[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-122-rtai (root@moses-6core) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #rtai SMP Tue Jul 27 12:44:07 CDT 2010 (Ubuntu 2.6.32-122.35.rtai-rtai 2.6.32.11+drm33.2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] CPU: vendor_id 'Vortex86 SoC' unknown, using generic init. [ 0.000000] CPU: Your system may be unstable. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003e000000 (usable) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] DMI not present or invalid. [ 0.000000] last_pfn = 0x3e000 max_arch_pfn = 0x100000 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003e000000 (usable) [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 8b4000-995000 [ 0.000000] RAMDISK: 2dbb6000 - 2e83f601 [ 0.000000] ACPI Error: A valid RSDP was not found (20090903/tbxfroot-219) [ 0.000000] 104MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00007000 - 0000df00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008b0db8] TEXT DATA BSS ==> [0000100000 - 00008b0db8] [ 0.000000] #4 [002dbb6000 - 002e83f601] RAMDISK ==> [002dbb6000 - 002e83f601] [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #6 [00008b1000 - 00008b4000] BRK ==> [00008b1000 - 00008b4000] [ 0.000000] #7 [00008b4000 - 000098f000] PGTABLE ==> [00008b4000 - 000098f000] [ 0.000000] #8 [0000007000 - 000000e000] BOOTMAP ==> [0000007000 - 000000e000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003e000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003e000 [ 0.000000] On node 0 totalpages: 253851 [ 0.000000] free_area_init_node: node 0, pgdat c07470e0, node_mem_map c1001000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 209 pages used for memmap [ 0.000000] HighMem zone: 26417 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] SFI: Simple Firmware Interface v0.7 http://simplefirmware.org [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] No local APIC present or hardware disabled [ 0.000000] APIC: disable apic facility [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] Allocating PCI resources starting at 3e000000 (gap: 3e000000:c1000000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 24 pages/cpu @c17c7000 s74936 r0 d23368 u98304 [ 0.000000] pcpu-alloc: s74936 r0 d23368 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 251866 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-122-rtai root=UUID=58fc6dad-ea53-44ac-a2a3-1381c7e13be6 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 5079040 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003e000) [ 0.000000] Memory: 979596k/1015808k available (4539k kernel code, 35420k reserved, 1928k data, 620k init, 106504k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc0751000 - 0xc07ec000 ( 620 kB) [ 0.000000] .data : 0xc056ecbc - 0xc0750e68 (1928 kB) [ 0.000000] .text : 0xc0100000 - 0xc056ecbc (4539 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] I-pipe 2.6-03: pipeline enabled. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 933.263 MHz processor. [ 0.008014] Calibrating delay loop (skipped), value calculated using timer frequency.. 