[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-122-rtai (root@moses-6core) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #rtai SMP Tue Jul 27 12:44:07 CDT 2010 (Ubuntu 2.6.32-122.35.rtai-rtai 2.6.32.11+drm33.2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007bf00000 (usable) [ 0.000000] BIOS-e820: 000000007bf00000 - 000000007bf15000 (ACPI data) [ 0.000000] BIOS-e820: 000000007bf15000 - 000000007bf80000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007bf80000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x7bf00 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-E3FFF uncachable [ 0.000000] E4000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009dc00 (usable) [ 0.000000] modified: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d2000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007bf00000 (usable) [ 0.000000] modified: 000000007bf00000 - 000000007bf15000 (ACPI data) [ 0.000000] modified: 000000007bf15000 - 000000007bf80000 (ACPI NVS) [ 0.000000] modified: 000000007bf80000 - 0000000080000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 3736f000 - 37fefdc2 [ 0.000000] Allocated new RAMDISK: 008b5000 - 01535dc2 [ 0.000000] Move RAMDISK from 000000003736f000 - 0000000037fefdc1 to 008b5000 - 01535dc1 [ 0.000000] ACPI: RSDP 000f88f0 00014 (v00 HP ) [ 0.000000] ACPI: RSDT 7bf0bae3 00040 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 7bf14ad4 00074 (v01 HP MCP51M 06040000 PTL_ 000F4240) [ 0.000000] ACPI: DSDT 7bf0bb23 08FB1 (v01 HP MCP51M 06040000 MSFT 03000000) [ 0.000000] ACPI: FACS 7bf15fc0 00040 [ 0.000000] ACPI: SSDT 7bf14b48 00248 (v01 PTLTD POWERNOW 06040000 LTP 00000001) [ 0.000000] ACPI: MCFG 7bf14d90 0003C (v01 HP MCFG 06040000 LTP 00000000) [ 0.000000] ACPI: HPET 7bf14dcc 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001) [ 0.000000] ACPI: APIC 7bf14e04 0005E (v01 HP ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 7bf14e62 00028 (v01 HP $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SLIC 7bf14e8a 00176 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1095MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008b0db8] TEXT DATA BSS ==> [0000100000 - 00008b0db8] [ 0.000000] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000] [ 0.000000] #5 [00008b1000 - 00008b4128] BRK ==> [00008b1000 - 00008b4128] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008b5000 - 0001535dc2] NEW RAMDISK ==> [00008b5000 - 0001535dc2] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] found SMP MP-table at [c00f8920] f8920 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0007bf00 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x0007bf00 [ 0.000000] On node 0 totalpages: 507545 [ 0.000000] free_area_init_node: node 0, pgdat c07470e0, node_mem_map c1537000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3961 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2191 pages used for memmap [ 0.000000] HighMem zone: 278131 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 24 pages/cpu @c2800000 s74936 r0 d23368 u2097152 [ 0.000000] pcpu-alloc: s74936 r0 d23368 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 503578 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-122-rtai root=UUID=81e2ea89-21bd-43da-b756-43e9b88e4946 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 10152960 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0007bf00) [ 0.000000] Memory: 1981600k/2030592k available (4539k kernel code, 47528k reserved, 1928k data, 620k init, 1121288k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc0751000 - 0xc07ec000 ( 620 kB) [ 0.000000] .data : 0xc056ecbc - 0xc0750e68 (1928 kB) [ 0.000000] .text : 0xc0100000 - 0xc056ecbc (4539 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] I-pipe 2.6-03: pipeline enabled. [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2209.650 MHz processor. [ 0.008005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4419.30 BogoMIPS (lpj=8838600) [ 0.008024] Security Framework initialized [ 0.008045] AppArmor: AppArmor initialized [ 0.008052] Mount-cache hash table entries: 512 [ 0.008186] Initializing cgroup subsys ns [ 0.008190] Initializing cgroup subsys cpuacct [ 0.008195] Initializing cgroup subsys memory [ 0.008202] Initializing cgroup subsys devices [ 0.008204] Initializing cgroup subsys freezer [ 0.008207] Initializing cgroup subsys net_cls [ 0.008225] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.008227] CPU: L2 Cache: 512K (64 bytes/line) [ 0.008230] CPU: Physical Processor ID: 0 [ 0.008232] CPU: Processor Core ID: 0 [ 0.008235] mce: CPU supports 5 MCE banks [ 0.008247] using C1E aware idle routine [ 0.008255] Performance Events: AMD PMU driver. [ 0.008262] ... version: 0 [ 0.008264] ... bit width: 48 [ 0.008265] ... generic registers: 4 [ 0.008267] ... value mask: 0000ffffffffffff [ 0.008269] ... max period: 00007fffffffffff [ 0.008271] ... fixed-purpose events: 0 [ 0.008273] ... event mask: 000000000000000f [ 0.008277] Checking 'hlt' instruction... OK. [ 0.024690] ACPI: Core revision 20090903 [ 0.036010] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.036016] ftrace: allocating 21003 entries in 42 pages [ 0.044739] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.045274] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.048001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.048001] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.048001] ..... (found apic 0 pin 2) ... [ 0.088669] ....... works. [ 0.088671] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-64 