[ 0.000000] Linux version 6.12.73+deb13-rt-amd64 (debian-kernel@lists.debian.org) (x86_64-linux-gnu-gcc-14 (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44) #1 SMP PREEMPT_RT Debian 6.12.73-1 (2026-02-17) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.12.73+deb13-rt-amd64 root=UUID=e3ab9370-acc0-4848-a2fa-dbb0908202ad ro quiet [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c87bbfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c87bc000-0x00000000c87c2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000c87c3000-0x00000000c8c04fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c8c05000-0x00000000c8fa9fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c8faa000-0x00000000db721fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db722000-0x00000000db917fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000db918000-0x00000000db935fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000db936000-0x00000000dba1dfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dba1e000-0x00000000dbffefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dbfff000-0x00000000dbffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021edfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Hewlett-Packard HP ProDesk 600 G1 DM/21D0, BIOS L04 v02.13 12/11/2014 [ 0.000000] DMI: Memory slots populated: 2/2 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3192.575 MHz processor [ 0.000782] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000785] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000793] last_pfn = 0x21ee00 max_arch_pfn = 0x400000000 [ 0.000798] MTRR map: 9 entries (5 fixed + 4 variable; max 25), built from 10 variable MTRRs [ 0.000800] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001059] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved [ 0.001062] last_pfn = 0xdc000 max_arch_pfn = 0x400000000 [ 0.004583] found SMP MP-table at [mem 0x000f4ef0-0x000f4eff] [ 0.004598] Using GB pages for direct mapping [ 0.005279] RAMDISK: [mem 0x27965000-0x2fca9fff] [ 0.005599] ACPI: Early table checksum verification disabled [ 0.005602] ACPI: RSDP 0x00000000000F9810 000024 (v02 HPQOEM) [ 0.005605] ACPI: XSDT 0x00000000DB91E088 00008C (v01 HPQOEM SLIC-BPC 20141211 AMI 00010013) [ 0.005610] ACPI: FACP 0x00000000DB92A848 00010C (v05 HPQOEM SLIC-BPC 20141211 AMI 00010013) [ 0.005615] ACPI: DSDT 0x00000000DB91E1A0 00C6A8 (v02 HPQOEM SLIC-BPC 00000001 INTL 20091112) [ 0.005618] ACPI: FACS 0x00000000DBA1C080 000040 [ 0.005620] ACPI: APIC 0x00000000DB92A958 000072 (v03 HPQOEM SLIC-BPC 20141211 AMI 00010013) [ 0.005623] ACPI: FPDT 0x00000000DB92A9D0 000044 (v01 HPQOEM SLIC-BPC 20141211 AMI 00010013) [ 0.005625] ACPI: SSDT 0x00000000DB92AA18 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711) [ 0.005628] ACPI: SSDT 0x00000000DB92AF58 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711) [ 0.005631] ACPI: SSDT 0x00000000DB92BA30 0001C7 (v01 PmRef LakeTiny 00003000 INTL 20120711) [ 0.005634] ACPI: MCFG 0x00000000DB92BBF8 00003C (v01 HPQOEM SLIC-BPC 20141211 MSFT 00000097) [ 0.005636] ACPI: HPET 0x00000000DB92BC38 000038 (v01 HPQOEM SLIC-BPC 20141211 AMI. 00000005) [ 0.005639] ACPI: SSDT 0x00000000DB92BC70 00036D (v01 SataRe SataTabl 00001000 INTL 20120711) [ 0.005642] ACPI: SSDT 0x00000000DB92BFE0 002881 (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [ 0.005645] ACPI: SSDT 0x00000000DB92E868 00668F (v01 COMPAQ WMI 00000001 MSFT 03000001) [ 0.005648] ACPI: SLIC 0x00000000DB934EF8 000176 (v01 HPQOEM SLIC-BPC 00000001 00000000) [ 0.005651] ACPI: ASF! 0x00000000DB935070 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.005653] ACPI: Reserving FACP table memory at [mem 0xdb92a848-0xdb92a953] [ 0.005654] ACPI: Reserving DSDT table memory at [mem 0xdb91e1a0-0xdb92a847] [ 0.005655] ACPI: Reserving FACS table memory at [mem 0xdba1c080-0xdba1c0bf] [ 0.005656] ACPI: Reserving APIC table memory at [mem 0xdb92a958-0xdb92a9c9] [ 0.005656] ACPI: Reserving FPDT table memory at [mem 0xdb92a9d0-0xdb92aa13] [ 0.005657] ACPI: Reserving SSDT table memory at [mem 0xdb92aa18-0xdb92af50] [ 0.005658] ACPI: Reserving SSDT table memory at [mem 0xdb92af58-0xdb92ba2f] [ 0.005658] ACPI: Reserving SSDT table memory at [mem 0xdb92ba30-0xdb92bbf6] [ 0.005659] ACPI: Reserving MCFG table memory at [mem 0xdb92bbf8-0xdb92bc33] [ 0.005660] ACPI: Reserving HPET table memory at [mem 0xdb92bc38-0xdb92bc6f] [ 0.005660] ACPI: Reserving SSDT table memory at [mem 0xdb92bc70-0xdb92bfdc] [ 0.005661] ACPI: Reserving SSDT table memory at [mem 0xdb92bfe0-0xdb92e860] [ 0.005662] ACPI: Reserving SSDT table memory at [mem 0xdb92e868-0xdb934ef6] [ 0.005663] ACPI: Reserving SLIC table memory at [mem 0xdb934ef8-0xdb93506d] [ 0.005663] ACPI: Reserving ASF! table memory at [mem 0xdb935070-0xdb935114] [ 0.005719] No NUMA configuration found [ 0.005719] Faking a node at [mem 0x0000000000000000-0x000000021edfffff] [ 0.005728] NODE_DATA(0) allocated [mem 0x21edd35c0-0x21edfdfff] [ 0.005947] Zone ranges: [ 0.005948] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.005949] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.005950] Normal [mem 0x0000000100000000-0x000000021edfffff] [ 0.005952] Device empty [ 0.005952] Movable zone start for each node [ 0.005955] Early memory node ranges [ 0.005955] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.005956] node 0: [mem 0x0000000000100000-0x00000000c87bbfff] [ 0.005958] node 0: [mem 0x00000000c87c3000-0x00000000c8c04fff] [ 0.005958] node 0: [mem 0x00000000c8faa000-0x00000000db721fff] [ 0.005959] node 0: [mem 0x00000000dbfff000-0x00000000dbffffff] [ 0.005960] node 0: [mem 0x0000000100000000-0x000000021edfffff] [ 0.005961] Initmem setup node 0 [mem 0x0000000000001000-0x000000021edfffff] [ 0.005966] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.005988] On node 0, zone DMA: 99 pages in unavailable ranges [ 0.011741] On node 0, zone DMA32: 7 pages in unavailable ranges [ 0.012290] On node 0, zone DMA32: 933 pages in unavailable ranges [ 0.012315] On node 0, zone DMA32: 2269 pages in unavailable ranges [ 0.012743] On node 0, zone Normal: 16384 pages in unavailable ranges [ 0.012791] On node 0, zone Normal: 4608 pages in unavailable ranges [ 0.012803] Reserving Intel graphics memory at [mem 0xdd200000-0xdf1fffff] [ 0.012859] ACPI: PM-Timer IO Port: 0x408 [ 0.012866] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.012882] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.012884] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.012886] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.012890] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.012891] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.012895] TSC deadline timer available [ 0.012900] CPU topo: Max. logical packages: 1 [ 0.012901] CPU topo: Max. logical dies: 1 [ 0.012901] CPU topo: Max. dies per package: 1 [ 0.012906] CPU topo: Max. threads per core: 2 [ 0.012907] CPU topo: Num. cores per package: 2 [ 0.012908] CPU topo: Num. threads per package: 4 [ 0.012908] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.012925] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.012927] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x000fffff] [ 0.012928] PM: hibernation: Registered nosave memory: [mem 0xc87bc000-0xc87c2fff] [ 0.012930] PM: hibernation: Registered nosave memory: [mem 0xc8c05000-0xc8fa9fff] [ 0.012931] PM: hibernation: Registered nosave memory: [mem 0xdb722000-0xdbffefff] [ 0.012933] PM: hibernation: Registered nosave memory: [mem 0xdc000000-0xffffffff] [ 0.012935] [mem 0xdf200000-0xf7ffffff] available for PCI devices [ 0.012936] Booting paravirtualized kernel on bare hardware [ 0.012938] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.017860] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.018178] percpu: Embedded 67 pages/cpu s237568 r8192 d28672 u524288 [ 0.018184] pcpu-alloc: s237568 r8192 d28672 u524288 alloc=1*2097152 [ 0.018186] pcpu-alloc: [0] 0 1 2 3 [ 0.018202] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.12.73+deb13-rt-amd64 root=UUID=e3ab9370-acc0-4848-a2fa-dbb0908202ad ro quiet [ 0.018253] random: crng init done [ 0.019157] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.019634] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.019705] Fallback order for Node 0: 0 [ 0.019709] Built 1 zonelists, mobility grouping on. Total pages: 2072851 [ 0.019710] Policy zone: Normal [ 0.019717] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.019723] software IO TLB: area num 4. [ 0.045333] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.045367] Kernel/User page tables isolation: enabled [ 0.045404] ftrace: allocating 45512 entries in 178 pages [ 0.052691] ftrace: allocated 178 pages with 4 groups [ 0.053193] Dynamic Preempt: lazy [ 0.053241] rcu: Preemptible hierarchical RCU implementation. [ 0.053242] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.053243] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.053244] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [ 0.053244] No expedited grace period (rcu_normal_after_boot). [ 0.053245] Trampoline variant of Tasks RCU enabled. [ 0.053245] Rude variant of Tasks RCU enabled. [ 0.053246] Tracing variant of Tasks RCU enabled. [ 0.053246] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.053247] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.053255] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.053257] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.053258] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.057966] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16 [ 0.058173] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.060034] Console: colour VGA+ 80x25 [ 0.060037] printk: legacy console [tty0] enabled [ 0.060057] ACPI: Core revision 20240827 [ 0.060157] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.060172] APIC: Switch to symmetric I/O mode setup [ 0.060536] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.080176] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e04e3ee4a4, max_idle_ns: 440795207220 ns [ 0.080180] Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.15 BogoMIPS (lpj=12770300) [ 0.080196] x86/cpu: VMX (outside TXT) disabled by BIOS [ 0.080201] CPU0: Thermal monitoring enabled (TM1) [ 0.080229] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.080230] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.080233] process: using mwait in idle threads [ 0.080234] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.080236] Spectre V2 : Mitigation: Retpolines [ 0.080236] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT [ 0.080237] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.080238] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.080239] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.080240] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.080241] MDS: Mitigation: Clear CPU buffers [ 0.080242] MMIO Stale Data: Unknown: No mitigations [ 0.080243] SRBDS: Mitigation: Microcode [ 0.080244] VMSCAPE: Mitigation: IBPB before exit to userspace [ 0.080248] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.080249] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.080250] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.080250] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.080252] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.097546] Freeing SMP alternatives memory: 36K [ 0.097549] pid_max: default: 32768 minimum: 301 [ 0.097601] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,tomoyo,bpf,ipe,ima,evm [ 0.097664] landlock: Up and running. [ 0.097664] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.097740] AppArmor: AppArmor initialized [ 0.097760] TOMOYO Linux initialized [ 0.097924] LSM support for eBPF active [ 0.097985] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.097995] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.098424] smpboot: CPU0: Intel(R) Core(TM) i3-4170T CPU @ 3.20GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.098640] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.098671] ... version: 3 [ 0.098671] ... bit width: 48 [ 0.098672] ... generic registers: 4 [ 0.098672] ... value mask: 0000ffffffffffff [ 0.098673] ... max period: 00007fffffffffff [ 0.098674] ... fixed-purpose events: 3 [ 0.098674] ... event mask: 000000070000000f [ 0.098791] signal: max sigframe size: 1776 [ 0.098803] Estimated ratio of average max frequency by base frequency (times 1024): 1024 [ 0.100178] rcu: Hierarchical SRCU implementation. [ 0.100178] rcu: Max phase no-delay instances is 1000. [ 0.100178] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.100178] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.100178] smp: Bringing up secondary CPUs ... [ 0.100178] smpboot: x86: Booting SMP configuration: [ 0.100178] .... node #0, CPUs: #1 #2 #3 [ 0.104880] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.104880] VMSCAPE: SMT on, STIBP is required for full protection. