[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-122-rtai (root@moses-6core) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #rtai SMP Tue Jul 27 12:44:07 CDT 2010 (Ubuntu 2.6.32-122.35.rtai-rtai 2.6.32.11+drm33.2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007bf00000 (usable) [ 0.000000] BIOS-e820: 000000007bf00000 - 000000007bf15000 (ACPI data) [ 0.000000] BIOS-e820: 000000007bf15000 - 000000007bf80000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007bf80000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x7bf00 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-E3FFF uncachable [ 0.000000] E4000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009dc00 (usable) [ 0.000000] modified: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d2000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007bf00000 (usable) [ 0.000000] modified: 000000007bf00000 - 000000007bf15000 (ACPI data) [ 0.000000] modified: 000000007bf15000 - 000000007bf80000 (ACPI NVS) [ 0.000000] modified: 000000007bf80000 - 0000000080000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 3736f000 - 37fefdc2 [ 0.000000] Allocated new RAMDISK: 008b5000 - 01535dc2 [ 0.000000] Move RAMDISK from 000000003736f000 - 0000000037fefdc1 to 008b5000 - 01535dc1 [ 0.000000] ACPI: RSDP 000f88f0 00014 (v00 HP ) [ 0.000000] ACPI: RSDT 7bf0bae3 00040 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 7bf14ad4 00074 (v01 HP MCP51M 06040000 PTL_ 000F4240) [ 0.000000] ACPI: DSDT 7bf0bb23 08FB1 (v01 HP MCP51M 06040000 MSFT 03000000) [ 0.000000] ACPI: FACS 7bf15fc0 00040 [ 0.000000] ACPI: SSDT 7bf14b48 00248 (v01 PTLTD POWERNOW 06040000 LTP 00000001) [ 0.000000] ACPI: MCFG 7bf14d90 0003C (v01 HP MCFG 06040000 LTP 00000000) [ 0.000000] ACPI: HPET 7bf14dcc 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001) [ 0.000000] ACPI: APIC 7bf14e04 0005E (v01 HP ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 7bf14e62 00028 (v01 HP $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SLIC 7bf14e8a 00176 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1095MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008b0db8] TEXT DATA BSS ==> [0000100000 - 00008b0db8] [ 0.000000] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000] [ 0.000000] #5 [00008b1000 - 00008b4128] BRK ==> [00008b1000 - 00008b4128] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008b5000 - 0001535dc2] NEW RAMDISK ==> [00008b5000 - 0001535dc2] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] found SMP MP-table at [c00f8920] f8920 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0007bf00 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x0007bf00 [ 0.000000] On node 0 totalpages: 507545 [ 0.000000] free_area_init_node: node 0, pgdat c07470e0, node_mem_map c1537000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3961 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2191 pages used for memmap [ 0.000000] HighMem zone: 278131 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 24 pages/cpu @c2800000 s74936 r0 d23368 u2097152 [ 0.000000] pcpu-alloc: s74936 r0 d23368 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 503578 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-122-rtai root=UUID=81e2ea89-21bd-43da-b756-43e9b88e4946 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 10152960 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0007bf00) [ 0.000000] Memory: 1981600k/2030592k available (4539k kernel code, 47528k reserved, 1928k data, 620k init, 1121288k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc0751000 - 0xc07ec000 ( 620 kB) [ 0.000000] .data : 0xc056ecbc - 0xc0750e68 (1928 kB) [ 0.000000] .text : 0xc0100000 - 0xc056ecbc (4539 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] I-pipe 2.6-03: pipeline enabled. [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2210.391 MHz processor. [ 0.008005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4420.78 BogoMIPS (lpj=8841564) [ 0.008024] Security Framework initialized [ 0.008045] AppArmor: AppArmor initialized [ 0.008053] Mount-cache hash table entries: 512 [ 0.008185] Initializing cgroup subsys ns [ 0.008189] Initializing cgroup subsys cpuacct [ 0.008193] Initializing cgroup subsys memory [ 0.008201] Initializing cgroup subsys devices [ 0.008203] Initializing cgroup subsys freezer [ 0.008206] Initializing cgroup subsys net_cls [ 0.008224] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.008226] CPU: L2 Cache: 512K (64 bytes/line) [ 0.008229] CPU: Physical Processor ID: 0 [ 0.008231] CPU: Processor Core ID: 0 [ 0.008234] mce: CPU supports 5 MCE banks [ 0.008246] using C1E aware idle routine [ 0.008254] Performance Events: AMD PMU driver. [ 0.008260] ... version: 0 [ 0.008262] ... bit width: 48 [ 0.008264] ... generic registers: 4 [ 0.008266] ... value mask: 0000ffffffffffff [ 0.008268] ... max period: 00007fffffffffff [ 0.008270] ... fixed-purpose events: 0 [ 0.008272] ... event mask: 000000000000000f [ 0.008276] Checking 'hlt' instruction... OK. [ 0.024690] ACPI: Core revision 20090903 [ 0.036010] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.036016] ftrace: allocating 21003 entries in 42 pages [ 0.044743] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.045281] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.048001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.048001] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.048001] ..... (found apic 0 pin 2) ... [ 0.088702] ....... works. [ 0.088704] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-64 stepping 02 [ 0.092001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.012000] Initializing CPU#1 [ 0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.012000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.012000] CPU: Physical Processor ID: 0 [ 0.012000] CPU: Processor Core ID: 1 [ 0.176089] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-64 stepping 02 [ 0.176114] Brought up 2 CPUs [ 0.176117] Total of 2 processors activated (8841.16 BogoMIPS). [ 0.176113] System has AMD C1E enabled [ 0.176113] Switch to broadcast mode on CPU1 [ 0.176316] CPU0 attaching sched-domain: [ 0.176319] domain 0: span 0-1 level MC [ 0.176321] groups: 0 1 [ 0.176327] CPU1 attaching sched-domain: [ 0.176329] domain 0: span 0-1 level MC [ 