Can not find -sec MOT -var MOT -num 1 
Can not find -sec IO -var IO -num 1 
Can not find -sec LINUXCNC -var NML_FILE -num 1 
Can not find -sec EMC -var NML_FILE -num 1 
4526
  PID TTY      STAT   TIME COMMAND
4619
  PID TTY      STAT   TIME COMMAND
 4619 pts/3    S+     0:00 milltask -ini /home/dave/linuxcnc/configs/sim/axis/axis.ini
  PID TTY      STAT   TIME COMMAND
 4619 pts/3    S+     0:00 milltask -ini /home/dave/linuxcnc/configs/sim/axis/axis.ini
  PID TTY      STAT   TIME COMMAND
 4619 pts/3    S+     0:00 milltask -ini /home/dave/linuxcnc/configs/sim/axis/axis.ini
  PID TTY      STAT   TIME COMMAND
 4619 pts/3    S+     0:00 milltask -ini /home/dave/linuxcnc/configs/sim/axis/axis.ini
  PID TTY      STAT   TIME COMMAND
 4619 pts/3    R+     0:00 milltask -ini /home/dave/linuxcnc/configs/sim/axis/axis.ini
  PID TTY      STAT   TIME COMMAND
 4619 pts/3    S+     0:00 milltask -ini /home/dave/linuxcnc/configs/sim/axis/axis.ini
  PID TTY      STAT   TIME COMMAND
 4619 pts/3    S+     0:00 milltask -ini /home/dave/linuxcnc/configs/sim/axis/axis.ini
  PID TTY      STAT   TIME COMMAND
 4619 pts/3    S+     0:00 milltask -ini /home/dave/linuxcnc/configs/sim/axis/axis.ini
  PID TTY      STAT   TIME COMMAND
 4619 pts/3    S+     0:00 milltask -ini /home/dave/linuxcnc/configs/sim/axis/axis.ini
  PID TTY      STAT   TIME COMMAND
 4619 pts/3    R+     0:00 milltask -ini /home/dave/linuxcnc/configs/sim/axis/axis.ini
  PID TTY      STAT   TIME COMMAND
 4619 pts/3    S+     0:00 milltask -ini /home/dave/linuxcnc/configs/sim/axis/axis.ini
  PID TTY      STAT   TIME COMMAND
 4619 pts/3    S+     0:00 milltask -ini /home/dave/linuxcnc/configs/sim/axis/axis.ini
  PID TTY      STAT   TIME COMMAND
 4619 pts/3    S+     0:00 milltask -ini /home/dave/linuxcnc/configs/sim/axis/axis.ini
  PID TTY      STAT   TIME COMMAND
 4619 pts/3    S+     0:00 milltask -ini /home/dave/linuxcnc/configs/sim/axis/axis.ini
  PID TTY      STAT   TIME COMMAND
 4619 pts/3    S+     0:00 milltask -ini /home/dave/linuxcnc/configs/sim/axis/axis.ini
  PID TTY      STAT   TIME COMMAND
 4619 pts/3    S+     0:00 milltask -ini /home/dave/linuxcnc/configs/sim/axis/axis.ini
  PID TTY      STAT   TIME COMMAND
 4619 pts/3    S+     0:00 milltask -ini /home/dave/linuxcnc/configs/sim/axis/axis.ini
  PID TTY      STAT   TIME COMMAND
 4619 pts/3    S+     0:00 milltask -ini /home/dave/linuxcnc/configs/sim/axis/axis.ini
  PID TTY      STAT   TIME COMMAND
 4619 pts/3    S+     0:00 milltask -ini /home/dave/linuxcnc/configs/sim/axis/axis.ini
  PID TTY      STAT   TIME COMMAND
Stopping realtime threads
Unloading hal components