1866.52 BogoMIPS (lpj=3733052) [ 0.008102] Security Framework initialized [ 0.008217] AppArmor: AppArmor initialized [ 0.008250] Mount-cache hash table entries: 512 [ 0.012087] Initializing cgroup subsys ns [ 0.012104] Initializing cgroup subsys cpuacct [ 0.012127] Initializing cgroup subsys memory [ 0.012163] Initializing cgroup subsys devices [ 0.012177] Initializing cgroup subsys freezer [ 0.012190] Initializing cgroup subsys net_cls [ 0.012275] Performance Events: [ 0.012290] Checking 'hlt' instruction... OK. [ 0.028296] SMP alternatives: switching to UP code [ 0.037794] Freeing SMP alternatives: 31k freed [ 0.037868] ftrace: converting mcount calls to 66 66 66 66 90 [ 0.037894] ftrace: allocating 21003 entries in 42 pages [ 0.053764] Enabling APIC mode: Flat. Using 0 I/O APICs [ 0.053788] weird, boot CPU (#0) not listed by the BIOS. [ 0.053800] SMP motherboard not detected. [ 0.053812] Local APIC not detected. Using dummy APIC emulation. [ 0.053824] SMP disabled [ 0.054290] Brought up 1 CPUs [ 0.054303] Total of 1 processors activated (1866.52 BogoMIPS). [ 0.054347] CPU0 attaching NULL sched-domain. [ 0.054802] devtmpfs: initialized [ 0.056550] regulator: core version 0.5 [ 0.056784] NET: Registered protocol family 16 [ 0.057361] EISA bus registered [ 0.058336] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=0 [ 0.058350] PCI: Using configuration type 1 for base access [ 0.062617] bio: create slab at 0 [ 0.062820] ACPI: Interpreter disabled. [ 0.063046] vgaarb: loaded [ 0.063616] SCSI subsystem initialized [ 0.063782] libata version 3.00 loaded. [ 0.064122] usbcore: registered new interface driver usbfs [ 0.064185] usbcore: registered new interface driver hub [ 0.064310] usbcore: registered new device driver usb [ 0.064813] PCI: Probing PCI hardware [ 0.064825] PCI: Probing PCI hardware (bus 00) [ 0.065076] pci 0000:00:08.0: reg 10 io port: [0xde00-0xdeff] [ 0.065098] pci 0000:00:08.0: reg 14 32bit mmio: [0xfebdb400-0xfebdb4ff] [ 0.065134] pci 0000:00:08.0: reg 30 32bit mmio pref: [0xfebc0000-0xfebcffff] [ 0.065183] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfebd9000-0xfebd9fff] [ 0.065252] pci 0000:00:0a.1: reg 10 32bit mmio: [0xfebdb800-0xfebdb8ff] [ 0.065332] pci 0000:00:0b.0: reg 10 32bit mmio: [0xfebda000-0xfebdafff] [ 0.065400] pci 0000:00:0b.1: reg 10 32bit mmio: [0xfebdbc00-0xfebdbcff] [ 0.065475] pci 0000:00:0c.0: reg 10 io port: [0x00-0x07] [ 0.065494] pci 0000:00:0c.0: reg 14 io port: [0x00-0x03] [ 0.065514] pci 0000:00:0c.0: reg 18 io port: [0x00-0x07] [ 0.065533] pci 0000:00:0c.0: reg 1c io port: [0x00-0x03] [ 0.065553] pci 0000:00:0c.0: reg 20 io port: [0xef00-0xef0f] [ 0.065618] pci 0000:00:0d.0: reg 10 32bit mmio: [0xfc000000-0xfdffffff] [ 0.065640] pci 0000:00:0d.0: reg 14 32bit mmio: [0xfebe0000-0xfebfffff] [ 0.065662] pci 0000:00:0d.0: reg 18 io port: [0xdf80-0xdfff] [ 0.065707] pci 0000:00:0d.0: supports D1 D2 [ 0.065748] pci 0000:00:0e.0: reg 10 32bit mmio: [0xfebdc000-0xfebdffff] [ 0.066762] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none [ 0.067023] pci 0000:00:07.0: default IRQ router [17f3:6036] [ 0.067543] NetLabel: Initializing [ 0.067554] NetLabel: domain hash size = 128 [ 0.067564] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.067622] NetLabel: unlabeled traffic allowed by default [ 0.067752] Switching to clocksource tsc [ 0.072078] AppArmor: AppArmor Filesystem Enabled [ 0.072126] pnp: PnP ACPI: disabled [ 0.072139] PnPBIOS: Scanning system for PnP BIOS support... [ 0.072215] PnPBIOS: Found PnP BIOS installation structure at 0xc00f3140 [ 0.072235] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x3cba, dseg 0xf0000 [ 0.075808] PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver [ 0.075853] system 00:00: iomem range 0x0-0x9fbff could not be reserved [ 0.075873] system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved [ 0.075894] system 00:00: iomem range 0xe4000-0xfffff could not be reserved [ 0.075915] system 00:00: iomem range 0x100000-0x3dffffff could not be reserved [ 0.075935] system 00:00: iomem range 0xff000000-0xfffbffff has been reserved [ 