0.176332] groups: 1 0 [ 0.176417] Switch to broadcast mode on CPU0 [ 0.176417] devtmpfs: initialized [ 0.176417] regulator: core version 0.5 [ 0.176417] NET: Registered protocol family 16 [ 0.176417] Trying to unpack rootfs image as initramfs... [ 0.176417] EISA bus registered [ 0.176417] ACPI: bus type pci registered [ 0.176417] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 6 [ 0.176417] PCI: MCFG area at e0000000 reserved in E820 [ 0.176417] PCI: Using MMCONFIG for extended config space [ 0.176417] PCI: Using configuration type 1 for base access [ 0.180109] bio: create slab at 0 [ 0.180869] ACPI: EC: Look up EC in DSDT [ 0.183802] ACPI: BIOS _OSI(Linux) query ignored [ 0.184191] ACPI: Interpreter enabled [ 0.184193] ACPI: (supports S0 S5) [ 0.184203] ACPI: Using IOAPIC for interrupt routing [ 0.190866] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62 [ 0.191127] ACPI: No dock devices found. [ 0.191241] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.191503] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.191506] pci 0000:00:02.0: PME# disabled [ 0.191542] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.191545] pci 0000:00:03.0: PME# disabled [ 0.191565] pci 0000:00:05.0: reg 10 32bit mmio: [0xb2000000-0xb2ffffff] [ 0.191571] pci 0000:00:05.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff] [ 0.191576] pci 0000:00:05.0: reg 1c 64bit mmio: [0xb1000000-0xb1ffffff] [ 0.191582] pci 0000:00:05.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.191763] pci 0000:00:0a.0: reg 10 io port: [0x1d00-0x1d7f] [ 0.191822] pci 0000:00:0a.1: reg 20 io port: [0x3040-0x307f] [ 0.191828] pci 0000:00:0a.1: reg 24 io port: [0x3000-0x303f] [ 0.191852] pci 0000:00:0a.1: PME# supported from D3hot D3cold [ 0.191858] pci 0000:00:0a.1: PME# disabled [ 0.191890] pci 0000:00:0a.3: reg 10 32bit mmio: [0xb0040000-0xb007ffff] [ 0.191984] pci 0000:00:0b.0: reg 10 32bit mmio: [0xb0004000-0xb0004fff] [ 0.192027] pci 0000:00:0b.0: supports D1 D2 [ 0.192029] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.192034] pci 0000:00:0b.0: PME# disabled [ 0.192063] pci 0000:00:0b.1: reg 10 32bit mmio: [0xb0005000-0xb00050ff] [ 0.192097] pci 0000:00:0b.1: supports D1 D2 [ 0.192099] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.192103] pci 0000:00:0b.1: PME# disabled [ 0.192142] pci 0000:00:0d.0: reg 20 io port: [0x3080-0x308f] [ 0.192185] pci 0000:00:0e.0: reg 10 io port: [0x30c0-0x30c7] [ 0.192190] pci 0000:00:0e.0: reg 14 io port: [0x30b4-0x30b7] [ 0.192195] pci 0000:00:0e.0: reg 18 io port: [0x30b8-0x30bf] [ 0.192200] pci 0000:00:0e.0: reg 1c io port: [0x30b0-0x30b3] [ 0.192205] pci 0000:00:0e.0: reg 20 io port: [0x3090-0x309f] [ 0.192210] pci 0000:00:0e.0: reg 24 32bit mmio: [0xb0006000-0xb0006fff] [ 0.192260] pci 0000:00:0f.0: reg 10 io port: [0x30d8-0x30df] [ 0.192265] pci 0000:00:0f.0: reg 14 io port: [0x30cc-0x30cf] [ 0.192270] pci 0000:00:0f.0: reg 18 io port: [0x30d0-0x30d7] [ 0.192275] pci 0000:00:0f.0: reg 1c io port: [0x30c8-0x30cb] [ 0.192280] pci 0000:00:0f.0: reg 20 io port: [0x30a0-0x30af] [ 0.192285] pci 0000:00:0f.0: reg 24 32bit mmio: [0xb0007000-0xb0007fff] [ 0.192378] pci 0000:00:10.1: reg 10 32bit mmio: [0xb0000000-0xb0003fff] [ 0.192413] pci 0000:00:10.1: PME# supported from D3hot D3cold [ 0.192417] pci 0000:00:10.1: PME# disabled [ 0.192450] pci 0000:00:14.0: reg 10 32bit mmio: [0xb0008000-0xb0008fff] [ 0.192455] pci 0000:00:14.0: reg 14 io port: [0x30e0-0x30e7] [ 0.192478] pci 0000:00:14.0: supports D1 D2 [ 0.192480] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.192484] pci 0000:00:14.0: PME# disabled [ 0.192596] pci 0000:00:02.0: bridge io port: [0x4000-0x4fff] [ 0.192599] pci 0000:00:02.0: bridge 32bit mmio: [0xb4000000-0xb5ffffff] [ 0.192603] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xd01fffff] [ 0.192642] pci 0000:03:00.0: reg 10 64bit mmio: [0xb6000000-0xb6003fff] [ 0.192686] pci 0000:03:00.0: supports D1 D2 [ 0.192737] pci 0000:00:03.0: bridge 32bit mmio: [0xb6000000-0xb7ffffff] [ 0.192771] pci 0000:07:05.0: reg 10 32bit mmio: [0xb8000000-0xb80007ff] [ 0.192807] pci 0000:07:05.0: supports D1 D2 [ 0.192810] pci 0000:07:05.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.192813] pci 0000:07:05.0: PME# disabled [ 0.192840] pci 0000:07:05.1: reg 10 32bit mmio: [0xb8000800-0xb80008ff] [ 0.192876] pci 0000:07:05.1: supports D1 D2 [ 0.192879] pci 0000:07:05.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.192883] pci 0000:07:05.1: PME# disabled [ 0.192909] pci 0000:07:05.2: reg 10 32bit mmio: [0xb8000c00-0xb8000cff] [ 0.192946] pci 0000:07:05.2: supports D1 D2 [ 0.192948] pci 0000:07:05.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.192952] pci 0000:07:05.2: PME# disabled [ 0.192979] pci 0000:07:05.3: reg 10 32bit mmio: [0xb8001000-0xb80010ff] [ 0.193015] pci 0000:07:05.3: supports D1 D2 [ 0.193017] pci 0000:07:05.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.193021] pci 0000:07:05.3: PME# disabled [ 0.193048] pci 0000:07:05.4: reg 10 32bit mmio: [0xb8001400-0xb80014ff] [ 0.193084] pci 0000:07:05.4: supports D1 D2 [ 0.193086] pci 0000:07:05.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.193090] pci 0000:07:05.4: PME# disabled [ 0.193125] pci 0000:00:10.0: transparent bridge [ 0.193129] pci 0000:00:10.0: bridge 32bit mmio: [0xb8000000-0xb80fffff] [ 0.193139] pci_bus 0000:00: on NUMA node 0 [ 0.193143] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.193245] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] [ 0.193283] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] [ 0.193319] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] [ 0.230572] ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *0, disabled. [ 0.230754] ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *11 [ 0.230935] ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *11 [ 0.231113] ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled. [ 0.231293] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled. [ 0.231472] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled. [ 0.231655] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *11 [ 0.231834] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *0, disabled. [ 0.232021] ACPI: PCI Interrupt Link [LSMB] (IRQs *10) [ 0.232200] ACPI: PCI Interrupt Link [LPMU] (IRQs 