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/vmscape.html for more details. [ 0.104880] smp: Brought up 1 node, 4 CPUs [ 0.104880] smpboot: Total of 4 processors activated (25540.60 BogoMIPS) [ 0.115656] node 0 deferred pages initialised in 8ms [ 0.115661] Memory: 7893752K/8291404K available (16384K kernel code, 2577K rwdata, 11764K rodata, 4144K init, 4884K bss, 391144K reserved, 0K cma-reserved) [ 0.115661] devtmpfs: initialized [ 0.115661] x86/mm: Memory block size: 128MB [ 0.117031] ACPI: PM: Registering ACPI NVS region [mem 0xc87bc000-0xc87c2fff] (28672 bytes) [ 0.117031] ACPI: PM: Registering ACPI NVS region [mem 0xdb936000-0xdba1dfff] (950272 bytes) [ 0.117031] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.117031] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.117031] pinctrl core: initialized pinctrl subsystem [ 0.117031] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.117042] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.117104] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.117170] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.117202] audit: initializing netlink subsys (disabled) [ 0.117255] audit: type=2000 audit(1775637994.000:1): state=initialized audit_enabled=0 res=1 [ 0.117255] thermal_sys: Registered thermal governor 'fair_share' [ 0.117255] thermal_sys: Registered thermal governor 'bang_bang' [ 0.117255] thermal_sys: Registered thermal governor 'step_wise' [ 0.117255] thermal_sys: Registered thermal governor 'user_space' [ 0.117255] thermal_sys: Registered thermal governor 'power_allocator' [ 0.117255] cpuidle: using governor ladder [ 0.117255] cpuidle: using governor menu [ 0.117255] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.117255] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.117255] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f] [ 0.117255] PCI: ECAM [mem 0xf8000000-0xfbffffff] reserved as E820 entry [ 0.117255] PCI: Using configuration type 1 for base access [ 0.117255] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.117255] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.124218] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.124218] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.124218] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.124218] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.128362] ACPI: Added _OSI(Module Device) [ 0.128362] ACPI: Added _OSI(Processor Device) [ 0.128362] ACPI: Added _OSI(Processor Aggregator Device) [ 0.136763] ACPI: 7 ACPI AML tables successfully acquired and loaded [ 0.137268] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.144467] ACPI: Dynamic OEM Table Load: [ 0.144473] ACPI: SSDT 0xFFFF8F2C0092E000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.144991] ACPI: Dynamic OEM Table Load: [ 0.144995] ACPI: SSDT 0xFFFF8F2C00D64800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.145579] ACPI: Dynamic OEM Table Load: [ 0.145582] ACPI: SSDT 0xFFFF8F2C01677200 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.146522] ACPI: Interpreter enabled [ 0.146545] ACPI: PM: (supports S0 S3 S4 S5) [ 0.146546] ACPI: Using IOAPIC for interrupt routing [ 0.146574] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.146575] PCI: Using E820 reservations for host bridge windows [ 0.146783] ACPI: Enabled 7 GPEs in block 00 to 3F [ 0.156540] ACPI: \_TZ_.FN00: New power resource [ 0.156613] ACPI: \_TZ_.FN01: New power resource [ 0.157145] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.157150] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.157283] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME] [ 0.160300] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR] [ 0.160301] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.160765] PCI host bridge to bus 0000:00 [ 0.160768] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.160770] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.160771] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.160773] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000e7fff window] [ 0.160774] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window] [ 0.160775] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.160792] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000 conventional PCI endpoint [ 0.160866] pci 0000:00:02.0: [8086:041e] type 00 class 0x030000 conventional PCI endpoint [ 0.160873] pci 0000:00:02.0: BAR 0 [mem 0xf7800000-0xf7bfffff 64bit] [ 0.160878] pci 0000:00:02.0: BAR 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.160881] pci 0000:00:02.0: BAR 4 [io 0xf000-0xf03f] [ 0.160891] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.160986] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 PCIe Root Complex Integrated Endpoint [ 0.160993] pci 0000:00:03.0: BAR 0 [mem 0xf7c34000-0xf7c37fff 64bit] [ 0.161098] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 conventional PCI endpoint [ 0.161113] pci 0000:00:14.0: BAR 0 [mem 0xf7c20000-0xf7c2ffff 64bit] [ 0.161165] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.161273] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 conventional PCI endpoint [ 0.161289] pci 0000:00:16.0: BAR 0 [mem 0xf7c40000-0xf7c4000f 64bit] [ 0.161343] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.161403] pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002 conventional PCI endpoint [ 0.161416] pci 0000:00:16.3: BAR 0 [io 0xf0e0-0xf0e7] [ 0.161423] pci 0000:00:16.3: BAR 1 [mem 0xf7c3e000-0xf7c3efff] [ 0.161535] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000 conventional PCI endpoint [ 0.161547] pci 0000:00:19.0: BAR 0 [mem 0xf7c00000-0xf7c1ffff] [ 0.161554] pci 0000:00:19.0: BAR 1 [mem 0xf7c3d000-0xf7c3dfff] [ 0.161561] pci 0000:00:19.0: BAR 2 [io 0xf080-0xf09f] [ 0.161611] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.161696] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 conventional PCI endpoint [ 0.161710] pci 0000:00:1a.0: BAR 0 [mem 0xf7c3c000-0xf7c3c3ff] [ 0.161784] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.161875] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 PCIe Root Complex Integrated Endpoint [ 0.161889] pci 0000:00:1b.0: BAR 0 [mem 0xf7c30000-0xf7c33fff 64bit] [ 0.161953] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.162054] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 conventional PCI endpoint [ 0.162068] pci 0000:00:1d.0: BAR 0 [mem 0xf7c3b000-0xf7c3b3ff] [ 0.162142] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.162236] pci 0000:00:1f.0: [8086:8c4c] type 00 class 0x060100 conventional PCI endpoint [ 0.162420] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 conventional PCI endpoint [ 0.162431] pci 0000:00:1f.2: BAR 0 [io 0xf0d0-0xf0d7] [ 0.162437] pci 0000:00:1f.2: BAR 1 [io 0xf0c0-0xf0c3] [ 0.162444] pci 0000:00:1f.2: BAR 2 [io 0xf0b0-0xf0b7] [ 0.162449] pci 0000:00:1f.2: BAR 3 [io 0xf0a0-0xf0a3] [ 0.162455] pci 0000:00:1f.2: BAR 4 [io 0xf060-0xf07f] [ 0.162462] pci 0000:00:1f.2: BAR 5 [mem 0xf7c3a000-0xf7c3a7ff] [ 0.162493] pci 0000:00:1f.2: PME# supported from D3hot [ 0.162577] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 conventional PCI endpoint [ 0.162591] pci 0000:00:1f.3: BAR 0 [mem 0xf7c39000-0xf7c390ff 64bit] [ 0.162608] pci 0000:00:1f.3: BAR 4 [io 0xf040-0xf05f] [ 0.163811] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.163863] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ 0.163864] ACPI: PCI: Interrupt link LNKB disabled [ 0.163914] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.163960] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.164005] ACPI: PCI: Interrupt link LNKE configured for IRQ 5 [ 0.164056] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.164057] ACPI: PCI: Interrupt link LNKF disabled [ 0.164102] ACPI: PCI: Interrupt link LNKG configured for IRQ 3 [ 0.164147] ACPI: PCI: Interrupt link LNKH configured for IRQ 4 [ 0.164565] iommu: Default domain type: Translated [ 0.164565] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.164565] pps_core: LinuxPPS API ver. 1 registered [ 0.164565] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.164565] PTP clock support registered [ 0.164565] EDAC MC: Ver: 3.0.0 [ 0.164565] NetLabel: Initializing [ 0.164565] NetLabel: domain hash size = 128 [ 0.164565] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.164565] NetLabel: unlabeled traffic allowed by default [ 0.164565] PCI: Using ACPI for IRQ routing [ 0.165670] PCI: pci_cache_line_size set to 64 bytes [ 0.165699] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff] [ 0.165700] e820: reserve RAM buffer [mem 0xc87bc000-0xcbffffff] [ 0.165701] e820: reserve RAM buffer [mem 0xc8c05000-0xcbffffff] [ 0.165702] e820: reserve RAM buffer [mem 0xdb722000-0xdbffffff] [ 0.165703] e820: reserve RAM buffer [mem 0x21ee00000-0x21fffffff] [ 0.165727] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.165727] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.165727] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.165727] vgaarb: loaded [ 0.165727] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.165727] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.168205] clocksource: Switched to clocksource tsc-early [ 0.168753] VFS: Disk quotas dquot_6.6.0 [ 0.168760] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.168902] AppArmor: AppArmor Filesystem Enabled [ 0.168924] pnp: PnP ACPI init [ 0.169007] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.169100] pnp 00:01: can't evaluate _CRS: 12311 [ 0.169267] system 00:03: [io 0x0a20-0x0a3f] has been reserved [ 0.169269] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.169383] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.170007] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.170009] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.170011] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.170012] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.170014] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.170016] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.170017] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.170019] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.170021] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 