Gentrivkins replaced by Trivkins in Master, any issues?

More
9 years 10 months ago #83982 by guymalpass
Gentrivkins replaced by Trivkins in Master, any issues? was created by guymalpass
Hi,
I have been using the JA9 branch for a while now successfully but have recently moved to Master since joints_axes was merged. However I am now getting some strange movements which are triggering following errors.
Are there currently any known problems with trajectory planning in master?
Cheers,
Guy

Please Log in to join the conversation.

More
9 years 10 months ago #83991 by Todd Zuercher
Replied by Todd Zuercher on topic Gentrivkins replaced by Trivkins in Master, any issues?
Not that I'm aware of. (but that doesn't mean that you could not have uncovered a bug.)
Give us a better description of your problems.

Please Log in to join the conversation.

More
9 years 10 months ago #83992 by guymalpass
Replied by guymalpass on topic Gentrivkins replaced by Trivkins in Master, any issues?
Here is a photo of my live tool plot, the problem occurs when it transitions from gcode line 34 to 35. As can be seen from the plot it doesn't attempt to go round the arc.

Please Log in to join the conversation.

More
9 years 10 months ago #83993 by guymalpass
Replied by guymalpass on topic Gentrivkins replaced by Trivkins in Master, any issues?
goo.gl/photos/jyCbxXy7A5tJsKCq6

Please Log in to join the conversation.

More
9 years 10 months ago #83996 by guymalpass
Replied by guymalpass on topic Gentrivkins replaced by Trivkins in Master, any issues?
I have set ARC_BLEND_ENABLE to false and the program is now running fine so maybe there is a bug there somewhere? What information can I provide that may be useful in finding out what's going on here?

Please Log in to join the conversation.

More
9 years 10 months ago #84004 by tommylight
Replied by tommylight on topic Gentrivkins replaced by Trivkins in Master, any issues?
You can also use G64 Pxxx where xxx is the tolerance you want from the actual line. That is a result of high speed and high acceleration, not a bug.

Please Log in to join the conversation.

More
9 years 10 months ago #84005 by guymalpass
Replied by guymalpass on topic Gentrivkins replaced by Trivkins in Master, any issues?
I do use a G64 term with P and Q tolerances. This error has begun since I moved to master from the JA9 branch

Please Log in to join the conversation.

More
9 years 10 months ago #84006 by tommylight
Replied by tommylight on topic Gentrivkins replaced by Trivkins in Master, any issues?
I was just reading your reply on the other thread. I had the same problem when i moved from 2.5.4 to 2.7pre, but much worse, but using G64 worked like a charm. Disabling path blending also works, but i do not know if it affects anything else.
Do the same test with half the speed, see if it will follow the given line properly.

Please Log in to join the conversation.

More
9 years 10 months ago #84228 by guymalpass
Replied by guymalpass on topic Gentrivkins replaced by Trivkins in Master, any issues?
Hi Tommy, looks like you were spot on, I dropped my acceleration and now all is well. I am surprised considering how long I have been running it for without issue. Thanks for your help.

Please Log in to join the conversation.

More
9 years 10 months ago #84229 by tommylight
Replied by tommylight on topic Gentrivkins replaced by Trivkins in Master, any issues?
You are welcomed, always.

Please Log in to join the conversation.

Time to create page: 0.093 seconds
Powered by Kunena Forum