Lpt bit in G-code

Hello, Can You help me?
I need to compare phisical input signal in G-code. How i can do it?
For Example:

G-code

#1 <= -its must be "connected" to parport1.bit1

O101 while [#1=1]
G1 X0 Y100
G1 X100 Y100
O101 endwhile

Thanx.

M66 might be what you want.

www.linuxcnc.org/docview/html//gcode_mai...ec:M66-Input-Control

John

Thank You for reply.
Yes M66 can translate signal to #5399 but I need more than 1 signal to transfer.
Task is :
Run separate pieces of code according to Hi-level on the pins.

Depending on which way you prefer:

M66 P1
#1 = #5399
M66 P2
#2 = #5399
M66 P3
#3 = #5399

Or, bit-map the result:

M66 P1
#1 = #5399
M66 P2
#1 = [#1 + 2 * #5399]
M66 P3
#1 = [#1 + 4 * #5399]

(etc)

Then build a set of IF statements arouind #1.

Thank You for reply.

I miss the P parametr in M66 . I think thats it !!!

May i ask enother question?

How i can "Connect" in HAL lpt bits to M66 P1, P2, e.t.c

Thank You

z_nick wrote:

How i can "Connect" in HAL lpt bits to M66 P1, P2, e.t.c

You only have 4 digital inputs by default, you can add more (up to 64 I think) by modifying the motion line in the HAL file using the num_dio parameter
linuxcnc.org/docs/html/man/man9/axis.9.html

You then just need to connect them up to p-port pins in the hal file.

net d1 parport.0.pin-10-in => motion.digital-in.00
net d2 parport.0.pin-11-in => motion.digital-in.01

and so on.

(Start emc from the command line by typing emc, you get to see what you have miss-typed that way)