------------------------)
(PLASMA CUTTING)
(THROUGH CUTTING)

N50 M190 P94.
N55 M66 P3. L3 Q1.
N60 F#<_hal[plasmac.cut-feed-rate]>
N65 G0 X224.78999 Y57.8485
(224.79, 59.69, 0)
(224.79, 57.8485, 0)
(224.79, 57.8485, 0)
(0)
(0)
(TRUE)
(TRUE)
(CENTER PUNCH THE HOLE ONLY)
N70 G0 Y59.69
N75 M3 $2 S1
N80 G91
N85 G1 X0.00001
N90 G90
N95 M5 $-1
N100 G0 X224.78999 Y57.8485
N105 G0 X223.83842 Y10.46659
(224.79, 8.89, 0)
(223.838, 10.4666, 0)
(223.838, 10.4666, 0)
(0)
(0)
(TRUE)
(TRUE)
(CENTER PUNCH THE HOLE ONLY)
N110 G0 X224.78999 Y8.89
N115 M3 $2 S1
N120 G91
N125 G1 X0.00001
N130 G90
N135 M5 $-1
N140 G0 X223.83842 Y10.46659
N145 G0 X80.40315 Y45.59818
(78.74, 43.815, 0)
(80.4032, 45.5982, 0)
(80.4032, 45.5982, 0)
(0)
(0)
(TRUE)
(TRUE)
(CENTER PUNCH THE HOLE ONLY)
N150 G0 X78.74 Y43.815
N155 M3 $2 S1
N160 G91
N165 G1 X0.00001
N170 G90
N175 M5 $-1
N180 G0 X80.40315 Y45.59818
N185 G0 X82.4369 Y76.53211
(83.2358, 77.4192, 0)
(82.4369, 76.5321, 0)
(82.4369, 76.5321, 0)
(0)
(0)
(TRUE)
(TRUE)
(CENTER PUNCH THE HOLE ONLY)
N190 G0 X83.2358 Y77.4192
N195 M3 $2 S1
N200 G91
N205 G1 X0.00001
N210 G90
N215 M5 $-1
N220 G0 X82.4369 Y76.53211
N225 G0 X36.1442 Y76.2254
(36.1442, 77.4192, 0)
(36.1442, 76.2254, 0)
(36.1442, 76.2254, 0)
(0)
(0)
(TRUE)
(TRUE)
(CENTER PUNCH THE HOLE ONLY)
N230 G0 Y77.4192
N235 M3 $2 S1
N240 G91
N245 G1 X0.00001
N250 G90
N255 M5 $-1
N260 G0 X36.1442 Y76.2254
N265 G0 X13.9065 Y59.69
(12.065, 59.69, 0)
(13.9065, 59.69, 0)
(13.9065, 59.69, 0)
(0)
(0)
(TRUE)
(TRUE)
(CENTER PUNCH THE HOLE ONLY)
N270 G0 X12.065
N275 M3 $2 S1
N280 G91
N285 G1 X0.00001
N290 G90
N295 M5 $-1
N300 G0 X13.9065
N305 G0 X38.2016 Y43.815
(40.64, 43.815, 0)
(38.2016, 43.815, 0)
(38.2016, 43.815, 0)
(0)
(0)
(TRUE)
(TRUE)
(CENTER PUNCH THE HOLE ONLY)
N310 G0 X40.64
N315 M3 $2 S1
N320 G91
N325 G1 X0.00001
N330 G90
N335 M5 $-1
N340 G0 X38.2016
N345 G0 X12.92307 Y10.51936
(12.065, 8.89, 0)
(12.9231, 10.5194, 0)
(12.9231, 10.5194, 0)
(0)
(0)
(TRUE)
(TRUE)
(CENTER PUNCH THE HOLE ONLY)
N350 G0 X12.065 Y8.89
N355 M3 $2 S1
N360 G91
N365 G1 X0.00001
N370 G90
N375 M5 $-1
N380 G0 X12.92307 Y10.51936
N385 G0 X37.03129 Y123.7121
(36.1442, 124.511, 0)
(37.0313, 123.712, 0)
(37.0313, 123.712, 0)
(0)
(0)
(TRUE)
(TRUE)
(CENTER PUNCH THE HOLE ONLY)
N390 G0 X36.1442 Y124.511
N395 M3 $2 S1
N400 G91
N405 G1 X0.00001
N410 G90
N415 M5 $-1
N420 G0 X37.03129 Y123.7121
N425 G0 X82.04218 Y124.49036
(83.2358, 124.511, 0)
(82.0422, 124.49, 0)
(82.042, 124.511, 0)
(0.020638258210129726)
(0)
(TRUE)
(TRUE)
N430 G3 X82.042 Y124.511 I1.19363 J0.02064
N435 G1 X82.04218 Y124.49036
N440 M5 $-1
(END CENTERPUNCH)

(2D PROFILE1)
(--------------------------------------------------)
(- THIS SECTION HAS REVERTED TO NORMAL OPERATION. -)
(--------------------------------------------------)
N445 G0 X45.79563 Y103.465
N450 M3 $0 S1
N455 G1 X41.4655 Y100.965
(59.69, 100.965, 0)
(41.4655, 100.965, 0)
(41.4655, 100.965, 0)
(0)
(0)
(FALSE)
(FALSE)
N460 G3 I18.2245 J0.00001
N465 M5 $-1
N470 G0 X38.9655 Y134.69563
N475 M3 $0 S1
N480 G1 X41.4655 Y130.36549
N485 X85.09
(85.09, 126.365, 0)
(85.09, 130.365, 0)
(89.0905, 126.365, 0)
(5.657560967850783)
(0)
(FALSE)
(FALSE)
N490 G2 X89.0905 Y126.365 J-4.0005
N495 G1 Y60.5155
N500 X143.3195
N505 Y72.39
(144.145, 72.39, 0)
(143.32, 72.39, 0)
(144.145, 73.2155, 0)
(1.167433986272956)
(0)
(FALSE)
(FALSE)
N510 G2 X144.145 Y73.2155 I0.8255
N515 G1 X231.267
(231.267, 69.215, 0)
(231.267, 73.2155, 0)
(235.268, 69.215, 0)
(5.65756636264482)
(0)
(FALSE)
(FALSE)
N520 G2 X235.2675 Y69.215 J-4.0005
N525 G1 Y5.715
(231.267, 5.715, 0)
(235.268, 5.715, 0)
(231.267, 1.7145, 0)
(5.657564002421796)
(0)
(FALSE)
(FALSE)
N530 G2 X231.267 Y1.7145 I-4.0005
N535 G1 X5.715
(5.715, 5.715, 0)
(5.715, 1.7145, 0)
(1.7145, 5.715, 0)
(5.657561642197787)
(0)
(FALSE)
(FALSE)
N540 G2 X1.7145 Y5.715 J4.0005
N545 G1 Y126.365
(5.715, 126.365, 0)
(1.7145, 126.365, 0)
(5.715, 130.365, 0)
(5.657558607625508)
(0)
(FALSE)
(FALSE)
N550 G2 X5.715 Y130.36549 I4.0005
N555 G1 X41.4655
N560 M5 $-1

N565 G0 X0. Y0.
N570 G90
N575 G40
N580 M65 P2.
N585 M65 P3.
N590 M68 E3 Q0.
N595 M5
N600 M30