Gcode last row

More
10 years 7 months ago #72379 by bkt
Gcode last row was created by bkt
I'm not able to find where Lcnc store last row number of running gcode .... it must be stored somewhere else how do you make the pause and resume ? var in the file ?

regards
Giorgio

Please Log in to join the conversation.

More
10 years 7 months ago #72380 by bkt
Replied by bkt on topic Gcode last row
in var file no for shure ....

Please Log in to join the conversation.

More
10 years 7 months ago #72381 by andypugh
Replied by andypugh on topic Gcode last row
It is visible in the hal pin motion.program-line.

also in linuxcnc.stat.current_line
linuxcnc.org/docs/2.7/html/config/python-interface.html

Please Log in to join the conversation.

Time to create page: 0.069 seconds
Powered by Kunena Forum