0.075956] system 00:00: iomem range 0xfffc0000-0xffffffff has been reserved [ 0.075997] system 00:09: ioport range 0x4d0-0x4d1 has been reserved [ 0.076017] system 00:09: ioport range 0xcf8-0xcff could not be reserved [ 0.076037] system 00:09: ioport range 0xfc00-0xfc0f has been reserved [ 0.076071] system 00:0e: ioport range 0x3f0-0x3f5 has been reserved [ 0.076915] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.076933] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.077084] NET: Registered protocol family 2 [ 0.077539] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.079162] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.081631] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.082846] TCP: Hash tables configured (established 131072 bind 65536) [ 0.082860] TCP reno registered [ 0.083168] NET: Registered protocol family 1 [ 0.356234] pci 0000:00:0d.0: Boot video device [ 0.356628] Scanning for low memory corruption every 60 seconds [ 0.357124] audit: initializing netlink socket (disabled) [ 0.357167] type=2000 audit(1342466739.356:1): initialized [ 0.401676] Trying to unpack rootfs image as initramfs... [ 0.453092] highmem bounce pool size: 64 pages [ 0.453122] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.469427] VFS: Disk quotas dquot_6.5.2 [ 0.469826] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.477442] fuse init (API version 7.13) [ 0.477966] msgmni has been set to 1706 [ 0.484640] alg: No test for stdrng (krng) [ 0.484840] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.484857] io scheduler noop registered [ 0.484869] io scheduler anticipatory registered [ 0.484882] io scheduler deadline registered [ 0.485145] io scheduler cfq registered (default) [ 0.485533] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.485664] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.492258] isapnp: Scanning for PnP cards... [ 0.498748] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.498930] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.499241] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A [ 0.499419] serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A [ 0.500201] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.504694] 00:0b: ttyS2 at I/O 0x3e8 (irq = 10) is a 16550A [ 0.505033] 00:0c: ttyS3 at I/O 0x2e8 (irq = 11) is a 16550A [ 0.560413] brd: module loaded [ 0.563221] loop: module loaded [ 0.563672] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 0.569442] pata_acpi 0000:00:0c.0: setting latency timer to 64 [ 0.571301] Fixed MDIO Bus: probed [ 0.571518] PPP generic driver version 2.4.2 [ 0.571711] tun: Universal TUN/TAP device driver, 1.6 [ 0.571724] tun: (C) 1999-2004 Max Krasnyansky [ 0.572132] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.576290] ehci_hcd 0000:00:0a.1: EHCI Host Controller [ 0.576508] ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 1 [ 0.601175] ehci_hcd 0000:00:0a.1: irq 9, io mem 0xfebdb800 [ 0.647989] ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00 [ 0.648490] usb usb1: configuration #1 chosen from 1 choice [ 0.648644] hub 1-0:1.0: USB hub found [ 0.648682] hub 1-0:1.0: 2 ports detected [ 0.648920] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 0.649083] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2 [ 0.672272] ehci_hcd 0000:00:0b.1: irq 3, io mem 0xfebdbc00 [ 0.684887] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00 [ 0.685369] usb usb2: configuration #1 chosen from 1 choice [ 0.685523] hub 2-0:1.0: USB hub found [ 0.685576] hub 2-0:1.0: 2 ports detected [ 0.685849] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.685942] ohci_hcd 