11) *10 [ 0.232378] ACPI: PCI Interrupt Link [LUS0] (IRQs 22) *11 [ 0.232558] ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7 [ 0.232737] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *10 [ 0.232916] ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *0, disabled. [ 0.233096] ACPI: PCI Interrupt Link [LACI] (IRQs 21) *0, disabled. [ 0.233276] ACPI: PCI Interrupt Link [LMCI] (IRQs 21) *0, disabled. [ 0.233457] ACPI: PCI Interrupt Link [LPID] (IRQs 21) *0, disabled. [ 0.233645] ACPI: PCI Interrupt Link [LTID] (IRQs 23) *5 [ 0.233827] ACPI: PCI Interrupt Link [LSI1] (IRQs 20) *10 [ 0.233946] vgaarb: device added: PCI:0000:00:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.233958] vgaarb: loaded [ 0.234082] SCSI subsystem initialized [ 0.234194] libata version 3.00 loaded. [ 0.234268] usbcore: registered new interface driver usbfs [ 0.234281] usbcore: registered new interface driver hub [ 0.234305] usbcore: registered new device driver usb [ 0.234468] ACPI: WMI: Mapper loaded [ 0.234470] PCI: Using ACPI for IRQ routing [ 0.234655] NetLabel: Initializing [ 0.234657] NetLabel: domain hash size = 128 [ 0.234658] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.234673] NetLabel: unlabeled traffic allowed by default [ 0.236680] AppArmor: AppArmor Filesystem Enabled [ 0.236695] pnp: PnP ACPI init [ 0.236710] ACPI: bus type pnp registered [ 0.238399] pnp: PnP ACPI: found 13 devices [ 0.238402] ACPI: ACPI bus type pnp unregistered [ 0.238405] PnPBIOS: Disabled by ACPI PNP [ 0.238417] system 00:00: iomem range 0xe0000000-0xefffffff has been reserved [ 0.238423] system 00:01: iomem range 0xffc00000-0xffffffff could not be reserved [ 0.238427] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.238430] system 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved [ 0.238434] system 00:01: iomem range 0xfed00000-0xfed00fff has been reserved [ 0.238439] system 00:03: iomem range 0xe0000000-0xefffffff has been reserved [ 0.238445] system 00:04: ioport range 0x1000-0x107f has been reserved [ 0.238448] system 00:04: ioport range 0x1080-0x10ff has been reserved [ 0.238451] system 00:04: ioport range 0x1400-0x147f has been reserved [ 0.238454] system 00:04: ioport range 0x1480-0x14ff has been reserved [ 0.238457] system 00:04: ioport range 0x1800-0x187f has been reserved [ 0.238460] system 00:04: ioport range 0x1880-0x18ff has been reserved [ 0.238463] system 00:04: ioport range 0x2000-0x203f has been reserved [ 0.238469] system 00:05: ioport range 0x360-0x361 has been reserved [ 0.238472] system 00:05: ioport range 0x380-0x383 has been reserved [ 0.238475] system 00:05: ioport range 0x4d0-0x4d1 has been reserved [ 0.274254] Switching to clocksource acpi_pm [ 0.274607] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 [ 0.274607] pci 0000:00:02.0: IO window: 0x4000-0x4fff [ 0.274607] pci 0000:00:02.0: MEM window: 0xb4000000-0xb5ffffff [ 0.274607] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000d01fffff [ 0.274607] pci 0000:00:03.0: PCI bridge, secondary bus 0000:03 [ 0.274607] pci 0000:00:03.0: IO window: disabled [ 0.274607] pci 0000:00:03.0: MEM window: 0xb6000000-0xb7ffffff [ 0.274607] pci 0000:00:03.0: PREFETCH window: disabled [ 0.274607] pci 0000:00:10.0: PCI bridge, secondary bus 0000:07 [ 0.274607] pci 0000:00:10.0: IO window: disabled [ 0.274607] pci 0000:00:10.0: MEM window: 0xb8000000-0xb80fffff [ 0.274607] pci 0000:00:10.0: PREFETCH window: disabled [ 0.274607] pci 0000:00:02.0: setting latency timer to 64 [ 0.274607] pci 0000:00:03.0: setting latency timer to 64 [ 0.274607] pci 0000:00:10.0: setting latency timer to 64 [ 0.274607] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.274607] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.274607] pci_bus 0000:01: resource 0 io: [0x4000-0x4fff] [ 0.274607] pci_bus 0000:01: resource 1 mem: [0xb4000000-0xb5ffffff] [ 0.274607] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xd01fffff] [ 0.274607] pci_bus 0000:03: resource 1 mem: [0xb6000000-0xb7ffffff] [ 0.274607] pci_bus 0000:07: resource 1 mem: [0xb8000000-0xb80fffff] [ 0.274607] pci_bus 0000:07: resource 3 io: [0x00-0xffff] [ 0.274607] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffff] [ 0.274607] NET: Registered protocol family 2 [ 0.274607] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.274607] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.274607] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.274607] TCP: Hash tables configured (established 131072 bind 65536) [ 0.274607] TCP reno registered [ 0.274607] NET: Registered protocol family 1 [ 0.274607] pci 0000:00:00.0: Found disabled HT MSI Mapping [ 0.274607] pci 0000:00:00.0: Enabling HT MSI Mapping [ 0.274607] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.274607] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.274607] pci 0000:00:05.0: Boot video device [ 0.476551] pci 0000:00:09.0: Found enabled HT MSI Mapping [ 0.476609] pci 0000:00:09.0: Found enabled HT MSI Mapping [ 0.476669] pci 0000:00:09.0: Found enabled HT MSI Mapping [ 0.476731] pci 0000:00:09.0: Found enabled HT MSI Mapping [ 0.476780] Simple Boot Flag at 0x36 set to 0x1 [ 0.476999] Scanning for low memory corruption every 60 seconds [ 0.477110] audit: initializing netlink socket (disabled) [ 0.477121] type=2000 audit(1399962978.476:1): initialized [ 0.485101] highmem bounce pool size: 64 pages [ 0.485106] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.486632] VFS: Disk quotas dquot_6.5.2 [ 0.486689] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.487247] fuse init (API version 7.13) [ 0.487334] msgmni has been set to 1682 [ 0.487560] alg: No test for stdrng (krng) [ 0.487614] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.487617] io scheduler noop registered [ 0.487619] io scheduler anticipatory registered [ 0.487621] io scheduler deadline registered [ 0.487659] io scheduler cfq registered (default) [ 0.487818] alloc irq_desc for 24 on node -1 [ 0.487820] alloc kstat_irqs on node -1 [ 0.487830] pcieport 0000:00:02.0: irq 24 for MSI/MSI-X [ 0.487836] pcieport 0000:00:02.0: setting latency timer to 64 [ 0.487905] alloc irq_desc for 25 on node -1 [ 0.487907] alloc kstat_irqs on node -1 [ 0.487912] pcieport 0000:00:03.0: irq 25 for MSI/MSI-X [ 0.487916] pcieport 