stepping 02 [ 0.092001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.012000] Initializing CPU#1 [ 0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.012000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.012000] CPU: Physical Processor ID: 0 [ 0.012000] CPU: Processor Core ID: 1 [ 0.176071] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-64 stepping 02 [ 0.176096] Brought up 2 CPUs [ 0.176098] Total of 2 processors activated (8839.68 BogoMIPS). [ 0.176094] System has AMD C1E enabled [ 0.176094] Switch to broadcast mode on CPU1 [ 0.176295] CPU0 attaching sched-domain: [ 0.176298] domain 0: span 0-1 level MC [ 0.176301] groups: 0 1 [ 0.176307] CPU1 attaching sched-domain: [ 0.176309] domain 0: span 0-1 level MC [ 0.176312] groups: 1 0 [ 0.176396] Switch to broadcast mode on CPU0 [ 0.176396] devtmpfs: initialized [ 0.176396] regulator: core version 0.5 [ 0.176396] NET: Registered protocol family 16 [ 0.176396] Trying to unpack rootfs image as initramfs... [ 0.176396] EISA bus registered [ 0.176396] ACPI: bus type pci registered [ 0.176396] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 6 [ 0.176396] PCI: MCFG area at e0000000 reserved in E820 [ 0.176396] PCI: Using MMCONFIG for extended config space [ 0.176396] PCI: Using configuration type 1 for base access [ 0.180110] bio: create slab at 0 [ 0.180870] ACPI: EC: Look up EC in DSDT [ 0.183802] ACPI: BIOS _OSI(Linux) query ignored [ 0.184191] ACPI: Interpreter enabled [ 0.184193] ACPI: (supports S0 S5) [ 0.184203] ACPI: Using IOAPIC for interrupt routing [ 0.190901] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62 [ 0.191162] ACPI: No dock devices found. [ 0.191270] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.191530] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.191534] pci 0000:00:02.0: PME# disabled [ 0.191570] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.191573] pci 0000:00:03.0: PME# disabled [ 0.191592] pci 0000:00:05.0: reg 10 32bit mmio: [0xb2000000-0xb2ffffff] [ 0.191598] pci 0000:00:05.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff] [ 0.191604] pci 0000:00:05.0: reg 1c 64bit mmio: [0xb1000000-0xb1ffffff] [ 0.191609] pci 0000:00:05.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.191790] pci 0000:00:0a.0: reg 10 io port: [0x1d00-0x1d7f] [ 0.191849] pci 0000:00:0a.1: reg 20 io port: [0x3040-0x307f] [ 0.191855] pci 0000:00:0a.1: reg 24 io port: [0x3000-0x303f] [ 0.191879] pci 0000:00:0a.1: PME# supported from D3hot D3cold [ 0.191885] pci 0000:00:0a.1: PME# disabled [ 0.191917] pci 0000:00:0a.3: reg 10 32bit mmio: [0xb0040000-0xb007ffff] [ 0.192020] pci 0000:00:0b.0: reg 10 32bit mmio: [0xb0004000-0xb0004fff] [ 0.192054] pci 0000:00:0b.0: supports D1 D2 [ 0.192057] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.192061] pci 0000:00:0b.0: PME# disabled [ 0.192091] pci 0000:00:0b.1: reg 10 32bit mmio: [0xb0005000-0xb00050ff] [ 0.192124] pci 0000:00:0b.1: supports D1 D2 [ 0.192127] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.192131] pci 0000:00:0b.1: PME# disabled [ 0.192169] pci 0000:00:0d.0: reg 20 io port: [0x3080-0x308f] [ 0.192212] pci 0000:00:0e.0: reg 10 io port: [0x30c0-0x30c7] [ 0.192217] pci 0000:00:0e.0: reg 14 io port: [0x30b4-0x30b7] [ 0.192222] pci 0000:00:0e.0: reg 18 io port: [0x30b8-0x30bf] [ 0.192227] pci 0000:00:0e.0: reg 1c io port: [0x30b0-0x30b3] [ 0.192232] pci 0000:00:0e.0: reg 20 io port: [0x3090-0x309f] [ 0.192237] pci 0000:00:0e.0: reg 24 32bit mmio: [0xb0006000-0xb0006fff] [ 0.192286] pci 0000:00:0f.0: reg 10 io port: [0x30d8-0x30df] [ 0.192291] pci 0000:00:0f.0: reg 14 io port: [0x30cc-0x30cf] [ 0.192296] pci 0000:00:0f.0: reg 18 io port: [0x30d0-0x30d7] [ 0.192301] pci 0000:00:0f.0: reg 1c io port: [0x30c8-0x30cb] [ 0.192306] pci 0000:00:0f.0: reg 20 io port: [0x30a0-0x30af] [ 0.192311] pci 0000:00:0f.0: reg 24 32bit mmio: [0xb0007000-0xb0007fff] [ 0.192401] pci 0000:00:10.1: reg 10 32bit mmio: [0xb0000000-0xb0003fff] [ 0.192436] pci 0000:00:10.1: PME# supported from D3hot D3cold [ 0.192440] pci 0000:00:10.1: PME# disabled [ 0.192472] pci 0000:00:14.0: reg 10 32bit mmio: [0xb0008000-0xb0008fff] [ 0.192477] pci 0000:00:14.0: reg 14 io port: [0x30e0-0x30e7] [ 0.192500] pci 0000:00:14.0: supports D1 D2 [ 0.192502] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.192506] pci 0000:00:14.0: PME# disabled [ 0.192617] pci 0000:00:02.0: bridge io port: [0x4000-0x4fff] [ 0.192620] pci 0000:00:02.0: bridge 32bit mmio: [0xb4000000-0xb5ffffff] [ 0.192624] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xd01fffff] [ 0.192663] pci 0000:03:00.0: reg 10 64bit mmio: [0xb6000000-0xb6003fff] [ 0.192708] pci 0000:03:00.0: supports D1 D2 [ 0.192759] pci 0000:00:03.0: bridge 32bit mmio: [0xb6000000-0xb7ffffff] [ 0.192793] pci 0000:07:05.0: reg 10 32bit mmio: [0xb8000000-0xb80007ff] [ 0.192828] pci 0000:07:05.0: supports D1 D2 [ 0.192831] pci 0000:07:05.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.192835] pci 0000:07:05.0: PME# disabled [ 0.192861] pci 0000:07:05.1: reg 10 32bit mmio: [0xb8000800-0xb80008ff] [ 0.192897] pci 0000:07:05.1: supports D1 D2 [ 0.192899] pci 0000:07:05.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.192903] pci 0000:07:05.1: PME# disabled [ 0.192929] pci 0000:07:05.2: reg 10 32bit mmio: [0xb8000c00-0xb8000cff] [ 0.192965] pci 0000:07:05.2: supports D1 D2 [ 0.192967] pci 0000:07:05.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.192971] pci 0000:07:05.2: PME# disabled [ 0.192998] pci 0000:07:05.3: reg 10 32bit mmio: [0xb8001000-0xb80010ff] [ 0.193033] pci 0000:07:05.3: supports D1 D2 [ 0.193035] pci 0000:07:05.