cmorley wrote: Not sure what kind of buttons you wish to use.
If you wish to use real buttons that are _not_ momentary such as a rotary switch or
GLADEVCP radio buttons this should work:
Code:
# mux16 is used to select percentage output based on
# bit input patterns - This is named to reflect feed override use
loadrt mux16 names=foincr
must add mux16 to a thread
addf foincr servo-thread
# connect feed overide increments - switches
# need to connect the signals to actual swicthes
net fo-incr-button-a => foincr.sel0
net fo-incr-button-b => foincr.sel1
net fo-incr-button-c => foincr.sel2
net fo-incr-button-d => foincr.sel3
# set up and connect halui feedoverride
setp halui.feed-override.count-enable true
setp halui.feed-override.direct-value true
setp halui.feed-override.scale .01
net feedoverride-incr => halui.feed-override.counts
net feedoverride-incr <= foincr.out-s
# set mux16 options and override percentages
setp foincr.debounce-time 0.200000
setp foincr.use-graycode False
setp foincr.suppress-no-input False
setp foincr.in00 0.000000
setp foincr.in01 5.000000
setp foincr.in02 10.000000
setp foincr.in04 50.000000
setp foincr.in08 110.000000
signals fo-incr-button-a etc need to be connected to actual buttons.
This is exactly what i need. Thanks dude...
But I want to know / do sth more. As you sad this code is perfect with radio_buttons. I defined 4 buttons like btn1=5,btn2=10,btn3=50,btn4=110. But if i checked except these, the feed-override becomes 0. Is there anyway to make feed-override stay on its last value ?
Such as if i lastly checked on 4th button , fo becomes 110 and after I unchecked 4th button ( assuming 1st,2nd and 3rd buttons are unchecked), can it be stay on 110 ?