0.170022] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.170024] system 00:07: [mem 0xf7fdf000-0xf7fdffff] has been reserved [ 0.170026] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.170266] system 00:08: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.170272] pnp: PnP ACPI: found 9 devices [ 0.176529] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.176594] NET: Registered PF_INET protocol family [ 0.176670] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.187470] tcp_listen_portaddr_hash hash table entries: 4096 (order: 6, 163840 bytes, linear) [ 0.187511] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.187540] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.187973] TCP bind hash table entries: 65536 (order: 11, 5242880 bytes, vmalloc hugepage) [ 0.188929] TCP: Hash tables configured (established 65536 bind 65536) [ 0.189024] MPTCP token hash table entries: 8192 (order: 7, 458752 bytes, linear) [ 0.189122] UDP hash table entries: 4096 (order: 7, 393216 bytes, linear) [ 0.189204] UDP-Lite hash table entries: 4096 (order: 7, 393216 bytes, linear) [ 0.189296] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.189305] NET: Registered PF_XDP protocol family [ 0.189314] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.189317] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.189318] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.189319] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000e7fff window] [ 0.189320] pci_bus 0000:00: resource 8 [mem 0xdf200000-0xfeafffff window] [ 0.214074] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x740 took 22503 usecs [ 0.234065] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x740 took 19502 usecs [ 0.234085] PCI: CLS 64 bytes, default 64 [ 0.234105] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.234105] software IO TLB: mapped [mem 0x00000000d7722000-0x00000000db722000] (64MB) [ 0.234154] Trying to unpack rootfs image as initramfs... [ 0.234566] Initialise system trusted keyrings [ 0.234574] Key type blacklist registered [ 0.234640] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 0.234656] zbud: loaded [ 0.234797] fuse: init (API version 7.41) [ 0.234948] integrity: Platform Keyring initialized [ 0.234953] integrity: Machine keyring initialized [ 0.261221] Key type asymmetric registered [ 0.261226] Asymmetric key parser 'x509' registered [ 0.613779] Freeing initrd memory: 134420K [ 0.618156] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.618190] io scheduler mq-deadline registered [ 0.619453] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.620129] ACPI: \_TZ_.TZ00: _AL2 evaluation failure [ 0.620223] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.620225] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.620399] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.620400] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.620510] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.621263] 0000:00:16.3: ttyS0 at I/O 0xf0e0 (irq = 19, base_baud = 115200) is a 16550A [ 0.621494] Linux agpgart interface v0.103 [ 0.621907] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 0.627185] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.627191] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.627325] mousedev: PS/2 mouse device common for all mice [ 0.627349] rtc_cmos 00:02: RTC can wake from S4 [ 0.627691] rtc_cmos 00:02: registered as rtc0 [ 0.627727] rtc_cmos 00:02: setting system clock to 2026-04-08T08:46:35 UTC (1775637995) [ 0.627758] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.627849] intel_pstate: Intel P-state driver initializing [ 0.628906] NET: Registered PF_INET6 protocol family [ 0.633643] Segment Routing with IPv6 [ 0.633658] In-situ OAM (IOAM) with IPv6 [ 0.633681] mip6: Mobile IPv6 [ 0.633687] NET: Registered PF_PACKET protocol family [ 0.633723] mpls_gso: MPLS GSO support [ 0.633933] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.633965] microcode: Current revision: 0x00000028 [ 0.633967] microcode: Updated early from: 0x0000001a [ 0.634063] IPI shorthand broadcast: enabled [ 0.636350] sched_clock: Marking stable (632074500, 1971066)->(859195876, -225150310) [ 0.636489] registered taskstats version 1 [ 0.636665] Loading compiled-in X.509 certificates [ 0.653234] Loaded X.509 cert 'Build time autogenerated kernel key: 29e147690476c881e155071eec96759927e53eed' [ 0.656326] Demotion targets for Node 0: null [ 0.656509] Key type .fscrypt registered [ 0.656511] Key type fscrypt-provisioning registered [ 0.675430] Key type encrypted registered [ 0.675436] AppArmor: AppArmor sha256 policy hashing enabled [ 0.675446] ima: No TPM chip found, activating TPM-bypass! [ 0.675447] ima: Allocated hash algorithm: sha256 [ 0.675457] ima: No architecture policies found [ 0.675472] evm: Initialising EVM extended attributes: [ 0.675473] evm: security.selinux [ 0.675474] evm: security.SMACK64 (disabled) [ 0.675475] evm: security.SMACK64EXEC (disabled) [ 0.675475] evm: security.SMACK64TRANSMUTE (disabled) [ 0.675476] evm: security.SMACK64MMAP (disabled) [ 0.675476] evm: security.apparmor [ 0.675477] evm: security.ima [ 0.675477] evm: security.capability [ 0.675478] evm: HMAC attrs: 0x1 [ 0.702147] RAS: Correctable Errors collector initialized. [ 0.707252] clk: Disabling unused clocks [ 0.707255] PM: genpd: Disabling unused power domains [ 0.709004] Freeing unused decrypted memory: 2028K [ 0.709729] Freeing unused kernel image (initmem) memory: 4144K [ 0.709821] Write protecting the kernel read-only data: 28672k [ 0.710216] Freeing unused kernel image (rodata/data gap) memory: 524K [ 0.752555] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.752556] x86/mm: Checking user space page tables [ 0.791302] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.791306] Run /init as init process [ 0.791307] with arguments: [ 0.791308] /init [ 0.791308] with environment: [ 0.791309] HOME=/ [ 0.791309] TERM=linux [ 0.898517] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 0.914035] ACPI: button: Power Button [PWRB] [ 0.914138] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.934044] ACPI: button: Power Button [PWRF] [ 0.938761] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20240827/utaddress-204) [ 0.938769] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 0.938777] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x00000000000008FF (\GPR) (20240827/utaddress-204) [ 0.938780] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 0.938782] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPRL) (20240827/utaddress-204) [ 0.938785] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x00000000000008FF (\GPR) (20240827/utaddress-204) [ 0.938788] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 0.938790] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPRL) (20240827/utaddress-204) [ 0.938793] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x00000000000008FF (\GPR) (20240827/utaddress-204) [ 0.938796] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 0.938797] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 0.960796] SCSI subsystem initialized [ 0.965562] e1000e: Intel(R) PRO/1000 Network Driver [ 0.965564] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.965804] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 0.993962] ACPI: bus type USB registered [ 0.994304] usbcore: registered new interface driver usbfs [ 0.994318] usbcore: registered new interface driver hub [ 0.994336] usbcore: registered new device driver usb [ 0.995593] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.996649] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.997905] i2c i2c-0: Successfully instantiated SPD at 0x50 [ 1.018608] ACPI: bus type drm_connector registered [ 1.034230] libata version 3.00 loaded. [ 1.058018] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 1.058198] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.058208] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.058225] ehci-pci 0000:00:1a.0: debug port 2 [ 1.063047] ahci 0000:00:1f.2: version 3.0 [ 1.063275] ahci 0000:00:1f.2: AHCI vers 0001.0300, 32 command slots, 6 Gbps, SATA mode [ 1.063279] ahci 0000:00:1f.2: 1/6 ports implemented (port mask 0x1) [ 1.063281] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 1.066071] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c3c000 [ 1.074031] scsi host0: ahci [ 1.076727] scsi host1: ahci [ 1.076953] scsi host2: ahci [ 1.077278] scsi host3: ahci [ 1.077451] scsi host4: ahci [ 1.077673] scsi host5: ahci [ 1.077762] ata1: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a100 irq 25 lpm-pol 3 [ 1.077764] ata2: DUMMY [ 1.077765] ata3: DUMMY [ 1.077766] ata4: DUMMY [ 1.077767] ata5: DUMMY [ 1.077767] ata6: DUMMY [ 1.078005] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.078075] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 1.078078] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.078080] usb usb1: Product: EHCI Host Controller [ 1.078082] usb usb1: Manufacturer: Linux 6.12.73+deb13-rt-amd64 ehci_hcd [ 1.078083] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.078523] hub 1-0:1.0: USB hub found [ 1.078535] hub 1-0:1.0: 3 ports detected [ 1.078865] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.078876] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.078892] ehci-pci 0000:00:1d.0: debug port 2 [ 1.082843] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c3b000 [ 1.094012] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.094057] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 1.094059] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.094060] usb usb2: Product: EHCI Host Controller [ 1.094061] usb usb2: Manufacturer: Linux 6.12.73+deb13-rt-amd64 ehci_hcd [ 1.094062] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.094226] hub 2-0:1.0: USB hub found [ 1.094237] hub 2-0:1.0: 3 ports detected [ 1.119734] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 8c:dc:d4:3e:a3:fb [ 1.119739] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.119773] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 1.242052] tsc: Refined TSC clocksource calibration: 3192.604 MHz [ 1.242059] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e04ff556d3, max_idle_ns: 440795348168 ns [ 1.242084] clocksource: Switched to clocksource tsc [ 1.326047] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.342044] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.390260] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.391368] ata1.00: ATA-8: HGST HTS541010A9E680, JA0OA7J0, max UDMA/133 [ 1.391785] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.393209] ata1.00: configured for UDMA/133 [ 1.393438] scsi 0:0:0:0: Direct-Access ATA HGST HTS541010A9 A7J0 PQ: 0 ANSI: 5 [ 1.398644] e1000e 0000:00:19.0 eno1: renamed from eth0 [ 1.399769] iTCO_vendor_support: vendor-support=0 [ 1.403941] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.403951] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.405040] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 1.405400] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.405405] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.405408] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.405542] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 1.405545] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.405547] usb usb3: Product: xHCI Host Controller [ 1.405549] usb usb3: Manufacturer: Linux 6.12.73+deb13-rt-amd64 xhci-hcd [ 1.405550] usb usb3: SerialNumber: 0000:00:14.0 [ 1.405843] hub 3-0:1.0: USB hub found [ 