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.193039] pci 0000:07:05.3: PME# disabled [ 0.193066] pci 0000:07:05.4: reg 10 32bit mmio: [0xb8001400-0xb80014ff] [ 0.193101] pci 0000:07:05.4: supports D1 D2 [ 0.193104] pci 0000:07:05.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.193107] pci 0000:07:05.4: PME# disabled [ 0.193142] pci 0000:00:10.0: transparent bridge [ 0.193146] pci 0000:00:10.0: bridge 32bit mmio: [0xb8000000-0xb80fffff] [ 0.193156] pci_bus 0000:00: on NUMA node 0 [ 0.193160] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.193263] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] [ 0.193302] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] [ 0.193338] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] [ 0.230401] ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *0, disabled. [ 0.230582] ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *11 [ 0.230764] ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *11 [ 0.230943] ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled. [ 0.231123] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled. [ 0.231303] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled. [ 0.231481] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *11 [ 0.231661] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *0, disabled. [ 0.231840] ACPI: PCI Interrupt Link [LSMB] (IRQs *10) [ 0.232026] ACPI: PCI Interrupt Link [LPMU] (IRQs 11) *10 [ 0.232204] ACPI: PCI Interrupt Link [LUS0] (IRQs 22) *11 [ 0.232385] ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7 [ 0.232562] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *10 [ 0.232742] ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *0, disabled. [ 0.232920] ACPI: PCI Interrupt Link [LACI] (IRQs 21) *0, disabled. [ 0.233100] ACPI: PCI Interrupt Link [LMCI] (IRQs 21) *0, disabled. [ 0.233278] ACPI: PCI Interrupt Link [LPID] (IRQs 21) *0, disabled. [ 0.233468] ACPI: PCI Interrupt Link [LTID] (IRQs 23) *5 [ 0.233647] ACPI: PCI Interrupt Link [LSI1] (IRQs 20) *10 [ 0.233766] vgaarb: device added: PCI:0000:00:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.233778] vgaarb: loaded [ 0.233900] SCSI subsystem initialized [ 0.234011] libata version 3.00 loaded. [ 0.234085] usbcore: registered new interface driver usbfs [ 0.234098] usbcore: registered new interface driver hub [ 0.234123] usbcore: registered new device driver usb [ 0.234282] ACPI: WMI: Mapper loaded [ 0.234284] PCI: Using ACPI for IRQ routing [ 0.234467] NetLabel: Initializing [ 0.234469] NetLabel: domain hash size = 128 [ 0.234471] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.234485] NetLabel: unlabeled traffic allowed by default [ 0.236497] AppArmor: AppArmor Filesystem Enabled [ 0.236512] pnp: PnP ACPI init [ 0.236529] ACPI: bus type pnp registered [ 0.238320] pnp: PnP ACPI: found 13 devices [ 0.238322] ACPI: ACPI bus type pnp unregistered [ 0.238325] PnPBIOS: Disabled by ACPI PNP [ 0.238338] system 00:00: iomem range 0xe0000000-0xefffffff has been reserved [ 0.238344] system 00:01: iomem range 0xffc00000-0xffffffff could not be reserved [ 0.238348] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.238351] system 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved [ 0.238355] system 00:01: iomem range 0xfed00000-0xfed00fff has been reserved [ 0.238360] system 00:03: iomem range 0xe0000000-0xefffffff has been reserved [ 0.238366] system 00:04: ioport range 0x1000-0x107f has been reserved [ 0.238369] system 00:04: ioport range 0x1080-0x10ff has been reserved [ 0.238372] system 00:04: ioport range 0x1400-0x147f has been reserved [ 0.238375] system 00:04: ioport range 0x1480-0x14ff has been reserved [ 0.238378] system 00:04: ioport range 0x1800-0x187f has been reserved [ 0.238381] system 00:04: ioport range 0x1880-0x18ff has been reserved [ 0.238384] system 00:04: ioport range 0x2000-0x203f has been reserved [ 0.238390] system 00:05: ioport range 0x360-0x361 has been reserved [ 0.238393] system 00:05: ioport range 0x380-0x383 has been reserved [ 0.238395] system 00:05: ioport range 0x4d0-0x4d1 has been reserved [ 0.274000] Switching to clocksource acpi_pm [ 0.274188] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 [ 0.274188] pci 0000:00:02.0: IO window: 0x4000-0x4fff [ 0.274188] pci 0000:00:02.0: MEM window: 0xb4000000-0xb5ffffff [ 0.274188] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000d01fffff [ 0.274188] pci 0000:00:03.0: PCI bridge, secondary bus 0000:03 [ 0.274188] pci 0000:00:03.0: IO window: disabled [ 0.274188] pci 0000:00:03.0: MEM window: 0xb6000000-0xb7ffffff [ 0.274188] pci 0000:00:03.0: PREFETCH window: disabled [ 0.274188] pci 0000:00:10.0: PCI bridge, secondary bus 0000:07 [ 0.274188] pci 0000:00:10.0: IO window: disabled [ 0.274188] pci 0000:00:10.0: MEM window: 0xb8000000-0xb80fffff [ 0.274188] pci 0000:00:10.0: PREFETCH window: disabled [ 0.274188] pci 0000:00:02.0: setting latency timer to 64 [ 0.274188] pci 0000:00:03.0: setting latency timer to 64 [ 0.274188] pci 0000:00:10.0: setting latency timer to 64 [ 0.274188] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.274188] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.274188] pci_bus 0000:01: resource 0 io: [0x4000-0x4fff] [ 0.274188] pci_bus 0000:01: resource 1 mem: [0xb4000000-0xb5ffffff] [ 0.274188] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xd01fffff] [ 0.274188] pci_bus 0000:03: resource 1 mem: [0xb6000000-0xb7ffffff] [ 0.274188] pci_bus 0000:07: resource 1 