0000:00:03.0: setting latency timer to 64 [ 0.487969] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.487994] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.488095] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.488100] ACPI: Power Button [PWRB] [ 0.488151] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.488153] ACPI: Sleep Button [SLPB] [ 0.488204] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 0.488530] ACPI: Lid Switch [LID] [ 0.488606] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.488609] ACPI: Power Button [PWRF] [ 0.490039] hpet_acpi_add: no address or irqs in _CRS [ 0.490108] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.491449] brd: module loaded [ 0.491951] loop: module loaded [ 0.492087] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 0.492282] pata_acpi 0000:00:0d.0: setting latency timer to 64 [ 0.492307] pata_acpi 0000:00:0e.0: enabling device (0005 -> 0007) [ 0.492687] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 23 [ 0.492692] alloc irq_desc for 23 on node -1 [ 0.492694] alloc kstat_irqs on node -1 [ 0.492706] pata_acpi 0000:00:0e.0: PCI INT A -> Link[LTID] -> GSI 23 (level, high) -> IRQ 23 [ 0.492724] pata_acpi 0000:00:0e.0: setting latency timer to 64 [ 0.492732] pata_acpi 0000:00:0e.0: PCI INT A disabled [ 0.493069] ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 20 [ 0.493072] alloc irq_desc for 20 on node -1 [ 0.493074] alloc kstat_irqs on node -1 [ 0.493082] pata_acpi 0000:00:0f.0: PCI INT A -> Link[LSI1] -> GSI 20 (level, high) -> IRQ 20 [ 0.493098] pata_acpi 0000:00:0f.0: setting latency timer to 64 [ 0.493106] pata_acpi 0000:00:0f.0: PCI INT A disabled [ 0.493433] Fixed MDIO Bus: probed [ 0.493469] PPP generic driver version 2.4.2 [ 0.493505] tun: Universal TUN/TAP device driver, 1.6 [ 0.493507] tun: (C) 1999-2004 Max Krasnyansky [ 0.493591] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.493927] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22 [ 0.493930] alloc irq_desc for 22 on node -1 [ 0.493932] alloc kstat_irqs on node -1 [ 0.493940] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, high) -> IRQ 22 [ 0.493959] ehci_hcd 0000:00:0b.1: setting latency timer to 64 [ 0.493962] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 0.493997] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 [ 0.494024] ehci_hcd 0000:00:0b.1: debug port 1 [ 0.494033] ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported [ 0.494058] ehci_hcd 0000:00:0b.1: irq 22, io mem 0xb0005000 [ 0.494112] isapnp: Scanning for PnP cards... [ 0.543009] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00 [ 0.543106] usb usb1: configuration #1 chosen from 1 choice [ 0.543136] hub 1-0:1.0: USB hub found [ 0.543146] hub 1-0:1.0: 8 ports detected [ 0.543212] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.543562] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22 [ 0.543566] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LUS0] -> GSI 22 (level, high) -> IRQ 22 [ 0.543575] ohci_hcd 0000:00:0b.0: setting latency timer to 64 [ 0.543579] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 0.543611] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 [ 0.543628] ohci_hcd 0000:00:0b.0: irq 22, io mem 0xb0004000 [ 0.607463] usb usb2: configuration #1 chosen from 1 choice [ 0.607494] hub 2-0:1.0: USB hub found [ 0.607507] hub 2-0:1.0: 8 ports detected [ 0.607581] uhci_hcd: USB Universal Host Controller Interface driver [ 0.607666] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 0.627822] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.627836] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.627948] mice: PS/2 mouse device common for all mice [ 0.628094] rtc_cmos 00:09: RTC can wake from S4 [ 0.628132] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0 [ 0.628165] rtc0: alarms up to one year, y3k, 114 bytes nvram [ 0.628268] device-mapper: uevent: version 1.0.3 [ 0.641405] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.685358] device-mapper: multipath: version 1.1.0 loaded [ 0.685363] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.693156] EISA: Probing bus 0 at eisa.0 [ 0.693164] Cannot allocate resource for EISA slot 1 [ 0.693167] Cannot allocate resource for EISA slot 2 [ 0.693169] Cannot allocate resource for EISA slot 3 [ 0.693171] Cannot allocate resource for EISA slot 4 [ 0.693185] EISA: Detected 0 cards. [ 0.693187] cpuidle: using governor ladder [ 0.693190] cpuidle: using governor menu [ 0.693591] TCP cubic registered [ 0.693733] NET: Registered protocol family 10 [ 0.694135] lo: Disabled Privacy Extensions [ 0.694427] NET: Registered protocol family 17 [ 0.694455] Using IPI No-Shortcut mode [ 0.694552] registered taskstats version 1 [ 0.694991] rtc_cmos 00:09: setting system clock to 2014-05-13 06:36:19 UTC (1399962979) [ 0.694994] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.694996] EDD information not available. [ 0.711034] Freeing initrd memory: 12803k freed [ 0.726347] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 0.847817] isapnp: No Plug & Play device found [ 0.847847] Freeing unused kernel memory: 620k freed [ 0.848338] Write protecting the kernel text: 4540k [ 0.848371] Write protecting the kernel read-only data: 1668k [ 0.870046] udev: starting version 151 [ 0.913053] usb 1-4: new high speed USB device using ehci_hcd and address 2 [ 0.989800] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19 [ 0.989807] alloc irq_desc for 19 on node -1 [ 0.989810] alloc kstat_irqs on node -1 [ 0.989823] b43-pci-bridge 0000:03:00.0: PCI INT A -> Link[LK4E] -> GSI 19 (level, high) -> IRQ 19 [ 0.989832] b43-pci-bridge 0000:03:00.0: setting latency timer to 64 [ 0.994305] pata_amd 0000:00:0d.0: version 0.4.1 [ 0.994352] pata_amd 0000:00:0d.0: setting latency timer to 64 [ 1.006062] scsi0 : pata_amd [ 1.010224] Linux agpgart interface v0.103 [ 1.022478] scsi1 : pata_amd [ 1.023302] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3080 irq 14 [ 1.023305] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3088 irq 15 [ 1.023368] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.023692] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 [ 1.023698] forcedeth 0000:00:14.