1.405906] hub 3-0:1.0: 14 ports detected [ 1.409037] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12 [ 1.409042] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.409043] usb usb4: Product: xHCI Host Controller [ 1.409045] usb usb4: Manufacturer: Linux 6.12.73+deb13-rt-amd64 xhci-hcd [ 1.409046] usb usb4: SerialNumber: 0000:00:14.0 [ 1.409280] hub 4-0:1.0: USB hub found [ 1.409341] hub 4-0:1.0: 6 ports detected [ 1.415516] iTCO_wdt iTCO_wdt.1.auto: Found a Lynx Point TCO device (Version=2, TCOBASE=0x0460) [ 1.415657] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0) [ 1.416739] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.416743] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.416755] sd 0:0:0:0: [sda] Write Protect is off [ 1.416758] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.416773] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.416800] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 1.470390] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.04 [ 1.470394] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.470718] hub 1-1:1.0: USB hub found [ 1.470948] hub 1-1:1.0: 6 ports detected [ 1.471414] ACPI Warning: \_SB.PCI0.EHC2.HUBN.PR01.PR16._UPC: Return Package is too small - found 1 elements, expected 4 (20240827/nsprepkg-362) [ 1.486397] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04 [ 1.486400] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.486746] hub 2-1:1.0: USB hub found [ 1.486930] hub 2-1:1.0: 8 ports detected [ 1.654111] usb 3-5: new full-speed USB device number 2 using xhci_hcd [ 1.758601] sda: sda1 sda2 < sda5 > [ 1.758796] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.792385] usb 3-5: New USB device found, idVendor=1ea7, idProduct=0066, bcdDevice= 2.00 [ 1.792389] usb 3-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.792391] usb 3-5: Product: 2.4G Mouse [ 1.811814] hid: raw HID events driver (C) Jiri Kosina [ 1.831530] usbcore: registered new interface driver usbhid [ 1.831533] usbhid: USB HID core driver [ 1.838917] input: 2.4G Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/0003:1EA7:0066.0001/input/input5 [ 1.914009] usb 3-6: new low-speed USB device number 3 using xhci_hcd [ 1.994101] hid-generic 0003:1EA7:0066.0001: input,hidraw0: USB HID v1.10 Keyboard [2.4G Mouse] on usb-0000:00:14.0-5/input0 [ 1.994412] input: 2.4G Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.1/0003:1EA7:0066.0002/input/input6 [ 1.994467] input: 2.4G Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.1/0003:1EA7:0066.0002/input/input7 [ 1.994574] input: 2.4G Mouse Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.1/0003:1EA7:0066.0002/input/input8 [ 2.050092] input: 2.4G Mouse System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.1/0003:1EA7:0066.0002/input/input9 [ 2.050256] hid-generic 0003:1EA7:0066.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [2.4G Mouse] on usb-0000:00:14.0-5/input1 [ 2.053944] usb 3-6: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00 [ 2.053950] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.053953] usb 3-6: Product: USB Optical Mouse [ 2.053954] usb 3-6: Manufacturer: PixArt [ 2.058692] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:093A:2510.0003/input/input11 [ 2.058774] hid-generic 0003:093A:2510.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-6/input0 [ 2.178005] usb 3-13: new high-speed USB device number 4 using xhci_hcd [ 2.314389] usb 3-13: New USB device found, idVendor=2357, idProduct=011e, bcdDevice= 2.00 [ 2.314392] usb 3-13: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.314393] usb 3-13: Product: 802.11ac WLAN Adapter [ 2.314394] usb 3-13: Manufacturer: Realtek [ 2.314395] usb 3-13: SerialNumber: 00e04c000001 [ 2.381983] i915 0000:00:02.0: [drm] Found HASWELL (device ID 041e) display version 7.00 stepping N/A [ 2.382335] i915 0000:00:02.0: vgaarb: deactivate vga console [ 2.382745] Console: switching to colour dummy device 80x25 [ 2.383479] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.403311] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 [ 2.443932] fbcon: i915drmfb (fb0) is primary device [ 2.525839] Console: switching to colour frame buffer device 240x67 [ 2.543943] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 2.739974] PM: Image not found (code -22) [ 12.433874] EXT4-fs (sda1): orphan cleanup on readonly fs [ 12.434327] EXT4-fs (sda1): mounted filesystem e3ab9370-acc0-4848-a2fa-dbb0908202ad ro with ordered data mode. Quota mode: none. [ 12.790676] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 14.365755] systemd[1]: Inserted module 'autofs4' [ 14.636910] systemd[1]: systemd 257.9-1~deb13u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF -XKBCOMMON -UTMP +SYSVINIT +LIBARCHIVE) [ 14.636917] systemd[1]: Detected architecture x86-64. [ 14.716578] systemd[1]: Hostname set to . [ 14.985402] systemd[1]: bpf-restrict-fs: LSM BPF program attached [ 16.107443] systemd[1]: /etc/systemd/system/anydesk.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/anydesk.pid → /run/anydesk.pid; please update the unit file accordingly. [ 16.308141] systemd[1]: Queued start job for default target graphical.target. [ 16.359267] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ 16.359648] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 16.359892] systemd[1]: Created slice user.slice - User and Session Slice. [ 16.359960] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 16.360138] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. [ 16.360161] systemd[1]: Expecting device dev-disk-by\x2duuid-a32f023a\x2d5527\x2d4619\x2db799\x2d418fffca8579.device - /dev/disk/by-uuid/a32f023a-5527-4619-b799-418fffca8579... [ 16.360195] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups. [ 16.360208] systemd[1]: Reached target remote-fs.target - Remote File Systems. [ 16.360219] systemd[1]: Reached target slices.target - Slice Units. [ 16.382056] systemd[1]: Listening on systemd-creds.socket - Credential Encryption/Decryption. [ 16.382171] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 16.382267] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 16.382370] systemd[1]: Listening on systemd-journald.socket - Journal Sockets. [ 16.382404] systemd[1]: systemd-pcrextend.socket - TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 16.382419] systemd[1]: systemd-pcrlock.socket - Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 16.382498] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 16.382553] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 16.387403] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... [ 16.388243] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 16.389392] systemd[1]: Mounting run-lock.mount - Legacy Locks Directory /run/lock... [ 16.394179] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 16.398140] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... [ 16.412821] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... [ 16.413717] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 16.415270] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... [ 16.418254] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... [ 16.422208] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... [ 16.423562] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... [ 16.423678] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). [ 16.423724] systemd[1]: systemd-hibernate-clear.service - Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67). [ 16.434242] systemd[1]: Starting systemd-journald.service - Journal Service... [ 16.525674] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 16.525694] systemd[1]: systemd-pcrmachine.service - TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 16.526598] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 16.526659] systemd[1]: systemd-tpm2-setup-early.service - Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 16.528008] systemd[1]: Starting systemd-udev-load-credentials.service - Load udev Rules from Credentials... [ 16.530242] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 16.533002] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 16.558375] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. [ 16.559004] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 16.559287] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 16.559443] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. [ 16.559685] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 16.559835] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. [ 16.560776] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... [ 16.561504] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... [ 16.562866] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully... [ 16.576594] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 16.576783] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. [ 16.806048] systemd-journald[350]: Collecting audit messages is disabled. [ 16.842140] systemd[1]: Finished systemd-udev-load-credentials.service - Load udev Rules from Credentials. [ 16.948457] systemd[1]: Finished systemd-udev-trigger.service - Coldplug All udev Devices. [ 17.010927] lp: driver loaded but no devices found [ 17.022575] ppdev: user-space parallel port driver [ 17.063653] systemd[1]: Starting ifupdown-pre.service - Helper to synchronize boot up for ifupdown... [ 17.063808] systemd[1]: Started systemd-journald.service - Journal Service. [ 17.248739] EXT4-fs (sda1): re-mounted e3ab9370-acc0-4848-a2fa-dbb0908202ad r/w. [ 17.352866] systemd-journald[350]: Received client request to flush runtime journal. [ 22.834845] input: PC Speaker as /devices/platform/pcspkr/input/input12 [ 22.918330] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 22.918332] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 22.918333] RAPL PMU: hw unit of domain package 2^-14 Joules [ 22.918334] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 22.918334] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 22.954497] input: HP WMI hotkeys as /devices/virtual/input/input13 [ 22.992804] hp_bioscfg: Unable to set BIOS settings on HP systems [ 23.100378] at24 0-0050: supply vcc not found, using dummy regulator [ 23.100428] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 23.102024] at24 0-0050: 256 byte spd EEPROM, read-only [ 23.195565] cryptd: max_cpu_qlen set to 1000 [ 23.893088] AES CTR mode by8 optimization enabled [ 23.988113] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 23.996657] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 23.996826] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 23.996990] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 23.997147] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 24.498756] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 24.545311] 88XXau: loading out-of-tree module taints kernel. [ 24.545346] 88XXau: module verification failed: signature and/or required key missing - tainting kernel [ 24.604466] ------------[ cut here ]------------ [ 24.604469] Unpatched return thunk in use. This should not happen! [ 24.604472] WARNING: CPU: 2 PID: 416 at arch/x86/kernel/cpu/bugs.c:3484 __warn_thunk+0x2a/0x40 [ 24.604481] Modules linked in: 88XXau(OE+) snd_hda_scodec_component snd_hda_intel snd_intel_dspcfg coretemp snd_intel_sdw_acpi snd_hda_codec crct10dif_pclmul ghash_clmulni_intel sha512_ssse3 sha256_ssse3 sha1_ssse3 snd_hda_core cfg80211 snd_hwdep aesni_intel snd_pcm mei_wdt mei_hdcp mei_pxp snd_timer snd mei_me joydev gf128mul crypto_simd cryptd mei at24 sg soundcore firmware_attributes_class