mem: [0xb8000000-0xb80fffff] [ 0.274188] pci_bus 0000:07: resource 3 io: [0x00-0xffff] [ 0.274188] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffff] [ 0.274188] NET: Registered protocol family 2 [ 0.274188] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.274188] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.274188] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.274188] TCP: Hash tables configured (established 131072 bind 65536) [ 0.274188] TCP reno registered [ 0.274188] NET: Registered protocol family 1 [ 0.274188] pci 0000:00:00.0: Found disabled HT MSI Mapping [ 0.274188] pci 0000:00:00.0: Enabling HT MSI Mapping [ 0.274188] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.274188] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.274188] pci 0000:00:05.0: Boot video device [ 0.484113] pci 0000:00:09.0: Found enabled HT MSI Mapping [ 0.484171] pci 0000:00:09.0: Found enabled HT MSI Mapping [ 0.484230] pci 0000:00:09.0: Found enabled HT MSI Mapping [ 0.484292] pci 0000:00:09.0: Found enabled HT MSI Mapping [ 0.484342] Simple Boot Flag at 0x36 set to 0x1 [ 0.484555] Scanning for low memory corruption every 60 seconds [ 0.484659] audit: initializing netlink socket (disabled) [ 0.484670] type=2000 audit(1399923830.481:1): initialized [ 0.492632] highmem bounce pool size: 64 pages [ 0.492637] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.494171] VFS: Disk quotas dquot_6.5.2 [ 0.494226] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.494782] fuse init (API version 7.13) [ 0.494869] msgmni has been set to 1682 [ 0.495090] alg: No test for stdrng (krng) [ 0.495144] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.495147] io scheduler noop registered [ 0.495149] io scheduler anticipatory registered [ 0.495151] io scheduler deadline registered [ 0.495189] io scheduler cfq registered (default) [ 0.495346] alloc irq_desc for 24 on node -1 [ 0.495348] alloc kstat_irqs on node -1 [ 0.495358] pcieport 0000:00:02.0: irq 24 for MSI/MSI-X [ 0.495364] pcieport 0000:00:02.0: setting latency timer to 64 [ 0.495433] alloc irq_desc for 25 on node -1 [ 0.495435] alloc kstat_irqs on node -1 [ 0.495439] pcieport 0000:00:03.0: irq 25 for MSI/MSI-X [ 0.495444] pcieport 0000:00:03.0: setting latency timer to 64 [ 0.495497] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.495522] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.495596] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.495601] ACPI: Power Button [PWRB] [ 0.495651] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.495654] ACPI: Sleep Button [SLPB] [ 0.495705] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 0.496053] ACPI: Lid Switch [LID] [ 0.496132] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.496135] ACPI: Power Button [PWRF] [ 0.497561] hpet_acpi_add: no address or irqs in _CRS [ 0.497629] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.498960] brd: module loaded [ 0.499458] loop: module loaded [ 0.499567] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 0.499759] pata_acpi 0000:00:0d.0: setting latency timer to 64 [ 0.499783] pata_acpi 0000:00:0e.0: enabling device (0005 -> 0007) [ 0.500200] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 23 [ 0.500205] alloc irq_desc for 23 on node -1 [ 0.500207] alloc kstat_irqs on node -1 [ 0.500219] pata_acpi 0000:00:0e.0: PCI INT A -> Link[LTID] -> GSI 23 (level, high) -> IRQ 23 [ 0.500237] pata_acpi 0000:00:0e.0: setting latency timer to 64 [ 0.500245] pata_acpi 0000:00:0e.0: PCI INT A disabled [ 0.500578] ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 20 [ 0.500581] alloc irq_desc for 20 on node -1 [ 0.500583] alloc kstat_irqs on node -1 [ 0.500591] pata_acpi 0000:00:0f.0: PCI INT A -> Link[LSI1] -> GSI 20 (level, high) -> IRQ 20 [ 0.500608] pata_acpi 0000:00:0f.0: setting latency timer to 64 [ 0.500615] pata_acpi 0000:00:0f.0: PCI INT A disabled [ 0.500942] Fixed MDIO Bus: probed [ 0.500977] PPP generic driver version 2.4.2 [ 0.501013] tun: Universal TUN/TAP device driver, 1.6 [ 0.501015] tun: (C) 1999-2004 Max Krasnyansky [ 0.501100] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.501437] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22 [ 0.501440] alloc irq_desc for 22 on node -1 [ 0.501442] alloc kstat_irqs on node -1 [ 0.501450] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, high) -> IRQ 22 [ 0.501468] ehci_hcd 0000:00:0b.1: setting latency timer to 64 [ 0.501471] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 0.501506] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 [ 0.501533] ehci_hcd 0000:00:0b.1: debug port 1 [ 0.501540] ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported [ 0.501564] ehci_hcd 0000:00:0b.1: irq 22, io mem 0xb0005000 [ 0.501618] isapnp: Scanning for PnP cards... [ 0.550492] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00 [ 0.550588] usb usb1: configuration #1 chosen from 1 choice [ 0.550618] hub 1-0:1.0: USB hub found [ 0.550628] hub 1-0:1.0: 8 ports detected [ 0.550694] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.551047] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22 [ 0.551051] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LUS0] -> GSI 22 (level, high) -> IRQ 22 [ 0.551061] ohci_hcd 0000:00:0b.0: setting latency timer to 64 [ 0.551064] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 0.551097] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 [ 0.551112] ohci_hcd 0000:00:0b.0: irq 22, io mem 0xb0004000 [ 0.640039] usb usb2: configuration #1 chosen from 1 choice [ 