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, high) -> IRQ 20 [ 1.023703] forcedeth 0000:00:14.0: setting latency timer to 64 [ 1.023763] nv_probe: set workaround bit for reversed mac addr [ 1.053082] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0 [ 1.053539] [drm] Initialized drm 1.1.0 20060810 [ 1.056578] usb 1-4: configuration #1 chosen from 1 choice [ 1.058794] acpi device:22: registered as cooling_device0 [ 1.059033] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input6 [ 1.059089] ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no) [ 1.184364] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NC08, max MWDMA2 [ 1.184390] ata1: nv_mode_filter: 0x39f&0x739f->0x39f, BIOS=0x0 (0xc600) ACPI=0x39f (120:600:0x12) [ 1.200315] ata1.00: configured for MWDMA2 [ 1.205711] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NC08 PQ: 0 ANSI: 5 [ 1.216733] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.216737] Uniform CD-ROM driver Revision: 3.20 [ 1.216864] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.216936] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.217027] ata2: port disabled. ignoring. [ 1.239629] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5 [ 1.239648] ohci1394 0000:07:05.0: PCI INT A -> Link[LNK1] -> GSI 5 (level, high) -> IRQ 5 [ 1.294085] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[b8000000-b80007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 1.545097] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1b:24:06:0c:44 [ 1.545101] forcedeth 0000:00:14.0: highdma pwrctl lnktim desc-v3 [ 1.545134] sata_nv 0000:00:0e.0: version 3.5 [ 1.545152] sata_nv 0000:00:0e.0: PCI INT A -> Link[LTID] -> GSI 23 (level, high) -> IRQ 23 [ 1.545155] sata_nv 0000:00:0e.0: Using SWNCQ mode [ 1.545230] sata_nv 0000:00:0e.0: setting latency timer to 64 [ 1.545417] scsi2 : sata_nv [ 1.545493] scsi3 : sata_nv [ 1.545703] ata3: SATA max UDMA/133 cmd 0x30c0 ctl 0x30b4 bmdma 0x3090 irq 23 [ 1.545707] ata4: SATA max UDMA/133 cmd 0x30b8 ctl 0x30b0 bmdma 0x3098 irq 23 [ 1.545777] nouveau 0000:00:05.0: power state changed by ACPI to D0 [ 1.546099] ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 18 [ 1.546105] alloc irq_desc for 18 on node -1 [ 1.546108] alloc kstat_irqs on node -1 [ 1.546120] nouveau 0000:00:05.0: PCI INT A -> Link[LK3E] -> GSI 18 (level, high) -> IRQ 18 [ 1.546125] nouveau 0000:00:05.0: setting latency timer to 64 [ 1.548153] [drm] nouveau 0000:00:05.0: failed to evaluate _DSM: 5 [ 1.548531] [drm] nouveau 0000:00:05.0: Detected an NV40 generation card (0x04e000a2) [ 1.548998] [drm] nouveau 0000:00:05.0: Attempting to load BIOS image from PROM [ 1.549002] [drm] nouveau 0000:00:05.0: ... BIOS signature not found [ 1.549004] [drm] nouveau 0000:00:05.0: Attempting to load BIOS image from PRAMIN [ 1.587857] [drm] nouveau 0000:00:05.0: ... appears to be valid [ 1.587861] [drm] nouveau 0000:00:05.0: BIT BIOS found [ 1.587864] [drm] nouveau 0000:00:05.0: Bios version 05.51.28.53 [ 1.587867] [drm] nouveau 0000:00:05.0: TMDS table script pointers not stubbed [ 1.587869] [drm] nouveau 0000:00:05.0: BIT table 'd' not found [ 1.587872] [drm] nouveau 0000:00:05.0: Found Display Configuration Block version 3.0 [ 1.587876] [drm] nouveau 0000:00:05.0: DCB connector table: VHER 0x30 5 10 2 [ 1.587879] [drm] nouveau 0000:00:05.0: 0: 0x00000000: type 0x00 idx 0 tag 0xff [ 1.587882] [drm] nouveau 0000:00:05.0: 1: 0x00000131: type 0x31 idx 1 tag 0xff [ 1.587885] [drm] nouveau 0000:00:05.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff [ 1.587888] [drm] nouveau 0000:00:05.0: 3: 0x00000211: type 0x11 idx 2 tag 0xff [ 1.587891] [drm] nouveau 0000:00:05.0: 4: 0x00000213: type 0x13 idx 2 tag 0xff [ 1.587894] [drm] nouveau 0000:00:05.0: 5: 0x00000340: type 0x40 idx 3 tag 0xff [ 1.587898] [drm] nouveau 0000:00:05.0: Raw DCB entry 0: 03005313 00000004 [ 1.587901] [drm] nouveau 0000:00:05.0: Raw DCB entry 1: 02010300 00000023 [ 1.587904] [drm] nouveau 0000:00:05.0: Raw DCB entry 2: 024123f1 0040c080 [ 1.587910] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 0 at offset 0xE225 [ 1.587970] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 1 at offset 0xE364 [ 1.587972] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 2 at offset 0xE365 [ 1.588139] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 3 at offset 0xE4E7 [ 1.588142] [drm] nouveau 0000:00:05.0: === C51 misaligned reg 0x00001305 not verified === [ 1.588144] [drm] nouveau 0000:00:05.0: === C51 misaligned reg 0x00001401 not verified === [ 1.588147] [drm] nouveau 0000:00:05.0: === C51 misaligned reg 0x00001405 not verified === [ 1.588150] [drm] nouveau 0000:00:05.0: === C51 misaligned reg 0x00001409 not verified === [ 1.588152] [drm] nouveau 0000:00:05.0: === C51 misaligned reg 0x0000140D not verified === [ 1.588161] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 4 at offset 0xE533 [ 1.604924] [TTM] Zone kernel: Available graphics memory: 437392 kiB. [ 1.604927] [TTM] Zone highmem: Available graphics memory: 998036 kiB. [ 1.604938] [drm] nouveau 0000:00:05.0: 64 MiB VRAM [ 1.607192] [drm] nouveau 0000:00:05.0: 64 MiB GART (aperture) [ 1.607592] [drm] nouveau 0000:00:05.0: Allocating FIFO number 0 [ 1.608185] [drm] nouveau 0000:00:05.0: nouveau_channel_alloc: initialised FIFO 0 [ 1.608192] [drm] nouveau 0000:00:05.0: Initial CRTC_OWNER is 0 [ 1.608197] [drm] nouveau 0000:00:05.0: Saving VGA fonts [ 1.644393] [drm] nouveau 0000:00:05.0: Detected a LVDS connector [ 1.753634] [drm] nouveau 0000:00:05.0: Detected a VGA connector [ 1.753664] [drm] nouveau 0000:00:05.0: Detected a TV connector [ 1.754557] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on lvds encoder (output 0) [ 1.754561] [drm] nouveau 0000:00:05.0: Calling LVDS script 6: [ 1.754565] [drm] nouveau 0000:00:05.0: 0xD3CD: Parsing digital output script table [ 2.012101] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.020257] ata3.00: ATA-7: FUJITSU MHW2120BH, 8918, max UDMA/100 [ 2.020260] ata3.00: 234441648 sectors, multi 16: LBA48 [ 2.036268] ata3.00: configured for UDMA/100 [ 2.036403] scsi 2:0:0:0: Direct-Access ATA FUJITSU MHW2120B 8918 PQ: 0 ANSI: 5 [ 2.036588] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 2.036706] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 2.036750] sd 2:0:0:0: [sda] Write Protect is off [ 