hp_wmi rapl intel_cstate intel_uncore evdev sparse_keymap pcspkr platform_profile rfkill wmi_bmof parport_pc ppdev lp parport efi_pstore configfs nfnetlink ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic i915 hid_generic usbhid hid drm_buddy video i2c_algo_bit drm_display_helper cec rc_core sd_mod iTCO_wdt ttm intel_pmc_bxt xhci_pci iTCO_vendor_support watchdog xhci_hcd psmouse drm_kms_helper ahci ehci_pci libahci ehci_hcd crc32_pclmul crc32c_intel libata serio_raw i2c_i801 drm fan i2c_smbus usbcore e1000e scsi_mod lpc_ich scsi_common wmi usb_common button [ 24.604546] CPU: 2 UID: 0 PID: 416 Comm: (udev-worker) Tainted: G OE 6.12.73+deb13-rt-amd64 #1 Debian 6.12.73-1 [ 24.604551] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE [ 24.604551] Hardware name: Hewlett-Packard HP ProDesk 600 G1 DM/21D0, BIOS L04 v02.13 12/11/2014 [ 24.604553] RIP: 0010:__warn_thunk+0x2a/0x40 [ 24.604557] Code: 66 0f 1f 00 0f 1f 44 00 00 80 3d 18 25 de 01 00 74 05 c3 cc cc cc cc 48 c7 c7 f0 fc d3 85 c6 05 03 25 de 01 01 e8 f6 39 06 00 <0f> 0b c3 cc cc cc cc 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 [ 24.604559] RSP: 0000:ffffd1cb00d97ad8 EFLAGS: 00010286 [ 24.604561] RAX: 0000000000000000 RBX: 00000000ffffffff RCX: 0000000000000027 [ 24.604563] RDX: ffff8f2d16b217c8 RSI: 0000000000000001 RDI: ffff8f2d16b217c0 [ 24.604565] RBP: ffffd1cb00d97b28 R08: 0000000000000000 R09: ffffd1cb00d97898 [ 24.604566] R10: ffffffff864bdd68 R11: 0000000000000003 R12: 00007f10e469344d [ 24.604568] R13: ffffd1cb00d97b48 R14: ffff8f2c0435d700 R15: ffff8f2c04559d60 [ 24.604569] FS: 00007f10e53b3980(0000) GS:ffff8f2d16b00000(0000) knlGS:0000000000000000 [ 24.604571] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 24.604573] CR2: 00007fa99da17098 CR3: 0000000104230004 CR4: 00000000001706f0 [ 24.604575] Call Trace: [ 24.604577] [ 24.604579] warn_thunk_thunk+0x1a/0x30 [ 24.604586] ? __UNIQUE_ID_vermagic454+0x2e34c0128938/0x2e34c0128938 [88XXau] [ 24.604633] init_module+0x14/0xff0 [88XXau] [ 24.604669] ? __UNIQUE_ID_vermagic454+0x2e34c0128938/0x2e34c0128938 [88XXau] [ 24.604705] ? do_one_initcall+0x5b/0x310 [ 24.604710] ? do_init_module+0x60/0x230 [ 24.604714] ? init_module_from_file+0x89/0xe0 [ 24.604718] ? idempotent_init_module+0x11e/0x310 [ 24.604722] ? __x64_sys_finit_module+0x5e/0xb0 [ 24.604725] ? do_syscall_64+0x82/0x190 [ 24.604730] ? vfs_read+0x15e/0x360 [ 24.604734] ? vfs_read+0x15e/0x360 [ 24.604737] ? __rseq_handle_notify_resume+0xa2/0x490 [ 24.604742] ? restore_fpregs_from_fpstate+0x3c/0xa0 [ 24.604746] ? switch_fpu_return+0x4e/0xd0 [ 24.604750] ? arch_exit_to_user_mode_prepare.isra.0+0x77/0xa0 [ 24.604754] ? syscall_exit_to_user_mode+0x37/0x1b0 [ 24.604757] ? do_syscall_64+0x8e/0x190 [ 24.604760] ? do_syscall_64+0x8e/0x190 [ 24.604762] ? do_user_addr_fault+0x36c/0x620 [ 24.604766] ? arch_exit_to_user_mode_prepare.isra.0+0x16/0xa0 [ 24.604770] ? entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 24.604774] [ 24.604775] ---[ end trace 0000000000000000 ]--- [ 24.619975] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14 [ 24.620109] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15 [ 24.620220] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16 [ 24.667316] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC221: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 24.667322] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x17/0x0/0x0/0x0/0x0) [ 24.667325] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 24.667326] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 24.667327] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 24.667328] snd_hda_codec_realtek hdaudioC1D0: Mic=0x1a [ 24.676160] usb 3-13: 88XXau 48:22:54:2d:13:32 hw_info[107] [ 24.677522] usbcore: registered new interface driver rtl88XXau [ 24.711477] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17 [ 24.711573] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18 [ 24.711669] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19 [ 24.711760] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20 [ 24.825791] rtl88XXau 3-13:1.0 wlx4822542d1332: renamed from wlan0 [ 24.894123] intel_rapl_common: Found RAPL domain package [ 24.894126] intel_rapl_common: Found RAPL domain core [ 24.894127] intel_rapl_common: Found RAPL domain uncore [ 24.894128] intel_rapl_common: Found RAPL domain dram [ 24.894133] intel_rapl_common: package-0:package:long_term locked by BIOS [ 24.894135] intel_rapl_common: package-0:package:short_term locked by BIOS [ 25.774399] Adding 8290300k swap on /dev/sda5. Priority:-2 extents:1 across:8290300k [ 26.889385] audit: type=1400 audit(1775638021.754:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=603 comm="apparmor_parser" [ 26.889427] audit: type=1400 audit(1775638021.754:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=602 comm="apparmor_parser" [ 26.889463] audit: type=1400 audit(1775638021.754:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=604 comm="apparmor_parser" [ 26.889701] audit: type=1400 audit(1775638021.754:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=605 comm="apparmor_parser" [ 26.946032] audit: type=1400 audit(1775638021.814:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=609 comm="apparmor_parser" [ 26.946498] audit: type=1400 audit(1775638021.814:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=608 comm="apparmor_parser" [ 26.946502] audit: type=1400 audit(1775638021.814:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=607 comm="apparmor_parser" [ 26.951908] audit: type=1400 audit(1775638021.818:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=612 comm="apparmor_parser" [ 26.952268] audit: type=1400 audit(1775638021.818:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=610 comm="apparmor_parser" [ 26.952271] audit: type=1400 audit(1775638021.818:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=611 comm="apparmor_parser" [ 29.255715] EtherCAT: Master driver 1.6.9 1.6.9.gb709e58-1+28.1 [ 29.255832] EtherCAT: 1 master waiting for devices. [ 30.408230] ec_generic: EtherCAT master generic Ethernet device module 1.6.9 1.6.9.gb709e58-1+28.1 [ 30.408245] EtherCAT: Accepting 8C:DC:D4:3E:A3:FB as main device for master 0. [ 30.408255] ec_generic: Binding socket to interface 2 (eno1). [ 30.434052] EtherCAT 0: Starting EtherCAT-IDLE thread. [ 32.206084] NET: Registered PF_QIPCRTR protocol family [ 34.298119] kauditd_printk_skb: 102 callbacks suppressed [ 34.298122] audit: type=1400 audit(1775638029.166:114): apparmor="DENIED" operation="open" class="file" profile="/usr/sbin/cupsd" name="/etc/paperspecs" pid=845 comm="cupsd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 [ 35.832833] audit: type=1400 audit(1775638030.698:115): apparmor="ALLOWED" operation="capable" class="cap" profile="Xorg" pid=869 comm="Xorg" capability=12 capname="net_admin" [ 37.668604] audit: type=1400 audit(1775638032.534:116): apparmor="DENIED" operation="capable" class="cap" profile="/usr/sbin/cupsd" pid=845 comm="cupsd" capability=12 capname="net_admin" [ 47.857528] audit: type=1400 audit(1775638042.722:117): apparmor="ALLOWED" operation="capable" class="cap" profile="Xorg" pid=869 comm="Xorg" capability=12 capname="net_admin" [71408.179498] audit: type=1400 audit(1775709403.053:118): apparmor="DENIED" operation="open" class="file" profile="/usr/sbin/cupsd" name="/etc/paperspecs" pid=2725 comm="cupsd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 [71408.181727] audit: type=1400 audit(1775709403.057:119): apparmor="DENIED" operation="capable" class="cap" profile="/usr/sbin/cupsd" pid=2725 comm="cupsd" capability=12 capname="net_admin" [158913.006206] audit: type=1400 audit(1775796907.883:120): apparmor="DENIED" operation="open" class="file" profile="/usr/sbin/cupsd" name="/etc/paperspecs" pid=4908 comm="cupsd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 [192094.978099] e1000e 0000:00:19.0 eno1: NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [192094.978283] EtherCAT 0: Link state of ecm0 changed to UP. [192094.986286] EtherCAT 0: 1 slave(s) responding on main device. Re-scanning on next possibility. [192094.986291] EtherCAT 0: Slave states on main device: INIT. [192094.986292] EtherCAT 0: Re-scanning now. [192094.986690] EtherCAT 0: Scanning bus. [192095.130333] EtherCAT 0: Bus scanning completed in 144 ms. [192095.130336] EtherCAT 0: Using slave 0 as DC reference clock. [192095.138371] EtherCAT 0: Slave states on main device: PREOP. [192113.388475] ------------[ cut here ]------------ [192113.388477] URB 000000008ebd4fd1 submitted while active [192113.388515] WARNING: CPU: 1 PID: 850 at drivers/usb/core/urb.c:379 usb_submit_urb+0x5e2/0x620 [usbcore] [192113.388542] Modules linked in: snd_seq_dummy snd_hrtimer snd_seq snd_seq_device qrtr ec_generic(OE) ec_master(OE) binfmt_misc intel_rapl_msr intel_rapl_common snd_hda_codec_realtek x86_pkg_temp_thermal snd_hda_codec_generic snd_hda_codec_hdmi intel_powerclamp 88XXau(OE) snd_hda_scodec_component snd_hda_intel snd_intel_dspcfg coretemp snd_intel_sdw_acpi snd_hda_codec crct10dif_pclmul ghash_clmulni_intel sha512_ssse3 sha256_ssse3 sha1_ssse3 snd_hda_core cfg80211 snd_hwdep aesni_intel snd_pcm mei_wdt mei_hdcp mei_pxp snd_timer snd mei_me joydev gf128mul crypto_simd cryptd mei at24 sg soundcore firmware_attributes_class hp_wmi rapl intel_cstate intel_uncore evdev sparse_keymap pcspkr platform_profile rfkill wmi_bmof parport_pc ppdev lp parport efi_pstore configfs nfnetlink ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic i915 hid_generic usbhid hid drm_buddy video i2c_algo_bit drm_display_helper cec rc_core sd_mod iTCO_wdt ttm intel_pmc_bxt xhci_pci iTCO_vendor_support watchdog xhci_hcd psmouse [192113.388574] drm_kms_helper ahci ehci_pci libahci ehci_hcd crc32_pclmul crc32c_intel libata serio_raw i2c_i801 drm fan i2c_smbus usbcore e1000e scsi_mod lpc_ich scsi_common wmi usb_common button [192113.388583] CPU: 1 UID: 0 PID: 850 Comm: anydesk Tainted: G W OE 6.12.73+deb13-rt-amd64 #1 Debian 6.12.73-1 [192113.388586] Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE [192113.388587] Hardware name: Hewlett-Packard HP ProDesk 600 G1 DM/21D0, BIOS L04 v02.13 12/11/2014 [192113.388588] RIP: 0010:usb_submit_urb+0x5e2/0x620 [usbcore] [192113.388601] Code: 3e 57 c0 e8 60 16 9d c4 eb d9 b8 fe ff ff ff e9 6e fd ff ff 48 89 fe 48 c7 c7 50 7b 59 c0 c6 05 87 e4 01 00 01 e8 3e c0 36 c4 <0f> 0b eb 9f b8 f8 ff ff ff e9 4a fd ff ff 66 2e 0f 1f 84 00 00 00 [192113.388602] RSP: 0018:ffffd1cb00f1b558 EFLAGS: 00010282 [192113.388603] RAX: 0000000000000000 RBX: ffff8f2c05901e40 RCX: 0000000000000027 [192113.388605] RDX: ffff8f2d16aa17c8 RSI: 0000000000000001 RDI: ffff8f2d16aa17c0 [192113.388605] RBP: ffffd1cb00ac9000 R08: 0000000000000000 R09: ffffd1cb00f1b318 [192113.388606] R10: ffffffff864bdd68 R11: 0000000000000003 R12: 0000000000000002 [192113.388607] R13: ffff8f2c3b25a000 R14: ffffd1cb00aca2b8 R15: ffffd1cb00cf9600 [192113.388608] FS: 00007fc9c5debf00(0000) GS:ffff8f2d16a80000(0000) knlGS:0000000000000000 [192113.388609] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [192113.388610] CR2: 0000000019c34240 CR3: 00000001241ec001 CR4: 00000000001706f0 [192113.388612] Call Trace: [192113.388613] [192113.388616] usb_write_port+0x13c/0x2d0 [88XXau] [192113.388665] ? upload_txpktbuf_8812au+0x201/0x360 [88XXau] [192113.388707] ? rtl8812au_hal_xmit+0x2a/0x150 [88XXau] [192113.388747] ? rtl8812au_hal_xmit+0x13d/0x150 [88XXau] [192113.388786] ? rtw_xmit_posthandle+0x48/0x110 [88XXau] [192113.388821] ? rtw_xmit_posthandle+0x99/0x110 [88XXau] [192113.388854] ? rtw_xmit_entry+0x109/0x1d0 [88XXau] [192113.388895] ? dev_hard_start_xmit+0x5f/0x1d0 [192113.388898] ? sch_direct_xmit+0x9f/0x360 [192113.388901] ? __dev_queue_xmit+0x9a5/0xed0 [192113.388904] ? __kmalloc_node_track_caller_noprof+0x131/0x360 [192113.388907] ? kmalloc_reserve+0x64/0x100 [192113.388910] ? ip_finish_output2+0x2bc/0x5f0 [192113.388914] ? ip_do_fragment+0x209/0x510 [192113.388916] ? __pfx_ip_finish_output2+0x10/0x10 [192113.388919] ? ip_send_skb+0xa9/0xb0 [192113.388920] ? udp_send_skb+0x18e/0x390 [192113.388923] ? udp_sendmsg+0xb7c/0xf60 [192113.388925] ? __pfx_ip_generic_getfrag+0x10/0x10 [192113.388929] ? __sys_sendto+0x1c4/0x1f0 [192113.388932] ? __sys_sendto+0x1c4/0x1f0 [192113.388934] ? __x64_sys_sendto+0x24/0x30 [192113.388936] ? do_syscall_64+0x82/0x190 [192113.388939] ? mod_objcg_state+0xd9/0x2d0 [192113.388942] ? kmem_cache_alloc_noprof+0xd5/0x270 [192113.388944] ? apparmor_file_alloc_security+0x52/0x1d0 [192113.388947] ? security_file_alloc+0xa5/0x180 [192113.388951] ? init_file+0x62/0xb0 [192113.388953] ? arch_exit_to_user_mode_prepare.isra.0+0x16/0xa0 [192113.388957] ? syscall_exit_to_user_mode+0x37/0x1b0 [192113.388958] ? do_syscall_64+0x8e/0x190 [192113.388960] ? __sys_socket+0xd2/0x110 [192113.388962] ? arch_exit_to_user_mode_prepare.isra.0+0x16/0xa0 [192113.388964] ? syscall_exit_to_user_mode+0x37/0x1b0 [192113.388965] ? do_syscall_64+0x8e/0x190 [192113.388967] ? __count_memcg_events+0x67/0x100 [192113.388969] ? count_memcg_events.constprop.0+0x1a/0x30 [192113.388971] ? handle_mm_fault+0x1bb/0x2c0 [192113.388974] ? do_user_addr_fault+0x36c/0x620 [192113.388976] ? arch_exit_to_user_mode_prepare.isra.0+0x16/0xa0 [192113.388979] ? entry_SYSCALL_64_after_hwframe+0x76/0x7e [192113.388982] [192113.388983] ---[ end trace 0000000000000000 ]--- [192363.466378] EtherCAT ERROR 0-0: ecrt_master_sdo_upload(): Buffer too small. [192883.405948] EtherCAT: Requesting master 0... [192883.405953] EtherCAT: Successfully requested master 0. [192883.446239] EtherCAT ERROR 0-0: SDO download 0x1C12:01 (2 bytes) aborted. [192883.446245] EtherCAT ERROR 0-0: Unknown SDO abort code 0x06010003. [192883.446247] EtherCAT ERROR 0-0: Failed to process SDO request. [192883.482238] EtherCAT ERROR 0-0: SDO download 0x1C13:01 (2 bytes) aborted. [192883.482243] EtherCAT ERROR 0-0: Unknown SDO abort code 0x06010003. [192883.482245] EtherCAT ERROR 0-0: Failed to process SDO request. [192883.514415] EtherCAT 0: Domain0: Logical address 0x00000000, 24 byte, expected working counter 3. [192883.514420] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 24 byte, type LRW. [192883.514433] EtherCAT 0: Master thread exited. [192883.514435] EtherCAT 0: Starting EtherCAT-OP thread. [192888.686230] EtherCAT 0: Slave states on main device: OP. [192963.014800] EtherCAT 0: Master thread exited. [192963.014815] EtherCAT 0: Starting EtherCAT-IDLE thread. [192963.014876] EtherCAT 0: Releasing master... [192963.014879] EtherCAT 0: Released. [192963.022510] EtherCAT ERROR 0-0: AL status message 0x001A: "Synchronization error". [192963.023027] EtherCAT 0-0: Acknowledged state SAFEOP. [192963.030254] EtherCAT 0: Slave states on main device: PREOP. [193193.180270] EtherCAT: Requesting master 0... [193193.180275] EtherCAT: Successfully requested master 0. [193193.210218] EtherCAT ERROR 0-0: SDO download 0x1C12:01 (2 bytes) aborted. [193193.210223] EtherCAT ERROR 0-0: Unknown SDO abort code 0x06010003. [193193.210225] EtherCAT ERROR 0-0: Failed to process SDO request. [193193.250258] EtherCAT ERROR 0-0: SDO download 0x1C13:01 (2 bytes) aborted. [193193.250264] EtherCAT ERROR 0-0: Unknown SDO abort code 0x06010003. [193193.250266] EtherCAT ERROR 0-0: Failed to process SDO request. [193193.290411] EtherCAT 0: Domain0: Logical address 0x00000000, 14 byte, expected working counter 3. [193193.290415] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 14 byte, type LRW. [193193.290429] EtherCAT 0: Master thread exited. [193193.290431] EtherCAT 0: Starting EtherCAT-OP thread. [193193.290476] EtherCAT WARNING 0: 1 datagram UNMATCHED! [193193.451889] EtherCAT ERROR 0-0: SDO upload 0x1A01:00 aborted. [193193.451896] EtherCAT ERROR 0-0: SDO abort message 0x06020000: "This object does not exist in the object directory". [193193.451899] EtherCAT ERROR 0-0: Failed to read number of mapped PDO entries. [193193.451900] EtherCAT WARNING 0-0: Failed to read PDO entries for PDO 0x1A01. [193193.455891] EtherCAT ERROR 0-0: SDO download 0x1A01:00 (1 bytes) aborted. [193193.455896] EtherCAT ERROR 0-0: SDO abort message 0x06020000: "This object does not exist in the object directory". [193193.455898] EtherCAT WARNING 0-0: Failed to clear PDO mapping. [193193.455899] EtherCAT WARNING 0-0: Currently mapped PDO entries: (none). Entries to map: 0x6041:00/16 0x6064:00/32 0x6061:00/8 [193193.455906] EtherCAT WARNING 0-0: Failed to configure mapping of PDO 0x1A01. [193198.466905] EtherCAT WARNING 0-0: Slave did not sync after 5000 ms. [193198.474900] EtherCAT ERROR 0-0: Failed to set SAFEOP state, slave refused state change (PREOP + ERROR). [193198.476898] EtherCAT ERROR 0-0: AL status message 0x0024: "Invalid Input Mapping". [193198.479890] EtherCAT 0-0: Acknowledged state PREOP. [193272.538212] EtherCAT ERROR 0-0: ecrt_master_sdo_upload(): Buffer too small. [193311.946202] EtherCAT ERROR 0-0: SDO upload 0x603F:01 aborted. [193311.946208] EtherCAT ERROR 0-0: SDO abort message 0x06090011: "Subindex does not exist". [193311.946210] EtherCAT ERROR 0-0: Failed to process SDO request. [193337.752668] perf: interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 79750 [193352.322212] EtherCAT ERROR 0-0: ecrt_master_sdo_upload(): Buffer too small. [193364.026205] EtherCAT ERROR 0-0: SDO upload 0x0100:00 aborted. [193364.026211] EtherCAT ERROR 0-0: SDO abort message 0x06020000: "This object does not exist in the object directory". [193364.026214] EtherCAT ERROR 0-0: Failed to process SDO request. [193368.198206] EtherCAT ERROR 0-0: ecrt_master_sdo_upload(): Buffer too small. [193371.610203] EtherCAT ERROR 0-0: ecrt_master_sdo_upload(): Buffer too small. [193383.238205] EtherCAT ERROR 0-0: ecrt_master_sdo_upload(): Buffer too small. [193394.274192] EtherCAT ERROR 0-0: SDO upload 0x1001:01 aborted. [193394.274199] EtherCAT ERROR 0-0: SDO abort message 0x06090011: "Subindex does not exist". [193394.274201] EtherCAT ERROR 0-0: Failed to process SDO request. [193513.435547] warning: `Socket Thread' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [193529.438359] EtherCAT 0: Master thread exited. [193529.438370] EtherCAT 0: Starting EtherCAT-IDLE thread. [193529.438421] EtherCAT ERROR 0-0: Failed to receive AL state datagram: Datagram initialized. [193529.438436] EtherCAT 0: Releasing master... [193529.438438] EtherCAT 0: Released. [193529.582277] EtherCAT WARNING: Datagram 000000002148578e (master-fsm) was SKIPPED 1 time. [193613.192768] EtherCAT: Requesting master 0... [193613.192775] EtherCAT: Successfully requested master 0. [193613.226223] EtherCAT ERROR 0-0: SDO download 0x1C12:01 (2 bytes) aborted. [193613.226229] EtherCAT ERROR 0-0: Unknown SDO abort code 0x06010003. [193613.226231] EtherCAT ERROR 0-0: Failed to process SDO request. [193613.262205] EtherCAT ERROR 0-0: SDO download 0x1C13:01 (2 bytes) aborted. [193613.262211] EtherCAT ERROR 0-0: Unknown SDO abort code 0x06010003. [193613.262214] EtherCAT ERROR 0-0: Failed to process SDO request. [193613.294390] EtherCAT 0: Domain0: Logical address 0x00000000, 14 byte, expected working counter 3. [193613.294394] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 14 byte, type LRW. [193613.294410] EtherCAT 0: Master thread exited. [193613.294412] EtherCAT 0: Starting EtherCAT-OP thread. [193613.294491] EtherCAT WARNING 0: 1 datagram UNMATCHED! [193613.457375] EtherCAT ERROR 0-0: SDO download 0x1A01:00 (1 bytes) aborted. [193613.457381] EtherCAT ERROR 0-0: SDO abort message 0x06020000: "This object does not exist in the object directory". [193613.457383] EtherCAT WARNING 0-0: Failed to clear PDO mapping. [193613.457384] EtherCAT WARNING 0-0: Currently mapped PDO entries: 0x6041:00/16 0x6064:00/32 0x6061:00/8. Entries to map: 0x6041:00/16 0x6064:00/32 0x6061:00/8 [193613.457395] EtherCAT WARNING 0-0: Failed to configure mapping of PDO 0x1A01. [193618.478358] EtherCAT WARNING 0-0: Slave did not sync after 5000 ms. [193618.484393] EtherCAT ERROR 0-0: Failed to set SAFEOP state, slave refused state change (PREOP + ERROR). [193618.486346] EtherCAT ERROR 0-0: AL status message 0x0024: "Invalid Input Mapping". [193618.488346] EtherCAT 0-0: Acknowledged state PREOP. [193699.574435] EtherCAT 0: Master thread exited. [193699.574445] EtherCAT 0: Starting EtherCAT-IDLE thread. [193699.574492] EtherCAT 0: 0 slave(s) responding on main device. Re-scanning on next possibility. [193699.574505] EtherCAT 0: Releasing master... [193699.574507] EtherCAT 0: Released. [193699.593146] EtherCAT 0: 1 slave(s) responding on main device. Re-scanning on next possibility. [193699.593153] EtherCAT 0: Slave states on main device: PREOP. [193699.593154] EtherCAT 0: Re-scanning now. [193699.593857] EtherCAT 0: Scanning bus. [193699.722793] EtherCAT ERROR 0-0: SDO upload 0x1A01:00 aborted. [193699.722798] EtherCAT ERROR 0-0: SDO abort message 0x06020000: "This object does not exist in the object directory". [193699.722800] EtherCAT ERROR 0-0: Failed to read number of mapped PDO entries. [193699.722801] EtherCAT ERROR 0-0: Failed to read mapped PDO entries for PDO 0x1A01. [193699.722803] EtherCAT 0: Bus scanning completed in 132 ms. [193699.722804] EtherCAT 0: Using slave 0 as DC reference clock. [193699.730189] EtherCAT WARNING: Datagram 000000002148578e (master-fsm) was SKIPPED 1 time. [193703.167435] EtherCAT: Requesting master 0... [193703.167441] EtherCAT: Successfully requested master 0. [193703.169102] EtherCAT ERROR 0-0: SDO download 0x1C13:01 (2 bytes) aborted. [193703.169106] EtherCAT ERROR 0-0: Unknown SDO abort code 0x06010003. [193703.169107] EtherCAT ERROR 0-0: Failed to process SDO request. [193703.170064] EtherCAT 0: Domain0: Logical address 0x00000000, 22 byte, expected working counter 3. [193703.170067] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 22 byte, type LRW. [193703.170078] EtherCAT 0: Master thread exited. [193703.170080] EtherCAT 0: Starting EtherCAT-OP thread. [193703.170150] EtherCAT WARNING 0: 1 datagram UNMATCHED! [193708.690405] EtherCAT WARNING 0-0: Slave did not sync after 5000 ms. [193709.006182] EtherCAT 0: Slave states on main device: OP. [193755.491604] EtherCAT 0: Master thread exited. [193755.491615] EtherCAT 0: Starting EtherCAT-IDLE thread. [193755.491658] EtherCAT ERROR 0-0: Failed to receive AL state datagram: Datagram initialized. [193755.491675] EtherCAT 0: Releasing master... [193755.491678] EtherCAT 0: Released. [193755.498190] EtherCAT 0: Slave states on main device: SAFEOP + ERROR. [193755.506485] EtherCAT ERROR 0-0: AL status message 0x001A: "Synchronization error". [193755.506986] EtherCAT 0-0: Acknowledged state SAFEOP. [193755.514358] EtherCAT 0: Slave states on main device: PREOP. [193756.110213] EtherCAT WARNING: Datagram 000000002148578e (master-fsm) was SKIPPED 1 time. [193763.907622] EtherCAT: Requesting master 0... [193763.907628] EtherCAT: Successfully requested master 0. [193763.986189] EtherCAT ERROR 0-0: SDO download 0x1C13:01 (2 bytes) aborted. [193763.986194] EtherCAT ERROR 0-0: Unknown SDO abort code 0x06010003. [193763.986196] EtherCAT ERROR 0-0: Failed to process SDO request. [193764.022353] EtherCAT 0: Domain0: Logical address 0x00000000, 22 byte, expected