0000:00:0a.0: OHCI Host Controller [ 0.686106] ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 3 [ 0.686163] ohci_hcd 0000:00:0a.0: irq 9, io mem 0xfebd9000 [ 0.801547] usb usb3: configuration #1 chosen from 1 choice [ 0.801706] hub 3-0:1.0: USB hub found [ 0.801744] hub 3-0:1.0: 2 ports detected [ 0.801972] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 0.802163] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 4 [ 0.802227] ohci_hcd 0000:00:0b.0: irq 6, io mem 0xfebda000 [ 0.914067] usb usb4: configuration #1 chosen from 1 choice [ 0.914228] hub 4-0:1.0: USB hub found [ 0.914268] hub 4-0:1.0: 2 ports detected [ 0.914500] uhci_hcd: USB Universal Host Controller Interface driver [ 0.914897] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12 [ 0.922142] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.922179] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.922837] mice: PS/2 mouse device common for all mice [ 0.923253] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.923301] rtc0: alarms up to one day, 114 bytes nvram [ 0.923780] device-mapper: uevent: version 1.0.3 [ 0.926711] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.928778] device-mapper: multipath: version 1.1.0 loaded [ 0.928795] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.929430] EISA: Probing bus 0 at eisa.0 [ 0.929510] EISA: Detected 0 cards. [ 0.929523] cpuidle: using governor ladder [ 0.929535] cpuidle: using governor menu [ 0.931947] TCP cubic registered [ 0.932979] NET: Registered protocol family 10 [ 0.935343] lo: Disabled Privacy Extensions [ 0.941876] NET: Registered protocol family 17 [ 0.942017] Using IPI No-Shortcut mode [ 0.942432] registered taskstats version 1 [ 0.942896] rtc_cmos 00:04: setting system clock to 2012-07-16 19:25:40 UTC (1342466740) [ 0.942915] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.942927] EDD information not available. [ 0.988490] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 1.252876] isapnp: No Plug & Play device found [ 1.252944] usb 3-2: new low speed USB device using ohci_hcd and address 2 [ 1.462088] usb 3-2: configuration #1 chosen from 1 choice [ 2.325539] Freeing initrd memory: 12837k freed [ 2.343792] Freeing unused kernel memory: 620k freed [ 2.345166] Write protecting the kernel text: 4540k [ 2.345349] Write protecting the kernel read-only data: 1668k [ 2.429239] udev: starting version 151 [ 2.863175] pata_rdc 0000:00:0c.0: version 0.01 [ 2.877141] scsi0 : pata_rdc [ 2.880406] scsi1 : pata_rdc [ 2.880921] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xef00 irq 14 [ 2.880940] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xef08 irq 15 [ 2.924145] vga16fb: initializing [ 2.924168] vga16fb: mapped to 0xc00a0000 [ 2.924606] fb0: VGA16 VGA frame buffer device [ 3.044894] ata1.00: ATA-5: DMP CF 8G, 2.0, max UDMA/66 [ 3.044915] ata1.00: 15904224 sectors, multi 1: LBA [ 3.045039] ata1.00: limited to UDMA/33 due to 40-wire cable [ 3.060843] ata1.00: configured for UDMA/33 [ 3.061246] scsi 0:0:0:0: Direct-Access ATA DMP CF 8G 2.0 PQ: 0 ANSI: 5 [ 3.061923] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.062902] sd 0:0:0:0: [sda] 15904224 512-byte logical blocks: (8.14 GB/7.58 GiB) [ 3.063112] sd 0:0:0:0: [sda] Write Protect is off [ 3.063129] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.063237] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 3.063818] sda: sda1 sda2 < sda5 sda6 > [ 3.068191] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.127305] usbcore: registered new interface driver hiddev [ 3.137529] input: Microsoft Comfort Optical Mouse 1000 as /devices/pci0000:00/0000:00:0a.0/usb3/3-2/3-2:1.0/input/input2 [ 3.138347] generic-usb 0003:045E:00F6.