2.036753] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.036774] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.036922] sda: sda1 sda2 < sda5 > [ 2.037920] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.040079] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder (output 1) [ 2.040083] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on TV encoder (output 2) [ 2.200283] [drm] nouveau 0000:00:05.0: allocated 1440x1024 fb: 0x49000, bo f6900800 [ 2.200349] fb0: nouveaufb frame buffer device [ 2.200351] registered panic notifier [ 2.200357] [drm] Initialized nouveau 0.0.15 20090420 for 0000:00:05.0 on minor 0 [ 2.200397] sata_nv 0000:00:0f.0: PCI INT A -> Link[LSI1] -> GSI 20 (level, high) -> IRQ 20 [ 2.200401] sata_nv 0000:00:0f.0: Using SWNCQ mode [ 2.200463] sata_nv 0000:00:0f.0: setting latency timer to 64 [ 2.200645] scsi4 : sata_nv [ 2.200856] scsi5 : sata_nv [ 2.201092] ata5: SATA max UDMA/133 cmd 0x30d8 ctl 0x30cc bmdma 0x30a0 irq 20 [ 2.201095] ata6: SATA max UDMA/133 cmd 0x30d0 ctl 0x30c8 bmdma 0x30a8 irq 20 [ 2.358949] ata4: SATA link down (SStatus 0 SControl 300) [ 2.568497] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b0009e40400] [ 3.228121] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.236363] ata5.00: ATA-7: FUJITSU MHW2120BH, 8918, max UDMA/100 [ 3.236366] ata5.00: 234441648 sectors, multi 16: LBA48 [ 3.252363] ata5.00: configured for UDMA/100 [ 3.252485] scsi 4:0:0:0: Direct-Access ATA FUJITSU MHW2120B 8918 PQ: 0 ANSI: 5 [ 3.252655] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 3.252733] sd 4:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 3.252778] sd 4:0:0:0: [sdb] Write Protect is off [ 3.252781] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.252805] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.253360] sdb: sdb1 sdb2 < [ 3.574973] ata6: SATA link down (SStatus 0 SControl 300) [ 3.613319] sdb5 sdb6 > [ 3.634021] sd 4:0:0:0: [sdb] Attached SCSI disk [ 3.636250] vga16fb: initializing [ 3.636256] vga16fb: mapped to 0xc00a0000 [ 3.636263] vga16fb: not registering due to another framebuffer present [ 3.656359] [drm] nouveau 0000:00:05.0: Output LVDS-1 is running on CRTC 0 using output A [ 3.656362] [drm] nouveau 0000:00:05.0: Calling LVDS script 2: [ 3.656366] [drm] nouveau 0000:00:05.0: 0xD447: Parsing digital output script table [ 3.832048] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on lvds encoder (output 0) [ 3.832053] [drm] nouveau 0000:00:05.0: Calling LVDS script 5: [ 3.832056] [drm] nouveau 0000:00:05.0: 0xD3B6: Parsing digital output script table [ 3.880078] [drm] nouveau 0000:00:05.0: Output LVDS-1 is running on CRTC 0 using output A [ 3.890353] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on vga encoder (output 1) [ 3.890357] [drm] nouveau 0000:00:05.0: Output VGA-1 is running on CRTC 1 using output B [ 3.894057] Console: switching to colour frame buffer device 160x56 [ 4.195742] xor: automatically using best checksumming function: pIII_sse [ 4.213014] pIII_sse : 6768.000 MB/sec [ 4.213017] xor: using function: pIII_sse (6768.000 MB/sec) [ 4.215734] device-mapper: dm-raid45: initialized v0.2594b [ 4.430907] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 14.475231] udev: starting version 151 [ 14.515931] Adding 4805624k swap on /dev/sda5. Priority:-1 extents:1 across:4805624k [ 14.528066] lp: driver loaded but no devices found [ 14.598419] i2c i2c-2: nForce2 SMBus adapter at 0x3040 [ 14.598442] i2c i2c-3: nForce2 SMBus adapter at 0x3000 [ 14.818959] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 14.823817] sdhci: Secure Digital Host Controller Interface driver [ 14.823821] sdhci: Copyright(c) Pierre Ossman [ 14.825570] sdhci-pci 0000:07:05.1: SDHCI controller found [1180:0822] (rev 19) [ 14.825950] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7 [ 14.825965] sdhci-pci 0000:07:05.1: PCI INT B -> Link[LNK2] -> GSI 7 (level, high) -> IRQ 7 [ 14.828721] Registered led device: mmc0:: [ 14.829716] ricoh-mmc: Ricoh MMC Controller disabling driver [ 14.829720] ricoh-mmc: Copyright(c) Philip Langdale [ 14.829754] mmc0: SDHCI controller on PCI [0000:07:05.1] using PIO [ 14.829792] ricoh-mmc: Ricoh MMC controller found at 0000:07:05.2 [1180:0843] (rev 1) [ 14.829809] ricoh-mmc: Controller is now disabled. [ 14.830113] Linux video capture interface: v2.00 [ 14.834154] cfg80211: Calling CRDA to update world regulatory domain [ 14.835529] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0) [ 14.852881] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:0b.1/usb1/1-4/1-4:1.0/input/input7 [ 14.852940] usbcore: registered new interface driver uvcvideo [ 14.852943] USB Video Class driver (v0.1.0) [ 14.864761] b43-phy0: Broadcom 4311 WLAN found (core revision 13) [ 15.022784] phy0: Selected rate control algorithm 'minstrel' [ 15.023610] Registered led device: b43-phy0::tx [ 15.023627] Registered led device: b43-phy0::rx [ 15.023643] Registered led device: b43-phy0::radio [ 15.023720] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ] [ 15.062854] cfg80211: World regulatory domain updated: [ 15.062859] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 15.062862] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.062865] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.062868] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.062871] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.062874] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.063283] type=1505 audit(1399980993.865:2): operation="profile_load" pid=814 name="/sbin/dhclient3" [ 15.063550] type=1505 audit(1399980993.865:3): operation="profile_load" pid=814 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 15.063696] type=1505 audit(1399980993.865:4): operation="profile_load" pid=814 name="/usr/lib/connman/scripts/dhclient-script" [ 15.127805] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 [ 15.127812] alloc irq_desc for 21 on node -1 [ 15.127815] alloc kstat_irqs on node -1 [ 15.127828] HDA Intel 0000:00:10.1: PCI INT B -> Link[LAZA] -> GSI 21 (level, high) -> IRQ 21 [ 15.127832] hda_intel: Disable MSI for Nvidia chipset [ 15.127884] HDA Intel 0000:00:10.1: setting latency timer to 64 [ 15.281558] type=1505 audit(1399980994.085:5): operation="profile_load" pid=970 name="/usr/share/gdm/guest-session/Xsession" [ 