0.640067] hub 2-0:1.0: USB hub found [ 0.640077] hub 2-0:1.0: 8 ports detected [ 0.640145] uhci_hcd: USB Universal Host Controller Interface driver [ 0.640224] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 0.654155] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.654161] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.654287] mice: PS/2 mouse device common for all mice [ 0.655181] rtc_cmos 00:09: RTC can wake from S4 [ 0.655221] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0 [ 0.655254] rtc0: alarms up to one year, y3k, 114 bytes nvram [ 0.655358] device-mapper: uevent: version 1.0.3 [ 0.694521] Freeing initrd memory: 12803k freed [ 0.698929] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.733097] device-mapper: multipath: version 1.1.0 loaded [ 0.733101] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.733302] EISA: Probing bus 0 at eisa.0 [ 0.733310] Cannot allocate resource for EISA slot 1 [ 0.733312] Cannot allocate resource for EISA slot 2 [ 0.733315] Cannot allocate resource for EISA slot 3 [ 0.733317] Cannot allocate resource for EISA slot 4 [ 0.733331] EISA: Detected 0 cards. [ 0.733334] cpuidle: using governor ladder [ 0.733336] cpuidle: using governor menu [ 0.733757] TCP cubic registered [ 0.733914] NET: Registered protocol family 10 [ 0.734336] lo: Disabled Privacy Extensions [ 0.734627] NET: Registered protocol family 17 [ 0.734664] Using IPI No-Shortcut mode [ 0.734773] registered taskstats version 1 [ 0.735219] rtc_cmos 00:09: setting system clock to 2014-05-12 19:43:51 UTC (1399923831) [ 0.735223] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.735224] EDD information not available. [ 0.739317] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 0.872664] isapnp: No Plug & Play device found [ 0.872680] Freeing unused kernel memory: 620k freed [ 0.873178] Write protecting the kernel text: 4540k [ 0.873215] Write protecting the kernel read-only data: 1668k [ 0.894207] udev: starting version 151 [ 0.896080] usb 1-4: new high speed USB device using ehci_hcd and address 2 [ 1.039510] acpi device:22: registered as cooling_device0 [ 1.039653] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input6 [ 1.039700] ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no) [ 1.041680] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19 [ 1.041687] alloc irq_desc for 19 on node -1 [ 1.041689] alloc kstat_irqs on node -1 [ 1.041702] b43-pci-bridge 0000:03:00.0: PCI INT A -> Link[LK4E] -> GSI 19 (level, high) -> IRQ 19 [ 1.041711] b43-pci-bridge 0000:03:00.0: setting latency timer to 64 [ 1.043872] pata_amd 0000:00:0d.0: version 0.4.1 [ 1.043913] pata_amd 0000:00:0d.0: setting latency timer to 64 [ 1.048541] scsi0 : pata_amd [ 1.048681] scsi1 : pata_amd [ 1.049410] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3080 irq 14 [ 1.049413] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3088 irq 15 [ 1.049649] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.049977] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 [ 1.049983] forcedeth 0000:00:14.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, high) -> IRQ 20 [ 1.049988] forcedeth 0000:00:14.0: setting latency timer to 64 [ 1.050053] nv_probe: set workaround bit for reversed mac addr [ 1.050981] Linux agpgart interface v0.103 [ 1.054320] usb 1-4: configuration #1 chosen from 1 choice [ 1.100122] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0 [ 1.212361] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NC08, max MWDMA2 [ 1.212388] ata1: nv_mode_filter: 0x39f&0x739f->0x39f, BIOS=0x0 (0xc600) ACPI=0x39f (120:600:0x12) [ 1.228314] ata1.00: configured for MWDMA2 [ 1.233706] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NC08 PQ: 0 ANSI: 5 [ 1.244712] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.244716] Uniform CD-ROM driver Revision: 3.20 [ 1.244836] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.244906] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.245027] ata2: port disabled. ignoring. [ 1.249691] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5 [ 1.249708] ohci1394 0000:07:05.0: PCI INT A -> Link[LNK1] -> GSI 5 (level, high) -> IRQ 5 [ 1.267424] [drm] Initialized drm 1.1.0 20060810 [ 1.307091] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[b8000000-b80007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 1.569096] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1b:24:06:0c:44 [ 1.569101] forcedeth 0000:00:14.0: highdma pwrctl lnktim desc-v3 [ 1.569134] sata_nv 0000:00:0e.0: version 3.5 [ 1.569151] sata_nv 0000:00:0e.0: PCI INT A -> Link[LTID] -> GSI 23 (level, high) -> IRQ 23 [ 1.569154] sata_nv 0000:00:0e.0: Using SWNCQ mode [ 1.569227] sata_nv 0000:00:0e.0: setting latency timer to 64 [ 1.569429] scsi2 : sata_nv [ 1.569513] scsi3 : sata_nv [ 1.569747] ata3: SATA max UDMA/133 cmd 0x30c0 ctl 0x30b4 bmdma 0x3090 irq 23 [ 1.569751] ata4: SATA max UDMA/133 cmd 0x30b8 ctl 0x30b0 bmdma 0x3098 irq 23 [ 1.569863] nouveau 0000:00:05.0: power state changed by ACPI to D0 [ 1.570161] ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 18 [ 1.570166] alloc irq_desc for 18 on node -1 [ 1.570169] alloc kstat_irqs on node -1 [ 1.570179] nouveau 0000:00:05.0: PCI INT A -> Link[LK3E] -> GSI 18 (level, high) -> IRQ 18 [ 1.570183] nouveau 0000:00:05.0: setting latency timer to 64 [ 1.572226] [drm] nouveau 0000:00:05.0: failed to evaluate _DSM: 5 [ 1.572570] [drm] nouveau 0000:00:05.0: Detected an NV40 generation card (0x04e000a2) [ 1.573079] [drm] nouveau 0000:00:05.0: Attempting to load BIOS image