working counter 3. [193764.022358] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 22 byte, type LRW. [193764.022371] EtherCAT 0: Master thread exited. [193764.022373] EtherCAT 0: Starting EtherCAT-OP thread. [193764.022434] EtherCAT WARNING 0: 1 datagram UNMATCHED! [193765.338188] EtherCAT 0: Slave states on main device: OP. [193803.566605] EtherCAT 0: Master thread exited. [193803.566617] EtherCAT 0: Starting EtherCAT-IDLE thread. [193803.566672] EtherCAT ERROR 0-0: Failed to receive AL state datagram: Datagram initialized. [193803.566686] EtherCAT 0: Releasing master... [193803.566688] EtherCAT 0: Released. [193803.574187] EtherCAT 0: Slave states on main device: SAFEOP + ERROR. [193803.582479] EtherCAT ERROR 0-0: AL status message 0x001A: "Synchronization error". [193803.583005] EtherCAT 0-0: Acknowledged state SAFEOP. [193803.590252] EtherCAT 0: Slave states on main device: PREOP. [193804.446259] EtherCAT WARNING: Datagram 000000002148578e (master-fsm) was SKIPPED 1 time. [193920.666263] EtherCAT: Requesting master 0... [193920.666269] EtherCAT: Successfully requested master 0. [193920.734181] EtherCAT ERROR 0-0: SDO download 0x1C13:01 (2 bytes) aborted. [193920.734186] EtherCAT ERROR 0-0: Unknown SDO abort code 0x06010003. [193920.734188] EtherCAT ERROR 0-0: Failed to process SDO request. [193920.770360] EtherCAT ERROR 0 0:0: PDO entry 0x60B8:00 is not mapped. [193920.770390] EtherCAT 0: Releasing master... [193920.770396] EtherCAT 0: Released. [193970.652649] EtherCAT: Requesting master 0... [193970.652655] EtherCAT: Successfully requested master 0. [193970.726191] EtherCAT ERROR 0-0: SDO download 0x1C13:01 (2 bytes) aborted. [193970.726197] EtherCAT ERROR 0-0: Unknown SDO abort code 0x06010003. [193970.726198] EtherCAT ERROR 0-0: Failed to process SDO request. [193970.758421] EtherCAT ERROR 0 0:0: PDO entry 0x60B8:00 is not mapped. [193970.758472] EtherCAT 0: Releasing master... [193970.758479] EtherCAT 0: Released. [194044.552893] EtherCAT: Requesting master 0... [194044.552899] EtherCAT: Successfully requested master 0. [194044.622171] EtherCAT ERROR 0-0: SDO download 0x1C13:01 (2 bytes) aborted. [194044.622177] EtherCAT ERROR 0-0: Unknown SDO abort code 0x06010003. [194044.622179] EtherCAT ERROR 0-0: Failed to process SDO request. [194044.658360] EtherCAT 0: Domain0: Logical address 0x00000000, 22 byte, expected working counter 3. [194044.658364] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 22 byte, type LRW. [194044.658379] EtherCAT 0: Master thread exited. [194044.658381] EtherCAT 0: Starting EtherCAT-OP thread. [194044.658462] EtherCAT WARNING 0: 1 datagram UNMATCHED! [194049.614159] EtherCAT 0: Slave states on main device: OP. [194567.058645] perf: interrupt took too long (3129 > 3128), lowering kernel.perf_event_max_sample_rate to 63750 [194955.188664] EtherCAT 0: Master thread exited. [194955.188676] EtherCAT 0: Starting EtherCAT-IDLE thread. [194955.188728] EtherCAT 0: 0 slave(s) responding on main device. Re-scanning on next possibility. [194955.188742] EtherCAT 0: Releasing master... [194955.188744] EtherCAT 0: Released. [194955.194469] EtherCAT ERROR 0-0: AL status message 0x001A: "Synchronization error". [194955.194978] EtherCAT 0-0: Acknowledged state SAFEOP. [194955.202253] EtherCAT 0: 1 slave(s) responding on main device. Re-scanning on next possibility. [194955.202260] EtherCAT 0: Slave states on main device: PREOP. [194955.202262] EtherCAT 0: Re-scanning now. [194955.203016] EtherCAT 0: Scanning bus. [194955.337056] EtherCAT 0: Bus scanning completed in 132 ms. [194955.337061] EtherCAT 0: Using slave 0 as DC reference clock. [194955.818115] EtherCAT WARNING: Datagram 000000002148578e (master-fsm) was SKIPPED 1 time. [194972.540549] EtherCAT: Requesting master 0... [194972.540554] EtherCAT: Successfully requested master 0. [194972.606112] EtherCAT ERROR 0-0: SDO download 0x1C13:01 (2 bytes) aborted. [194972.606118] EtherCAT ERROR 0-0: Unknown SDO abort code 0x06010003. [194972.606120] EtherCAT ERROR 0-0: Failed to process SDO request. [194972.650274] EtherCAT 0: Domain0: Logical address 0x00000000, 22 byte, expected working counter 3. [194972.650279] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 22 byte, type LRW. [194972.650292] EtherCAT 0: Master thread exited. [194972.650295] EtherCAT 0: Starting EtherCAT-OP thread. [194972.650350] EtherCAT WARNING 0: 1 datagram UNMATCHED! [194973.150109] EtherCAT 0: Slave states on main device: OP. [195526.022303] e1000e 0000:00:19.0 eno1: NIC Link is Down [195526.023228] EtherCAT 0: Link state of ecm0 changed to DOWN. [195526.026075] EtherCAT 0: 0 slave(s) responding on main device. Re-scanning on next possibility. [195526.026211] EtherCAT 0: Re-scanning now. [201479.869946] e1000e 0000:00:19.0 eno1: NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [201479.870873] EtherCAT 0: Link state of ecm0 changed to UP. [201479.885708] EtherCAT 0: 1 slave(s) responding on main device. Re-scanning on next possibility. [201479.885714] EtherCAT 0: Slave states on main device: INIT. [201479.885715] EtherCAT 0: Re-scanning now. [201479.887868] EtherCAT 0: Scanning bus. [201480.304873] EtherCAT 0: Bus scanning completed in 416 ms. [201480.304879] EtherCAT 0: Using slave 0 as DC reference clock. [201480.317706] EtherCAT 0: Slave states on main device: PREOP. [201480.350881] EtherCAT ERROR 0-0: SDO download 0x1C12:01 (2 bytes) aborted. [201480.350884] EtherCAT ERROR 0-0: Unknown SDO abort code 0x06010003. [201480.350886] EtherCAT ERROR 0-0: SDO configuration failed. [201485.847646] EtherCAT 0: Master thread exited. [201485.847659] EtherCAT 0: Starting EtherCAT-IDLE thread. [201485.847706] EtherCAT 0: 0 slave(s) responding on main device. Re-scanning on next possibility. [201485.847718] EtherCAT 0: Releasing master... [201485.847720] EtherCAT 0: Released. [201485.865730] EtherCAT 0: 1 slave(s) responding on main device. Re-scanning on next possibility. [201485.865736] EtherCAT 0: Slave states on main device: PREOP. [201485.865738] EtherCAT 0: Re-scanning now. [201485.866406] EtherCAT 0: Scanning bus. [201486.007817] EtherCAT 0: Bus scanning completed in 140 ms. [201486.007822] EtherCAT 0: Using slave 0 as DC reference clock. [201486.757778] EtherCAT WARNING: Datagram 000000002148578e (master-fsm) was SKIPPED 1 time. [201503.039191] EtherCAT: Requesting master 0... [201503.039197] EtherCAT: Successfully requested master 0. [201503.065711] EtherCAT ERROR 0-0: SDO download 0x1C12:01 (2 bytes) aborted. [201503.065715] EtherCAT ERROR 0-0: Unknown SDO abort code 0x06010003. [201503.065717] EtherCAT ERROR 0-0: Failed to process SDO request. [201503.101709] EtherCAT ERROR 0-0: SDO download 0x1C13:01 (2 bytes) aborted. [201503.101713] EtherCAT ERROR 0-0: Unknown SDO abort code 0x06010003. [201503.101715] EtherCAT ERROR 0-0: Failed to process SDO request. [201503.133864] EtherCAT 0: Domain0: Logical address 0x00000000, 24 byte, expected working counter 3. [201503.133869] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 24 byte, type LRW. [201503.133883] EtherCAT 0: Master thread exited. [201503.133885] EtherCAT 0: Starting EtherCAT-OP thread. [201503.133930] EtherCAT WARNING 0: 1 datagram UNMATCHED! [201508.326155] EtherCAT WARNING 0-0: Slave did not sync after 5000 ms. [201508.641703] EtherCAT 0: Slave states on main device: OP. [201701.769697] EtherCAT WARNING 0: 3 datagrams UNMATCHED! [202291.271690] EtherCAT 0: Master thread exited. [202291.271705] EtherCAT 0: Starting EtherCAT-IDLE thread. [202291.271856] EtherCAT ERROR 0-0: Failed to receive AL state datagram: Datagram initialized. [202291.271875] EtherCAT 0: Releasing master... [202291.271877] EtherCAT 0: Released. [202291.277680] EtherCAT 0: Slave states on main device: SAFEOP + ERROR. [202291.286424] EtherCAT ERROR 0-0: AL status message 0x001A: "Synchronization error". [202291.286951] EtherCAT 0-0: Acknowledged state SAFEOP. [202291.297681] EtherCAT 0: Slave states on main device: PREOP. [202291.361690] EtherCAT WARNING: Datagram 000000002148578e (master-fsm) was SKIPPED 1 time. [202295.659362] EtherCAT: Requesting master 0... [202295.659368] EtherCAT: Successfully requested master 0. [202295.697845] EtherCAT 0: Domain0: Logical address 0x00000000, 24 byte, expected working counter 3. [202295.697851] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 24 byte, type LRW. [202295.697868] EtherCAT 0: Master thread exited. [202295.697870] EtherCAT 0: Starting EtherCAT-OP thread. [202295.697922] EtherCAT WARNING 0: 1 datagram UNMATCHED! [202300.978178] EtherCAT WARNING 0-0: Slave did not sync after 5000 ms. [202301.289657] EtherCAT 0: Slave states on main device: OP. [202495.922036] EtherCAT 0: Master thread exited. [202495.922051] EtherCAT 0: Starting EtherCAT-IDLE thread. [202495.922127] EtherCAT 0: 0 slave(s) responding on main device. Re-scanning on next possibility. [202495.922195] EtherCAT 0: Releasing master... [202495.922197] EtherCAT 0: Released. [202495.929939] EtherCAT ERROR 0-0: AL status message 0x001A: "Synchronization error". [202495.930452] EtherCAT 0-0: Acknowledged state SAFEOP. [202495.937665] EtherCAT 0: 1 slave(s) responding on main device. Re-scanning on next possibility. [202495.937672] EtherCAT 0: Slave states on main device: PREOP. [202495.937674] EtherCAT 0: Re-scanning now. [202495.938339] EtherCAT 0: Scanning bus. [202496.082921] EtherCAT 0: Bus scanning completed in 144 ms. [202496.082927] EtherCAT 0: Using slave 0 as DC reference clock. [202496.713691] EtherCAT WARNING: Datagram 000000002148578e (master-fsm) was SKIPPED 1 time. [202698.323235] EtherCAT: Requesting master 0... [202698.323241] EtherCAT: Successfully requested master 0. [202698.357810] EtherCAT 0: Domain0: Logical address 0x00000000, 24 byte, expected working counter 3. [202698.357815] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 24 byte, type LRW. [202698.357829] EtherCAT 0: Master thread exited. [202698.357830] EtherCAT 0: Starting EtherCAT-OP thread. [202698.357873] EtherCAT WARNING 0: 1 datagram UNMATCHED! [202703.546280] EtherCAT WARNING 0-0: Slave did not sync after 5000 ms. [202703.857630] EtherCAT 0: Slave states on main device: OP. [203099.509965] EtherCAT 0: Master thread exited. [203099.509980] EtherCAT 0: Starting EtherCAT-IDLE thread. [203099.510030] EtherCAT 0: 0 slave(s) responding on main device. Re-scanning on next possibility. [203099.510050] EtherCAT 0: Releasing master... [203099.510052] EtherCAT 0: Released. [203099.517899] EtherCAT ERROR 0-0: AL status message 0x001A: "Synchronization error". [203099.518405] EtherCAT 0-0: Acknowledged state SAFEOP. [203099.529634] EtherCAT 0: 1 slave(s) responding on main device. Re-scanning on next possibility. [203099.529641] EtherCAT 0: Slave states on main device: PREOP. [203099.529642] EtherCAT 0: Re-scanning now. [203099.530304] EtherCAT 0: Scanning bus. [203099.671740] EtherCAT 0: Bus scanning completed in 140 ms. [203099.671744] EtherCAT 0: Using slave 0 as DC reference clock. [203099.685634] EtherCAT WARNING: Datagram 000000002148578e (master-fsm) was SKIPPED 1 time. [203110.793945] e1000e 0000:00:19.0 eno1: NIC Link is Down [203110.801644] EtherCAT 0: Link state of ecm0 changed to DOWN. [203110.813759] EtherCAT ERROR 0-0: Failed to receive AL state datagram: Datagram error. [203110.821617] EtherCAT 0: 0 slave(s) responding on main device. Re-scanning on next possibility. [203110.821714] EtherCAT 0: Re-scanning now. [203122.026906] e1000e 0000:00:19.0 eno1: NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [203122.033614] EtherCAT 0: Link state of ecm0 changed to UP. [203122.045647] EtherCAT 