LinuxCNC 2.7.14 and python3
01 May 2021 08:53 #207533
by elisa
LinuxCNC 2.7.14 and python3 was created by elisa
Hello everybody,
I'm having trouble using python3 in LinuxCNC 2.7.14.
When I run a Python script like:
" #!usr/bin/env python3
import hal
etc... "
I get this error:
"ImportError: no module named 'hal' "
Any suggestions?
Please write me soon!
I'm having trouble using python3 in LinuxCNC 2.7.14.
When I run a Python script like:
" #!usr/bin/env python3
import hal
etc... "
I get this error:
"ImportError: no module named 'hal' "
Any suggestions?
Please write me soon!
Please Log in or Create an account to join the conversation.
- BeagleBrainz
- Offline
- User is blocked
Less
More
- Posts: 1437
- Thank you received: 570
01 May 2021 09:55 #207537
by BeagleBrainz
Replied by BeagleBrainz on topic LinuxCNC 2.7.14 and python3
As far as I know only python2 is supported.
I'm not too sure how far, or if at all, master is working with python3 yet.
I'm not too sure how far, or if at all, master is working with python3 yet.
Please Log in or Create an account to join the conversation.
Time to create page: 0.112 seconds