from PROM [ 1.573083] [drm] nouveau 0000:00:05.0: ... BIOS signature not found [ 1.573085] [drm] nouveau 0000:00:05.0: Attempting to load BIOS image from PRAMIN [ 1.612468] [drm] nouveau 0000:00:05.0: ... appears to be valid [ 1.612473] [drm] nouveau 0000:00:05.0: BIT BIOS found [ 1.612475] [drm] nouveau 0000:00:05.0: Bios version 05.51.28.53 [ 1.612479] [drm] nouveau 0000:00:05.0: TMDS table script pointers not stubbed [ 1.612481] [drm] nouveau 0000:00:05.0: BIT table 'd' not found [ 1.612484] [drm] nouveau 0000:00:05.0: Found Display Configuration Block version 3.0 [ 1.612488] [drm] nouveau 0000:00:05.0: DCB connector table: VHER 0x30 5 10 2 [ 1.612491] [drm] nouveau 0000:00:05.0: 0: 0x00000000: type 0x00 idx 0 tag 0xff [ 1.612494] [drm] nouveau 0000:00:05.0: 1: 0x00000131: type 0x31 idx 1 tag 0xff [ 1.612497] [drm] nouveau 0000:00:05.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff [ 1.612500] [drm] nouveau 0000:00:05.0: 3: 0x00000211: type 0x11 idx 2 tag 0xff [ 1.612503] [drm] nouveau 0000:00:05.0: 4: 0x00000213: type 0x13 idx 2 tag 0xff [ 1.612506] [drm] nouveau 0000:00:05.0: 5: 0x00000340: type 0x40 idx 3 tag 0xff [ 1.612509] [drm] nouveau 0000:00:05.0: Raw DCB entry 0: 03005313 00000004 [ 1.612512] [drm] nouveau 0000:00:05.0: Raw DCB entry 1: 02010300 00000023 [ 1.612515] [drm] nouveau 0000:00:05.0: Raw DCB entry 2: 024123f1 0040c080 [ 1.612521] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 0 at offset 0xE225 [ 1.612581] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 1 at offset 0xE364 [ 1.612583] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 2 at offset 0xE365 [ 1.612734] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 3 at offset 0xE4E7 [ 1.612737] [drm] nouveau 0000:00:05.0: === C51 misaligned reg 0x00001305 not verified === [ 1.612739] [drm] nouveau 0000:00:05.0: === C51 misaligned reg 0x00001401 not verified === [ 1.612742] [drm] nouveau 0000:00:05.0: === C51 misaligned reg 0x00001405 not verified === [ 1.612744] [drm] nouveau 0000:00:05.0: === C51 misaligned reg 0x00001409 not verified === [ 1.612747] [drm] nouveau 0000:00:05.0: === C51 misaligned reg 0x0000140D not verified === [ 1.612755] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 4 at offset 0xE533 [ 1.629489] [TTM] Zone kernel: Available graphics memory: 437392 kiB. [ 1.629492] [TTM] Zone highmem: Available graphics memory: 998036 kiB. [ 1.629503] [drm] nouveau 0000:00:05.0: 64 MiB VRAM [ 1.631770] [drm] nouveau 0000:00:05.0: 64 MiB GART (aperture) [ 1.632207] [drm] nouveau 0000:00:05.0: Allocating FIFO number 0 [ 1.632766] [drm] nouveau 0000:00:05.0: nouveau_channel_alloc: initialised FIFO 0 [ 1.632774] [drm] nouveau 0000:00:05.0: Initial CRTC_OWNER is 0 [ 1.632779] [drm] nouveau 0000:00:05.0: Saving VGA fonts [ 1.669244] [drm] nouveau 0000:00:05.0: Detected a LVDS connector [ 1.778608] [drm] nouveau 0000:00:05.0: Detected a VGA connector [ 1.778640] [drm] nouveau 0000:00:05.0: Detected a TV connector [ 1.779534] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on lvds encoder (output 0) [ 1.779537] [drm] nouveau 0000:00:05.0: Calling LVDS script 6: [ 1.779541] [drm] nouveau 0000:00:05.0: 0xD3CD: Parsing digital output script table [ 2.040085] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.048255] ata3.00: ATA-7: FUJITSU MHW2120BH, 8918, max UDMA/100 [ 2.048258] ata3.00: 234441648 sectors, multi 16: LBA48 [ 2.064274] ata3.00: configured for UDMA/100 [ 2.064404] scsi 2:0:0:0: Direct-Access ATA FUJITSU MHW2120B 8918 PQ: 0 ANSI: 5 [ 2.064514] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder (output 1) [ 2.064520] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on TV encoder (output 2) [ 2.064576] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 2.064763] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 2.064809] sd 2:0:0:0: [sda] Write Protect is off [ 2.064811] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.064834] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.064966] sda: sda1 sda2 < sda5 > [ 2.065858] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.224300] [drm] nouveau 0000:00:05.0: allocated 1440x1024 fb: 0x49000, bo f694f200 [ 2.224476] fb0: nouveaufb frame buffer device [ 2.224478] registered panic notifier [ 2.224485] [drm] Initialized nouveau 0.0.15 20090420 for 0000:00:05.0 on minor 0 [ 2.224522] sata_nv 0000:00:0f.0: PCI INT A -> Link[LSI1] -> GSI 20 (level, high) -> IRQ 20 [ 2.224526] sata_nv 0000:00:0f.0: Using SWNCQ mode [ 2.224588] sata_nv 0000:00:0f.0: setting latency timer to 64 [ 2.224783] scsi4 : sata_nv [ 2.224862] scsi5 : sata_nv [ 2.225084] ata5: SATA max UDMA/133 cmd 0x30d8 ctl 0x30cc bmdma 0x30a0 irq 20 [ 2.225088] ata6: SATA max UDMA/133 cmd 0x30d0 ctl 0x30c8 bmdma 0x30a8 irq 20 [ 2.387006] ata4: SATA link down (SStatus 0 SControl 300) [ 2.580541] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b0009e40400] [ 2.692126] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.700359] ata5.00: ATA-7: FUJITSU MHW2120BH, 8918, max UDMA/100 [ 2.700362] ata5.00: 234441648 sectors, multi 16: LBA48 [ 2.716364] ata5.00: configured for UDMA/100 [ 2.716475] scsi 4:0:0:0: Direct-Access ATA FUJITSU MHW2120B 8918 PQ: 0 ANSI: 5 [ 2.716638] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 2.716711] sd 4:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 2.716759] sd 4:0:0:0: [sdb] Write Protect is off [ 2.716762] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.716785] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.717275] sdb: sdb1 sdb2 < sdb5 sdb6 > [ 2.844476] sd 