0: 1 slave(s) responding on main device. Re-scanning on next possibility. [203122.045650] EtherCAT 0: Slave states on main device: INIT. [203122.045651] EtherCAT 0: Re-scanning now. [203122.046101] EtherCAT 0: Scanning bus. [203122.189461] EtherCAT 0: Bus scanning completed in 140 ms. [203122.189466] EtherCAT 0: Using slave 0 as DC reference clock. [203122.193697] EtherCAT 0: Slave states on main device: PREOP. [203575.773928] e1000e 0000:00:19.0 eno1: NIC Link is Down [203575.781663] EtherCAT 0: Link state of ecm0 changed to DOWN. [203575.789674] EtherCAT ERROR 0-0: Failed to receive AL state datagram: Datagram error. [203575.797662] EtherCAT 0: 0 slave(s) responding on main device. Re-scanning on next possibility. [203575.797771] EtherCAT 0: Re-scanning now. [243153.389138] audit: type=1400 audit(1775881148.274:121): apparmor="DENIED" operation="open" class="file" profile="/usr/sbin/cupsd" name="/etc/paperspecs" pid=30192 comm="cupsd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 [243153.391208] audit: type=1400 audit(1775881148.278:122): apparmor="DENIED" operation="capable" class="cap" profile="/usr/sbin/cupsd" pid=30192 comm="cupsd" capability=12 capname="net_admin" [261340.545034] perf: interrupt took too long (3956 > 3911), lowering kernel.perf_event_max_sample_rate to 50500 [288937.916684] e1000e 0000:00:19.0 eno1: NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [288937.920390] EtherCAT 0: Link state of ecm0 changed to UP. [288937.932411] EtherCAT 0: 1 slave(s) responding on main device. Re-scanning on next possibility. [288937.932415] EtherCAT 0: Slave states on main device: INIT. [288937.932416] EtherCAT 0: Re-scanning now. [288937.932834] EtherCAT 0: Scanning bus. [288938.076618] EtherCAT 0: Bus scanning completed in 144 ms. [288938.076622] EtherCAT 0: Using slave 0 as DC reference clock. [288938.084466] EtherCAT 0: Slave states on main device: PREOP. [289035.650944] EtherCAT: Requesting master 0... [289035.650952] EtherCAT: Successfully requested master 0. [289035.692535] EtherCAT 0: Domain0: Logical address 0x00000000, 24 byte, expected working counter 3. [289035.692540] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 24 byte, type LRW. [289035.692553] EtherCAT 0: Master thread exited. [289035.692555] EtherCAT 0: Starting EtherCAT-OP thread. [289035.692601] EtherCAT WARNING 0: 4 datagrams TIMED OUT! [289035.692602] EtherCAT WARNING 0: 1 datagram UNMATCHED! [289040.972517] EtherCAT WARNING 0-0: Slave did not sync after 5000 ms. [289041.284369] EtherCAT 0: Slave states on main device: OP. [289139.185524] EtherCAT 0: Master thread exited. [289139.185541] EtherCAT 0: Starting EtherCAT-IDLE thread. [289139.185615] EtherCAT 0: Releasing master... [289139.185618] EtherCAT 0: Released. [289139.192648] EtherCAT ERROR 0-0: AL status message 0x001A: "Synchronization error". [289139.193168] EtherCAT 0-0: Acknowledged state SAFEOP. [289139.200381] EtherCAT 0: Slave states on main device: PREOP. [289899.986417] EtherCAT: Requesting master 0... [289899.986423] EtherCAT: Successfully requested master 0. [289900.020513] EtherCAT 0: Domain0: Logical address 0x00000000, 14 byte, expected working counter 3. [289900.020517] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 14 byte, type LRW. [289900.020530] EtherCAT 0: Master thread exited. [289900.020532] EtherCAT 0: Starting EtherCAT-OP thread. [289900.020609] EtherCAT WARNING 0: 1 datagram UNMATCHED! [289900.178476] EtherCAT ERROR 0-0: SDO upload 0x1A01:00 aborted. [289900.178483] EtherCAT ERROR 0-0: SDO abort message 0x06020000: "This object does not exist in the object directory". [289900.178485] EtherCAT ERROR 0-0: Failed to read number of mapped PDO entries. [289900.178487] EtherCAT WARNING 0-0: Failed to read PDO entries for PDO 0x1A01. [289900.182480] EtherCAT ERROR 0-0: SDO download 0x1A01:00 (1 bytes) aborted. [289900.182485] EtherCAT ERROR 0-0: SDO abort message 0x06020000: "This object does not exist in the object directory". [289900.182487] EtherCAT WARNING 0-0: Failed to clear PDO mapping. [289900.182489] EtherCAT WARNING 0-0: Currently mapped PDO entries: (none). Entries to map: 0x6041:00/16 0x6064:00/32 0x6061:00/8 [289900.182497] EtherCAT WARNING 0-0: Failed to configure mapping of PDO 0x1A01. [289905.192470] EtherCAT WARNING 0-0: Slave did not sync after 5000 ms. [289905.197470] EtherCAT ERROR 0-0: Failed to set SAFEOP state, slave refused state change (PREOP + ERROR). [289905.198469] EtherCAT ERROR 0-0: AL status message 0x0024: "Invalid Input Mapping". [289905.200472] EtherCAT 0-0: Acknowledged state PREOP. [289955.398269] EtherCAT 0: Master thread exited. [289955.398281] EtherCAT 0: Starting EtherCAT-IDLE thread. [289955.398384] EtherCAT ERROR 0-0: Failed to receive AL state datagram: Datagram initialized. [289955.398399] EtherCAT 0: Releasing master... [289955.398401] EtherCAT 0: Released. [289956.064343] EtherCAT WARNING: Datagram 000000002148578e (master-fsm) was SKIPPED 1 time. [289964.618584] EtherCAT: Requesting master 0... [289964.618591] EtherCAT: Successfully requested master 0. [289964.644547] EtherCAT 0: Domain0: Logical address 0x00000000, 14 byte, expected working counter 3. [289964.644552] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 14 byte, type LRW. [289964.644567] EtherCAT 0: Master thread exited. [289964.644569] EtherCAT 0: Starting EtherCAT-OP thread. [289964.644677] EtherCAT WARNING 0: 1 datagram UNMATCHED! [289964.755537] EtherCAT ERROR 0-0: SDO download 0x1A01:00 (1 bytes) aborted. [289964.755543] EtherCAT ERROR 0-0: SDO abort message 0x06020000: "This object does not exist in the object directory". [289964.755545] EtherCAT WARNING 0-0: Failed to clear PDO mapping. [289964.755546] EtherCAT WARNING 0-0: Currently mapped PDO entries: 0x6041:00/16 0x6064:00/32 0x6061:00/8. Entries to map: 0x6041:00/16 0x6064:00/32 0x6061:00/8 [289964.755557] EtherCAT WARNING 0-0: Failed to configure mapping of PDO 0x1A01. [289969.768523] EtherCAT WARNING 0-0: Slave did not sync after 5000 ms. [289969.772525] EtherCAT ERROR 0-0: Failed to set SAFEOP state, slave refused state change (PREOP + ERROR). [289969.773523] EtherCAT ERROR 0-0: AL status message 0x0024: "Invalid Input Mapping". [289969.775521] EtherCAT 0-0: Acknowledged state PREOP. [290201.606219] EtherCAT 0: Master thread exited. [290201.606229] EtherCAT 0: Starting EtherCAT-IDLE thread. [290201.606279] EtherCAT 0: 0 slave(s) responding on main device. Re-scanning on next possibility. [290201.606298] EtherCAT 0: Releasing master... [290201.606300] EtherCAT 0: Released. [290201.624337] EtherCAT 0: 1 slave(s) responding on main device. Re-scanning on next possibility. [290201.624343] EtherCAT 0: Slave states on main device: PREOP. [290201.624345] EtherCAT 0: Re-scanning now. [290201.625000] EtherCAT 0: Scanning bus. [290201.716287] EtherCAT WARNING: Datagram 000000002148578e (master-fsm) was SKIPPED 1 time. [290201.755307] EtherCAT ERROR 0-0: SDO upload 0x1A01:00 aborted. [290201.755312] EtherCAT ERROR 0-0: SDO abort message 0x06020000: "This object does not exist in the object directory". [290201.755314] EtherCAT ERROR 0-0: Failed to read number of mapped PDO entries. [290201.755315] EtherCAT ERROR 0-0: Failed to read mapped PDO entries for PDO 0x1A01. [290201.755316] EtherCAT 0: Bus scanning completed in 128 ms. [290201.755318] EtherCAT 0: Using slave 0 as DC reference clock. [290206.283804] EtherCAT: Requesting master 0... [290206.283810] EtherCAT: Successfully requested master 0. [290206.316484] EtherCAT 0: Domain0: Logical address 0x00000000, 14 byte, expected working counter 3. [290206.316489] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 14 byte, type LRW. [290206.316502] EtherCAT 0: Master thread exited. [290206.316503] EtherCAT 0: Starting EtherCAT-OP thread. [290206.316552] EtherCAT WARNING 0: 1 datagram UNMATCHED! [290206.695659] EtherCAT 0: Master thread exited. [290206.695671] EtherCAT 0: Starting EtherCAT-IDLE thread. [290206.695736] EtherCAT 0: Releasing master... [290206.695738] EtherCAT 0: Released. [290229.502696] EtherCAT: Requesting master 0... [290229.502703] EtherCAT: Successfully requested master 0. [290229.536498] EtherCAT 0: Domain0: Logical address 0x00000000, 14 byte, expected working counter 3. [290229.536503] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 14 byte, type LRW. [290229.536519] EtherCAT 0: Master thread exited. [290229.536521] EtherCAT 0: Starting EtherCAT-OP thread. [290229.906137] EtherCAT 0: Master thread exited. [290229.906149] EtherCAT 0: Starting EtherCAT-IDLE thread. [290229.906201] EtherCAT 0: Releasing master... [290229.906203] EtherCAT 0: Released. [290240.051243] EtherCAT: Requesting master 0... [290240.051249] EtherCAT: Successfully requested master 0. [290240.084508] EtherCAT 0: Domain0: Logical address 0x00000000, 14 byte, expected working counter 3. [290240.084513] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 14 byte, type LRW. [290240.084597] EtherCAT 0: Master thread exited. [290240.084599] EtherCAT 0: Starting EtherCAT-OP thread. [290245.256375] EtherCAT WARNING 0-0: Slave did not sync after 5000 ms. [290245.568297] EtherCAT 0: Slave states on main device: OP. [290329.553154] EtherCAT 0: Master thread exited. [290329.553164] EtherCAT 0: Starting EtherCAT-IDLE thread. [290329.553209] EtherCAT 0: 0 slave(s) responding on main device. Re-scanning on next possibility. [290329.553227] EtherCAT 0: Releasing master... [290329.553230] EtherCAT 0: Released. [290329.560681] EtherCAT ERROR 0-0: AL status message 0x001A: "Synchronization error". [290329.561207] EtherCAT 0-0: Acknowledged state SAFEOP. [290329.568328] EtherCAT 0: 1 slave(s) responding on main device. Re-scanning on next possibility. [290329.568334] EtherCAT 0: Slave states on main device: PREOP. [290329.568336] EtherCAT 0: Re-scanning now. [290329.572577] EtherCAT 0: Scanning bus. [290329.580278] EtherCAT WARNING: Datagram 000000002148578e (master-fsm) was SKIPPED 1 time. [290329.703393] EtherCAT 0: Bus scanning completed in 132 ms. [290329.703396] EtherCAT 0: Using slave 0 as DC reference clock. [290767.692572] e1000e 0000:00:19.0 eno1: NIC Link is Down [290767.700346] EtherCAT 0: Link state of ecm0 changed to DOWN. [290767.708346] EtherCAT 0: 0 slave(s) responding on main device. Re-scanning on next possibility. [290767.708467] EtherCAT 0: Re-scanning now. [290775.539606] e1000e 0000:00:19.0 eno1: NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [290775.548273] EtherCAT 0: Link state of ecm0 changed to UP. [290775.560299] EtherCAT 0: 1 slave(s) responding on main device. Re-scanning on next possibility. [290775.560302] EtherCAT 0: Slave states on main device: INIT. [290775.560304] EtherCAT 0: Re-scanning now. [290775.560798] EtherCAT 0: Scanning bus. [290775.704449] EtherCAT 0: Bus scanning completed in 144 ms. [290775.704453] EtherCAT 0: Using slave 0 as DC reference clock. [290775.712296] EtherCAT 0: Slave states on main device: PREOP. [290785.928109] EtherCAT: Requesting master 0... [290785.928115] EtherCAT: Successfully requested master 0. [290785.964500] EtherCAT 0: Domain0: Logical address 0x00000000, 14 byte, expected working counter 3. [290785.964505] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 14 byte, type LRW. [290785.964533] EtherCAT 0: Master thread exited. [290785.964536] EtherCAT 0: Starting EtherCAT-OP thread. [290785.964602] EtherCAT WARNING 0: 1 datagram TIMED OUT! [290785.964604] EtherCAT WARNING 0: 1 datagram UNMATCHED! [290791.213106] EtherCAT WARNING 0-0: Slave did not sync after 5000 ms. [290791.524264] EtherCAT 0: Slave states on main device: OP.