5 Axis ParPort Stepper Setup with RTCP

You're my hero.... I learned a lot from you directly and indirectly. Soooo much respect ... You are my GURU

Hi marq_torque,

I'm sorry! Maybe my English is not good, but I hope you can help me

I'm from Indonesia, and i'm is beginners about linux cnc.

I also want to buil 5 axis configuration.. What version of your ubuntu? i use ubuntu 10.04 and i can not find 5axiskins.h. can you help me? how to you can get it.

can you show me tutorial, how to build tk simulation like this:

fery15sty wrote: can you show me tutorial, how to build tk simulation like this:

www.linuxcnc.org/docs/html/gui/vismach.html

First of all update your EMC Version, then you browse to specified kinematics folder and check, i also tried on ubuntu-10.04-linuxcnc1-i386

fery15sty wrote: Hi marq_torque,

I'm sorry! Maybe my English is not good, but I hope you can help me

I'm from Indonesia, and i'm is beginners about linux cnc.

I also want to buil 5 axis configuration.. What version of your ubuntu? i use ubuntu 10.04 and i can not find 5axiskins.h. can you help me? how to you can get it.

I have update linuxcnc 2.7.0.

i can not find folder kinematic, 5axiskins.c, pumakins.c, scarakins.c, ..... etc.

i just find 5axiskins.ko, genserkins.ko, pumakins.ko, ... etc on folder system/usr/realtime-2.6.32-122-rtai/modules/linuxcnc/

How to i have kinematic file *.c for example..

Please help me..

[quote="fery15sty" post=62707i can not find folder kinematic, 5axiskins.c, pumakins.c, scarakins.c, ..... etc.[/quote]

You need the source code.

(and, also, probably, the linuxcnc-dev package from the package manager)

To get all the source code you would want to install git and clone the repository: linuxcnc.org/docs/html/code/contributing-to-linuxcnc.html
But to work on just a single kinematics file you can probably just get the file from: git.linuxcnc.org/gitweb?p=linuxcnc.git;a...98763c65a3e58199e14e
(right-click the "raw" link of the files you want)

i was upgrde linuxcnc-dev package on package manager but i can not find kinematics file on my pc..

fery15sty wrote: i was upgrde linuxcnc-dev package on package manager but i can not find kinematics file on my pc..

You won't find _any_ source code files unless you download the source code.
But you can get individual files from the second link.

Okey Andy, thanks for this link..

git.linuxcnc.org/gitweb?p=linuxcnc.git;a...98763c65a3e58199e14e

I try to learn it..