4:0:0:0: [sdb] Attached SCSI disk [ 3.038628] ata6: SATA link down (SStatus 0 SControl 300) [ 3.040443] vga16fb: initializing [ 3.040447] vga16fb: mapped to 0xc00a0000 [ 3.040453] vga16fb: not registering due to another framebuffer present [ 3.061104] [drm] nouveau 0000:00:05.0: Output LVDS-1 is running on CRTC 0 using output A [ 3.061108] [drm] nouveau 0000:00:05.0: Calling LVDS script 2: [ 3.061111] [drm] nouveau 0000:00:05.0: 0xD447: Parsing digital output script table [ 3.232026] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on lvds encoder (output 0) [ 3.232031] [drm] nouveau 0000:00:05.0: Calling LVDS script 5: [ 3.232034] [drm] nouveau 0000:00:05.0: 0xD3B6: Parsing digital output script table [ 3.280063] [drm] nouveau 0000:00:05.0: Output LVDS-1 is running on CRTC 0 using output A [ 3.290333] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on vga encoder (output 1) [ 3.290337] [drm] nouveau 0000:00:05.0: Output VGA-1 is running on CRTC 1 using output B [ 3.294008] Console: switching to colour frame buffer device 160x56 [ 3.608302] xor: automatically using best checksumming function: pIII_sse [ 3.625017] pIII_sse : 6776.000 MB/sec [ 3.625020] xor: using function: pIII_sse (6776.000 MB/sec) [ 3.627723] device-mapper: dm-raid45: initialized v0.2594b [ 3.831587] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 5.602082] Adding 4805624k swap on /dev/sda5. Priority:-1 extents:1 across:4805624k [ 5.775913] udev: starting version 151 [ 6.876351] type=1505 audit(1399941837.640:2): operation="profile_load" pid=637 name="/sbin/dhclient3" [ 6.876610] type=1505 audit(1399941837.640:3): operation="profile_load" pid=637 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 6.876756] type=1505 audit(1399941837.640:4): operation="profile_load" pid=637 name="/usr/lib/connman/scripts/dhclient-script" [ 7.023176] Linux video capture interface: v2.00 [ 7.083672] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0) [ 7.085721] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:0b.1/usb1/1-4/1-4:1.0/input/input7 [ 7.085823] usbcore: registered new interface driver uvcvideo [ 7.085872] USB Video Class driver (v0.1.0) [ 7.304845] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000 [ 7.368875] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 [ 7.446567] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 7.447437] i2c i2c-2: nForce2 SMBus adapter at 0x3040 [ 7.447459] i2c i2c-3: nForce2 SMBus adapter at 0x3000 [ 7.449596] cfg80211: Calling CRDA to update world regulatory domain [ 7.458467] ricoh-mmc: Ricoh MMC Controller disabling driver [ 7.458471] ricoh-mmc: Copyright(c) Philip Langdale [ 7.458505] ricoh-mmc: Ricoh MMC controller found at 0000:07:05.2 [1180:0843] (rev 1) [ 7.458521] ricoh-mmc: Controller is now disabled. [ 7.461146] sdhci: Secure Digital Host Controller Interface driver [ 7.461150] sdhci: Copyright(c) Pierre Ossman [ 7.557878] lp: driver loaded but no devices found [ 7.559258] b43-phy0: Broadcom 4311 WLAN found (core revision 13) [ 7.632961] sdhci-pci 0000:07:05.1: SDHCI controller found [1180:0822] (rev 19) [ 7.633377] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7 [ 7.633391] sdhci-pci 0000:07:05.1: PCI INT B -> Link[LNK2] -> GSI 7 (level, high) -> IRQ 7 [ 7.635526] Registered led device: mmc0:: [ 7.636609] mmc0: SDHCI controller on PCI [0000:07:05.1] using PIO [ 8.452840] phy0: Selected rate control algorithm 'minstrel' [ 8.453559] Registered led device: b43-phy0::tx [ 8.453580] Registered led device: b43-phy0::rx [ 8.453601] Registered led device: b43-phy0::radio [ 8.453677] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ] [ 8.599583] cfg80211: World regulatory domain updated: [ 8.599588] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 8.599591] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.599595] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8.599598] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8.599600] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.599603] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.725893] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 [ 9.725899] alloc irq_desc for 21 on node -1 [ 9.725902] alloc kstat_irqs on node -1 [ 9.725914] HDA Intel 0000:00:10.1: PCI INT B -> Link[LAZA] -> GSI 21 (level, high) -> IRQ 21 [ 9.725918] hda_intel: Disable MSI for Nvidia chipset [ 9.725970] HDA Intel 0000:00:10.1: setting latency timer to 64 [ 12.428076] b43 ssb0:0: firmware: requesting b43/ucode13.fw [ 12.606395] b43 ssb0:0: firmware: requesting b43-open/ucode13.fw [ 12.608750] b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found [ 12.608771] b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found [ 12.608782] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. [ 13.180078] b43 ssb0:0: firmware: requesting b43/ucode13.fw [ 13.182121] b43 ssb0:0: firmware: requesting b43-open/ucode13.fw [ 13.184392] b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found [ 13.184413] b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found [ 13.184423] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. [ 13.320198] type=1505 audit(1399941844.084:5): operation="profile_load" pid=1123 name="/usr/share/gdm/guest-session/Xsession" [ 13.322070] type=1505 audit(1399941844.084:6): operation="profile_replace" pid=1126 name="/sbin/dhclient3" [ 13.322332] type=1505 audit(1399941844.084:7): operation="profile_replace" pid=1126 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 13.322490] type=1505 audit(1399941844.084:8): operation="profile_replace" pid=1126 