Need electrical schematics for Maho MH 800 C

More
06 Jun 2018 20:25 #111787 by spec-cnc
Good day everyone,
My name is Volodymyr. I got a secondhand MAHO MH 800 C (CNC 432)
I am need of the electrical schematic diagram of this machine.
If anyone has a soft-copy (pdf, image file) of the schematics then please send me a copy to my email: This email address is being protected from spambots. You need JavaScript enabled to view it..
If there is a link where to get the scheme
I would be very grateful if you could.
Best regards,
Volodymyr

Please Log in or Create an account to join the conversation.

More
18 Feb 2021 18:13 #199318 by spec-cnc
Hello! I have the wiring diagrams of the machine. If you need wiring diagrams, write to the mail. Thank.

Please Log in or Create an account to join the conversation.

More
19 Feb 2021 00:27 #199361 by tommylight
I knew i know that name for before, she keeps going back and adding links, this was the third warning so she is out!
Bye PrincessJasmW !
The following user(s) said Thank You: Aciera

Please Log in or Create an account to join the conversation.

More
19 Feb 2021 09:49 #199390 by rodw

I knew i know that name for before, she keeps going back and adding links, this was the third warning so she is out!
Bye PrincessJasmW !


There should not be a warning on stuff like this. Just can them straight away Tommy
The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

More
19 Feb 2021 13:18 #199416 by tommylight
Being polite ! :)
Thanks for the reports, all.

Please Log in or Create an account to join the conversation.

More
19 Feb 2021 14:27 - 19 Feb 2021 14:37 #199437 by RotarySMP
I have been collecting all the Maho schematics I encounter. Dont have any for the 800C, but sent you to a set for a 700C.

These big machines were highly customised, so I doubt that any two schematics are identical based on ATC, pallet, fourth axis etc options. Also this model designation was used for a long time, so there are different generations of drives etc. But generally Maho was pretty consistant with there terminology, so I hope the 700C schematic helps a bit.

Also contact DMG. The schematic number for the machine should be on a sticker on the electrical cabinet door. They still have all the schematics for all these machines on file.
Mark
Last edit: 19 Feb 2021 14:37 by RotarySMP.

Please Log in or Create an account to join the conversation.

Moderators: piasdom
Time to create page: 0.093 seconds
Powered by Kunena Forum