15.283332] type=1505 audit(1399980994.085:6): operation="profile_replace" pid=971 name="/sbin/dhclient3" [ 15.283609] type=1505 audit(1399980994.085:7): operation="profile_replace" pid=971 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 15.283764] type=1505 audit(1399980994.085:8): operation="profile_replace" pid=971 name="/usr/lib/connman/scripts/dhclient-script" [ 15.287887] type=1505 audit(1399980994.089:9): operation="profile_load" pid=972 name="/usr/bin/evince" [ 15.291448] type=1505 audit(1399980994.093:10): operation="profile_load" pid=972 name="/usr/bin/evince-previewer" [ 15.293687] type=1505 audit(1399980994.097:11): operation="profile_load" pid=972 name="/usr/bin/evince-thumbnailer" [ 15.452075] b43 ssb0:0: firmware: requesting b43/ucode13.fw [ 15.472451] b43 ssb0:0: firmware: requesting b43-open/ucode13.fw [ 15.475153] b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found [ 15.475160] b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found [ 15.475164] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. [ 15.477574] eth0: no link during initialization. [ 15.478045] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.524552] b43 ssb0:0: firmware: requesting b43/ucode13.fw [ 15.529949] b43 ssb0:0: firmware: requesting b43-open/ucode13.fw [ 15.536535] b43-phy0 ERROR: Firmware file "b43/ucode13.fw" not found [ 15.536542] b43-phy0 ERROR: Firmware file "b43-open/ucode13.fw" not found [ 15.536545] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. [ 15.663923] ppdev: user-space parallel port driver [ 15.684028] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000 [ 15.749345] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 [ 16.549712] [drm] nouveau 0000:00:05.0: Allocating FIFO number 1 [ 16.550272] [drm] nouveau 0000:00:05.0: nouveau_channel_alloc: initialised FIFO 1 [ 16.565810] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on lvds encoder (output 0) [ 16.565815] [drm] nouveau 0000:00:05.0: Calling LVDS script 6: [ 16.565820] [drm] nouveau 0000:00:05.0: 0xD3CD: Parsing digital output script table [ 16.872146] [drm] nouveau 0000:00:05.0: Output LVDS-1 is running on CRTC 0 using output A [ 16.872149] [drm] nouveau 0000:00:05.0: Calling LVDS script 2: [ 16.872152] [drm] nouveau 0000:00:05.0: 0xD447: Parsing digital output script table [ 17.044074] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on lvds encoder (output 0) [ 17.044077] [drm] nouveau 0000:00:05.0: Calling LVDS script 5: [ 17.044080] [drm] nouveau 0000:00:05.0: 0xD3B6: Parsing digital output script table [ 17.740071] [drm] nouveau 0000:00:05.0: Output LVDS-1 is running on CRTC 0 using output A [ 17.740293] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder (output 1) [ 17.760354] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on vga encoder (output 1) [ 17.760358] [drm] nouveau 0000:00:05.0: Output VGA-1 is running on CRTC 1 using output B [ 76.177164] eth0: link up. [ 76.177643] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 86.636044] eth0: no IPv6 routers present [ 1168.260063] usb 1-2: new high speed USB device using ehci_hcd and address 3 [ 1168.399819] usb 1-2: configuration #1 chosen from 1 choice [ 1168.659465] Initializing USB Mass Storage driver... [ 1168.659617] scsi6 : SCSI emulation for USB Mass Storage devices [ 1168.659904] usbcore: registered new interface driver usb-storage [ 1168.659908] USB Mass Storage support registered. [ 1168.664049] usb-storage: device found at 3 [ 1168.664052] usb-storage: waiting for device to settle before scanning [ 1173.664927] usb-storage: device scan complete [ 1173.666356] scsi 6:0:0:0: Direct-Access SanDisk Cruzer Micro 2033 PQ: 0 ANSI: 0 [ 1173.671467] sd 6:0:0:0: [sdc] 1024000 512-byte logical blocks: (524 MB/500 MiB) [ 1173.671731] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 1173.675219] sd 6:0:0:0: [sdc] Write Protect is off [ 1173.675225] sd 6:0:0:0: [sdc] Mode Sense: 00 00 00 00 [ 1173.675228] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 1173.680198] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 1173.680204] sdc: sdc1 [ 1173.685213] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 1173.685220] sd 6:0:0:0: [sdc] Attached SCSI removable disk [ 5919.727643] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on lvds encoder (output 0) [ 5919.727648] [drm] nouveau 0000:00:05.0: Calling LVDS script 6: [ 5919.727653] [drm] nouveau 0000:00:05.0: 0xD3CD: Parsing digital output script table [ 5920.022038] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder (output 1) [11844.566347] usb 1-2: USB disconnect, address 3 [17023.187106] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on lvds encoder (output 0) [17023.187111] [drm] nouveau 0000:00:05.0: Calling LVDS script 2: [17023.187116] [drm] nouveau 0000:00:05.0: 0xD447: Parsing digital output script table [17023.356078] [drm] nouveau 0000:00:05.0: Calling LVDS script 5: [17023.356083] [drm] nouveau 0000:00:05.0: 0xD3B6: Parsing digital output script table [17023.414072] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on vga encoder (output 1) [17151.647841] I-pipe: Domain RTAI registered. [17151.647849] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03. [17151.647851] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) . [17151.647897] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [17151.647899] PIPELINE layers: [17151.647902] fded4e20 9ac15d93 RTAI 200 [17151.647905] c085cb20 0 Linux 100 [17151.681488] RTAI[malloc]: global heap size = 2097152 bytes, . [17151.681877] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: , kstacks pool size = 524288 bytes. [17151.681881] RTAI[sched]: hard timer type/freq = APIC/12557115(Hz); default timing: periodic; linear timed lists. [17151.681885] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 2210391000 hz. [17151.681887] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [17151.681994] RTAI[usi]: enabled. [17151.730154] RTAI[math]: loaded. [17160.586078] RTAI[math]: unloaded. [17160.621878] SCHED releases registered named ALIEN RTGLBH [17160.656464] RTAI[malloc]: unloaded. [17160.758988] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [17160.761942] I-pipe: Domain RTAI unregistered. [17160.762030] RTAI[hal]: unmounted. [17466.885463] usb 1-1: new high speed USB