name="/usr/lib/connman/scripts/dhclient-script" [ 13.494163] type=1505 audit(1399941844.257:9): operation="profile_load" pid=1127 name="/usr/bin/evince" [ 13.497751] type=1505 audit(1399941844.260:10): operation="profile_load" pid=1127 name="/usr/bin/evince-previewer" [ 13.500054] type=1505 audit(1399941844.264:11): operation="profile_load" pid=1127 name="/usr/bin/evince-thumbnailer" [ 13.618130] type=1505 audit(1399941844.381:12): operation="profile_load" pid=1130 name="/usr/lib/cups/backend/cups-pdf" [ 13.618461] type=1505 audit(1399941844.381:13): operation="profile_load" pid=1130 name="/usr/sbin/cupsd" [ 13.744743] type=1505 audit(1399941844.509:14): operation="profile_load" pid=1131 name="/usr/sbin/tcpdump" [ 14.990907] [drm] nouveau 0000:00:05.0: Allocating FIFO number 1 [ 14.991477] [drm] nouveau 0000:00:05.0: nouveau_channel_alloc: initialised FIFO 1 [ 15.054617] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on lvds encoder (output 0) [ 15.054622] [drm] nouveau 0000:00:05.0: Calling LVDS script 6: [ 15.054627] [drm] nouveau 0000:00:05.0: 0xD3CD: Parsing digital output script table [ 15.194557] ppdev: user-space parallel port driver [ 15.361132] [drm] nouveau 0000:00:05.0: Output LVDS-1 is running on CRTC 0 using output A [ 15.361137] [drm] nouveau 0000:00:05.0: Calling LVDS script 2: [ 15.361140] [drm] nouveau 0000:00:05.0: 0xD447: Parsing digital output script table [ 15.532055] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on lvds encoder (output 0) [ 15.532060] [drm] nouveau 0000:00:05.0: Calling LVDS script 5: [ 15.532064] [drm] nouveau 0000:00:05.0: 0xD3B6: Parsing digital output script table [ 16.228075] [drm] nouveau 0000:00:05.0: Output LVDS-1 is running on CRTC 0 using output A [ 16.228293] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder (output 1) [ 16.248348] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on vga encoder (output 1) [ 16.248352] [drm] nouveau 0000:00:05.0: Output VGA-1 is running on CRTC 1 using output B [ 23.544021] eth0: no IPv6 routers present [ 87.240849] I-pipe: Domain RTAI registered. [ 87.240857] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03. [ 87.240859] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) . [ 87.240911] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 87.240913] PIPELINE layers: [ 87.240917] fa79fe20 9ac15d93 RTAI 200 [ 87.240919] c085cb20 0 Linux 100 [ 87.286070] RTAI[malloc]: global heap size = 2097152 bytes, . [ 87.293090] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: , kstacks pool size = 524288 bytes. [ 87.293098] RTAI[sched]: hard timer type/freq = APIC/12557115(Hz); default timing: periodic; linear timed lists. [ 87.293102] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 2209650000 hz. [ 87.293105] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [ 87.293211] RTAI[usi]: enabled. [ 87.388248] RTAI[math]: loaded. [ 97.922227] RTAI[math]: unloaded. [ 97.957346] SCHED releases registered named ALIEN RTGLBH [ 97.992717] RTAI[malloc]: unloaded. [ 98.088194] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 98.091086] I-pipe: Domain RTAI unregistered. [ 98.091179] RTAI[hal]: unmounted. [ 282.458436] eth0: link down. [37510.347360] I-pipe: Domain RTAI registered. [37510.347368] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03. [37510.347371] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) . [37510.347415] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [37510.347417] PIPELINE layers: [37510.347420] fe59ce20 9ac15d93 RTAI 200 [37510.347422] c085cb20 0 Linux 100 [37510.368856] RTAI[malloc]: global heap size = 2097152 bytes, . [37510.369286] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: , kstacks pool size = 524288 bytes. [37510.369293] RTAI[sched]: hard timer type/freq = APIC/12557115(Hz); default timing: periodic; linear timed lists. [37510.369296] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 2209650000 hz. [37510.369299] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [37510.369380] RTAI[usi]: enabled. [37510.415615] RTAI[math]: loaded. [37519.385563] RTAI[math]: unloaded. [37519.421143] SCHED releases registered named ALIEN RTGLBH [37519.453229] RTAI[malloc]: unloaded. [37519.563759] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [37519.567081] I-pipe: Domain RTAI unregistered. [37519.567169] RTAI[hal]: unmounted. [37682.038170] usb 1-1: new high speed USB device using ehci_hcd and address 3 [37682.196129] usb 1-1: configuration #1 chosen from 1 choice [37682.463422] Initializing USB Mass Storage driver... [37682.463566] scsi6 : SCSI emulation for USB Mass Storage devices [37682.463678] usbcore: registered new interface driver usb-storage [37682.463681] USB Mass Storage support registered. [37682.467991] usb-storage: device found at 3 [37682.467994] usb-storage: waiting for device to settle before scanning [37687.490577] usb-storage: device scan complete [37687.492982] scsi 6:0:0:0: Direct-Access SanDisk Cruzer Micro 2033 PQ: 0 ANSI: 0 [37687.498102] sd 6:0:0:0: Attached scsi generic sg3 type 0 [37687.500507] sd 6:0:0:0: [sdc] 1024000 512-byte logical blocks: (524 MB/500 MiB) [37687.503370] sd 6:0:0:0: [sdc] Write Protect is off [37687.503373] sd 6:0:0:0: [sdc] Mode Sense: 00 00 00 00 [37687.503376] sd 6:0:0:0: [sdc] Assuming drive cache: write through [37687.508379] sd 6:0:0:0: [sdc] Assuming drive cache: write through [37687.508386] sdc: sdc1 [37687.514390] sd 6:0:0:0: [sdc] Assuming drive cache: write through [37687.514396] sd 6:0:0:0: [sdc] Attached SCSI removable disk