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Comfort Optical Mouse 1000] on usb-0000:00:0a.0-2/input0 [ 3.138472] usbcore: registered new interface driver usbhid [ 3.138862] usbhid: v2.6:USB HID core driver [ 3.320915] Console: switching to colour frame buffer device 80x30 [ 4.589440] xor: measuring software checksum speed [ 4.608709] 8regs : 872.000 MB/sec [ 4.628712] 8regs_prefetch: 776.000 MB/sec [ 4.648715] 32regs : 515.000 MB/sec [ 4.668713] 32regs_prefetch: 481.000 MB/sec [ 4.688718] pII_mmx : 944.000 MB/sec [ 4.708719] p5_mmx : 887.000 MB/sec [ 4.708732] xor: using function: pII_mmx (944.000 MB/sec) [ 4.852610] device-mapper: dm-raid45: initialized v0.2594b [ 4.967825] EXT4-fs (sda5): mounted filesystem with ordered data mode [ 10.728176] Adding 235512k swap on /dev/sda6. Priority:-1 extents:1 across:235512k [ 11.110441] udev: starting version 151 [ 12.511277] lp: driver loaded but no devices found [ 12.933727] type=1505 audit(1342466752.486:2): operation="profile_load" pid=441 name="/sbin/dhclient3" [ 12.949739] type=1505 audit(1342466752.502:3): operation="profile_load" pid=441 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 12.952957] type=1505 audit(1342466752.506:4): operation="profile_load" pid=441 name="/usr/lib/connman/scripts/dhclient-script" [ 13.948980] type=1505 audit(1342466753.503:5): operation="profile_load" pid=539 name="/usr/share/gdm/guest-session/Xsession" [ 14.017290] type=1505 audit(1342466753.571:6): operation="profile_replace" pid=542 name="/sbin/dhclient3" [ 14.034552] type=1505 audit(1342466753.591:7): operation="profile_replace" pid=542 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 14.035262] type=1505 audit(1342466753.591:8): operation="profile_replace" pid=542 name="/usr/lib/connman/scripts/dhclient-script" [ 14.314559] type=1505 audit(1342466753.871:9): operation="profile_load" pid=544 name="/usr/bin/evince" [ 14.420730] type=1505 audit(1342466753.975:10): operation="profile_load" pid=544 name="/usr/bin/evince-previewer" [ 14.472388] type=1505 audit(1342466754.027:11): operation="profile_load" pid=544 name="/usr/bin/evince-thumbnailer" [ 15.491685] ppdev: user-space parallel port driver [ 84.230908] RTAI[hal]: ERROR, LOCAL APIC CONFIGURED BUT NOT AVAILABLE/ENABLED. [ 118.773222] RTAI[hal]: ERROR, LOCAL APIC CONFIGURED BUT NOT AVAILABLE/ENABLED. [ 119.913005] __ratelimit: 9 callbacks suppressed [ 119.913030] halcmd[1438]: segfault at 8 ip 00f8e6bc sp bffccff0 error 6 in liblinuxcnchal.so.0[f89000+8000] [ 119.927140] halcmd[1439]: segfault at 8 ip 00f316bc sp bfb8a190 error 6 in liblinuxcnchal.so.0[f2c000+8000] [ 119.962438] halcmd[1442]: segfault at 8 ip 005cc6bc sp bff48560 error 6 in liblinuxcnchal.so.0[5c7000+8000] [ 120.201464] halcmd[1446]: segfault at 8 ip 0025c6bc sp bfa78d70 error 6 in liblinuxcnchal.so.0[257000+8000] [ 120.437500] halcmd[1450]: segfault at 8 ip 005756bc sp bfbb7490 error 6 in liblinuxcnchal.so.0[570000+8000] [ 120.673605] halcmd[1454]: segfault at 8 ip 001646bc sp bfb478f0 error 6 in liblinuxcnchal.so.0[15f000+8000] [ 120.909576] halcmd[1458]: segfault at 8 ip 0073b6bc sp bfaf2b60 error 6 in liblinuxcnchal.so.0[736000+8000] [ 121.145554] halcmd[1462]: segfault at 8 ip 0076c6bc sp bf992fe0 error 6 in liblinuxcnchal.so.0[767000+8000] [ 121.381637] halcmd[1466]: segfault at 8 ip 007146bc sp bfca1160 error 6 in liblinuxcnchal.so.0[70f000+8000] [ 121.617613] halcmd[1470]: segfault at 8 ip 00c716bc sp bfe4bd70 error 6 in liblinuxcnchal.so.0[c6c000+8000]