Starting LinuxCNC...

(gladevcp:31643): libglade-WARNING **: Expected <glade-interface>.  Got <interface>.

(gladevcp:31643): libglade-WARNING **: did not finish in PARSER_FINISH state
**** GLADE VCP INFO:    Not a libglade project, trying to load as a GTK builder project
Traceback (most recent call last):
  File "/usr/lib/pymodules/python2.6/gladevcp/hal_actions.py", line 67, in _f
    return f(self, *a, **kw)
  File "/usr/lib/pymodules/python2.6/gladevcp/hal_actions.py", line 140, in on_toggled
    return self.on_activate(w)
  File "/usr/lib/pymodules/python2.6/gladevcp/hal_actions.py", line 225, in on_activate
    self.linuxcnc.state(linuxcnc.STATE_ESTOP_RESET)
AttributeError: 'EMC_RadioAction_ESTOP_RESET' object has no attribute 'linuxcnc'
Traceback (most recent call last):
  File "/usr/lib/pymodules/python2.6/gladevcp/hal_actions.py", line 67, in _f
    return f(self, *a, **kw)
  File "/usr/lib/pymodules/python2.6/gladevcp/hal_actions.py", line 427, in on_toggled
    self.on_activate(w)
  File "/usr/lib/pymodules/python2.6/gladevcp/hal_actions.py", line 405, in on_activate
    ensure_mode(self.stat, self.linuxcnc, linuxcnc.MODE_MDI)
AttributeError: 'EMC_ToggleAction_MDI' object has no attribute 'stat'
Xlib.protocol.request.QueryExtension
Xlib.protocol.request.QueryExtension
Emit interp-run

/usr/bin/gladevcp:290: GtkWarning: GdkWindow 0x4000029 unexpectedly destroyed
  gtk.main()
**** GLADE VCP ERROR:    X Protocol Error: 3
Unexpected realtime delay: check dmesg for details.
Shutting down and cleaning up LinuxCNC...
RTAPI: ERROR: Unexpected realtime delay on task 1
This Message will only display once per session.
Run the Latency Test and resolve before continuing.