device using ehci_hcd and address 4 [17467.050438] usb 1-1: configuration #1 chosen from 1 choice [17467.217199] scsi7 : SCSI emulation for USB Mass Storage devices [17467.218336] usb-storage: device found at 4 [17467.218340] usb-storage: waiting for device to settle before scanning [17472.218267] usb-storage: device scan complete [17472.219978] scsi 7:0:0:0: Direct-Access SanDisk Cruzer Micro 2033 PQ: 0 ANSI: 0 [17472.220881] sd 7:0:0:0: Attached scsi generic sg3 type 0 [17472.224523] sd 7:0:0:0: [sdc] 1024000 512-byte logical blocks: (524 MB/500 MiB) [17472.227851] sd 7:0:0:0: [sdc] Write Protect is off [17472.227857] sd 7:0:0:0: [sdc] Mode Sense: 00 00 00 00 [17472.227860] sd 7:0:0:0: [sdc] Assuming drive cache: write through [17472.232834] sd 7:0:0:0: [sdc] Assuming drive cache: write through [17472.232840] sdc: sdc1 [17472.237835] sd 7:0:0:0: [sdc] Assuming drive cache: write through [17472.237842] sd 7:0:0:0: [sdc] Attached SCSI removable disk [17527.069886] usb 1-1: USB disconnect, address 4 [17940.055371] I-pipe: Domain RTAI registered. [17940.055378] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03. [17940.055380] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) . [17940.055426] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [17940.055429] PIPELINE layers: [17940.055432] fb6fce20 9ac15d93 RTAI 200 [17940.055434] c085cb20 0 Linux 100 [17940.076688] RTAI[malloc]: global heap size = 2097152 bytes, . [17940.076960] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: , kstacks pool size = 524288 bytes. [17940.076966] RTAI[sched]: hard timer type/freq = APIC/12557115(Hz); default timing: periodic; linear timed lists. [17940.076970] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 2210391000 hz. [17940.076973] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [17940.077058] RTAI[usi]: enabled. [17940.123775] RTAI[math]: loaded. [17940.217113] GANTRYKINS: joints[0] = 0 [17940.217118] GANTRYKINS: joints[1] = 1 [17940.217121] GANTRYKINS: joints[2] = 2 [17940.217124] GANTRYKINS: joints[3] = 1 [17940.217126] GANTRYKINS: joints[4] = -1 [17940.217129] GANTRYKINS: joints[5] = -1 [17940.217132] GANTRYKINS: joints[6] = -1 [17940.217135] GANTRYKINS: joints[7] = -1 [17940.217138] GANTRYKINS: joints[8] = -1 [17947.249328] RTAI[math]: unloaded. [17947.284598] SCHED releases registered named ALIEN RTGLBH [17947.316582] RTAI[malloc]: unloaded. [17947.435772] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [17947.438736] I-pipe: Domain RTAI unregistered. [17947.438824] RTAI[hal]: unmounted. [18078.982071] I-pipe: Domain RTAI registered. [18078.982079] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03. [18078.982081] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) . [18078.982125] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [18078.982127] PIPELINE layers: [18078.982130] fc1d4e20 9ac15d93 RTAI 200 [18078.982132] c085cb20 0 Linux 100 [18079.004046] RTAI[malloc]: global heap size = 2097152 bytes, . [18079.004286] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: , kstacks pool size = 524288 bytes. [18079.004292] RTAI[sched]: hard timer type/freq = APIC/12557115(Hz); default timing: periodic; linear timed lists. [18079.004296] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 2210391000 hz. [18079.004299] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [18079.004383] RTAI[usi]: enabled. [18079.051297] RTAI[math]: loaded. [18079.097575] GANTRYKINS: joints[0] = 0 [18079.097580] GANTRYKINS: joints[1] = 1 [18079.097583] GANTRYKINS: joints[2] = 2 [18079.097586] GANTRYKINS: joints[3] = 3 [18079.097588] GANTRYKINS: joints[4] = 4 [18079.097591] GANTRYKINS: joints[5] = 5 [18079.097594] GANTRYKINS: joints[6] = -1 [18079.097596] GANTRYKINS: joints[7] = -1 [18079.097599] GANTRYKINS: joints[8] = -1 [18079.154488] config string '0x378 out ' [18086.222304] RTAI[math]: unloaded. [18086.254730] SCHED releases registered named ALIEN RTGLBH [18086.284369] RTAI[malloc]: unloaded. [18086.389550] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [18086.392753] I-pipe: Domain RTAI unregistered. [18086.392840] RTAI[hal]: unmounted. [18827.246593] I-pipe: Domain RTAI registered. [18827.246601] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03. [18827.246604] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) . [18827.246650] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [18827.246652] PIPELINE layers: [18827.246655] fd004e20 9ac15d93 RTAI 200 [18827.246657] c085cb20 0 Linux 100 [18827.268187] RTAI[malloc]: global heap size = 2097152 bytes, . [18827.268667] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: , kstacks pool size = 524288 bytes. [18827.268675] RTAI[sched]: hard timer type/freq = APIC/12557115(Hz); default timing: periodic; linear timed lists. [18827.268679] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 2210391000 hz. [18827.268682] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [18827.268769] RTAI[usi]: enabled. [18827.318397] RTAI[math]: loaded. [18835.994635] RTAI[math]: unloaded. [18836.029645] SCHED releases registered named ALIEN RTGLBH [18836.060305] RTAI[malloc]: unloaded. [18836.160183] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [18836.163183] I-pipe: Domain RTAI unregistered. [18836.163270] RTAI[hal]: unmounted. [18876.145909] usb 1-2: new high speed USB device using ehci_hcd and address 5 [18876.289012] usb 1-2: configuration #1 chosen from 1 choice [18876.456652] scsi8 : SCSI emulation for USB Mass Storage devices [18876.457288] usb-storage: device found at 5 [18876.457290] usb-storage: waiting for device to settle before scanning [18881.457721] usb-storage: device scan complete [18881.459549] scsi 8:0:0:0: Direct-Access SanDisk Cruzer Micro 2033 PQ: 0 ANSI: 0 [18881.464399] sd 8:0:0:0: Attached scsi generic sg3 type 0 [18881.466919] sd 8:0:0:0: [sdc] 1024000 512-byte logical blocks: (524 MB/500 MiB) [18881.470586] sd 8:0:0:0: [sdc] Write Protect is off [18881.470589] sd 8:0:0:0: [sdc] Mode Sense: 00 00 00 00 [18881.470592] sd 8:0:0:0: [sdc] Assuming drive cache: write through [18881.476406] sd 8:0:0:0: [sdc] Assuming drive cache: write through [18881.476411] sdc: sdc1 [18881.482450] sd 8:0:0:0: [sdc] Assuming drive cache: write through [18881.482457] sd 8:0:0:0: [sdc] Attached SCSI removable disk